| 1 |
// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) |
| 2 |
/* |
| 3 |
* Copyright (C) Linaro Ltd 2019 - All Rights Reserved |
| 4 |
* Author: Manivannan Sadhasivam <[email protected]> |
| 5 |
* Copyright (C) 2020 Marek Vasut <[email protected]> |
| 6 |
*/ |
| 7 |
|
| 8 |
#include "stm32mp15-pinctrl.dtsi" |
| 9 |
#include "stm32mp15xxac-pinctrl.dtsi" |
| 10 |
#include <dt-bindings/gpio/gpio.h> |
| 11 |
#include <dt-bindings/mfd/st,stpmic1.h> |
| 12 |
|
| 13 |
/ { |
| 14 |
aliases { |
| 15 |
spi0 = &qspi; |
| 16 |
}; |
| 17 |
|
| 18 |
memory@c0000000 { |
| 19 |
device_type = "memory"; |
| 20 |
reg = <0xc0000000 0x40000000>; |
| 21 |
}; |
| 22 |
|
| 23 |
reserved-memory { |
| 24 |
#address-cells = <1>; |
| 25 |
#size-cells = <1>; |
| 26 |
ranges; |
| 27 |
|
| 28 |
mcuram2: mcuram2@10000000 { |
| 29 |
compatible = "shared-dma-pool"; |
| 30 |
reg = <0x10000000 0x40000>; |
| 31 |
no-map; |
| 32 |
}; |
| 33 |
|
| 34 |
vdev0vring0: vdev0vring0@10040000 { |
| 35 |
compatible = "shared-dma-pool"; |
| 36 |
reg = <0x10040000 0x1000>; |
| 37 |
no-map; |
| 38 |
}; |
| 39 |
|
| 40 |
vdev0vring1: vdev0vring1@10041000 { |
| 41 |
compatible = "shared-dma-pool"; |
| 42 |
reg = <0x10041000 0x1000>; |
| 43 |
no-map; |
| 44 |
}; |
| 45 |
|
| 46 |
vdev0buffer: vdev0buffer@10042000 { |
| 47 |
compatible = "shared-dma-pool"; |
| 48 |
reg = <0x10042000 0x4000>; |
| 49 |
no-map; |
| 50 |
}; |
| 51 |
|
| 52 |
mcuram: mcuram@30000000 { |
| 53 |
compatible = "shared-dma-pool"; |
| 54 |
reg = <0x30000000 0x40000>; |
| 55 |
no-map; |
| 56 |
}; |
| 57 |
|
| 58 |
retram: retram@38000000 { |
| 59 |
compatible = "shared-dma-pool"; |
| 60 |
reg = <0x38000000 0x10000>; |
| 61 |
no-map; |
| 62 |
}; |
| 63 |
}; |
| 64 |
}; |
| 65 |
|
| 66 |
&crc1 { |
| 67 |
status = "okay"; |
| 68 |
}; |
| 69 |
|
| 70 |
&dts { |
| 71 |
status = "okay"; |
| 72 |
}; |
| 73 |
|
| 74 |
&i2c4 { |
| 75 |
pinctrl-names = "default"; |
| 76 |
pinctrl-0 = <&i2c4_pins_a>; |
| 77 |
i2c-scl-rising-time-ns = <185>; |
| 78 |
i2c-scl-falling-time-ns = <20>; |
| 79 |
status = "okay"; |
| 80 |
/delete-property/dmas; |
| 81 |
/delete-property/dma-names; |
| 82 |
|
| 83 |
pmic: stpmic@33 { |
| 84 |
compatible = "st,stpmic1"; |
| 85 |
reg = <0x33>; |
| 86 |
interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; |
| 87 |
interrupt-controller; |
| 88 |
#interrupt-cells = <2>; |
| 89 |
status = "okay"; |
| 90 |
|
| 91 |
regulators { |
| 92 |
compatible = "st,stpmic1-regulators"; |
| 93 |
|
| 94 |
ldo1-supply = <&v3v3>; |
| 95 |
ldo2-supply = <&v3v3>; |
| 96 |
ldo3-supply = <&vdd_ddr>; |
| 97 |
ldo5-supply = <&v3v3>; |
| 98 |
ldo6-supply = <&v3v3>; |
| 99 |
pwr_sw1-supply = <&bst_out>; |
| 100 |
pwr_sw2-supply = <&bst_out>; |
| 101 |
|
| 102 |
vddcore: buck1 { |
| 103 |
regulator-name = "vddcore"; |
| 104 |
regulator-min-microvolt = <1200000>; |
| 105 |
regulator-max-microvolt = <1350000>; |
| 106 |
regulator-always-on; |
| 107 |
regulator-initial-mode = <0>; |
| 108 |
regulator-over-current-protection; |
| 109 |
}; |
| 110 |
|
| 111 |
vdd_ddr: buck2 { |
| 112 |
regulator-name = "vdd_ddr"; |
| 113 |
regulator-min-microvolt = <1350000>; |
| 114 |
regulator-max-microvolt = <1350000>; |
| 115 |
regulator-always-on; |
| 116 |
regulator-initial-mode = <0>; |
| 117 |
regulator-over-current-protection; |
| 118 |
}; |
| 119 |
|
| 120 |
vdd: buck3 { |
| 121 |
regulator-name = "vdd"; |
| 122 |
regulator-min-microvolt = <3300000>; |
| 123 |
regulator-max-microvolt = <3300000>; |
| 124 |
regulator-always-on; |
| 125 |
regulator-initial-mode = <0>; |
| 126 |
regulator-over-current-protection; |
| 127 |
}; |
| 128 |
|
| 129 |
v3v3: buck4 { |
| 130 |
regulator-name = "v3v3"; |
| 131 |
regulator-min-microvolt = <3300000>; |
| 132 |
regulator-max-microvolt = <3300000>; |
| 133 |
regulator-always-on; |
| 134 |
regulator-over-current-protection; |
| 135 |
regulator-initial-mode = <0>; |
| 136 |
}; |
| 137 |
|
| 138 |
vdda: ldo1 { |
| 139 |
regulator-name = "vdda"; |
| 140 |
regulator-min-microvolt = <2900000>; |
| 141 |
regulator-max-microvolt = <2900000>; |
| 142 |
interrupts = <IT_CURLIM_LDO1 0>; |
| 143 |
}; |
| 144 |
|
| 145 |
v2v8: ldo2 { |
| 146 |
regulator-name = "v2v8"; |
| 147 |
regulator-min-microvolt = <2800000>; |
| 148 |
regulator-max-microvolt = <2800000>; |
| 149 |
interrupts = <IT_CURLIM_LDO2 0>; |
| 150 |
}; |
| 151 |
|
| 152 |
vtt_ddr: ldo3 { |
| 153 |
regulator-name = "vtt_ddr"; |
| 154 |
regulator-min-microvolt = <500000>; |
| 155 |
regulator-max-microvolt = <750000>; |
| 156 |
regulator-always-on; |
| 157 |
regulator-over-current-protection; |
| 158 |
}; |
| 159 |
|
| 160 |
vdd_usb: ldo4 { |
| 161 |
regulator-name = "vdd_usb"; |
| 162 |
interrupts = <IT_CURLIM_LDO4 0>; |
| 163 |
}; |
| 164 |
|
| 165 |
vdd_sd: ldo5 { |
| 166 |
regulator-name = "vdd_sd"; |
| 167 |
regulator-min-microvolt = <2900000>; |
| 168 |
regulator-max-microvolt = <2900000>; |
| 169 |
interrupts = <IT_CURLIM_LDO5 0>; |
| 170 |
regulator-boot-on; |
| 171 |
}; |
| 172 |
|
| 173 |
v1v8: ldo6 { |
| 174 |
regulator-name = "v1v8"; |
| 175 |
regulator-min-microvolt = <1800000>; |
| 176 |
regulator-max-microvolt = <1800000>; |
| 177 |
interrupts = <IT_CURLIM_LDO6 0>; |
| 178 |
regulator-enable-ramp-delay = <300000>; |
| 179 |
}; |
| 180 |
|
| 181 |
vref_ddr: vref_ddr { |
| 182 |
regulator-name = "vref_ddr"; |
| 183 |
regulator-always-on; |
| 184 |
}; |
| 185 |
|
| 186 |
bst_out: boost { |
| 187 |
regulator-name = "bst_out"; |
| 188 |
interrupts = <IT_OCP_BOOST 0>; |
| 189 |
}; |
| 190 |
|
| 191 |
vbus_otg: pwr_sw1 { |
| 192 |
regulator-name = "vbus_otg"; |
| 193 |
interrupts = <IT_OCP_OTG 0>; |
| 194 |
regulator-active-discharge = <1>; |
| 195 |
}; |
| 196 |
|
| 197 |
vbus_sw: pwr_sw2 { |
| 198 |
regulator-name = "vbus_sw"; |
| 199 |
interrupts = <IT_OCP_SWOUT 0>; |
| 200 |
regulator-active-discharge = <1>; |
| 201 |
}; |
| 202 |
}; |
| 203 |
|
| 204 |
onkey { |
| 205 |
compatible = "st,stpmic1-onkey"; |
| 206 |
interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>; |
| 207 |
interrupt-names = "onkey-falling", "onkey-rising"; |
| 208 |
status = "okay"; |
| 209 |
}; |
| 210 |
|
| 211 |
watchdog { |
| 212 |
compatible = "st,stpmic1-wdt"; |
| 213 |
status = "disabled"; |
| 214 |
}; |
| 215 |
}; |
| 216 |
}; |
| 217 |
|
| 218 |
&ipcc { |
| 219 |
status = "okay"; |
| 220 |
}; |
| 221 |
|
| 222 |
&iwdg2 { |
| 223 |
timeout-sec = <32>; |
| 224 |
status = "okay"; |
| 225 |
}; |
| 226 |
|
| 227 |
&m4_rproc { |
| 228 |
memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, |
| 229 |
<&vdev0vring1>, <&vdev0buffer>; |
| 230 |
mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>; |
| 231 |
mbox-names = "vq0", "vq1", "shutdown", "detach"; |
| 232 |
interrupt-parent = <&exti>; |
| 233 |
interrupts = <68 1>; |
| 234 |
status = "okay"; |
| 235 |
}; |
| 236 |
|
| 237 |
&pwr_regulators { |
| 238 |
vdd-supply = <&vdd>; |
| 239 |
vdd_3v3_usbfs-supply = <&vdd_usb>; |
| 240 |
}; |
| 241 |
|
| 242 |
&qspi { |
| 243 |
pinctrl-names = "default", "sleep"; |
| 244 |
pinctrl-0 = <&qspi_clk_pins_a |
| 245 |
&qspi_bk1_pins_a |
| 246 |
&qspi_cs1_pins_a>; |
| 247 |
pinctrl-1 = <&qspi_clk_sleep_pins_a |
| 248 |
&qspi_bk1_sleep_pins_a |
| 249 |
&qspi_cs1_sleep_pins_a>; |
| 250 |
reg = <0x58003000 0x1000>, <0x70000000 0x200000>; |
| 251 |
#address-cells = <1>; |
| 252 |
#size-cells = <0>; |
| 253 |
status = "okay"; |
| 254 |
|
| 255 |
flash0: flash@0 { |
| 256 |
compatible = "jedec,spi-nor"; |
| 257 |
reg = <0>; |
| 258 |
spi-rx-bus-width = <4>; |
| 259 |
spi-max-frequency = <50000000>; |
| 260 |
#address-cells = <1>; |
| 261 |
#size-cells = <1>; |
| 262 |
}; |
| 263 |
}; |
| 264 |
|
| 265 |
&rng1 { |
| 266 |
status = "okay"; |
| 267 |
}; |
| 268 |
|
| 269 |
&rtc { |
| 270 |
status = "okay"; |
| 271 |
}; |