| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) |
| 2 |
/* |
| 3 |
* Copyright (C) 2020 Marcin Sloniewski <[email protected]>. |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
|
| 8 |
#include "stm32mp157c-odyssey-som.dtsi" |
| 9 |
|
| 10 |
/ { |
| 11 |
model = "Seeed Studio Odyssey-STM32MP157C Board"; |
| 12 |
compatible = "seeed,stm32mp157c-odyssey", |
| 13 |
"seeed,stm32mp157c-odyssey-som", "st,stm32mp157"; |
| 14 |
|
| 15 |
aliases { |
| 16 |
ethernet0 = ðernet0; |
| 17 |
serial0 = &uart4; |
| 18 |
}; |
| 19 |
|
| 20 |
chosen { |
| 21 |
stdout-path = "serial0:115200n8"; |
| 22 |
}; |
| 23 |
}; |
| 24 |
|
| 25 |
&dcmi { |
| 26 |
pinctrl-names = "default", "sleep"; |
| 27 |
pinctrl-0 = <&dcmi_pins_b>; |
| 28 |
pinctrl-1 = <&dcmi_sleep_pins_b>; |
| 29 |
}; |
| 30 |
|
| 31 |
ðernet0 { |
| 32 |
status = "okay"; |
| 33 |
pinctrl-0 = <ðernet0_rgmii_pins_a>; |
| 34 |
pinctrl-1 = <ðernet0_rgmii_sleep_pins_a>; |
| 35 |
pinctrl-names = "default", "sleep"; |
| 36 |
phy-mode = "rgmii-id"; |
| 37 |
max-speed = <1000>; |
| 38 |
phy-handle = <&phy0>; |
| 39 |
assigned-clocks = <&rcc ETHCK_K>, <&rcc PLL4_P>; |
| 40 |
assigned-clock-parents = <&rcc PLL4_P>; |
| 41 |
assigned-clock-rates = <125000000>; /* Clock PLL4 to 750Mhz in ATF/U-Boot */ |
| 42 |
st,eth-clk-sel; |
| 43 |
|
| 44 |
mdio { |
| 45 |
#address-cells = <1>; |
| 46 |
#size-cells = <0>; |
| 47 |
compatible = "snps,dwmac-mdio"; |
| 48 |
phy0: ethernet-phy@7 { /* KSZ9031RN */ |
| 49 |
reg = <7>; |
| 50 |
reset-gpios = <&gpiog 0 GPIO_ACTIVE_LOW>; /* ETH_RST# */ |
| 51 |
reset-assert-us = <10000>; |
| 52 |
reset-deassert-us = <300>; |
| 53 |
}; |
| 54 |
}; |
| 55 |
}; |
| 56 |
|
| 57 |
&i2c1 { |
| 58 |
pinctrl-names = "default", "sleep"; |
| 59 |
pinctrl-0 = <&i2c1_pins_a>; |
| 60 |
pinctrl-1 = <&i2c1_sleep_pins_a>; |
| 61 |
i2c-scl-rising-time-ns = <100>; |
| 62 |
i2c-scl-falling-time-ns = <7>; |
| 63 |
status = "okay"; |
| 64 |
/delete-property/dmas; |
| 65 |
/delete-property/dma-names; |
| 66 |
}; |
| 67 |
|
| 68 |
&sdmmc1 { |
| 69 |
pinctrl-names = "default", "opendrain", "sleep"; |
| 70 |
pinctrl-0 = <&sdmmc1_b4_pins_a>; |
| 71 |
pinctrl-1 = <&sdmmc1_b4_od_pins_a>; |
| 72 |
pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; |
| 73 |
cd-gpios = <&gpioi 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; |
| 74 |
disable-wp; |
| 75 |
st,neg-edge; |
| 76 |
bus-width = <4>; |
| 77 |
vmmc-supply = <&v3v3>; |
| 78 |
status = "okay"; |
| 79 |
}; |
| 80 |
|
| 81 |
&uart4 { |
| 82 |
pinctrl-names = "default"; |
| 83 |
pinctrl-0 = <&uart4_pins_a>; |
| 84 |
/delete-property/dmas; |
| 85 |
/delete-property/dma-names; |
| 86 |
status = "okay"; |
| 87 |
}; |
| 88 |
|