| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* DTS file for all SPEAr1310 SoCs |
| 4 |
* |
| 5 |
* Copyright 2012 Viresh Kumar <[email protected]> |
| 6 |
*/ |
| 7 |
|
| 8 |
/include/ "spear13xx.dtsi" |
| 9 |
|
| 10 |
/ { |
| 11 |
compatible = "st,spear1310"; |
| 12 |
|
| 13 |
ahb { |
| 14 |
spics: spics@e0700000 { |
| 15 |
compatible = "st,spear-spics-gpio"; |
| 16 |
reg = <0xe0700000 0x1000>; |
| 17 |
st-spics,peripcfg-reg = <0x3b0>; |
| 18 |
st-spics,sw-enable-bit = <12>; |
| 19 |
st-spics,cs-value-bit = <11>; |
| 20 |
st-spics,cs-enable-mask = <3>; |
| 21 |
st-spics,cs-enable-shift = <8>; |
| 22 |
gpio-controller; |
| 23 |
#gpio-cells = <2>; |
| 24 |
}; |
| 25 |
|
| 26 |
miphy0: miphy@eb800000 { |
| 27 |
compatible = "st,spear1310-miphy"; |
| 28 |
reg = <0xeb800000 0x4000>; |
| 29 |
misc = <&misc>; |
| 30 |
phy-id = <0>; |
| 31 |
#phy-cells = <1>; |
| 32 |
status = "disabled"; |
| 33 |
}; |
| 34 |
|
| 35 |
miphy1: miphy@eb804000 { |
| 36 |
compatible = "st,spear1310-miphy"; |
| 37 |
reg = <0xeb804000 0x4000>; |
| 38 |
misc = <&misc>; |
| 39 |
phy-id = <1>; |
| 40 |
#phy-cells = <1>; |
| 41 |
status = "disabled"; |
| 42 |
}; |
| 43 |
|
| 44 |
miphy2: miphy@eb808000 { |
| 45 |
compatible = "st,spear1310-miphy"; |
| 46 |
reg = <0xeb808000 0x4000>; |
| 47 |
misc = <&misc>; |
| 48 |
phy-id = <2>; |
| 49 |
#phy-cells = <1>; |
| 50 |
status = "disabled"; |
| 51 |
}; |
| 52 |
|
| 53 |
ahci0: ahci@b1000000 { |
| 54 |
compatible = "snps,spear-ahci"; |
| 55 |
reg = <0xb1000000 0x10000>; |
| 56 |
interrupts = <0 68 0x4>; |
| 57 |
phys = <&miphy0 0>; |
| 58 |
phy-names = "sata-phy"; |
| 59 |
status = "disabled"; |
| 60 |
}; |
| 61 |
|
| 62 |
ahci1: ahci@b1800000 { |
| 63 |
compatible = "snps,spear-ahci"; |
| 64 |
reg = <0xb1800000 0x10000>; |
| 65 |
interrupts = <0 69 0x4>; |
| 66 |
phys = <&miphy1 0>; |
| 67 |
phy-names = "sata-phy"; |
| 68 |
status = "disabled"; |
| 69 |
}; |
| 70 |
|
| 71 |
ahci2: ahci@b4000000 { |
| 72 |
compatible = "snps,spear-ahci"; |
| 73 |
reg = <0xb4000000 0x10000>; |
| 74 |
interrupts = <0 70 0x4>; |
| 75 |
phys = <&miphy2 0>; |
| 76 |
phy-names = "sata-phy"; |
| 77 |
status = "disabled"; |
| 78 |
}; |
| 79 |
|
| 80 |
pcie0: pcie@b1000000 { |
| 81 |
compatible = "st,spear1340-pcie", "snps,dw-pcie"; |
| 82 |
reg = <0xb1000000 0x4000>, <0x80000000 0x20000>; |
| 83 |
reg-names = "dbi", "config"; |
| 84 |
interrupts = <0 68 0x4>; |
| 85 |
num-lanes = <1>; |
| 86 |
phys = <&miphy0 1>; |
| 87 |
phy-names = "pcie-phy"; |
| 88 |
#address-cells = <3>; |
| 89 |
#size-cells = <2>; |
| 90 |
device_type = "pci"; |
| 91 |
ranges = <0x81000000 0 0 0x80020000 0 0x00010000 /* downstream I/O */ |
| 92 |
0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */ |
| 93 |
bus-range = <0x00 0xff>; |
| 94 |
status = "disabled"; |
| 95 |
}; |
| 96 |
|
| 97 |
pcie1: pcie@b1800000 { |
| 98 |
compatible = "st,spear1340-pcie", "snps,dw-pcie"; |
| 99 |
reg = <0xb1800000 0x4000>, <0x90000000 0x20000>; |
| 100 |
reg-names = "dbi", "config"; |
| 101 |
interrupts = <0 69 0x4>; |
| 102 |
num-lanes = <1>; |
| 103 |
phys = <&miphy1 1>; |
| 104 |
phy-names = "pcie-phy"; |
| 105 |
#address-cells = <3>; |
| 106 |
#size-cells = <2>; |
| 107 |
device_type = "pci"; |
| 108 |
ranges = <0x81000000 0 0 0x90020000 0 0x00010000 /* downstream I/O */ |
| 109 |
0x82000000 0 0x90030000 0x90030000 0 0x0ffd0000>; /* non-prefetchable memory */ |
| 110 |
bus-range = <0x00 0xff>; |
| 111 |
status = "disabled"; |
| 112 |
}; |
| 113 |
|
| 114 |
pcie2: pcie@b4000000 { |
| 115 |
compatible = "st,spear1340-pcie", "snps,dw-pcie"; |
| 116 |
reg = <0xb4000000 0x4000>, <0xc0000000 0x20000>; |
| 117 |
reg-names = "dbi", "config"; |
| 118 |
interrupts = <0 70 0x4>; |
| 119 |
num-lanes = <1>; |
| 120 |
phys = <&miphy2 1>; |
| 121 |
phy-names = "pcie-phy"; |
| 122 |
#address-cells = <3>; |
| 123 |
#size-cells = <2>; |
| 124 |
device_type = "pci"; |
| 125 |
ranges = <0x81000000 0 0 0xc0020000 0 0x00010000 /* downstream I/O */ |
| 126 |
0x82000000 0 0xc0030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */ |
| 127 |
bus-range = <0x00 0xff>; |
| 128 |
status = "disabled"; |
| 129 |
}; |
| 130 |
|
| 131 |
gmac1: ethernet@5c400000 { |
| 132 |
compatible = "st,spear600-gmac"; |
| 133 |
reg = <0x5c400000 0x8000>; |
| 134 |
interrupts = <0 95 0x4>; |
| 135 |
interrupt-names = "macirq"; |
| 136 |
phy-mode = "mii"; |
| 137 |
status = "disabled"; |
| 138 |
}; |
| 139 |
|
| 140 |
gmac2: ethernet@5c500000 { |
| 141 |
compatible = "st,spear600-gmac"; |
| 142 |
reg = <0x5c500000 0x8000>; |
| 143 |
interrupts = <0 96 0x4>; |
| 144 |
interrupt-names = "macirq"; |
| 145 |
phy-mode = "mii"; |
| 146 |
status = "disabled"; |
| 147 |
}; |
| 148 |
|
| 149 |
gmac3: ethernet@5c600000 { |
| 150 |
compatible = "st,spear600-gmac"; |
| 151 |
reg = <0x5c600000 0x8000>; |
| 152 |
interrupts = <0 97 0x4>; |
| 153 |
interrupt-names = "macirq"; |
| 154 |
phy-mode = "rmii"; |
| 155 |
status = "disabled"; |
| 156 |
}; |
| 157 |
|
| 158 |
gmac4: ethernet@5c700000 { |
| 159 |
compatible = "st,spear600-gmac"; |
| 160 |
reg = <0x5c700000 0x8000>; |
| 161 |
interrupts = <0 98 0x4>; |
| 162 |
interrupt-names = "macirq"; |
| 163 |
phy-mode = "rgmii"; |
| 164 |
status = "disabled"; |
| 165 |
}; |
| 166 |
|
| 167 |
pinmux: pinmux@e0700000 { |
| 168 |
compatible = "st,spear1310-pinmux"; |
| 169 |
reg = <0xe0700000 0x1000>; |
| 170 |
#gpio-range-cells = <3>; |
| 171 |
}; |
| 172 |
|
| 173 |
apb { |
| 174 |
i2c1: i2c@5cd00000 { |
| 175 |
#address-cells = <1>; |
| 176 |
#size-cells = <0>; |
| 177 |
compatible = "snps,designware-i2c"; |
| 178 |
reg = <0x5cd00000 0x1000>; |
| 179 |
interrupts = <0 87 0x4>; |
| 180 |
status = "disabled"; |
| 181 |
}; |
| 182 |
|
| 183 |
i2c2: i2c@5ce00000 { |
| 184 |
#address-cells = <1>; |
| 185 |
#size-cells = <0>; |
| 186 |
compatible = "snps,designware-i2c"; |
| 187 |
reg = <0x5ce00000 0x1000>; |
| 188 |
interrupts = <0 88 0x4>; |
| 189 |
status = "disabled"; |
| 190 |
}; |
| 191 |
|
| 192 |
i2c3: i2c@5cf00000 { |
| 193 |
#address-cells = <1>; |
| 194 |
#size-cells = <0>; |
| 195 |
compatible = "snps,designware-i2c"; |
| 196 |
reg = <0x5cf00000 0x1000>; |
| 197 |
interrupts = <0 89 0x4>; |
| 198 |
status = "disabled"; |
| 199 |
}; |
| 200 |
|
| 201 |
i2c4: i2c@5d000000 { |
| 202 |
#address-cells = <1>; |
| 203 |
#size-cells = <0>; |
| 204 |
compatible = "snps,designware-i2c"; |
| 205 |
reg = <0x5d000000 0x1000>; |
| 206 |
interrupts = <0 90 0x4>; |
| 207 |
status = "disabled"; |
| 208 |
}; |
| 209 |
|
| 210 |
i2c5: i2c@5d100000 { |
| 211 |
#address-cells = <1>; |
| 212 |
#size-cells = <0>; |
| 213 |
compatible = "snps,designware-i2c"; |
| 214 |
reg = <0x5d100000 0x1000>; |
| 215 |
interrupts = <0 91 0x4>; |
| 216 |
status = "disabled"; |
| 217 |
}; |
| 218 |
|
| 219 |
i2c6: i2c@5d200000 { |
| 220 |
#address-cells = <1>; |
| 221 |
#size-cells = <0>; |
| 222 |
compatible = "snps,designware-i2c"; |
| 223 |
reg = <0x5d200000 0x1000>; |
| 224 |
interrupts = <0 92 0x4>; |
| 225 |
status = "disabled"; |
| 226 |
}; |
| 227 |
|
| 228 |
i2c7: i2c@5d300000 { |
| 229 |
#address-cells = <1>; |
| 230 |
#size-cells = <0>; |
| 231 |
compatible = "snps,designware-i2c"; |
| 232 |
reg = <0x5d300000 0x1000>; |
| 233 |
interrupts = <0 93 0x4>; |
| 234 |
status = "disabled"; |
| 235 |
}; |
| 236 |
|
| 237 |
spi1: spi@5d400000 { |
| 238 |
compatible = "arm,pl022", "arm,primecell"; |
| 239 |
reg = <0x5d400000 0x1000>; |
| 240 |
interrupts = <0 99 0x4>; |
| 241 |
#address-cells = <1>; |
| 242 |
#size-cells = <0>; |
| 243 |
status = "disabled"; |
| 244 |
}; |
| 245 |
|
| 246 |
serial@5c800000 { |
| 247 |
compatible = "arm,pl011", "arm,primecell"; |
| 248 |
reg = <0x5c800000 0x1000>; |
| 249 |
interrupts = <0 82 0x4>; |
| 250 |
status = "disabled"; |
| 251 |
}; |
| 252 |
|
| 253 |
serial@5c900000 { |
| 254 |
compatible = "arm,pl011", "arm,primecell"; |
| 255 |
reg = <0x5c900000 0x1000>; |
| 256 |
interrupts = <0 83 0x4>; |
| 257 |
status = "disabled"; |
| 258 |
}; |
| 259 |
|
| 260 |
serial@5ca00000 { |
| 261 |
compatible = "arm,pl011", "arm,primecell"; |
| 262 |
reg = <0x5ca00000 0x1000>; |
| 263 |
interrupts = <0 84 0x4>; |
| 264 |
status = "disabled"; |
| 265 |
}; |
| 266 |
|
| 267 |
serial@5cb00000 { |
| 268 |
compatible = "arm,pl011", "arm,primecell"; |
| 269 |
reg = <0x5cb00000 0x1000>; |
| 270 |
interrupts = <0 85 0x4>; |
| 271 |
status = "disabled"; |
| 272 |
}; |
| 273 |
|
| 274 |
serial@5cc00000 { |
| 275 |
compatible = "arm,pl011", "arm,primecell"; |
| 276 |
reg = <0x5cc00000 0x1000>; |
| 277 |
interrupts = <0 86 0x4>; |
| 278 |
status = "disabled"; |
| 279 |
}; |
| 280 |
|
| 281 |
thermal@e07008c4 { |
| 282 |
st,thermal-flags = <0x7000>; |
| 283 |
}; |
| 284 |
|
| 285 |
gpiopinctrl: gpio@d8400000 { |
| 286 |
compatible = "st,spear-plgpio"; |
| 287 |
reg = <0xd8400000 0x1000>; |
| 288 |
interrupts = <0 100 0x4>; |
| 289 |
#interrupt-cells = <1>; |
| 290 |
interrupt-controller; |
| 291 |
gpio-controller; |
| 292 |
#gpio-cells = <2>; |
| 293 |
gpio-ranges = <&pinmux 0 0 246>; |
| 294 |
status = "disabled"; |
| 295 |
|
| 296 |
st-plgpio,ngpio = <246>; |
| 297 |
st-plgpio,enb-reg = <0xd0>; |
| 298 |
st-plgpio,wdata-reg = <0x90>; |
| 299 |
st-plgpio,dir-reg = <0xb0>; |
| 300 |
st-plgpio,ie-reg = <0x30>; |
| 301 |
st-plgpio,rdata-reg = <0x70>; |
| 302 |
st-plgpio,mis-reg = <0x10>; |
| 303 |
st-plgpio,eit-reg = <0x50>; |
| 304 |
}; |
| 305 |
}; |
| 306 |
}; |
| 307 |
}; |