| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* DTS file for SPEAr310 SoC |
| 4 |
* |
| 5 |
* Copyright 2012 Viresh Kumar <[email protected]> |
| 6 |
*/ |
| 7 |
|
| 8 |
/include/ "spear3xx.dtsi" |
| 9 |
|
| 10 |
/ { |
| 11 |
ahb { |
| 12 |
#address-cells = <1>; |
| 13 |
#size-cells = <1>; |
| 14 |
compatible = "simple-bus"; |
| 15 |
ranges = <0x40000000 0x40000000 0x10000000 |
| 16 |
0xb0000000 0xb0000000 0x10000000 |
| 17 |
0xd0000000 0xd0000000 0x30000000>; |
| 18 |
|
| 19 |
pinmux: pinmux@b4000000 { |
| 20 |
compatible = "st,spear310-pinmux"; |
| 21 |
reg = <0xb4000000 0x1000>; |
| 22 |
#gpio-range-cells = <3>; |
| 23 |
}; |
| 24 |
|
| 25 |
fsmc: flash@44000000 { |
| 26 |
compatible = "st,spear600-fsmc-nand"; |
| 27 |
#address-cells = <1>; |
| 28 |
#size-cells = <1>; |
| 29 |
reg = <0x44000000 0x1000 /* FSMC Register */ |
| 30 |
0x40000000 0x0010 /* NAND Base DATA */ |
| 31 |
0x40020000 0x0010 /* NAND Base ADDR */ |
| 32 |
0x40010000 0x0010>; /* NAND Base CMD */ |
| 33 |
reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd"; |
| 34 |
status = "disabled"; |
| 35 |
}; |
| 36 |
|
| 37 |
shirq: interrupt-controller@b4000000 { |
| 38 |
compatible = "st,spear310-shirq"; |
| 39 |
reg = <0xb4000000 0x1000>; |
| 40 |
interrupts = <28 29 30 1>; |
| 41 |
#interrupt-cells = <1>; |
| 42 |
interrupt-controller; |
| 43 |
}; |
| 44 |
|
| 45 |
apb { |
| 46 |
#address-cells = <1>; |
| 47 |
#size-cells = <1>; |
| 48 |
compatible = "simple-bus"; |
| 49 |
ranges = <0xb0000000 0xb0000000 0x10000000 |
| 50 |
0xd0000000 0xd0000000 0x30000000>; |
| 51 |
|
| 52 |
serial@b2000000 { |
| 53 |
compatible = "arm,pl011", "arm,primecell"; |
| 54 |
reg = <0xb2000000 0x1000>; |
| 55 |
interrupts = <8>; |
| 56 |
interrupt-parent = <&shirq>; |
| 57 |
status = "disabled"; |
| 58 |
}; |
| 59 |
|
| 60 |
serial@b2080000 { |
| 61 |
compatible = "arm,pl011", "arm,primecell"; |
| 62 |
reg = <0xb2080000 0x1000>; |
| 63 |
interrupts = <9>; |
| 64 |
interrupt-parent = <&shirq>; |
| 65 |
status = "disabled"; |
| 66 |
}; |
| 67 |
|
| 68 |
serial@b2100000 { |
| 69 |
compatible = "arm,pl011", "arm,primecell"; |
| 70 |
reg = <0xb2100000 0x1000>; |
| 71 |
interrupts = <10>; |
| 72 |
interrupt-parent = <&shirq>; |
| 73 |
status = "disabled"; |
| 74 |
}; |
| 75 |
|
| 76 |
serial@b2180000 { |
| 77 |
compatible = "arm,pl011", "arm,primecell"; |
| 78 |
reg = <0xb2180000 0x1000>; |
| 79 |
interrupts = <11>; |
| 80 |
interrupt-parent = <&shirq>; |
| 81 |
status = "disabled"; |
| 82 |
}; |
| 83 |
|
| 84 |
serial@b2200000 { |
| 85 |
compatible = "arm,pl011", "arm,primecell"; |
| 86 |
reg = <0xb2200000 0x1000>; |
| 87 |
interrupts = <12>; |
| 88 |
interrupt-parent = <&shirq>; |
| 89 |
status = "disabled"; |
| 90 |
}; |
| 91 |
|
| 92 |
gpiopinctrl: gpio@b4000000 { |
| 93 |
compatible = "st,spear-plgpio"; |
| 94 |
reg = <0xb4000000 0x1000>; |
| 95 |
regmap = <&pinmux>; |
| 96 |
#interrupt-cells = <1>; |
| 97 |
interrupt-controller; |
| 98 |
gpio-controller; |
| 99 |
#gpio-cells = <2>; |
| 100 |
gpio-ranges = <&pinmux 0 0 102>; |
| 101 |
status = "disabled"; |
| 102 |
|
| 103 |
st-plgpio,ngpio = <102>; |
| 104 |
st-plgpio,enb-reg = <0x10>; |
| 105 |
st-plgpio,wdata-reg = <0x20>; |
| 106 |
st-plgpio,dir-reg = <0x30>; |
| 107 |
st-plgpio,ie-reg = <0x50>; |
| 108 |
st-plgpio,rdata-reg = <0x40>; |
| 109 |
st-plgpio,mis-reg = <0x60>; |
| 110 |
}; |
| 111 |
}; |
| 112 |
}; |
| 113 |
}; |