| 1 |
/* |
| 2 |
* Copyright 2017 - Vikas MANOCHA <[email protected]> |
| 3 |
* |
| 4 |
* This file is dual-licensed: you can use it either under the terms |
| 5 |
* of the GPL or the X11 license, at your option. Note that this dual |
| 6 |
* licensing only applies to this file, and not this project as a |
| 7 |
* whole. |
| 8 |
* |
| 9 |
* a) This file is free software; you can redistribute it and/or |
| 10 |
* modify it under the terms of the GNU General Public License as |
| 11 |
* published by the Free Software Foundation; either version 2 of the |
| 12 |
* License, or (at your option) any later version. |
| 13 |
* |
| 14 |
* This file is distributed in the hope that it will be useful, |
| 15 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 16 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 17 |
* GNU General Public License for more details. |
| 18 |
* |
| 19 |
* Or, alternatively, |
| 20 |
* |
| 21 |
* b) Permission is hereby granted, free of charge, to any person |
| 22 |
* obtaining a copy of this software and associated documentation |
| 23 |
* files (the "Software"), to deal in the Software without |
| 24 |
* restriction, including without limitation the rights to use, |
| 25 |
* copy, modify, merge, publish, distribute, sublicense, and/or |
| 26 |
* sell copies of the Software, and to permit persons to whom the |
| 27 |
* Software is furnished to do so, subject to the following |
| 28 |
* conditions: |
| 29 |
* |
| 30 |
* The above copyright notice and this permission notice shall be |
| 31 |
* included in all copies or substantial portions of the Software. |
| 32 |
* |
| 33 |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 34 |
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| 35 |
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 36 |
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| 37 |
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| 38 |
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| 39 |
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| 40 |
* OTHER DEALINGS IN THE SOFTWARE. |
| 41 |
*/ |
| 42 |
|
| 43 |
/dts-v1/; |
| 44 |
#include "stm32f769.dtsi" |
| 45 |
#include "stm32f769-pinctrl.dtsi" |
| 46 |
#include <dt-bindings/input/input.h> |
| 47 |
#include <dt-bindings/gpio/gpio.h> |
| 48 |
#include <dt-bindings/leds/common.h> |
| 49 |
|
| 50 |
/ { |
| 51 |
model = "STMicroelectronics STM32F769-DISCO board"; |
| 52 |
compatible = "st,stm32f769-disco", "st,stm32f769"; |
| 53 |
|
| 54 |
chosen { |
| 55 |
bootargs = "root=/dev/ram"; |
| 56 |
stdout-path = "serial0:115200n8"; |
| 57 |
}; |
| 58 |
|
| 59 |
memory@c0000000 { |
| 60 |
device_type = "memory"; |
| 61 |
reg = <0xC0000000 0x1000000>; |
| 62 |
}; |
| 63 |
|
| 64 |
reserved-memory { |
| 65 |
#address-cells = <1>; |
| 66 |
#size-cells = <1>; |
| 67 |
ranges; |
| 68 |
|
| 69 |
linux,dma { |
| 70 |
compatible = "shared-dma-pool"; |
| 71 |
linux,dma-default; |
| 72 |
no-map; |
| 73 |
size = <0x100000>; |
| 74 |
}; |
| 75 |
}; |
| 76 |
|
| 77 |
aliases { |
| 78 |
serial0 = &usart1; |
| 79 |
}; |
| 80 |
|
| 81 |
leds { |
| 82 |
compatible = "gpio-leds"; |
| 83 |
led_usr2: led-usr2 { |
| 84 |
function = LED_FUNCTION_HEARTBEAT; |
| 85 |
color = <LED_COLOR_ID_GREEN>; |
| 86 |
gpios = <&gpioj 5 GPIO_ACTIVE_HIGH>; |
| 87 |
linux,default-trigger = "heartbeat"; |
| 88 |
}; |
| 89 |
led-usr1 { |
| 90 |
color = <LED_COLOR_ID_RED>; |
| 91 |
gpios = <&gpioj 13 GPIO_ACTIVE_HIGH>; |
| 92 |
}; |
| 93 |
led-usr3 { |
| 94 |
color = <LED_COLOR_ID_GREEN>; |
| 95 |
gpios = <&gpioa 12 GPIO_ACTIVE_HIGH>; |
| 96 |
}; |
| 97 |
}; |
| 98 |
|
| 99 |
gpio-keys { |
| 100 |
compatible = "gpio-keys"; |
| 101 |
autorepeat; |
| 102 |
button-0 { |
| 103 |
label = "User"; |
| 104 |
linux,code = <KEY_HOME>; |
| 105 |
gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>; |
| 106 |
}; |
| 107 |
}; |
| 108 |
|
| 109 |
options { |
| 110 |
u-boot { |
| 111 |
compatible = "u-boot,config"; |
| 112 |
boot-led = <&led_usr2>; |
| 113 |
}; |
| 114 |
}; |
| 115 |
|
| 116 |
usbotg_hs_phy: usb-phy { |
| 117 |
#phy-cells = <0>; |
| 118 |
compatible = "usb-nop-xceiv"; |
| 119 |
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHSULPI)>; |
| 120 |
clock-names = "main_clk"; |
| 121 |
}; |
| 122 |
|
| 123 |
vcc_3v3: vcc-3v3 { |
| 124 |
compatible = "regulator-fixed"; |
| 125 |
regulator-name = "vcc_3v3"; |
| 126 |
regulator-min-microvolt = <3300000>; |
| 127 |
regulator-max-microvolt = <3300000>; |
| 128 |
}; |
| 129 |
}; |
| 130 |
|
| 131 |
&rcc { |
| 132 |
compatible = "st,stm32f769-rcc", "st,stm32f746-rcc", "st,stm32-rcc"; |
| 133 |
}; |
| 134 |
|
| 135 |
&cec { |
| 136 |
pinctrl-0 = <&cec_pins_a>; |
| 137 |
pinctrl-names = "default"; |
| 138 |
status = "okay"; |
| 139 |
}; |
| 140 |
|
| 141 |
&clk_hse { |
| 142 |
clock-frequency = <25000000>; |
| 143 |
}; |
| 144 |
|
| 145 |
&dsi { |
| 146 |
#address-cells = <1>; |
| 147 |
#size-cells = <0>; |
| 148 |
status = "okay"; |
| 149 |
|
| 150 |
ports { |
| 151 |
#address-cells = <1>; |
| 152 |
#size-cells = <0>; |
| 153 |
|
| 154 |
port@0 { |
| 155 |
reg = <0>; |
| 156 |
dsi_in: endpoint { |
| 157 |
remote-endpoint = <<dc_out_dsi>; |
| 158 |
}; |
| 159 |
}; |
| 160 |
|
| 161 |
port@1 { |
| 162 |
reg = <1>; |
| 163 |
dsi_out: endpoint { |
| 164 |
remote-endpoint = <&dsi_panel_in>; |
| 165 |
}; |
| 166 |
}; |
| 167 |
}; |
| 168 |
|
| 169 |
panel0: panel@0 { |
| 170 |
compatible = "orisetech,otm8009a"; |
| 171 |
reg = <0>; /* dsi virtual channel (0..3) */ |
| 172 |
reset-gpios = <&gpioj 15 GPIO_ACTIVE_LOW>; |
| 173 |
power-supply = <&vcc_3v3>; |
| 174 |
status = "okay"; |
| 175 |
|
| 176 |
port { |
| 177 |
dsi_panel_in: endpoint { |
| 178 |
remote-endpoint = <&dsi_out>; |
| 179 |
}; |
| 180 |
}; |
| 181 |
}; |
| 182 |
}; |
| 183 |
|
| 184 |
&i2c1 { |
| 185 |
pinctrl-0 = <&i2c1_pins_b>; |
| 186 |
pinctrl-names = "default"; |
| 187 |
i2c-scl-rising-time-ns = <185>; |
| 188 |
i2c-scl-falling-time-ns = <20>; |
| 189 |
status = "okay"; |
| 190 |
}; |
| 191 |
|
| 192 |
<dc { |
| 193 |
status = "okay"; |
| 194 |
|
| 195 |
port { |
| 196 |
ltdc_out_dsi: endpoint { |
| 197 |
remote-endpoint = <&dsi_in>; |
| 198 |
}; |
| 199 |
}; |
| 200 |
}; |
| 201 |
|
| 202 |
&rtc { |
| 203 |
status = "okay"; |
| 204 |
}; |
| 205 |
|
| 206 |
&sdio2 { |
| 207 |
status = "okay"; |
| 208 |
vmmc-supply = <&vcc_3v3>; |
| 209 |
cd-gpios = <&gpioi 15 GPIO_ACTIVE_LOW>; |
| 210 |
broken-cd; |
| 211 |
pinctrl-names = "default", "opendrain", "sleep"; |
| 212 |
pinctrl-0 = <&sdio_pins_b>; |
| 213 |
pinctrl-1 = <&sdio_pins_od_b>; |
| 214 |
pinctrl-2 = <&sdio_pins_sleep_b>; |
| 215 |
bus-width = <4>; |
| 216 |
}; |
| 217 |
|
| 218 |
&timers5 { |
| 219 |
/* Override timer5 to act as clockevent */ |
| 220 |
compatible = "st,stm32-timer"; |
| 221 |
interrupts = <50>; |
| 222 |
status = "okay"; |
| 223 |
/delete-property/#address-cells; |
| 224 |
/delete-property/#size-cells; |
| 225 |
/delete-property/clock-names; |
| 226 |
/delete-node/pwm; |
| 227 |
/delete-node/timer@4; |
| 228 |
}; |
| 229 |
|
| 230 |
&usart1 { |
| 231 |
pinctrl-0 = <&usart1_pins_a>; |
| 232 |
pinctrl-names = "default"; |
| 233 |
status = "okay"; |
| 234 |
}; |
| 235 |
|
| 236 |
&usbotg_hs { |
| 237 |
dr_mode = "otg"; |
| 238 |
phys = <&usbotg_hs_phy>; |
| 239 |
phy-names = "usb2-phy"; |
| 240 |
pinctrl-0 = <&usbotg_hs_pins_a>; |
| 241 |
pinctrl-names = "default"; |
| 242 |
status = "okay"; |
| 243 |
}; |