Debian Codegraph @

arch/arm/boot/dts/st/stm32h743i-eval.dts

raw
1 /*
2 * Copyright 2017 - Alexandre Torgue <[email protected]>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
28 * conditions:
29 *
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
32 *
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43 /dts-v1/;
44 #include "stm32h743.dtsi"
45 #include "stm32h7-pinctrl.dtsi"
46 #include <dt-bindings/gpio/gpio.h>
47 #include <dt-bindings/leds/common.h>
48
49 / {
50 model = "STMicroelectronics STM32H743i-EVAL board";
51 compatible = "st,stm32h743i-eval", "st,stm32h743";
52
53 chosen {
54 bootargs = "root=/dev/ram";
55 stdout-path = "serial0:115200n8";
56 };
57
58 memory@d0000000 {
59 device_type = "memory";
60 reg = <0xd0000000 0x2000000>;
61 };
62
63 aliases {
64 serial0 = &usart1;
65 };
66
67 led {
68 compatible = "gpio-leds";
69 led_green: led-green {
70 function = LED_FUNCTION_HEARTBEAT;
71 color = <LED_COLOR_ID_GREEN>;
72 gpios = <&gpiof 10 GPIO_ACTIVE_LOW>;
73 linux,default-trigger = "heartbeat";
74 default-state = "off";
75 };
76
77 led-red {
78 color = <LED_COLOR_ID_RED>;
79 gpios = <&gpioa 4 GPIO_ACTIVE_LOW>;
80 };
81 };
82
83 options {
84 u-boot {
85 compatible = "u-boot,config";
86 boot-led = <&led_green>;
87 };
88 };
89
90 vdda: regulator-vdda {
91 compatible = "regulator-fixed";
92 regulator-name = "vdda";
93 regulator-min-microvolt = <3300000>;
94 regulator-max-microvolt = <3300000>;
95 regulator-always-on;
96 };
97
98 v2v9_sd: regulator-v2v9_sd {
99 compatible = "regulator-fixed";
100 regulator-name = "v2v9_sd";
101 regulator-min-microvolt = <2900000>;
102 regulator-max-microvolt = <2900000>;
103 regulator-always-on;
104 };
105
106 usbotg_hs_phy: usb-phy {
107 #phy-cells = <0>;
108 compatible = "usb-nop-xceiv";
109 clocks = <&rcc USB1ULPI_CK>;
110 clock-names = "main_clk";
111 };
112 };
113
114 &adc_12 {
115 vdda-supply = <&vdda>;
116 vref-supply = <&vdda>;
117 status = "okay";
118 adc1: adc@0 {
119 /* potentiometer */
120 st,adc-channels = <0>;
121 status = "okay";
122 };
123 };
124
125 &clk_hse {
126 clock-frequency = <25000000>;
127 };
128
129 &i2c1 {
130 pinctrl-0 = <&i2c1_pins_a>;
131 pinctrl-names = "default";
132 i2c-scl-rising-time-ns = <185>;
133 i2c-scl-falling-time-ns = <20>;
134 status = "okay";
135 };
136
137 &rtc {
138 status = "okay";
139 };
140
141 &mac {
142 status = "disabled";
143 pinctrl-0 = <&ethernet_rmii>;
144 pinctrl-names = "default";
145 phy-mode = "rmii";
146 phy-handle = <&phy0>;
147
148 mdio0 {
149 #address-cells = <1>;
150 #size-cells = <0>;
151 compatible = "snps,dwmac-mdio";
152 phy0: ethernet-phy@0 {
153 reg = <0>;
154 };
155 };
156 };
157
158 &sdmmc1 {
159 pinctrl-names = "default", "opendrain", "sleep";
160 pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
161 pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>;
162 pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>;
163 broken-cd;
164 st,sig-dir;
165 st,neg-edge;
166 st,use-ckin;
167 bus-width = <4>;
168 vmmc-supply = <&v2v9_sd>;
169 status = "okay";
170 };
171
172 &usart1 {
173 pinctrl-0 = <&usart1_pins_a>;
174 pinctrl-names = "default";
175 status = "okay";
176 };
177
178 &usbotg_hs {
179 pinctrl-0 = <&usbotg_hs_pins_a>;
180 pinctrl-names = "default";
181 phys = <&usbotg_hs_phy>;
182 phy-names = "usb2-phy";
183 dr_mode = "otg";
184 status = "okay";
185 };