| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* Copyright 2012 ST-Ericsson AB |
| 4 |
*/ |
| 5 |
|
| 6 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 7 |
|
| 8 |
/ { |
| 9 |
gpio_keys { |
| 10 |
compatible = "gpio-keys"; |
| 11 |
#address-cells = <1>; |
| 12 |
#size-cells = <0>; |
| 13 |
vdd-supply = <&ab8500_ldo_aux1_reg>; |
| 14 |
pinctrl-names = "default"; |
| 15 |
pinctrl-0 = <&prox_stuib_mode>, <&hall_stuib_mode>; |
| 16 |
|
| 17 |
button@139 { |
| 18 |
/* Proximity sensor */ |
| 19 |
gpios = <&gpio6 25 GPIO_ACTIVE_HIGH>; |
| 20 |
linux,code = <11>; /* SW_FRONT_PROXIMITY */ |
| 21 |
label = "SFH7741 Proximity Sensor"; |
| 22 |
}; |
| 23 |
button@145 { |
| 24 |
/* Hall sensor */ |
| 25 |
gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>; |
| 26 |
linux,code = <0>; /* SW_LID */ |
| 27 |
label = "HED54XXU11 Hall Effect Sensor"; |
| 28 |
}; |
| 29 |
}; |
| 30 |
|
| 31 |
soc { |
| 32 |
i2c@80004000 { |
| 33 |
stmpe1601: port-expander@40 { |
| 34 |
compatible = "st,stmpe1601"; |
| 35 |
reg = <0x40>; |
| 36 |
interrupts = <26 IRQ_TYPE_EDGE_FALLING>; |
| 37 |
interrupt-parent = <&gpio6>; |
| 38 |
vcc-supply = <&db8500_vsmps2_reg>; |
| 39 |
vio-supply = <&db8500_vsmps2_reg>; |
| 40 |
pinctrl-names = "default"; |
| 41 |
pinctrl-0 = <&stmpe_stuib_mode>; |
| 42 |
|
| 43 |
wakeup-source; |
| 44 |
st,autosleep-timeout = <1024>; |
| 45 |
|
| 46 |
keyboard-controller { |
| 47 |
compatible = "st,stmpe-keypad"; |
| 48 |
|
| 49 |
debounce-interval = <64>; |
| 50 |
st,scan-count = <8>; |
| 51 |
st,no-autorepeat; |
| 52 |
|
| 53 |
linux,keymap = <0x205006b |
| 54 |
0x4010074 |
| 55 |
0x3050072 |
| 56 |
0x1030004 |
| 57 |
0x502006a |
| 58 |
0x500000a |
| 59 |
0x5008b |
| 60 |
0x706001c |
| 61 |
0x405000b |
| 62 |
0x6070003 |
| 63 |
0x3040067 |
| 64 |
0x303006c |
| 65 |
0x60400e7 |
| 66 |
0x602009e |
| 67 |
0x4020073 |
| 68 |
0x5050002 |
| 69 |
0x4030069 |
| 70 |
0x3020008>; |
| 71 |
}; |
| 72 |
}; |
| 73 |
}; |
| 74 |
|
| 75 |
/* Sensors mounted on this board variant */ |
| 76 |
i2c@80128000 { |
| 77 |
lis331dl@1c { |
| 78 |
/* Accelerometer */ |
| 79 |
compatible = "st,lis331dl-accel"; |
| 80 |
st,drdy-int-pin = <1>; |
| 81 |
reg = <0x1c>; |
| 82 |
vdd-supply = <&ab8500_ldo_aux1_reg>; |
| 83 |
vddio-supply = <&db8500_vsmps2_reg>; |
| 84 |
pinctrl-names = "default"; |
| 85 |
pinctrl-0 = <&accel_stuib_mode>; |
| 86 |
interrupt-parent = <&gpio2>; |
| 87 |
interrupts = <18 IRQ_TYPE_EDGE_RISING>, |
| 88 |
<19 IRQ_TYPE_EDGE_RISING>; |
| 89 |
}; |
| 90 |
ak8974@f { |
| 91 |
/* Magnetometer */ |
| 92 |
compatible = "asahi-kasei,ak8974"; |
| 93 |
reg = <0x0f>; |
| 94 |
vdd-supply = <&ab8500_ldo_aux1_reg>; |
| 95 |
vddio-supply = <&db8500_vsmps2_reg>; |
| 96 |
pinctrl-names = "default"; |
| 97 |
pinctrl-0 = <&magneto_stuib_mode>; |
| 98 |
interrupt-parent = <&gpio1>; |
| 99 |
interrupts = <0 IRQ_TYPE_EDGE_RISING>; |
| 100 |
}; |
| 101 |
}; |
| 102 |
|
| 103 |
i2c@80110000 { |
| 104 |
bu21013_tp@5c { |
| 105 |
compatible = "rohm,bu21013_tp"; |
| 106 |
reg = <0x5c>; |
| 107 |
avdd-supply = <&ab8500_ldo_aux1_reg>; |
| 108 |
|
| 109 |
rohm,touch-max-x = <384>; |
| 110 |
rohm,touch-max-y = <704>; |
| 111 |
rohm,flip-y; |
| 112 |
pinctrl-names = "default"; |
| 113 |
pinctrl-0 = <&touch_rohm_mode>; |
| 114 |
}; |
| 115 |
|
| 116 |
bu21013_tp@5d { |
| 117 |
compatible = "rohm,bu21013_tp"; |
| 118 |
reg = <0x5d>; |
| 119 |
avdd-supply = <&ab8500_ldo_aux1_reg>; |
| 120 |
|
| 121 |
rohm,touch-max-x = <384>; |
| 122 |
rohm,touch-max-y = <704>; |
| 123 |
rohm,flip-y; |
| 124 |
pinctrl-names = "default"; |
| 125 |
pinctrl-0 = <&touch_rohm_mode>; |
| 126 |
}; |
| 127 |
}; |
| 128 |
|
| 129 |
pinctrl { |
| 130 |
/* Pull up this GPIO pin */ |
| 131 |
stmpe { |
| 132 |
stmpe_stuib_mode: stmpe_stuib { |
| 133 |
stuib_cfg { |
| 134 |
ste,pins = "GPIO218_AH11"; |
| 135 |
ste,config = <&gpio_in_pu>; |
| 136 |
}; |
| 137 |
}; |
| 138 |
}; |
| 139 |
prox { |
| 140 |
prox_stuib_mode: prox_stuib { |
| 141 |
stuib_cfg { |
| 142 |
pins = "GPIO217_AH12"; |
| 143 |
ste,config = <&gpio_in_pu>; |
| 144 |
}; |
| 145 |
}; |
| 146 |
}; |
| 147 |
hall { |
| 148 |
hall_stuib_mode: stuib_tvk { |
| 149 |
stuib_cfg { |
| 150 |
pins = "GPIO145_C13"; |
| 151 |
ste,config = <&gpio_in_pu>; |
| 152 |
}; |
| 153 |
}; |
| 154 |
}; |
| 155 |
accelerometer { |
| 156 |
accel_stuib_mode: accel_stuib { |
| 157 |
/* Accelerometer interrupt lines 1 & 2 */ |
| 158 |
stuib_cfg { |
| 159 |
pins = "GPIO82_C1", "GPIO83_D3"; |
| 160 |
ste,config = <&gpio_in_pu>; |
| 161 |
}; |
| 162 |
}; |
| 163 |
}; |
| 164 |
magnetometer { |
| 165 |
magneto_stuib_mode: magneto_stuib { |
| 166 |
/* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */ |
| 167 |
stuib_cfg1 { |
| 168 |
pins = "GPIO31_V3"; |
| 169 |
ste,config = <&gpio_in_pu>; |
| 170 |
}; |
| 171 |
stuib_cfg2 { |
| 172 |
pins = "GPIO32_V2"; |
| 173 |
ste,config = <&gpio_in_pd>; |
| 174 |
}; |
| 175 |
}; |
| 176 |
}; |
| 177 |
touch { |
| 178 |
touch_rohm_mode: touch_rohm { |
| 179 |
/* |
| 180 |
* ROHM touch screen uses GPIO 143 for |
| 181 |
* RST1, GPIO 146 for RST2 and |
| 182 |
* GPIO 67 for interrupts. Pull-up |
| 183 |
* the IRQ line and drive both |
| 184 |
* reset signals low. |
| 185 |
*/ |
| 186 |
stuib_cfg1 { |
| 187 |
pins = "GPIO143_D12", "GPIO146_D13"; |
| 188 |
ste,config = <&gpio_out_lo>; |
| 189 |
}; |
| 190 |
stuib_cfg2 { |
| 191 |
pins = "GPIO67_G2"; |
| 192 |
ste,config = <&gpio_in_pu>; |
| 193 |
}; |
| 194 |
}; |
| 195 |
}; |
| 196 |
}; |
| 197 |
|
| 198 |
mcde@a0350000 { |
| 199 |
status = "okay"; |
| 200 |
|
| 201 |
dsi@a0351000 { |
| 202 |
panel { |
| 203 |
compatible = "samsung,s6d16d0"; |
| 204 |
reg = <0>; |
| 205 |
vdd1-supply = <&ab8500_ldo_aux1_reg>; |
| 206 |
reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; |
| 207 |
}; |
| 208 |
}; |
| 209 |
}; |
| 210 |
}; |
| 211 |
}; |