| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) |
| 2 |
/* |
| 3 |
* Copyright (C) STMicroelectronics 2017 - All Rights Reserved |
| 4 |
* Author: Ludovic Barre <[email protected]> for STMicroelectronics. |
| 5 |
*/ |
| 6 |
/dts-v1/; |
| 7 |
|
| 8 |
#include "stm32mp157.dtsi" |
| 9 |
#include "stm32mp15xc.dtsi" |
| 10 |
#include "stm32mp15-pinctrl.dtsi" |
| 11 |
#include "stm32mp15xxaa-pinctrl.dtsi" |
| 12 |
#include <dt-bindings/gpio/gpio.h> |
| 13 |
#include <dt-bindings/leds/common.h> |
| 14 |
#include <dt-bindings/mfd/st,stpmic1.h> |
| 15 |
|
| 16 |
/ { |
| 17 |
model = "STMicroelectronics STM32MP157C eval daughter"; |
| 18 |
compatible = "st,stm32mp157c-ed1", "st,stm32mp157"; |
| 19 |
|
| 20 |
aliases { |
| 21 |
serial0 = &uart4; |
| 22 |
}; |
| 23 |
|
| 24 |
chosen { |
| 25 |
stdout-path = "serial0:115200n8"; |
| 26 |
}; |
| 27 |
|
| 28 |
memory@c0000000 { |
| 29 |
device_type = "memory"; |
| 30 |
reg = <0xC0000000 0x40000000>; |
| 31 |
}; |
| 32 |
|
| 33 |
reserved-memory { |
| 34 |
#address-cells = <1>; |
| 35 |
#size-cells = <1>; |
| 36 |
ranges; |
| 37 |
|
| 38 |
mcuram2: mcuram2@10000000 { |
| 39 |
compatible = "shared-dma-pool"; |
| 40 |
reg = <0x10000000 0x40000>; |
| 41 |
no-map; |
| 42 |
}; |
| 43 |
|
| 44 |
vdev0vring0: vdev0vring0@10040000 { |
| 45 |
compatible = "shared-dma-pool"; |
| 46 |
reg = <0x10040000 0x1000>; |
| 47 |
no-map; |
| 48 |
}; |
| 49 |
|
| 50 |
vdev0vring1: vdev0vring1@10041000 { |
| 51 |
compatible = "shared-dma-pool"; |
| 52 |
reg = <0x10041000 0x1000>; |
| 53 |
no-map; |
| 54 |
}; |
| 55 |
|
| 56 |
vdev0buffer: vdev0buffer@10042000 { |
| 57 |
compatible = "shared-dma-pool"; |
| 58 |
reg = <0x10042000 0x4000>; |
| 59 |
no-map; |
| 60 |
}; |
| 61 |
|
| 62 |
mcuram: mcuram@30000000 { |
| 63 |
compatible = "shared-dma-pool"; |
| 64 |
reg = <0x30000000 0x40000>; |
| 65 |
no-map; |
| 66 |
}; |
| 67 |
|
| 68 |
retram: retram@38000000 { |
| 69 |
compatible = "shared-dma-pool"; |
| 70 |
reg = <0x38000000 0x10000>; |
| 71 |
no-map; |
| 72 |
}; |
| 73 |
}; |
| 74 |
|
| 75 |
led { |
| 76 |
compatible = "gpio-leds"; |
| 77 |
led_blue: led-blue { |
| 78 |
gpios = <&gpiod 9 GPIO_ACTIVE_HIGH>; |
| 79 |
linux,default-trigger = "heartbeat"; |
| 80 |
default-state = "off"; |
| 81 |
function = LED_FUNCTION_HEARTBEAT; |
| 82 |
color = <LED_COLOR_ID_BLUE>; |
| 83 |
}; |
| 84 |
|
| 85 |
led-red { |
| 86 |
function = LED_FUNCTION_STATUS; |
| 87 |
color = <LED_COLOR_ID_RED>; |
| 88 |
gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; |
| 89 |
}; |
| 90 |
}; |
| 91 |
|
| 92 |
options { |
| 93 |
u-boot { |
| 94 |
compatible = "u-boot,config"; |
| 95 |
boot-led = <&led_blue>; |
| 96 |
}; |
| 97 |
}; |
| 98 |
|
| 99 |
sd_switch: regulator-sd_switch { |
| 100 |
compatible = "regulator-gpio"; |
| 101 |
regulator-name = "sd_switch"; |
| 102 |
regulator-min-microvolt = <1800000>; |
| 103 |
regulator-max-microvolt = <2900000>; |
| 104 |
regulator-type = "voltage"; |
| 105 |
regulator-always-on; |
| 106 |
|
| 107 |
gpios = <&gpiof 14 GPIO_ACTIVE_HIGH>; |
| 108 |
gpios-states = <0>; |
| 109 |
states = <1800000 0x1>, |
| 110 |
<2900000 0x0>; |
| 111 |
}; |
| 112 |
|
| 113 |
vin: vin { |
| 114 |
compatible = "regulator-fixed"; |
| 115 |
regulator-name = "vin"; |
| 116 |
regulator-min-microvolt = <5000000>; |
| 117 |
regulator-max-microvolt = <5000000>; |
| 118 |
regulator-always-on; |
| 119 |
}; |
| 120 |
}; |
| 121 |
|
| 122 |
&adc { |
| 123 |
/* ANA0, ANA1 are dedicated pins and don't need pinctrl: only in6. */ |
| 124 |
pinctrl-0 = <&adc1_in6_pins_a>; |
| 125 |
pinctrl-names = "default"; |
| 126 |
vdd-supply = <&vdd>; |
| 127 |
vdda-supply = <&vdda>; |
| 128 |
vref-supply = <&vdda>; |
| 129 |
status = "disabled"; |
| 130 |
adc1: adc@0 { |
| 131 |
status = "okay"; |
| 132 |
channel@0 { |
| 133 |
reg = <0>; |
| 134 |
/* 16.5 ck_cycles sampling time */ |
| 135 |
st,min-sample-time-ns = <400>; |
| 136 |
}; |
| 137 |
channel@1 { |
| 138 |
reg = <1>; |
| 139 |
st,min-sample-time-ns = <400>; |
| 140 |
}; |
| 141 |
channel@6 { |
| 142 |
reg = <6>; |
| 143 |
st,min-sample-time-ns = <400>; |
| 144 |
}; |
| 145 |
}; |
| 146 |
}; |
| 147 |
|
| 148 |
&crc1 { |
| 149 |
status = "okay"; |
| 150 |
}; |
| 151 |
|
| 152 |
&cryp1 { |
| 153 |
status = "okay"; |
| 154 |
}; |
| 155 |
|
| 156 |
&dac { |
| 157 |
pinctrl-names = "default"; |
| 158 |
pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>; |
| 159 |
vref-supply = <&vdda>; |
| 160 |
status = "disabled"; |
| 161 |
dac1: dac@1 { |
| 162 |
status = "okay"; |
| 163 |
}; |
| 164 |
dac2: dac@2 { |
| 165 |
status = "okay"; |
| 166 |
}; |
| 167 |
}; |
| 168 |
|
| 169 |
&dts { |
| 170 |
status = "okay"; |
| 171 |
}; |
| 172 |
|
| 173 |
&hash1 { |
| 174 |
status = "okay"; |
| 175 |
}; |
| 176 |
|
| 177 |
&i2c4 { |
| 178 |
pinctrl-names = "default", "sleep"; |
| 179 |
pinctrl-0 = <&i2c4_pins_a>; |
| 180 |
pinctrl-1 = <&i2c4_sleep_pins_a>; |
| 181 |
i2c-scl-rising-time-ns = <185>; |
| 182 |
i2c-scl-falling-time-ns = <20>; |
| 183 |
clock-frequency = <400000>; |
| 184 |
status = "okay"; |
| 185 |
/* spare dmas for other usage */ |
| 186 |
/delete-property/dmas; |
| 187 |
/delete-property/dma-names; |
| 188 |
|
| 189 |
pmic: stpmic@33 { |
| 190 |
compatible = "st,stpmic1"; |
| 191 |
reg = <0x33>; |
| 192 |
interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; |
| 193 |
interrupt-controller; |
| 194 |
#interrupt-cells = <2>; |
| 195 |
status = "okay"; |
| 196 |
|
| 197 |
regulators { |
| 198 |
compatible = "st,stpmic1-regulators"; |
| 199 |
buck1-supply = <&vin>; |
| 200 |
buck2-supply = <&vin>; |
| 201 |
buck3-supply = <&vin>; |
| 202 |
buck4-supply = <&vin>; |
| 203 |
ldo1-supply = <&v3v3>; |
| 204 |
ldo2-supply = <&v3v3>; |
| 205 |
ldo3-supply = <&vdd_ddr>; |
| 206 |
ldo4-supply = <&vin>; |
| 207 |
ldo5-supply = <&v3v3>; |
| 208 |
ldo6-supply = <&v3v3>; |
| 209 |
vref_ddr-supply = <&vin>; |
| 210 |
boost-supply = <&vin>; |
| 211 |
pwr_sw1-supply = <&bst_out>; |
| 212 |
pwr_sw2-supply = <&bst_out>; |
| 213 |
|
| 214 |
vddcore: buck1 { |
| 215 |
regulator-name = "vddcore"; |
| 216 |
regulator-min-microvolt = <1200000>; |
| 217 |
regulator-max-microvolt = <1350000>; |
| 218 |
regulator-always-on; |
| 219 |
regulator-initial-mode = <0>; |
| 220 |
regulator-over-current-protection; |
| 221 |
}; |
| 222 |
|
| 223 |
vdd_ddr: buck2 { |
| 224 |
regulator-name = "vdd_ddr"; |
| 225 |
regulator-min-microvolt = <1350000>; |
| 226 |
regulator-max-microvolt = <1350000>; |
| 227 |
regulator-always-on; |
| 228 |
regulator-initial-mode = <0>; |
| 229 |
regulator-over-current-protection; |
| 230 |
}; |
| 231 |
|
| 232 |
vdd: buck3 { |
| 233 |
regulator-name = "vdd"; |
| 234 |
regulator-min-microvolt = <3300000>; |
| 235 |
regulator-max-microvolt = <3300000>; |
| 236 |
regulator-always-on; |
| 237 |
st,mask-reset; |
| 238 |
regulator-initial-mode = <0>; |
| 239 |
regulator-over-current-protection; |
| 240 |
}; |
| 241 |
|
| 242 |
v3v3: buck4 { |
| 243 |
regulator-name = "v3v3"; |
| 244 |
regulator-min-microvolt = <3300000>; |
| 245 |
regulator-max-microvolt = <3300000>; |
| 246 |
regulator-always-on; |
| 247 |
regulator-over-current-protection; |
| 248 |
regulator-initial-mode = <0>; |
| 249 |
}; |
| 250 |
|
| 251 |
vdda: ldo1 { |
| 252 |
regulator-name = "vdda"; |
| 253 |
regulator-min-microvolt = <2900000>; |
| 254 |
regulator-max-microvolt = <2900000>; |
| 255 |
interrupts = <IT_CURLIM_LDO1 0>; |
| 256 |
}; |
| 257 |
|
| 258 |
v2v8: ldo2 { |
| 259 |
regulator-name = "v2v8"; |
| 260 |
regulator-min-microvolt = <2800000>; |
| 261 |
regulator-max-microvolt = <2800000>; |
| 262 |
interrupts = <IT_CURLIM_LDO2 0>; |
| 263 |
}; |
| 264 |
|
| 265 |
vtt_ddr: ldo3 { |
| 266 |
regulator-name = "vtt_ddr"; |
| 267 |
regulator-min-microvolt = <500000>; |
| 268 |
regulator-max-microvolt = <750000>; |
| 269 |
regulator-always-on; |
| 270 |
regulator-over-current-protection; |
| 271 |
}; |
| 272 |
|
| 273 |
vdd_usb: ldo4 { |
| 274 |
regulator-name = "vdd_usb"; |
| 275 |
interrupts = <IT_CURLIM_LDO4 0>; |
| 276 |
}; |
| 277 |
|
| 278 |
vdd_sd: ldo5 { |
| 279 |
regulator-name = "vdd_sd"; |
| 280 |
regulator-min-microvolt = <2900000>; |
| 281 |
regulator-max-microvolt = <2900000>; |
| 282 |
interrupts = <IT_CURLIM_LDO5 0>; |
| 283 |
regulator-boot-on; |
| 284 |
}; |
| 285 |
|
| 286 |
v1v8: ldo6 { |
| 287 |
regulator-name = "v1v8"; |
| 288 |
regulator-min-microvolt = <1800000>; |
| 289 |
regulator-max-microvolt = <1800000>; |
| 290 |
interrupts = <IT_CURLIM_LDO6 0>; |
| 291 |
}; |
| 292 |
|
| 293 |
vref_ddr: vref_ddr { |
| 294 |
regulator-name = "vref_ddr"; |
| 295 |
regulator-always-on; |
| 296 |
}; |
| 297 |
|
| 298 |
bst_out: boost { |
| 299 |
regulator-name = "bst_out"; |
| 300 |
interrupts = <IT_OCP_BOOST 0>; |
| 301 |
}; |
| 302 |
|
| 303 |
vbus_otg: pwr_sw1 { |
| 304 |
regulator-name = "vbus_otg"; |
| 305 |
interrupts = <IT_OCP_OTG 0>; |
| 306 |
}; |
| 307 |
|
| 308 |
vbus_sw: pwr_sw2 { |
| 309 |
regulator-name = "vbus_sw"; |
| 310 |
interrupts = <IT_OCP_SWOUT 0>; |
| 311 |
regulator-active-discharge = <1>; |
| 312 |
}; |
| 313 |
}; |
| 314 |
|
| 315 |
onkey { |
| 316 |
compatible = "st,stpmic1-onkey"; |
| 317 |
interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>; |
| 318 |
interrupt-names = "onkey-falling", "onkey-rising"; |
| 319 |
power-off-time-sec = <10>; |
| 320 |
status = "okay"; |
| 321 |
}; |
| 322 |
|
| 323 |
watchdog { |
| 324 |
compatible = "st,stpmic1-wdt"; |
| 325 |
status = "disabled"; |
| 326 |
}; |
| 327 |
}; |
| 328 |
}; |
| 329 |
|
| 330 |
&ipcc { |
| 331 |
status = "okay"; |
| 332 |
}; |
| 333 |
|
| 334 |
&iwdg2 { |
| 335 |
timeout-sec = <32>; |
| 336 |
status = "okay"; |
| 337 |
}; |
| 338 |
|
| 339 |
&m4_rproc { |
| 340 |
memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, |
| 341 |
<&vdev0vring1>, <&vdev0buffer>; |
| 342 |
mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>; |
| 343 |
mbox-names = "vq0", "vq1", "shutdown", "detach"; |
| 344 |
pinctrl-names = "default"; |
| 345 |
pinctrl-0 = <&m4_leds_orange_pins_b>; |
| 346 |
interrupt-parent = <&exti>; |
| 347 |
interrupts = <68 1>; |
| 348 |
status = "okay"; |
| 349 |
}; |
| 350 |
|
| 351 |
&pwr_regulators { |
| 352 |
vdd-supply = <&vdd>; |
| 353 |
vdd_3v3_usbfs-supply = <&vdd_usb>; |
| 354 |
}; |
| 355 |
|
| 356 |
&rng1 { |
| 357 |
status = "okay"; |
| 358 |
}; |
| 359 |
|
| 360 |
&rtc { |
| 361 |
status = "okay"; |
| 362 |
}; |
| 363 |
|
| 364 |
&sdmmc1 { |
| 365 |
pinctrl-names = "default", "opendrain", "sleep"; |
| 366 |
pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; |
| 367 |
pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>; |
| 368 |
pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>; |
| 369 |
cd-gpios = <&gpiog 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; |
| 370 |
disable-wp; |
| 371 |
st,sig-dir; |
| 372 |
st,neg-edge; |
| 373 |
st,use-ckin; |
| 374 |
bus-width = <4>; |
| 375 |
vmmc-supply = <&vdd_sd>; |
| 376 |
vqmmc-supply = <&sd_switch>; |
| 377 |
sd-uhs-sdr12; |
| 378 |
sd-uhs-sdr25; |
| 379 |
sd-uhs-sdr50; |
| 380 |
sd-uhs-ddr50; |
| 381 |
status = "okay"; |
| 382 |
}; |
| 383 |
|
| 384 |
&sdmmc2 { |
| 385 |
pinctrl-names = "default", "opendrain", "sleep"; |
| 386 |
pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>; |
| 387 |
pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>; |
| 388 |
pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>; |
| 389 |
non-removable; |
| 390 |
no-sd; |
| 391 |
no-sdio; |
| 392 |
st,neg-edge; |
| 393 |
bus-width = <8>; |
| 394 |
vmmc-supply = <&v3v3>; |
| 395 |
vqmmc-supply = <&vdd>; |
| 396 |
mmc-ddr-3_3v; |
| 397 |
status = "okay"; |
| 398 |
}; |
| 399 |
|
| 400 |
&timers6 { |
| 401 |
status = "okay"; |
| 402 |
/* spare dmas for other usage */ |
| 403 |
/delete-property/dmas; |
| 404 |
/delete-property/dma-names; |
| 405 |
timer@5 { |
| 406 |
status = "okay"; |
| 407 |
}; |
| 408 |
}; |
| 409 |
|
| 410 |
&uart4 { |
| 411 |
pinctrl-names = "default", "sleep", "idle"; |
| 412 |
pinctrl-0 = <&uart4_pins_a>; |
| 413 |
pinctrl-1 = <&uart4_sleep_pins_a>; |
| 414 |
pinctrl-2 = <&uart4_idle_pins_a>; |
| 415 |
/delete-property/dmas; |
| 416 |
/delete-property/dma-names; |
| 417 |
status = "okay"; |
| 418 |
}; |
| 419 |
|
| 420 |
&usbotg_hs { |
| 421 |
vbus-supply = <&vbus_otg>; |
| 422 |
}; |
| 423 |
|
| 424 |
&usbphyc_port0 { |
| 425 |
phy-supply = <&vdd_usb>; |
| 426 |
}; |
| 427 |
|
| 428 |
&usbphyc_port1 { |
| 429 |
phy-supply = <&vdd_usb>; |
| 430 |
}; |