| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* Copyright 2014 Linaro Ltd. |
| 4 |
*/ |
| 5 |
|
| 6 |
#include "ste-ab8500.dtsi" |
| 7 |
|
| 8 |
/ { |
| 9 |
soc { |
| 10 |
prcmu@80157000 { |
| 11 |
ab8500 { |
| 12 |
phy { |
| 13 |
pinctrl-names = "default", "sleep"; |
| 14 |
pinctrl-0 = <&usb_a_1_default>; |
| 15 |
pinctrl-1 = <&usb_a_1_sleep>; |
| 16 |
}; |
| 17 |
|
| 18 |
regulator { |
| 19 |
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { |
| 20 |
regulator-name = "V-DISPLAY"; |
| 21 |
}; |
| 22 |
|
| 23 |
ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { |
| 24 |
regulator-name = "V-eMMC1"; |
| 25 |
}; |
| 26 |
|
| 27 |
ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { |
| 28 |
regulator-name = "V-MMC-SD"; |
| 29 |
}; |
| 30 |
|
| 31 |
ab8500_ldo_intcore_reg: ab8500_ldo_intcore { |
| 32 |
regulator-name = "V-INTCORE"; |
| 33 |
}; |
| 34 |
|
| 35 |
ab8500_ldo_tvout_reg: ab8500_ldo_tvout { |
| 36 |
regulator-name = "V-TVOUT"; |
| 37 |
}; |
| 38 |
|
| 39 |
ab8500_ldo_audio_reg: ab8500_ldo_audio { |
| 40 |
regulator-name = "V-AUD"; |
| 41 |
}; |
| 42 |
|
| 43 |
ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { |
| 44 |
regulator-name = "V-AMIC1"; |
| 45 |
}; |
| 46 |
|
| 47 |
ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 { |
| 48 |
regulator-name = "V-AMIC2"; |
| 49 |
}; |
| 50 |
|
| 51 |
ab8500_ldo_dmic_reg: ab8500_ldo_dmic { |
| 52 |
regulator-name = "V-DMIC"; |
| 53 |
}; |
| 54 |
|
| 55 |
ab8500_ldo_ana_reg: ab8500_ldo_ana { |
| 56 |
regulator-name = "V-CSI/DSI"; |
| 57 |
}; |
| 58 |
}; |
| 59 |
|
| 60 |
gpio { |
| 61 |
/* Hog a few default settings */ |
| 62 |
pinctrl-names = "default"; |
| 63 |
pinctrl-0 = <&gpio2_default_mode>, |
| 64 |
<&gpio4_default_mode>, |
| 65 |
<&gpio10_default_mode>, |
| 66 |
<&gpio11_default_mode>, |
| 67 |
<&gpio12_default_mode>, |
| 68 |
<&gpio13_default_mode>, |
| 69 |
<&gpio16_default_mode>, |
| 70 |
<&gpio24_default_mode>, |
| 71 |
<&gpio25_default_mode>, |
| 72 |
<&gpio36_default_mode>, |
| 73 |
<&gpio37_default_mode>, |
| 74 |
<&gpio38_default_mode>, |
| 75 |
<&gpio39_default_mode>, |
| 76 |
<&gpio42_default_mode>, |
| 77 |
<&gpio26_default_mode>, |
| 78 |
<&gpio35_default_mode>, |
| 79 |
<&ycbcr_default_mode>, |
| 80 |
<&pwm_default_mode>, |
| 81 |
<&adi1_default_mode>, |
| 82 |
<&usbuicc_default_mode>, |
| 83 |
<&dmic_default_mode>, |
| 84 |
<&extcpena_default_mode>, |
| 85 |
<&modsclsda_default_mode>; |
| 86 |
|
| 87 |
/* |
| 88 |
* Pins 2, 4, 10, 11, 12, 13, 16, 24, 25, 36, 37, 38, 39 and 42 |
| 89 |
* are muxed in as GPIO, and configured as INPUT PULL DOWN |
| 90 |
*/ |
| 91 |
gpio2 { |
| 92 |
gpio2_default_mode: gpio2_default { |
| 93 |
default_mux { |
| 94 |
function = "gpio"; |
| 95 |
groups = "gpio2_a_1"; |
| 96 |
}; |
| 97 |
default_cfg { |
| 98 |
pins = "GPIO2_T9"; |
| 99 |
input-enable; |
| 100 |
bias-pull-down; |
| 101 |
}; |
| 102 |
}; |
| 103 |
}; |
| 104 |
gpio4 { |
| 105 |
gpio4_default_mode: gpio4_default { |
| 106 |
default_mux { |
| 107 |
function = "gpio"; |
| 108 |
groups = "gpio4_a_1"; |
| 109 |
}; |
| 110 |
default_cfg { |
| 111 |
pins = "GPIO4_W2"; |
| 112 |
input-enable; |
| 113 |
bias-pull-down; |
| 114 |
}; |
| 115 |
}; |
| 116 |
}; |
| 117 |
gpio10 { |
| 118 |
gpio10_default_mode: gpio10_default { |
| 119 |
default_mux { |
| 120 |
function = "gpio"; |
| 121 |
groups = "gpio10_d_1"; |
| 122 |
}; |
| 123 |
default_cfg { |
| 124 |
pins = "GPIO10_U17"; |
| 125 |
input-enable; |
| 126 |
bias-pull-down; |
| 127 |
}; |
| 128 |
}; |
| 129 |
}; |
| 130 |
gpio11 { |
| 131 |
gpio11_default_mode: gpio11_default { |
| 132 |
default_mux { |
| 133 |
function = "gpio"; |
| 134 |
groups = "gpio11_d_1"; |
| 135 |
}; |
| 136 |
default_cfg { |
| 137 |
pins = "GPIO11_AA18"; |
| 138 |
input-enable; |
| 139 |
bias-pull-down; |
| 140 |
}; |
| 141 |
}; |
| 142 |
}; |
| 143 |
gpio12 { |
| 144 |
gpio12_default_mode: gpio12_default { |
| 145 |
default_mux { |
| 146 |
function = "gpio"; |
| 147 |
groups = "gpio12_d_1"; |
| 148 |
}; |
| 149 |
default_cfg { |
| 150 |
pins = "GPIO12_U16"; |
| 151 |
input-enable; |
| 152 |
bias-pull-down; |
| 153 |
}; |
| 154 |
}; |
| 155 |
}; |
| 156 |
gpio13 { |
| 157 |
gpio13_default_mode: gpio13_default { |
| 158 |
default_mux { |
| 159 |
function = "gpio"; |
| 160 |
groups = "gpio13_d_1"; |
| 161 |
}; |
| 162 |
default_cfg { |
| 163 |
pins = "GPIO13_W17"; |
| 164 |
input-enable; |
| 165 |
bias-pull-down; |
| 166 |
}; |
| 167 |
}; |
| 168 |
}; |
| 169 |
gpio16 { |
| 170 |
gpio16_default_mode: gpio16_default { |
| 171 |
default_mux { |
| 172 |
function = "gpio"; |
| 173 |
groups = "gpio16_a_1"; |
| 174 |
}; |
| 175 |
default_cfg { |
| 176 |
pins = "GPIO16_F15"; |
| 177 |
input-enable; |
| 178 |
bias-pull-down; |
| 179 |
}; |
| 180 |
}; |
| 181 |
}; |
| 182 |
gpio24 { |
| 183 |
gpio24_default_mode: gpio24_default { |
| 184 |
default_mux { |
| 185 |
function = "gpio"; |
| 186 |
groups = "gpio24_a_1"; |
| 187 |
}; |
| 188 |
default_cfg { |
| 189 |
pins = "GPIO24_T14"; |
| 190 |
input-enable; |
| 191 |
bias-pull-down; |
| 192 |
}; |
| 193 |
}; |
| 194 |
}; |
| 195 |
gpio25 { |
| 196 |
gpio25_default_mode: gpio25_default { |
| 197 |
default_mux { |
| 198 |
function = "gpio"; |
| 199 |
groups = "gpio25_a_1"; |
| 200 |
}; |
| 201 |
default_cfg { |
| 202 |
pins = "GPIO25_R16"; |
| 203 |
input-enable; |
| 204 |
bias-pull-down; |
| 205 |
}; |
| 206 |
}; |
| 207 |
}; |
| 208 |
gpio36 { |
| 209 |
gpio36_default_mode: gpio36_default { |
| 210 |
default_mux { |
| 211 |
function = "gpio"; |
| 212 |
groups = "gpio36_a_1"; |
| 213 |
}; |
| 214 |
default_cfg { |
| 215 |
pins = "GPIO36_A17"; |
| 216 |
input-enable; |
| 217 |
bias-pull-down; |
| 218 |
}; |
| 219 |
}; |
| 220 |
}; |
| 221 |
gpio37 { |
| 222 |
gpio37_default_mode: gpio37_default { |
| 223 |
default_mux { |
| 224 |
function = "gpio"; |
| 225 |
groups = "gpio37_a_1"; |
| 226 |
}; |
| 227 |
default_cfg { |
| 228 |
pins = "GPIO37_E15"; |
| 229 |
input-enable; |
| 230 |
bias-pull-down; |
| 231 |
}; |
| 232 |
}; |
| 233 |
}; |
| 234 |
gpio38 { |
| 235 |
gpio38_default_mode: gpio38_default { |
| 236 |
default_mux { |
| 237 |
function = "gpio"; |
| 238 |
groups = "gpio38_a_1"; |
| 239 |
}; |
| 240 |
default_cfg { |
| 241 |
pins = "GPIO38_C17"; |
| 242 |
input-enable; |
| 243 |
bias-pull-down; |
| 244 |
}; |
| 245 |
}; |
| 246 |
}; |
| 247 |
gpio39 { |
| 248 |
gpio39_default_mode: gpio39_default { |
| 249 |
default_mux { |
| 250 |
function = "gpio"; |
| 251 |
groups = "gpio39_a_1"; |
| 252 |
}; |
| 253 |
default_cfg { |
| 254 |
pins = "GPIO39_E16"; |
| 255 |
input-enable; |
| 256 |
bias-pull-down; |
| 257 |
}; |
| 258 |
}; |
| 259 |
}; |
| 260 |
gpio42 { |
| 261 |
gpio42_default_mode: gpio42_default { |
| 262 |
default_mux { |
| 263 |
function = "gpio"; |
| 264 |
groups = "gpio42_a_1"; |
| 265 |
}; |
| 266 |
default_cfg { |
| 267 |
pins = "GPIO42_U2"; |
| 268 |
input-enable; |
| 269 |
bias-pull-down; |
| 270 |
}; |
| 271 |
}; |
| 272 |
}; |
| 273 |
/* |
| 274 |
* Pins 26 and 35 muxed in as GPIO, and configured as OUTPUT LOW |
| 275 |
*/ |
| 276 |
gpio26 { |
| 277 |
gpio26_default_mode: gpio26_default { |
| 278 |
default_mux { |
| 279 |
function = "gpio"; |
| 280 |
groups = "gpio26_d_1"; |
| 281 |
}; |
| 282 |
default_cfg { |
| 283 |
pins = "GPIO26_M16"; |
| 284 |
output-low; |
| 285 |
}; |
| 286 |
}; |
| 287 |
}; |
| 288 |
gpio35 { |
| 289 |
gpio35_default_mode: gpio35_default { |
| 290 |
default_mux { |
| 291 |
function = "gpio"; |
| 292 |
groups = "gpio35_d_1"; |
| 293 |
}; |
| 294 |
default_cfg { |
| 295 |
pins = "GPIO35_W15"; |
| 296 |
output-low; |
| 297 |
}; |
| 298 |
}; |
| 299 |
}; |
| 300 |
/* |
| 301 |
* This sets up the YCBCR connector pins, i.e. analog video out. |
| 302 |
* Set as input with no bias. |
| 303 |
*/ |
| 304 |
ycbcr { |
| 305 |
ycbcr_default_mode: ycbcr_default { |
| 306 |
default_mux { |
| 307 |
function = "ycbcr"; |
| 308 |
groups = "ycbcr0123_d_1"; |
| 309 |
}; |
| 310 |
default_cfg { |
| 311 |
pins = "GPIO6_Y18", |
| 312 |
"GPIO7_AA20", |
| 313 |
"GPIO8_W18", |
| 314 |
"GPIO9_AA19"; |
| 315 |
input-enable; |
| 316 |
bias-disable; |
| 317 |
}; |
| 318 |
}; |
| 319 |
}; |
| 320 |
/* This sets up the PWM pins 14 and 15 */ |
| 321 |
pwm { |
| 322 |
pwm_default_mode: pwm_default { |
| 323 |
default_mux { |
| 324 |
function = "pwmout"; |
| 325 |
groups = "pwmout1_d_1", "pwmout2_d_1"; |
| 326 |
}; |
| 327 |
default_cfg { |
| 328 |
pins = "GPIO14_F14", |
| 329 |
"GPIO15_B17"; |
| 330 |
input-enable; |
| 331 |
bias-pull-down; |
| 332 |
}; |
| 333 |
}; |
| 334 |
}; |
| 335 |
/* This sets up audio interface 1 */ |
| 336 |
adi1 { |
| 337 |
adi1_default_mode: adi1_default { |
| 338 |
default_mux { |
| 339 |
function = "adi1"; |
| 340 |
groups = "adi1_d_1"; |
| 341 |
}; |
| 342 |
default_cfg { |
| 343 |
pins = "GPIO17_P5", |
| 344 |
"GPIO18_R5", |
| 345 |
"GPIO19_U5", |
| 346 |
"GPIO20_T5"; |
| 347 |
input-enable; |
| 348 |
bias-pull-down; |
| 349 |
}; |
| 350 |
}; |
| 351 |
}; |
| 352 |
/* This sets up the USB UICC pins */ |
| 353 |
usbuicc { |
| 354 |
usbuicc_default_mode: usbuicc_default { |
| 355 |
default_mux { |
| 356 |
function = "usbuicc"; |
| 357 |
groups = "usbuicc_d_1"; |
| 358 |
}; |
| 359 |
default_cfg { |
| 360 |
pins = "GPIO21_H19", |
| 361 |
"GPIO22_G20", |
| 362 |
"GPIO23_G19"; |
| 363 |
input-enable; |
| 364 |
bias-pull-down; |
| 365 |
}; |
| 366 |
}; |
| 367 |
}; |
| 368 |
/* This sets up the microphone pins */ |
| 369 |
dmic { |
| 370 |
dmic_default_mode: dmic_default { |
| 371 |
default_mux { |
| 372 |
function = "dmic"; |
| 373 |
groups = "dmic12_d_1", |
| 374 |
"dmic34_d_1", |
| 375 |
"dmic56_d_1"; |
| 376 |
}; |
| 377 |
default_cfg { |
| 378 |
pins = "GPIO27_J6", |
| 379 |
"GPIO28_K6", |
| 380 |
"GPIO29_G6", |
| 381 |
"GPIO30_H6", |
| 382 |
"GPIO31_F5", |
| 383 |
"GPIO32_G5"; |
| 384 |
input-enable; |
| 385 |
bias-pull-down; |
| 386 |
}; |
| 387 |
}; |
| 388 |
}; |
| 389 |
extcpena { |
| 390 |
extcpena_default_mode: extcpena_default { |
| 391 |
default_mux { |
| 392 |
function = "extcpena"; |
| 393 |
groups = "extcpena_d_1"; |
| 394 |
}; |
| 395 |
default_cfg { |
| 396 |
pins = "GPIO34_R17"; |
| 397 |
input-enable; |
| 398 |
bias-pull-down; |
| 399 |
}; |
| 400 |
}; |
| 401 |
}; |
| 402 |
/* Modem I2C setup (SCL and SDA pins) */ |
| 403 |
modsclsda { |
| 404 |
modsclsda_default_mode: modsclsda_default { |
| 405 |
default_mux { |
| 406 |
function = "modsclsda"; |
| 407 |
groups = "modsclsda_d_1"; |
| 408 |
}; |
| 409 |
default_cfg { |
| 410 |
pins = "GPIO40_T19", |
| 411 |
"GPIO41_U19"; |
| 412 |
input-enable; |
| 413 |
bias-pull-down; |
| 414 |
}; |
| 415 |
}; |
| 416 |
}; |
| 417 |
/* |
| 418 |
* Clock output pins associated with regulators. |
| 419 |
*/ |
| 420 |
sysclkreq2 { |
| 421 |
sysclkreq2_default_mode: sysclkreq2_default { |
| 422 |
default_mux { |
| 423 |
function = "sysclkreq"; |
| 424 |
groups = "sysclkreq2_d_1"; |
| 425 |
}; |
| 426 |
default_cfg { |
| 427 |
pins = "GPIO1_T10"; |
| 428 |
input-enable; |
| 429 |
bias-disable; |
| 430 |
}; |
| 431 |
}; |
| 432 |
sysclkreq2_sleep_mode: sysclkreq2_sleep { |
| 433 |
default_mux { |
| 434 |
function = "gpio"; |
| 435 |
groups = "gpio1_a_1"; |
| 436 |
}; |
| 437 |
default_cfg { |
| 438 |
pins = "GPIO1_T10"; |
| 439 |
input-enable; |
| 440 |
bias-pull-down; |
| 441 |
}; |
| 442 |
}; |
| 443 |
}; |
| 444 |
sysclkreq4 { |
| 445 |
sysclkreq4_default_mode: sysclkreq4_default { |
| 446 |
default_mux { |
| 447 |
function = "sysclkreq"; |
| 448 |
groups = "sysclkreq4_d_1"; |
| 449 |
}; |
| 450 |
default_cfg { |
| 451 |
pins = "GPIO3_U9"; |
| 452 |
input-enable; |
| 453 |
bias-disable; |
| 454 |
}; |
| 455 |
}; |
| 456 |
sysclkreq4_sleep_mode: sysclkreq4_sleep { |
| 457 |
default_mux { |
| 458 |
function = "gpio"; |
| 459 |
groups = "gpio3_a_1"; |
| 460 |
}; |
| 461 |
default_cfg { |
| 462 |
pins = "GPIO3_U9"; |
| 463 |
input-enable; |
| 464 |
bias-pull-down; |
| 465 |
}; |
| 466 |
}; |
| 467 |
}; |
| 468 |
}; |
| 469 |
/* |
| 470 |
* Charging is not working on the HREF unless an actual battery is |
| 471 |
* mounted, most HREFs have a DC cable in to the "battery power" |
| 472 |
* which means this will only be cofusing. So do not enable charging |
| 473 |
* of the HREFs. |
| 474 |
*/ |
| 475 |
ab8500_fg { |
| 476 |
status = "disabled"; |
| 477 |
}; |
| 478 |
ab8500_btemp { |
| 479 |
status = "disabled"; |
| 480 |
}; |
| 481 |
ab8500_charger { |
| 482 |
status = "disabled"; |
| 483 |
}; |
| 484 |
ab8500_chargalg { |
| 485 |
status = "disabled"; |
| 486 |
}; |
| 487 |
}; |
| 488 |
}; |
| 489 |
}; |
| 490 |
}; |