| 1 |
/* |
| 2 |
* Copyright 2017 - Vikas MANOCHA <[email protected]> |
| 3 |
* |
| 4 |
* This file is dual-licensed: you can use it either under the terms |
| 5 |
* of the GPL or the X11 license, at your option. Note that this dual |
| 6 |
* licensing only applies to this file, and not this project as a |
| 7 |
* whole. |
| 8 |
* |
| 9 |
* a) This file is free software; you can redistribute it and/or |
| 10 |
* modify it under the terms of the GNU General Public License as |
| 11 |
* published by the Free Software Foundation; either version 2 of the |
| 12 |
* License, or (at your option) any later version. |
| 13 |
* |
| 14 |
* This file is distributed in the hope that it will be useful, |
| 15 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 16 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 17 |
* GNU General Public License for more details. |
| 18 |
* |
| 19 |
* Or, alternatively, |
| 20 |
* |
| 21 |
* b) Permission is hereby granted, free of charge, to any person |
| 22 |
* obtaining a copy of this software and associated documentation |
| 23 |
* files (the "Software"), to deal in the Software without |
| 24 |
* restriction, including without limitation the rights to use, |
| 25 |
* copy, modify, merge, publish, distribute, sublicense, and/or |
| 26 |
* sell copies of the Software, and to permit persons to whom the |
| 27 |
* Software is furnished to do so, subject to the following |
| 28 |
* conditions: |
| 29 |
* |
| 30 |
* The above copyright notice and this permission notice shall be |
| 31 |
* included in all copies or substantial portions of the Software. |
| 32 |
* |
| 33 |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 34 |
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| 35 |
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 36 |
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| 37 |
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| 38 |
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| 39 |
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| 40 |
* OTHER DEALINGS IN THE SOFTWARE. |
| 41 |
*/ |
| 42 |
|
| 43 |
/dts-v1/; |
| 44 |
#include "stm32f746.dtsi" |
| 45 |
#include "stm32f746-pinctrl.dtsi" |
| 46 |
#include <dt-bindings/gpio/gpio.h> |
| 47 |
#include <dt-bindings/input/input.h> |
| 48 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 49 |
#include <dt-bindings/leds/common.h> |
| 50 |
|
| 51 |
/ { |
| 52 |
model = "STMicroelectronics STM32F746-DISCO board"; |
| 53 |
compatible = "st,stm32f746-disco", "st,stm32f746"; |
| 54 |
|
| 55 |
chosen { |
| 56 |
bootargs = "root=/dev/ram"; |
| 57 |
stdout-path = "serial0:115200n8"; |
| 58 |
}; |
| 59 |
|
| 60 |
memory@c0000000 { |
| 61 |
device_type = "memory"; |
| 62 |
reg = <0xC0000000 0x800000>; |
| 63 |
}; |
| 64 |
|
| 65 |
reserved-memory { |
| 66 |
#address-cells = <1>; |
| 67 |
#size-cells = <1>; |
| 68 |
ranges; |
| 69 |
|
| 70 |
linux,cma { |
| 71 |
compatible = "shared-dma-pool"; |
| 72 |
no-map; |
| 73 |
size = <0x80000>; |
| 74 |
linux,dma-default; |
| 75 |
}; |
| 76 |
}; |
| 77 |
|
| 78 |
aliases { |
| 79 |
serial0 = &usart1; |
| 80 |
}; |
| 81 |
|
| 82 |
leds { |
| 83 |
compatible = "gpio-leds"; |
| 84 |
led_usr: led-usr { |
| 85 |
function = LED_FUNCTION_HEARTBEAT; |
| 86 |
color = <LED_COLOR_ID_GREEN>; |
| 87 |
gpios = <&gpioi 1 GPIO_ACTIVE_HIGH>; |
| 88 |
linux,default-trigger = "heartbeat"; |
| 89 |
}; |
| 90 |
}; |
| 91 |
|
| 92 |
gpio-keys { |
| 93 |
compatible = "gpio-keys"; |
| 94 |
autorepeat; |
| 95 |
button-0 { |
| 96 |
label = "User"; |
| 97 |
linux,code = <KEY_HOME>; |
| 98 |
gpios = <&gpioi 11 GPIO_ACTIVE_HIGH>; |
| 99 |
}; |
| 100 |
}; |
| 101 |
|
| 102 |
options { |
| 103 |
u-boot { |
| 104 |
compatible = "u-boot,config"; |
| 105 |
boot-led = <&led_usr>; |
| 106 |
}; |
| 107 |
}; |
| 108 |
|
| 109 |
usbotg_hs_phy: usb-phy { |
| 110 |
#phy-cells = <0>; |
| 111 |
compatible = "usb-nop-xceiv"; |
| 112 |
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHSULPI)>; |
| 113 |
clock-names = "main_clk"; |
| 114 |
}; |
| 115 |
|
| 116 |
/* This turns on vbus for otg fs for host mode (dwc2) */ |
| 117 |
vcc5v_otg_fs: vcc5v-otg-fs-regulator { |
| 118 |
compatible = "regulator-fixed"; |
| 119 |
gpio = <&gpiod 5 0>; |
| 120 |
regulator-name = "vcc5_host1"; |
| 121 |
regulator-always-on; |
| 122 |
}; |
| 123 |
|
| 124 |
vcc_3v3: vcc-3v3 { |
| 125 |
compatible = "regulator-fixed"; |
| 126 |
regulator-name = "vcc_3v3"; |
| 127 |
regulator-min-microvolt = <3300000>; |
| 128 |
regulator-max-microvolt = <3300000>; |
| 129 |
}; |
| 130 |
|
| 131 |
backlight: backlight { |
| 132 |
compatible = "gpio-backlight"; |
| 133 |
gpios = <&gpiok 3 GPIO_ACTIVE_HIGH>; |
| 134 |
status = "okay"; |
| 135 |
}; |
| 136 |
|
| 137 |
panel_rgb: panel-rgb { |
| 138 |
compatible = "rocktech,rk043fn48h"; |
| 139 |
power-supply = <&vcc_3v3>; |
| 140 |
backlight = <&backlight>; |
| 141 |
enable-gpios = <&gpioi 12 GPIO_ACTIVE_HIGH>; |
| 142 |
status = "okay"; |
| 143 |
port { |
| 144 |
panel_in_rgb: endpoint { |
| 145 |
remote-endpoint = <<dc_out_rgb>; |
| 146 |
}; |
| 147 |
}; |
| 148 |
}; |
| 149 |
}; |
| 150 |
|
| 151 |
&clk_hse { |
| 152 |
clock-frequency = <25000000>; |
| 153 |
}; |
| 154 |
|
| 155 |
&i2c1 { |
| 156 |
pinctrl-0 = <&i2c1_pins_b>; |
| 157 |
pinctrl-names = "default"; |
| 158 |
i2c-scl-rising-time-ns = <185>; |
| 159 |
i2c-scl-falling-time-ns = <20>; |
| 160 |
status = "okay"; |
| 161 |
}; |
| 162 |
|
| 163 |
&i2c3 { |
| 164 |
pinctrl-0 = <&i2c3_pins_a>; |
| 165 |
pinctrl-names = "default"; |
| 166 |
clock-frequency = <400000>; |
| 167 |
status = "okay"; |
| 168 |
|
| 169 |
touchscreen@38 { |
| 170 |
compatible = "edt,edt-ft5306"; |
| 171 |
reg = <0x38>; |
| 172 |
interrupt-parent = <&gpioi>; |
| 173 |
interrupts = <13 IRQ_TYPE_EDGE_FALLING>; |
| 174 |
touchscreen-size-x = <480>; |
| 175 |
touchscreen-size-y = <272>; |
| 176 |
}; |
| 177 |
}; |
| 178 |
|
| 179 |
<dc { |
| 180 |
pinctrl-0 = <<dc_pins_a>; |
| 181 |
pinctrl-names = "default"; |
| 182 |
status = "okay"; |
| 183 |
|
| 184 |
port { |
| 185 |
ltdc_out_rgb: endpoint { |
| 186 |
remote-endpoint = <&panel_in_rgb>; |
| 187 |
}; |
| 188 |
}; |
| 189 |
}; |
| 190 |
|
| 191 |
&sdio1 { |
| 192 |
status = "okay"; |
| 193 |
vmmc-supply = <&vcc_3v3>; |
| 194 |
cd-gpios = <&gpioc 13 GPIO_ACTIVE_LOW>; |
| 195 |
pinctrl-names = "default", "opendrain", "sleep"; |
| 196 |
pinctrl-0 = <&sdio_pins_a>; |
| 197 |
pinctrl-1 = <&sdio_pins_od_a>; |
| 198 |
pinctrl-2 = <&sdio_pins_sleep_a>; |
| 199 |
bus-width = <4>; |
| 200 |
}; |
| 201 |
|
| 202 |
&timers5 { |
| 203 |
/* Override timer5 to act as clockevent */ |
| 204 |
compatible = "st,stm32-timer"; |
| 205 |
interrupts = <50>; |
| 206 |
status = "okay"; |
| 207 |
/delete-property/#address-cells; |
| 208 |
/delete-property/#size-cells; |
| 209 |
/delete-property/clock-names; |
| 210 |
/delete-node/pwm; |
| 211 |
/delete-node/timer@4; |
| 212 |
}; |
| 213 |
|
| 214 |
&usart1 { |
| 215 |
pinctrl-0 = <&usart1_pins_b>; |
| 216 |
pinctrl-names = "default"; |
| 217 |
status = "okay"; |
| 218 |
}; |
| 219 |
|
| 220 |
&usbotg_fs { |
| 221 |
dr_mode = "host"; |
| 222 |
pinctrl-0 = <&usbotg_fs_pins_a>; |
| 223 |
pinctrl-names = "default"; |
| 224 |
status = "okay"; |
| 225 |
}; |
| 226 |
|
| 227 |
&usbotg_hs { |
| 228 |
dr_mode = "host"; |
| 229 |
phys = <&usbotg_hs_phy>; |
| 230 |
phy-names = "usb2-phy"; |
| 231 |
pinctrl-0 = <&usbotg_hs_pins_b>; |
| 232 |
pinctrl-names = "default"; |
| 233 |
status = "okay"; |
| 234 |
}; |