Debian Codegraph @

arch/arm/boot/dts/st/stm32746g-eval.dts

raw
1 /*
2 * Copyright 2015 - Maxime Coquelin <[email protected]>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
28 * conditions:
29 *
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
32 *
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43 /dts-v1/;
44 #include "stm32f746.dtsi"
45 #include "stm32f746-pinctrl.dtsi"
46 #include <dt-bindings/input/input.h>
47 #include <dt-bindings/interrupt-controller/irq.h>
48 #include <dt-bindings/leds/common.h>
49
50 / {
51 model = "STMicroelectronics STM32746g-EVAL board";
52 compatible = "st,stm32746g-eval", "st,stm32f746";
53
54 chosen {
55 bootargs = "root=/dev/ram";
56 stdout-path = "serial0:115200n8";
57 };
58
59 memory@c0000000 {
60 device_type = "memory";
61 reg = <0xc0000000 0x2000000>;
62 };
63
64 aliases {
65 serial0 = &usart1;
66 };
67
68 leds {
69 compatible = "gpio-leds";
70 led_green: led-green {
71 function = LED_FUNCTION_HEARTBEAT;
72 color = <LED_COLOR_ID_GREEN>;
73 gpios = <&gpiof 10 1>;
74 linux,default-trigger = "heartbeat";
75 };
76 led-orange {
77 color = <LED_COLOR_ID_ORANGE>;
78 gpios = <&stmfx_pinctrl 17 1>;
79 };
80 led-red {
81 color = <LED_COLOR_ID_RED>;
82 gpios = <&gpiob 7 1>;
83 };
84 led-blue {
85 color = <LED_COLOR_ID_BLUE>;
86 gpios = <&stmfx_pinctrl 19 1>;
87 };
88 };
89
90 gpio-keys {
91 compatible = "gpio-keys";
92 autorepeat;
93 button-0 {
94 label = "Wake up";
95 linux,code = <KEY_WAKEUP>;
96 gpios = <&gpioc 13 0>;
97 };
98 };
99
100 joystick {
101 compatible = "gpio-keys";
102 pinctrl-0 = <&joystick_pins>;
103 pinctrl-names = "default";
104 button-0 {
105 label = "JoySel";
106 linux,code = <KEY_ENTER>;
107 interrupt-parent = <&stmfx_pinctrl>;
108 interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
109 };
110 button-1 {
111 label = "JoyDown";
112 linux,code = <KEY_DOWN>;
113 interrupt-parent = <&stmfx_pinctrl>;
114 interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
115 };
116 button-2 {
117 label = "JoyLeft";
118 linux,code = <KEY_LEFT>;
119 interrupt-parent = <&stmfx_pinctrl>;
120 interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
121 };
122 button-3 {
123 label = "JoyRight";
124 linux,code = <KEY_RIGHT>;
125 interrupt-parent = <&stmfx_pinctrl>;
126 interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
127 };
128 button-4 {
129 label = "JoyUp";
130 linux,code = <KEY_UP>;
131 interrupt-parent = <&stmfx_pinctrl>;
132 interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
133 };
134 };
135
136 options {
137 u-boot {
138 compatible = "u-boot,config";
139 boot-led = <&led_green>;
140 };
141 };
142
143 usbotg_hs_phy: usb-phy {
144 #phy-cells = <0>;
145 compatible = "usb-nop-xceiv";
146 clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHSULPI)>;
147 clock-names = "main_clk";
148 };
149
150 mmc_vcard: mmc_vcard {
151 compatible = "regulator-fixed";
152 regulator-name = "mmc_vcard";
153 regulator-min-microvolt = <3300000>;
154 regulator-max-microvolt = <3300000>;
155 };
156 };
157
158 &clk_hse {
159 clock-frequency = <25000000>;
160 };
161
162 &crc {
163 status = "okay";
164 };
165
166 &i2c1 {
167 pinctrl-0 = <&i2c1_pins_b>;
168 pinctrl-names = "default";
169 i2c-scl-rising-time-ns = <185>;
170 i2c-scl-falling-time-ns = <20>;
171 status = "okay";
172
173 stmfx: stmfx@42 {
174 compatible = "st,stmfx-0300";
175 reg = <0x42>;
176 interrupts = <8 IRQ_TYPE_EDGE_RISING>;
177 interrupt-parent = <&gpioi>;
178
179 stmfx_pinctrl: pinctrl {
180 compatible = "st,stmfx-0300-pinctrl";
181 gpio-controller;
182 #gpio-cells = <2>;
183 interrupt-controller;
184 #interrupt-cells = <2>;
185 gpio-ranges = <&stmfx_pinctrl 0 0 24>;
186
187 joystick_pins: joystick {
188 pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
189 drive-push-pull;
190 bias-pull-up;
191 };
192 };
193 };
194 };
195
196 &rtc {
197 status = "okay";
198 };
199
200 &sdio1 {
201 status = "okay";
202 vmmc-supply = <&mmc_vcard>;
203 broken-cd;
204 pinctrl-names = "default", "opendrain", "sleep";
205 pinctrl-0 = <&sdio_pins_a>;
206 pinctrl-1 = <&sdio_pins_od_a>;
207 pinctrl-2 = <&sdio_pins_sleep_a>;
208 bus-width = <4>;
209 };
210
211 &timers5 {
212 /* Override timer5 to act as clockevent */
213 compatible = "st,stm32-timer";
214 interrupts = <50>;
215 status = "okay";
216 /delete-property/#address-cells;
217 /delete-property/#size-cells;
218 /delete-property/clock-names;
219 /delete-node/pwm;
220 /delete-node/timer@4;
221 };
222
223 &usart1 {
224 pinctrl-0 = <&usart1_pins_a>;
225 pinctrl-names = "default";
226 status = "okay";
227 };
228
229 &usbotg_hs {
230 dr_mode = "otg";
231 phys = <&usbotg_hs_phy>;
232 phy-names = "usb2-phy";
233 pinctrl-0 = <&usbotg_hs_pins_a>;
234 pinctrl-names = "default";
235 status = "okay";
236 };