| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* Copyright 2012 ST-Ericsson AB |
| 4 |
* |
| 5 |
* Device Tree for the HREF+ prior to the v60 variant. |
| 6 |
*/ |
| 7 |
|
| 8 |
#include "ste-href-ab8500.dtsi" |
| 9 |
#include "ste-href.dtsi" |
| 10 |
|
| 11 |
/ { |
| 12 |
gpio_keys { |
| 13 |
button@1 { |
| 14 |
gpios = <&tc3589x_gpio 7 GPIO_ACTIVE_HIGH>; |
| 15 |
}; |
| 16 |
}; |
| 17 |
|
| 18 |
soc { |
| 19 |
/* Enable UART1 on this board */ |
| 20 |
serial@80121000 { |
| 21 |
status = "okay"; |
| 22 |
}; |
| 23 |
|
| 24 |
i2c@80004000 { |
| 25 |
tps61052@33 { |
| 26 |
compatible = "ti,tps61052"; |
| 27 |
reg = <0x33>; |
| 28 |
}; |
| 29 |
|
| 30 |
tc35892@42 { |
| 31 |
compatible = "toshiba,tc35892"; |
| 32 |
reg = <0x42>; |
| 33 |
interrupt-parent = <&gpio6>; |
| 34 |
interrupts = <25 IRQ_TYPE_EDGE_RISING>; |
| 35 |
pinctrl-names = "default"; |
| 36 |
pinctrl-0 = <&tc35892_hrefprev60_mode>; |
| 37 |
|
| 38 |
interrupt-controller; |
| 39 |
#interrupt-cells = <1>; |
| 40 |
|
| 41 |
tc3589x_gpio: tc3589x_gpio { |
| 42 |
compatible = "tc3589x-gpio"; |
| 43 |
interrupts = <0>; |
| 44 |
|
| 45 |
interrupt-controller; |
| 46 |
#interrupt-cells = <2>; |
| 47 |
gpio-controller; |
| 48 |
#gpio-cells = <2>; |
| 49 |
}; |
| 50 |
}; |
| 51 |
}; |
| 52 |
|
| 53 |
spi@80002000 { |
| 54 |
/* |
| 55 |
* On the first generation boards, this SSP/SPI port was connected |
| 56 |
* to the AB8500. |
| 57 |
*/ |
| 58 |
pinctrl-names = "default"; |
| 59 |
pinctrl-0 = <&ssp0_hrefprev60_mode>; |
| 60 |
status = "okay"; |
| 61 |
}; |
| 62 |
|
| 63 |
// External Micro SD slot |
| 64 |
mmc@80126000 { |
| 65 |
cd-gpios = <&tc3589x_gpio 3 GPIO_ACTIVE_HIGH>; |
| 66 |
}; |
| 67 |
|
| 68 |
pinctrl { |
| 69 |
/* Set this up using hogs */ |
| 70 |
pinctrl-names = "default"; |
| 71 |
pinctrl-0 = <&ipgpio_hrefprev60_mode>; |
| 72 |
|
| 73 |
ssp0 { |
| 74 |
ssp0_hrefprev60_mode: ssp0_hrefprev60_default { |
| 75 |
hrefprev60_mux { |
| 76 |
function = "ssp0"; |
| 77 |
groups = "ssp0_a_1"; |
| 78 |
}; |
| 79 |
hrefprev60_cfg1 { |
| 80 |
pins = "GPIO145_C13"; /* RXD */ |
| 81 |
ste,config = <&in_pd>; |
| 82 |
}; |
| 83 |
|
| 84 |
}; |
| 85 |
}; |
| 86 |
sdi0 { |
| 87 |
/* This additional pin needed on early MOP500 and HREFs previous to v60 */ |
| 88 |
sdi0_default_mode: sdi0_default { |
| 89 |
hrefprev60_mux { |
| 90 |
function = "mc0"; |
| 91 |
groups = "mc0dat31dir_a_1"; |
| 92 |
}; |
| 93 |
hrefprev60_cfg1 { |
| 94 |
pins = "GPIO21_AB3"; /* DAT31DIR */ |
| 95 |
ste,config = <&out_hi>; |
| 96 |
}; |
| 97 |
|
| 98 |
}; |
| 99 |
}; |
| 100 |
tc35892 { |
| 101 |
tc35892_hrefprev60_mode: tc35892_hrefprev60 { |
| 102 |
hrefprev60_cfg { |
| 103 |
pins = "GPIO217_AH12"; |
| 104 |
ste,config = <&gpio_in_pu>; |
| 105 |
}; |
| 106 |
}; |
| 107 |
}; |
| 108 |
ipgpio { |
| 109 |
ipgpio_hrefprev60_mode: ipgpio_hrefprev60 { |
| 110 |
hrefprev60_mux { |
| 111 |
function = "ipgpio"; |
| 112 |
groups = "ipgpio0_c_1", "ipgpio1_c_1"; |
| 113 |
}; |
| 114 |
hrefprev60_cfg1 { |
| 115 |
pins = "GPIO6_AF6", "GPIO7_AG5"; |
| 116 |
ste,config = <&in_pu>; |
| 117 |
}; |
| 118 |
}; |
| 119 |
}; |
| 120 |
}; |
| 121 |
}; |
| 122 |
}; |