| 1 |
// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) |
| 2 |
/* |
| 3 |
* Copyright (C) Linaro Ltd 2019 - All Rights Reserved |
| 4 |
* Author: Manivannan Sadhasivam <[email protected]> |
| 5 |
* Copyright (C) 2020 Marek Vasut <[email protected]> |
| 6 |
*/ |
| 7 |
|
| 8 |
/* Avenger96 uses DHCOR SoM configured for 1V8 IO operation */ |
| 9 |
#include "stm32mp15xx-dhcor-io1v8.dtsi" |
| 10 |
|
| 11 |
/ { |
| 12 |
aliases { |
| 13 |
ethernet0 = ðernet0; |
| 14 |
mmc0 = &sdmmc1; |
| 15 |
serial0 = &uart4; |
| 16 |
serial1 = &uart7; |
| 17 |
serial2 = &usart2; |
| 18 |
spi0 = &qspi; |
| 19 |
}; |
| 20 |
|
| 21 |
/* XTal Q1 */ |
| 22 |
cec_clock: clk-cec-fixed { |
| 23 |
#clock-cells = <0>; |
| 24 |
compatible = "fixed-clock"; |
| 25 |
clock-frequency = <24000000>; |
| 26 |
}; |
| 27 |
|
| 28 |
chosen { |
| 29 |
stdout-path = "serial0:115200n8"; |
| 30 |
}; |
| 31 |
|
| 32 |
hdmi-out { |
| 33 |
compatible = "hdmi-connector"; |
| 34 |
type = "a"; |
| 35 |
|
| 36 |
port { |
| 37 |
hdmi_con: endpoint { |
| 38 |
remote-endpoint = <&adv7513_out>; |
| 39 |
}; |
| 40 |
}; |
| 41 |
}; |
| 42 |
|
| 43 |
led { |
| 44 |
compatible = "gpio-leds"; |
| 45 |
led1 { |
| 46 |
label = "green:user0"; |
| 47 |
gpios = <&gpioz 7 GPIO_ACTIVE_HIGH>; |
| 48 |
linux,default-trigger = "heartbeat"; |
| 49 |
default-state = "off"; |
| 50 |
}; |
| 51 |
|
| 52 |
led2 { |
| 53 |
label = "green:user1"; |
| 54 |
gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>; |
| 55 |
linux,default-trigger = "mmc0"; |
| 56 |
default-state = "off"; |
| 57 |
}; |
| 58 |
|
| 59 |
led3 { |
| 60 |
label = "green:user2"; |
| 61 |
gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>; |
| 62 |
linux,default-trigger = "mmc1"; |
| 63 |
default-state = "off"; |
| 64 |
}; |
| 65 |
|
| 66 |
led4 { |
| 67 |
label = "green:user3"; |
| 68 |
gpios = <&gpiog 1 GPIO_ACTIVE_HIGH>; |
| 69 |
default-state = "off"; |
| 70 |
panic-indicator; |
| 71 |
}; |
| 72 |
}; |
| 73 |
|
| 74 |
sd_switch: regulator-sd_switch { |
| 75 |
compatible = "regulator-gpio"; |
| 76 |
regulator-name = "sd_switch"; |
| 77 |
regulator-min-microvolt = <1800000>; |
| 78 |
regulator-max-microvolt = <2900000>; |
| 79 |
regulator-type = "voltage"; |
| 80 |
regulator-always-on; |
| 81 |
|
| 82 |
gpios = <&gpioi 5 GPIO_ACTIVE_HIGH>; |
| 83 |
gpios-states = <0>; |
| 84 |
states = <1800000 0x1>, |
| 85 |
<2900000 0x0>; |
| 86 |
}; |
| 87 |
|
| 88 |
sound { |
| 89 |
compatible = "audio-graph-card"; |
| 90 |
label = "STM32-AV96-HDMI"; |
| 91 |
dais = <&sai2a_port>; |
| 92 |
status = "okay"; |
| 93 |
}; |
| 94 |
|
| 95 |
wlan_pwr: regulator-wlan { |
| 96 |
compatible = "regulator-fixed"; |
| 97 |
|
| 98 |
regulator-name = "wl-reg"; |
| 99 |
regulator-min-microvolt = <3300000>; |
| 100 |
regulator-max-microvolt = <3300000>; |
| 101 |
|
| 102 |
gpio = <&gpioz 3 GPIO_ACTIVE_HIGH>; |
| 103 |
enable-active-high; |
| 104 |
}; |
| 105 |
}; |
| 106 |
|
| 107 |
&adc { |
| 108 |
pinctrl-names = "default"; |
| 109 |
pinctrl-0 = <&adc12_ain_pins_b>; |
| 110 |
vdd-supply = <&vdd>; |
| 111 |
vdda-supply = <&vdda>; |
| 112 |
vref-supply = <&vdda>; |
| 113 |
status = "okay"; |
| 114 |
}; |
| 115 |
|
| 116 |
&adc1 { |
| 117 |
channel@0 { |
| 118 |
reg = <0>; |
| 119 |
st,min-sample-time-ns = <5000>; |
| 120 |
}; |
| 121 |
|
| 122 |
channel@1 { |
| 123 |
reg = <1>; |
| 124 |
st,min-sample-time-ns = <5000>; |
| 125 |
}; |
| 126 |
|
| 127 |
channel@6 { |
| 128 |
reg = <6>; |
| 129 |
st,min-sample-time-ns = <5000>; |
| 130 |
}; |
| 131 |
}; |
| 132 |
|
| 133 |
&adc2 { |
| 134 |
channel@0 { |
| 135 |
reg = <0>; |
| 136 |
st,min-sample-time-ns = <5000>; |
| 137 |
}; |
| 138 |
|
| 139 |
channel@1 { |
| 140 |
reg = <1>; |
| 141 |
st,min-sample-time-ns = <5000>; |
| 142 |
}; |
| 143 |
|
| 144 |
channel@2 { |
| 145 |
reg = <2>; |
| 146 |
st,min-sample-time-ns = <5000>; |
| 147 |
}; |
| 148 |
}; |
| 149 |
|
| 150 |
&dcmi { |
| 151 |
pinctrl-names = "default", "sleep"; |
| 152 |
pinctrl-0 = <&dcmi_pins_c>; |
| 153 |
pinctrl-1 = <&dcmi_sleep_pins_c>; |
| 154 |
status = "disabled"; |
| 155 |
|
| 156 |
port { |
| 157 |
dcmi_0: endpoint { |
| 158 |
remote-endpoint = <&stmipi_2>; |
| 159 |
bus-type = <5>; |
| 160 |
bus-width = <8>; |
| 161 |
pclk-sample = <0>; |
| 162 |
}; |
| 163 |
}; |
| 164 |
}; |
| 165 |
|
| 166 |
ðernet0 { |
| 167 |
status = "okay"; |
| 168 |
pinctrl-0 = <ðernet0_rgmii_pins_c>; |
| 169 |
pinctrl-1 = <ðernet0_rgmii_sleep_pins_c>; |
| 170 |
pinctrl-names = "default", "sleep"; |
| 171 |
phy-mode = "rgmii"; |
| 172 |
max-speed = <1000>; |
| 173 |
phy-handle = <&phy0>; |
| 174 |
|
| 175 |
mdio { |
| 176 |
#address-cells = <1>; |
| 177 |
#size-cells = <0>; |
| 178 |
compatible = "snps,dwmac-mdio"; |
| 179 |
reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>; |
| 180 |
reset-delay-us = <1000>; |
| 181 |
reset-post-delay-us = <1000>; |
| 182 |
|
| 183 |
phy0: ethernet-phy@7 { |
| 184 |
reg = <7>; |
| 185 |
|
| 186 |
rxc-skew-ps = <1500>; |
| 187 |
rxdv-skew-ps = <540>; |
| 188 |
rxd0-skew-ps = <420>; |
| 189 |
rxd1-skew-ps = <420>; |
| 190 |
rxd2-skew-ps = <420>; |
| 191 |
rxd3-skew-ps = <420>; |
| 192 |
|
| 193 |
txc-skew-ps = <1440>; |
| 194 |
txen-skew-ps = <540>; |
| 195 |
txd0-skew-ps = <420>; |
| 196 |
txd1-skew-ps = <420>; |
| 197 |
txd2-skew-ps = <420>; |
| 198 |
txd3-skew-ps = <420>; |
| 199 |
}; |
| 200 |
}; |
| 201 |
}; |
| 202 |
|
| 203 |
&gpioa { |
| 204 |
gpio-line-names = "", "", "", "", |
| 205 |
"", "", "", "", |
| 206 |
"", "", "", "AV96-K", |
| 207 |
"AV96-I", "", "AV96-A", ""; |
| 208 |
}; |
| 209 |
|
| 210 |
&gpiob { |
| 211 |
gpio-line-names = "", "", "", "", |
| 212 |
"", "AV96-J", "", "", |
| 213 |
"", "", "", "AV96-B", |
| 214 |
"", "AV96-L", "", ""; |
| 215 |
}; |
| 216 |
|
| 217 |
&gpioc { |
| 218 |
gpio-line-names = "", "", "", "AV96-C", |
| 219 |
"", "", "", "", |
| 220 |
"", "", "", "", |
| 221 |
"", "", "", ""; |
| 222 |
}; |
| 223 |
|
| 224 |
&gpiod { |
| 225 |
gpio-line-names = "", "", "", "", |
| 226 |
"", "", "", "", |
| 227 |
"AV96-D", "", "", "", |
| 228 |
"", "", "AV96-E", "AV96-F"; |
| 229 |
}; |
| 230 |
|
| 231 |
&gpiof { |
| 232 |
gpio-line-names = "", "", "", "", |
| 233 |
"", "", "", "", |
| 234 |
"", "", "", "", |
| 235 |
"AV96-G", "AV96-H", "", ""; |
| 236 |
}; |
| 237 |
|
| 238 |
&i2c1 { /* X6 I2C1 */ |
| 239 |
pinctrl-names = "default"; |
| 240 |
pinctrl-0 = <&i2c1_pins_b>; |
| 241 |
i2c-scl-rising-time-ns = <185>; |
| 242 |
i2c-scl-falling-time-ns = <20>; |
| 243 |
status = "okay"; |
| 244 |
/delete-property/dmas; |
| 245 |
/delete-property/dma-names; |
| 246 |
}; |
| 247 |
|
| 248 |
&i2c2 { /* X6 I2C2 */ |
| 249 |
pinctrl-names = "default"; |
| 250 |
pinctrl-0 = <&i2c2_pins_c>; |
| 251 |
i2c-scl-rising-time-ns = <185>; |
| 252 |
i2c-scl-falling-time-ns = <20>; |
| 253 |
status = "okay"; |
| 254 |
/delete-property/dmas; |
| 255 |
/delete-property/dma-names; |
| 256 |
}; |
| 257 |
|
| 258 |
&i2c4 { |
| 259 |
stmipi: stmipi@14 { |
| 260 |
compatible = "st,st-mipid02"; |
| 261 |
pinctrl-names = "default", "sleep"; |
| 262 |
pinctrl-0 = <&mco1_pins_a>; |
| 263 |
pinctrl-1 = <&mco1_sleep_pins_a>; |
| 264 |
reg = <0x14>; |
| 265 |
clocks = <&rcc CK_MCO1>; |
| 266 |
clock-names = "xclk"; |
| 267 |
assigned-clocks = <&rcc CK_MCO1>; |
| 268 |
assigned-clock-parents = <&rcc CK_HSE>; |
| 269 |
assigned-clock-rates = <24000000>; |
| 270 |
VDDE-supply = <&v1v8>; |
| 271 |
VDDIN-supply = <&v1v8>; |
| 272 |
reset-gpios = <&gpioz 0 GPIO_ACTIVE_LOW>; |
| 273 |
status = "disabled"; |
| 274 |
|
| 275 |
ports { |
| 276 |
#address-cells = <1>; |
| 277 |
#size-cells = <0>; |
| 278 |
|
| 279 |
port@0 { |
| 280 |
reg = <0>; |
| 281 |
stmipi_0: endpoint { |
| 282 |
}; |
| 283 |
}; |
| 284 |
|
| 285 |
port@2 { |
| 286 |
reg = <2>; |
| 287 |
stmipi_2: endpoint { |
| 288 |
bus-width = <8>; |
| 289 |
hsync-active = <0>; |
| 290 |
vsync-active = <0>; |
| 291 |
pclk-sample = <0>; |
| 292 |
remote-endpoint = <&dcmi_0>; |
| 293 |
}; |
| 294 |
}; |
| 295 |
}; |
| 296 |
}; |
| 297 |
|
| 298 |
hdmi-transmitter@3d { |
| 299 |
compatible = "adi,adv7513"; |
| 300 |
reg = <0x3d>, <0x4d>, <0x2d>, <0x5d>; |
| 301 |
reg-names = "main", "edid", "cec", "packet"; |
| 302 |
clocks = <&cec_clock>; |
| 303 |
clock-names = "cec"; |
| 304 |
|
| 305 |
avdd-supply = <&v3v3>; |
| 306 |
dvdd-supply = <&v3v3>; |
| 307 |
pvdd-supply = <&v3v3>; |
| 308 |
dvdd-3v-supply = <&v3v3>; |
| 309 |
bgvdd-supply = <&v3v3>; |
| 310 |
|
| 311 |
interrupts = <9 IRQ_TYPE_EDGE_FALLING>; |
| 312 |
interrupt-parent = <&gpiog>; |
| 313 |
|
| 314 |
status = "okay"; |
| 315 |
|
| 316 |
adi,input-depth = <8>; |
| 317 |
adi,input-colorspace = "rgb"; |
| 318 |
adi,input-clock = "1x"; |
| 319 |
|
| 320 |
ports { |
| 321 |
#address-cells = <1>; |
| 322 |
#size-cells = <0>; |
| 323 |
|
| 324 |
port@0 { |
| 325 |
reg = <0>; |
| 326 |
adv7513_in: endpoint { |
| 327 |
remote-endpoint = <<dc_ep0_out>; |
| 328 |
}; |
| 329 |
}; |
| 330 |
|
| 331 |
port@1 { |
| 332 |
reg = <1>; |
| 333 |
adv7513_out: endpoint { |
| 334 |
remote-endpoint = <&hdmi_con>; |
| 335 |
}; |
| 336 |
}; |
| 337 |
|
| 338 |
port@2 { |
| 339 |
reg = <2>; |
| 340 |
adv7513_i2s0: endpoint { |
| 341 |
remote-endpoint = <&sai2a_endpoint>; |
| 342 |
}; |
| 343 |
}; |
| 344 |
}; |
| 345 |
}; |
| 346 |
|
| 347 |
dh_mac_eeprom: eeprom@53 { |
| 348 |
compatible = "atmel,24c02"; |
| 349 |
reg = <0x53>; |
| 350 |
pagesize = <16>; |
| 351 |
}; |
| 352 |
}; |
| 353 |
|
| 354 |
<dc { |
| 355 |
pinctrl-names = "default", "sleep"; |
| 356 |
pinctrl-0 = <<dc_pins_d>; |
| 357 |
pinctrl-1 = <<dc_sleep_pins_d>; |
| 358 |
status = "okay"; |
| 359 |
|
| 360 |
port { |
| 361 |
ltdc_ep0_out: endpoint { |
| 362 |
remote-endpoint = <&adv7513_in>; |
| 363 |
}; |
| 364 |
}; |
| 365 |
}; |
| 366 |
|
| 367 |
&sai2 { |
| 368 |
clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>; |
| 369 |
pinctrl-names = "default", "sleep"; |
| 370 |
pinctrl-0 = <&sai2a_pins_c>; |
| 371 |
pinctrl-1 = <&sai2a_sleep_pins_c>; |
| 372 |
clock-names = "pclk", "x8k", "x11k"; |
| 373 |
status = "okay"; |
| 374 |
|
| 375 |
sai2a: audio-controller@4400b004 { |
| 376 |
#clock-cells = <0>; |
| 377 |
dma-names = "tx"; |
| 378 |
clocks = <&rcc SAI2_K>; |
| 379 |
clock-names = "sai_ck"; |
| 380 |
status = "okay"; |
| 381 |
|
| 382 |
sai2a_port: port { |
| 383 |
sai2a_endpoint: endpoint { |
| 384 |
remote-endpoint = <&adv7513_i2s0>; |
| 385 |
dai-format = "i2s"; |
| 386 |
mclk-fs = <256>; |
| 387 |
}; |
| 388 |
}; |
| 389 |
}; |
| 390 |
}; |
| 391 |
|
| 392 |
&sdmmc1 { |
| 393 |
pinctrl-names = "default", "opendrain", "sleep"; |
| 394 |
pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>; |
| 395 |
pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_b>; |
| 396 |
pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_b>; |
| 397 |
cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; |
| 398 |
disable-wp; |
| 399 |
st,sig-dir; |
| 400 |
st,neg-edge; |
| 401 |
st,use-ckin; |
| 402 |
bus-width = <4>; |
| 403 |
vmmc-supply = <&vdd_sd>; |
| 404 |
vqmmc-supply = <&sd_switch>; |
| 405 |
status = "okay"; |
| 406 |
}; |
| 407 |
|
| 408 |
&sdmmc2 { |
| 409 |
pinctrl-names = "default", "opendrain", "sleep"; |
| 410 |
pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_c>; |
| 411 |
pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_c>; |
| 412 |
pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_c>; |
| 413 |
bus-width = <8>; |
| 414 |
mmc-ddr-1_8v; |
| 415 |
no-sd; |
| 416 |
no-sdio; |
| 417 |
non-removable; |
| 418 |
st,neg-edge; |
| 419 |
vmmc-supply = <&v3v3>; |
| 420 |
vqmmc-supply = <&vdd_io>; |
| 421 |
status = "okay"; |
| 422 |
}; |
| 423 |
|
| 424 |
&sdmmc3 { |
| 425 |
pinctrl-names = "default", "opendrain", "sleep"; |
| 426 |
pinctrl-0 = <&sdmmc3_b4_pins_b>; |
| 427 |
pinctrl-1 = <&sdmmc3_b4_od_pins_b>; |
| 428 |
pinctrl-2 = <&sdmmc3_b4_sleep_pins_b>; |
| 429 |
broken-cd; |
| 430 |
non-removable; |
| 431 |
st,neg-edge; |
| 432 |
bus-width = <4>; |
| 433 |
vmmc-supply = <&wlan_pwr>; |
| 434 |
status = "okay"; |
| 435 |
|
| 436 |
#address-cells = <1>; |
| 437 |
#size-cells = <0>; |
| 438 |
brcmf: wifi@1 { |
| 439 |
reg = <1>; |
| 440 |
compatible = "brcm,bcm4329-fmac"; |
| 441 |
}; |
| 442 |
}; |
| 443 |
|
| 444 |
&spi2 { |
| 445 |
pinctrl-names = "default"; |
| 446 |
pinctrl-0 = <&spi2_pins_a>; |
| 447 |
cs-gpios = <&gpioi 0 0>; |
| 448 |
status = "disabled"; |
| 449 |
/delete-property/dmas; |
| 450 |
/delete-property/dma-names; |
| 451 |
}; |
| 452 |
|
| 453 |
&uart4 { |
| 454 |
/* On Low speed expansion header */ |
| 455 |
label = "LS-UART1"; |
| 456 |
pinctrl-names = "default"; |
| 457 |
pinctrl-0 = <&uart4_pins_b>; |
| 458 |
/delete-property/dmas; |
| 459 |
/delete-property/dma-names; |
| 460 |
status = "okay"; |
| 461 |
}; |
| 462 |
|
| 463 |
&uart7 { |
| 464 |
/* On Low speed expansion header */ |
| 465 |
label = "LS-UART0"; |
| 466 |
pinctrl-names = "default"; |
| 467 |
pinctrl-0 = <&uart7_pins_a>; |
| 468 |
uart-has-rtscts; |
| 469 |
/delete-property/dmas; |
| 470 |
/delete-property/dma-names; |
| 471 |
status = "okay"; |
| 472 |
}; |
| 473 |
|
| 474 |
/* Bluetooth */ |
| 475 |
&usart2 { |
| 476 |
pinctrl-names = "default", "sleep"; |
| 477 |
pinctrl-0 = <&usart2_pins_a>; |
| 478 |
pinctrl-1 = <&usart2_sleep_pins_a>; |
| 479 |
uart-has-rtscts; |
| 480 |
/delete-property/dmas; |
| 481 |
/delete-property/dma-names; |
| 482 |
status = "okay"; |
| 483 |
|
| 484 |
bluetooth { |
| 485 |
compatible = "brcm,bcm43438-bt"; |
| 486 |
max-speed = <3000000>; |
| 487 |
shutdown-gpios = <&gpioz 6 GPIO_ACTIVE_HIGH>; |
| 488 |
}; |
| 489 |
}; |
| 490 |
|
| 491 |
&usbh_ehci { |
| 492 |
status = "okay"; |
| 493 |
}; |
| 494 |
|
| 495 |
&usbotg_hs { |
| 496 |
pinctrl-0 = <&usbotg_hs_pins_a>; |
| 497 |
pinctrl-names = "default"; |
| 498 |
phy-names = "usb2-phy"; |
| 499 |
phys = <&usbphyc_port1 0>; |
| 500 |
status = "okay"; |
| 501 |
vbus-supply = <&vbus_otg>; |
| 502 |
}; |
| 503 |
|
| 504 |
&usbphyc { |
| 505 |
status = "okay"; |
| 506 |
}; |
| 507 |
|
| 508 |
&usbphyc_port0 { |
| 509 |
phy-supply = <&vdd_usb>; |
| 510 |
}; |
| 511 |
|
| 512 |
&usbphyc_port1 { |
| 513 |
phy-supply = <&vdd_usb>; |
| 514 |
}; |