Debian Codegraph @

arch/arm/boot/dts/st/stm32f429-disco.dts

raw
1 /*
2 * Copyright 2015 - Maxime Coquelin <[email protected]>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public
20 * License along with this file; if not, write to the Free
21 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
22 * MA 02110-1301 USA
23 *
24 * Or, alternatively,
25 *
26 * b) Permission is hereby granted, free of charge, to any person
27 * obtaining a copy of this software and associated documentation
28 * files (the "Software"), to deal in the Software without
29 * restriction, including without limitation the rights to use,
30 * copy, modify, merge, publish, distribute, sublicense, and/or
31 * sell copies of the Software, and to permit persons to whom the
32 * Software is furnished to do so, subject to the following
33 * conditions:
34 *
35 * The above copyright notice and this permission notice shall be
36 * included in all copies or substantial portions of the Software.
37 *
38 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
39 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
40 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
41 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
42 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
43 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
44 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
45 * OTHER DEALINGS IN THE SOFTWARE.
46 */
47
48 /dts-v1/;
49 #include "stm32f429.dtsi"
50 #include "stm32f429-pinctrl.dtsi"
51 #include <dt-bindings/gpio/gpio.h>
52 #include <dt-bindings/input/input.h>
53 #include <dt-bindings/interrupt-controller/irq.h>
54 #include <dt-bindings/leds/common.h>
55
56 / {
57 model = "STMicroelectronics STM32F429i-DISCO board";
58 compatible = "st,stm32f429i-disco", "st,stm32f429";
59
60 chosen {
61 bootargs = "root=/dev/ram";
62 stdout-path = "serial0:115200n8";
63 };
64
65 memory@90000000 {
66 device_type = "memory";
67 reg = <0x90000000 0x800000>;
68 };
69
70 aliases {
71 serial0 = &usart1;
72 };
73
74 leds {
75 compatible = "gpio-leds";
76 led-red {
77 color = <LED_COLOR_ID_RED>;
78 gpios = <&gpiog 14 0>;
79 };
80 led_green: led-green {
81 function = LED_FUNCTION_HEARTBEAT;
82 color = <LED_COLOR_ID_GREEN>;
83 gpios = <&gpiog 13 0>;
84 linux,default-trigger = "heartbeat";
85 };
86 };
87
88 gpio-keys {
89 compatible = "gpio-keys";
90 autorepeat;
91 button-0 {
92 label = "User";
93 linux,code = <KEY_HOME>;
94 gpios = <&gpioa 0 0>;
95 };
96 };
97
98 options {
99 u-boot {
100 compatible = "u-boot,config";
101 boot-led = <&led_green>;
102 };
103 };
104
105 /* This turns on vbus for otg for host mode (dwc2) */
106 vcc5v_otg: vcc5v-otg-regulator {
107 compatible = "regulator-fixed";
108 gpio = <&gpioc 4 0>;
109 regulator-name = "vcc5_host1";
110 regulator-always-on;
111 };
112 };
113
114 &clk_hse {
115 clock-frequency = <8000000>;
116 };
117
118 &crc {
119 status = "okay";
120 };
121
122 &i2c3 {
123 pinctrl-names = "default";
124 pinctrl-0 = <&i2c3_pins>;
125 clock-frequency = <100000>;
126 status = "okay";
127
128 stmpe811@41 {
129 compatible = "st,stmpe811";
130 reg = <0x41>;
131 interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
132 interrupt-parent = <&gpioa>;
133 /* 3.25 MHz ADC clock speed */
134 st,adc-freq = <1>;
135 /* 12-bit ADC */
136 st,mod-12b = <1>;
137 /* internal ADC reference */
138 st,ref-sel = <0>;
139 /* ADC converstion time: 80 clocks */
140 st,sample-time = <4>;
141
142 stmpe_touchscreen {
143 compatible = "st,stmpe-ts";
144 /* 8 sample average control */
145 st,ave-ctrl = <3>;
146 /* 7 length fractional part in z */
147 st,fraction-z = <7>;
148 /*
149 * 50 mA typical 80 mA max touchscreen drivers
150 * current limit value
151 */
152 st,i-drive = <1>;
153 /* 1 ms panel driver settling time */
154 st,settling = <3>;
155 /* 5 ms touch detect interrupt delay */
156 st,touch-det-delay = <5>;
157 };
158
159 stmpe_adc {
160 compatible = "st,stmpe-adc";
161 /* forbid to use ADC channels 3-0 (touch) */
162 st,norequest-mask = <0x0F>;
163 };
164 };
165 };
166
167 &ltdc {
168 status = "okay";
169 pinctrl-0 = <&ltdc_pins_b>;
170 pinctrl-names = "default";
171
172 port {
173 ltdc_out_rgb: endpoint {
174 remote-endpoint = <&panel_in_rgb>;
175 };
176 };
177 };
178
179 &rtc {
180 assigned-clocks = <&rcc 1 CLK_RTC>;
181 assigned-clock-parents = <&rcc 1 CLK_LSI>;
182 status = "okay";
183 };
184
185 &spi5 {
186 status = "okay";
187 pinctrl-0 = <&spi5_pins>;
188 pinctrl-names = "default";
189 #address-cells = <1>;
190 #size-cells = <0>;
191 cs-gpios = <&gpioc 1 GPIO_ACTIVE_LOW>, <&gpioc 2 GPIO_ACTIVE_LOW>;
192
193 l3gd20: l3gd20@0 {
194 compatible = "st,l3gd20-gyro";
195 spi-max-frequency = <10000000>;
196 st,drdy-int-pin = <2>;
197 interrupt-parent = <&gpioa>;
198 interrupts = <1 IRQ_TYPE_EDGE_RISING>,
199 <2 IRQ_TYPE_EDGE_RISING>;
200 reg = <0>;
201 status = "okay";
202 };
203
204 display: display@1 {
205 /* Connect panel-ilitek-9341 to ltdc */
206 compatible = "st,sf-tc240t-9370-t", "ilitek,ili9341";
207 reg = <1>;
208 spi-3wire;
209 spi-max-frequency = <10000000>;
210 dc-gpios = <&gpiod 13 0>;
211 port {
212 panel_in_rgb: endpoint {
213 remote-endpoint = <&ltdc_out_rgb>;
214 };
215 };
216 };
217 };
218
219 &timers5 {
220 /* Override timer5 to act as clockevent */
221 compatible = "st,stm32-timer";
222 interrupts = <50>;
223 status = "okay";
224 /delete-property/#address-cells;
225 /delete-property/#size-cells;
226 /delete-property/clock-names;
227 /delete-node/pwm;
228 /delete-node/timer@4;
229 };
230
231 &usart1 {
232 pinctrl-0 = <&usart1_pins_a>;
233 pinctrl-names = "default";
234 status = "okay";
235 };
236
237 &usbotg_hs {
238 compatible = "st,stm32f4x9-fsotg";
239 dr_mode = "host";
240 pinctrl-0 = <&usbotg_fs_pins_b>;
241 pinctrl-names = "default";
242 status = "okay";
243 };