| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) |
| 2 |
/* |
| 3 |
* Copyright (C) 2022-2023 Steffen Trumtrar <[email protected]> |
| 4 |
* Copyright (C) Phytec GmbH 2019-2020 - All Rights Reserved |
| 5 |
* Author: Dom VOVARD <[email protected]>. |
| 6 |
*/ |
| 7 |
|
| 8 |
#include <dt-bindings/gpio/gpio.h> |
| 9 |
#include <dt-bindings/input/input.h> |
| 10 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 11 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 12 |
#include <dt-bindings/leds/common.h> |
| 13 |
#include <dt-bindings/leds/leds-pca9532.h> |
| 14 |
#include <dt-bindings/mfd/st,stpmic1.h> |
| 15 |
#include <dt-bindings/net/ti-dp83867.h> |
| 16 |
#include "stm32mp15-pinctrl.dtsi" |
| 17 |
|
| 18 |
/ { |
| 19 |
model = "PHYTEC phyCORE-STM32MP15 SOM"; |
| 20 |
compatible = "phytec,phycore-stm32mp157c-som", "st,stm32mp157"; |
| 21 |
|
| 22 |
aliases { |
| 23 |
ethernet0 = ðernet0; |
| 24 |
rtc0 = &i2c4_rtc; |
| 25 |
rtc1 = &rtc; |
| 26 |
}; |
| 27 |
|
| 28 |
chosen { |
| 29 |
stdout-path = "serial0:115200n8"; |
| 30 |
}; |
| 31 |
|
| 32 |
gpio-keys { |
| 33 |
compatible = "gpio-keys"; |
| 34 |
|
| 35 |
key-home { |
| 36 |
label = "Home"; |
| 37 |
gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; |
| 38 |
linux,code = <KEY_HOME>; |
| 39 |
}; |
| 40 |
|
| 41 |
key-enter { |
| 42 |
label = "Enter"; |
| 43 |
gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; |
| 44 |
linux,code = <KEY_ENTER>; |
| 45 |
}; |
| 46 |
}; |
| 47 |
|
| 48 |
reserved-memory { |
| 49 |
#address-cells = <1>; |
| 50 |
#size-cells = <1>; |
| 51 |
ranges; |
| 52 |
|
| 53 |
retram: retram@38000000 { |
| 54 |
compatible = "shared-dma-pool"; |
| 55 |
reg = <0x38000000 0x10000>; |
| 56 |
no-map; |
| 57 |
}; |
| 58 |
|
| 59 |
mcuram: mcuram@30000000 { |
| 60 |
compatible = "shared-dma-pool"; |
| 61 |
reg = <0x30000000 0x40000>; |
| 62 |
no-map; |
| 63 |
}; |
| 64 |
|
| 65 |
mcuram2: mcuram2@10000000 { |
| 66 |
compatible = "shared-dma-pool"; |
| 67 |
reg = <0x10000000 0x40000>; |
| 68 |
no-map; |
| 69 |
}; |
| 70 |
|
| 71 |
vdev0vring0: vdev0vring0@10040000 { |
| 72 |
compatible = "shared-dma-pool"; |
| 73 |
reg = <0x10040000 0x1000>; |
| 74 |
no-map; |
| 75 |
}; |
| 76 |
|
| 77 |
vdev0vring1: vdev0vring1@10041000 { |
| 78 |
compatible = "shared-dma-pool"; |
| 79 |
reg = <0x10041000 0x1000>; |
| 80 |
no-map; |
| 81 |
}; |
| 82 |
|
| 83 |
vdev0buffer: vdev0buffer@10042000 { |
| 84 |
compatible = "shared-dma-pool"; |
| 85 |
reg = <0x10042000 0x4000>; |
| 86 |
no-map; |
| 87 |
}; |
| 88 |
}; |
| 89 |
|
| 90 |
sound { |
| 91 |
compatible = "audio-graph-card"; |
| 92 |
label = "STM32MP1-PHYCORE"; |
| 93 |
routing = |
| 94 |
"Playback", "MCLK", /* Set a route between "MCLK" and "playback" widgets */ |
| 95 |
"Capture", "MCLK"; |
| 96 |
dais = <&sai2b_port>, |
| 97 |
<&sai2a_port>; |
| 98 |
}; |
| 99 |
|
| 100 |
regulator_vin: regulator { |
| 101 |
compatible = "regulator-fixed"; |
| 102 |
regulator-name = "vin"; |
| 103 |
regulator-min-microvolt = <5000000>; |
| 104 |
regulator-max-microvolt = <5000000>; |
| 105 |
regulator-always-on; |
| 106 |
}; |
| 107 |
}; |
| 108 |
|
| 109 |
ðernet0 { |
| 110 |
pinctrl-0 = <ðernet0_rgmii_pins_d>; |
| 111 |
pinctrl-1 = <ðernet0_rgmii_sleep_pins_d>; |
| 112 |
pinctrl-names = "default", "sleep"; |
| 113 |
phy-mode = "rgmii-id"; |
| 114 |
max-speed = <1000>; |
| 115 |
phy-handle = <&phy0>; |
| 116 |
st,eth-clk-sel; |
| 117 |
status = "okay"; |
| 118 |
|
| 119 |
mdio { |
| 120 |
#address-cells = <1>; |
| 121 |
#size-cells = <0>; |
| 122 |
compatible = "snps,dwmac-mdio"; |
| 123 |
|
| 124 |
phy0: ethernet-phy@1 { |
| 125 |
compatible = "ethernet-phy-ieee802.3-c22"; |
| 126 |
reg = <1>; |
| 127 |
interrupt-parent = <&gpiog>; |
| 128 |
interrupts = <12 IRQ_TYPE_EDGE_FALLING>; |
| 129 |
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; |
| 130 |
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; |
| 131 |
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; |
| 132 |
ti,min-output-impedance; |
| 133 |
enet-phy-lane-no-swap; |
| 134 |
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; |
| 135 |
}; |
| 136 |
}; |
| 137 |
}; |
| 138 |
|
| 139 |
&i2c1 { |
| 140 |
pinctrl-names = "default", "sleep"; |
| 141 |
pinctrl-0 = <&i2c1_pins_b>; |
| 142 |
pinctrl-1 = <&i2c1_sleep_pins_b>; |
| 143 |
i2c-scl-rising-time-ns = <100>; |
| 144 |
i2c-scl-falling-time-ns = <7>; |
| 145 |
status = "okay"; |
| 146 |
|
| 147 |
codec@18 { |
| 148 |
compatible = "ti,tlv320aic3007"; |
| 149 |
reg = <0x18>; |
| 150 |
#sound-dai-cells = <0>; |
| 151 |
|
| 152 |
ai3x-micbias-vg = <2>; |
| 153 |
|
| 154 |
AVDD-supply = <&v3v3>; |
| 155 |
IOVDD-supply = <&v3v3>; |
| 156 |
DRVDD-supply = <&v3v3>; |
| 157 |
DVDD-supply = <&v1v8_audio>; |
| 158 |
|
| 159 |
clocks = <&sai2b>; |
| 160 |
|
| 161 |
port { |
| 162 |
#address-cells = <1>; |
| 163 |
#size-cells = <0>; |
| 164 |
|
| 165 |
tlv320_tx_endpoint: endpoint@0 { |
| 166 |
reg = <0>; |
| 167 |
remote-endpoint = <&sai2b_endpoint>; |
| 168 |
frame-master; |
| 169 |
bitclock-master; |
| 170 |
}; |
| 171 |
|
| 172 |
tlv320_rx_endpoint: endpoint@1 { |
| 173 |
reg = <1>; |
| 174 |
remote-endpoint = <&sai2a_endpoint>; |
| 175 |
frame-master; |
| 176 |
bitclock-master; |
| 177 |
}; |
| 178 |
}; |
| 179 |
}; |
| 180 |
|
| 181 |
touch@44 { |
| 182 |
compatible = "st,stmpe811"; |
| 183 |
reg = <0x44>; |
| 184 |
interrupts = <3 IRQ_TYPE_EDGE_FALLING>; |
| 185 |
interrupt-parent = <&gpioi>; |
| 186 |
vio-supply = <&v3v3>; |
| 187 |
vcc-supply = <&v3v3>; |
| 188 |
st,sample-time = <4>; |
| 189 |
st,mod-12b = <1>; |
| 190 |
st,ref-sel = <0>; |
| 191 |
st,adc-freq = <1>; |
| 192 |
|
| 193 |
touchscreen { |
| 194 |
compatible = "st,stmpe-ts"; |
| 195 |
st,ave-ctrl = <1>; |
| 196 |
st,touch-det-delay = <2>; |
| 197 |
st,settling = <2>; |
| 198 |
st,fraction-z = <7>; |
| 199 |
st,i-drive = <1>; |
| 200 |
}; |
| 201 |
}; |
| 202 |
|
| 203 |
leds@62 { |
| 204 |
compatible = "nxp,pca9533"; |
| 205 |
reg = <0x62>; |
| 206 |
|
| 207 |
led-0 { |
| 208 |
color = <LED_COLOR_ID_RED>; |
| 209 |
function = LED_FUNCTION_POWER; |
| 210 |
type = <PCA9532_TYPE_LED>; |
| 211 |
}; |
| 212 |
|
| 213 |
led-1 { |
| 214 |
color = <LED_COLOR_ID_GREEN>; |
| 215 |
function = LED_FUNCTION_POWER; |
| 216 |
type = <PCA9532_TYPE_LED>; |
| 217 |
}; |
| 218 |
|
| 219 |
led-2 { |
| 220 |
color = <LED_COLOR_ID_BLUE>; |
| 221 |
function = LED_FUNCTION_HEARTBEAT; |
| 222 |
type = <PCA9532_TYPE_LED>; |
| 223 |
linux,default-trigger = "heartbeat"; |
| 224 |
}; |
| 225 |
}; |
| 226 |
}; |
| 227 |
|
| 228 |
&i2c4 { |
| 229 |
pinctrl-names = "default", "sleep"; |
| 230 |
pinctrl-0 = <&i2c4_pins_a>; |
| 231 |
pinctrl-1 = <&i2c4_sleep_pins_a>; |
| 232 |
i2c-scl-rising-time-ns = <185>; |
| 233 |
i2c-scl-falling-time-ns = <20>; |
| 234 |
status = "okay"; |
| 235 |
|
| 236 |
pmic@33 { |
| 237 |
compatible = "st,stpmic1"; |
| 238 |
reg = <0x33>; |
| 239 |
interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; |
| 240 |
interrupt-controller; |
| 241 |
#interrupt-cells = <2>; |
| 242 |
|
| 243 |
regulators { |
| 244 |
compatible = "st,stpmic1-regulators"; |
| 245 |
buck1-supply = <®ulator_vin>; |
| 246 |
buck2-supply = <®ulator_vin>; |
| 247 |
buck3-supply = <®ulator_vin>; |
| 248 |
buck4-supply = <®ulator_vin>; |
| 249 |
ldo1-supply = <&v3v3>; |
| 250 |
ldo2-supply = <&v3v3>; |
| 251 |
ldo3-supply = <&vdd_ddr>; |
| 252 |
ldo4-supply = <®ulator_vin>; |
| 253 |
ldo5-supply = <&v3v3>; |
| 254 |
ldo6-supply = <&v3v3>; |
| 255 |
boost-supply = <®ulator_vin>; |
| 256 |
pwr_sw1-supply = <&bst_out>; |
| 257 |
pwr_sw2-supply = <&bst_out>; |
| 258 |
|
| 259 |
vddcore: buck1 { |
| 260 |
regulator-name = "vddcore"; |
| 261 |
regulator-min-microvolt = <1200000>; |
| 262 |
regulator-max-microvolt = <1350000>; |
| 263 |
regulator-always-on; |
| 264 |
regulator-initial-mode = <0>; |
| 265 |
}; |
| 266 |
|
| 267 |
vdd_ddr: buck2 { |
| 268 |
regulator-name = "vdd_ddr"; |
| 269 |
regulator-min-microvolt = <1350000>; |
| 270 |
regulator-max-microvolt = <1350000>; |
| 271 |
regulator-always-on; |
| 272 |
regulator-initial-mode = <0>; |
| 273 |
}; |
| 274 |
|
| 275 |
vdd: buck3 { |
| 276 |
regulator-name = "vdd"; |
| 277 |
regulator-min-microvolt = <3300000>; |
| 278 |
regulator-max-microvolt = <3300000>; |
| 279 |
regulator-always-on; |
| 280 |
st,mask-reset; |
| 281 |
regulator-initial-mode = <0>; |
| 282 |
}; |
| 283 |
|
| 284 |
v3v3: buck4 { |
| 285 |
regulator-name = "v3v3"; |
| 286 |
regulator-min-microvolt = <3300000>; |
| 287 |
regulator-max-microvolt = <3300000>; |
| 288 |
regulator-always-on; |
| 289 |
regulator-initial-mode = <0>; |
| 290 |
}; |
| 291 |
|
| 292 |
v1v8_audio: ldo1 { |
| 293 |
regulator-name = "v1v8_audio"; |
| 294 |
regulator-min-microvolt = <1800000>; |
| 295 |
regulator-max-microvolt = <1800000>; |
| 296 |
regulator-always-on; |
| 297 |
interrupts = <IT_CURLIM_LDO1 0>; |
| 298 |
|
| 299 |
}; |
| 300 |
|
| 301 |
vdd_eth_2v5: ldo2 { |
| 302 |
regulator-name = "dd_eth_2v5"; |
| 303 |
regulator-min-microvolt = <2500000>; |
| 304 |
regulator-max-microvolt = <2500000>; |
| 305 |
regulator-always-on; |
| 306 |
interrupts = <IT_CURLIM_LDO2 0>; |
| 307 |
|
| 308 |
}; |
| 309 |
|
| 310 |
vtt_ddr: ldo3 { |
| 311 |
regulator-name = "vtt_ddr"; |
| 312 |
regulator-min-microvolt = <500000>; |
| 313 |
regulator-max-microvolt = <750000>; |
| 314 |
regulator-always-on; |
| 315 |
regulator-over-current-protection; |
| 316 |
}; |
| 317 |
|
| 318 |
vdd_usb: ldo4 { |
| 319 |
regulator-name = "vdd_usb"; |
| 320 |
interrupts = <IT_CURLIM_LDO4 0>; |
| 321 |
}; |
| 322 |
|
| 323 |
vdda: ldo5 { |
| 324 |
regulator-name = "vdda"; |
| 325 |
regulator-min-microvolt = <2900000>; |
| 326 |
regulator-max-microvolt = <2900000>; |
| 327 |
interrupts = <IT_CURLIM_LDO5 0>; |
| 328 |
regulator-boot-on; |
| 329 |
}; |
| 330 |
|
| 331 |
vdd_eth_1v0: ldo6 { |
| 332 |
regulator-name = "vdd_eth_1v0"; |
| 333 |
regulator-min-microvolt = <1000000>; |
| 334 |
regulator-max-microvolt = <1000000>; |
| 335 |
regulator-always-on; |
| 336 |
interrupts = <IT_CURLIM_LDO6 0>; |
| 337 |
|
| 338 |
}; |
| 339 |
|
| 340 |
vref_ddr: vref_ddr { |
| 341 |
regulator-name = "vref_ddr"; |
| 342 |
regulator-always-on; |
| 343 |
}; |
| 344 |
|
| 345 |
bst_out: boost { |
| 346 |
regulator-name = "bst_out"; |
| 347 |
interrupts = <IT_OCP_BOOST 0>; |
| 348 |
}; |
| 349 |
|
| 350 |
vbus_otg: pwr_sw1 { |
| 351 |
regulator-name = "vbus_otg"; |
| 352 |
interrupts = <IT_OCP_OTG 0>; |
| 353 |
regulator-active-discharge = <1>; |
| 354 |
}; |
| 355 |
|
| 356 |
vbus_sw: pwr_sw2 { |
| 357 |
regulator-name = "vbus_sw"; |
| 358 |
interrupts = <IT_OCP_SWOUT 0>; |
| 359 |
regulator-active-discharge = <1>; |
| 360 |
}; |
| 361 |
}; |
| 362 |
|
| 363 |
onkey { |
| 364 |
compatible = "st,stpmic1-onkey"; |
| 365 |
interrupts = <IT_PONKEY_F 0>, |
| 366 |
<IT_PONKEY_R 0>; |
| 367 |
interrupt-names = "onkey-falling", |
| 368 |
"onkey-rising"; |
| 369 |
power-off-time-sec = <10>; |
| 370 |
}; |
| 371 |
|
| 372 |
watchdog { |
| 373 |
compatible = "st,stpmic1-wdt"; |
| 374 |
}; |
| 375 |
}; |
| 376 |
|
| 377 |
i2c4_eeprom: eeprom@50 { |
| 378 |
compatible = "microchip,24c32", |
| 379 |
"atmel,24c32"; |
| 380 |
reg = <0x50>; |
| 381 |
}; |
| 382 |
|
| 383 |
i2c4_rtc: rtc@52 { |
| 384 |
compatible = "microcrystal,rv3028"; |
| 385 |
reg = <0x52>; |
| 386 |
}; |
| 387 |
}; |
| 388 |
|
| 389 |
&ipcc { |
| 390 |
status = "okay"; |
| 391 |
}; |
| 392 |
|
| 393 |
&iwdg2 { |
| 394 |
timeout-sec = <32>; |
| 395 |
status = "okay"; |
| 396 |
}; |
| 397 |
|
| 398 |
&m_can2 { |
| 399 |
pinctrl-names = "default", "sleep"; |
| 400 |
pinctrl-0 = <&m_can2_pins_a>; |
| 401 |
pinctrl-1 = <&m_can2_sleep_pins_a>; |
| 402 |
status = "okay"; |
| 403 |
}; |
| 404 |
|
| 405 |
&m4_rproc { |
| 406 |
memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, |
| 407 |
<&vdev0vring1>, <&vdev0buffer>; |
| 408 |
mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>; |
| 409 |
mbox-names = "vq0", "vq1", "shutdown", "detach"; |
| 410 |
interrupt-parent = <&exti>; |
| 411 |
interrupts = <68 1>; |
| 412 |
status = "okay"; |
| 413 |
}; |
| 414 |
|
| 415 |
&pwr_regulators { |
| 416 |
vdd-supply = <&vdd>; |
| 417 |
vdd_3v3_usbfs-supply = <&vdd_usb>; |
| 418 |
}; |
| 419 |
|
| 420 |
&qspi { |
| 421 |
pinctrl-names = "default", "sleep"; |
| 422 |
pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>; |
| 423 |
pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>; |
| 424 |
status = "okay"; |
| 425 |
|
| 426 |
flash0: flash@0 { |
| 427 |
compatible = "winbond,w25q128", "jedec,spi-nor"; |
| 428 |
reg = <0>; |
| 429 |
spi-rx-bus-width = <4>; |
| 430 |
spi-max-frequency = <50000000>; |
| 431 |
m25p,fast-read; |
| 432 |
#address-cells = <1>; |
| 433 |
#size-cells = <1>; |
| 434 |
}; |
| 435 |
}; |
| 436 |
|
| 437 |
&rng1 { |
| 438 |
status = "okay"; |
| 439 |
}; |
| 440 |
|
| 441 |
&rtc { |
| 442 |
status = "okay"; |
| 443 |
}; |
| 444 |
|
| 445 |
&sai2 { |
| 446 |
clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>; |
| 447 |
clock-names = "pclk", "x8k", "x11k"; |
| 448 |
pinctrl-names = "default", "sleep"; |
| 449 |
pinctrl-0 = <&sai2a_pins_b>, <&sai2b_pins_d>; |
| 450 |
pinctrl-1 = <&sai2a_sleep_pins_b>, <&sai2b_sleep_pins_d>; |
| 451 |
status = "okay"; |
| 452 |
}; |
| 453 |
|
| 454 |
&sai2a { |
| 455 |
dma-names = "rx"; |
| 456 |
st,sync = <&sai2b 2>; |
| 457 |
clocks = <&rcc SAI2_K>, <&sai2b>; |
| 458 |
clock-names = "sai_ck", "MCLK"; |
| 459 |
#clock-cells = <0>; |
| 460 |
|
| 461 |
sai2a_port: port { |
| 462 |
sai2a_endpoint: endpoint { |
| 463 |
remote-endpoint = <&tlv320_rx_endpoint>; |
| 464 |
mclk-fs = <256>; |
| 465 |
dai-tdm-slot-num = <2>; |
| 466 |
dai-tdm-slot-width = <16>; |
| 467 |
}; |
| 468 |
}; |
| 469 |
}; |
| 470 |
|
| 471 |
&sai2b { |
| 472 |
dma-names = "tx"; |
| 473 |
#clock-cells = <0>; |
| 474 |
|
| 475 |
sai2b_port: port { |
| 476 |
sai2b_endpoint: endpoint { |
| 477 |
remote-endpoint = <&tlv320_tx_endpoint>; |
| 478 |
mclk-fs = <256>; |
| 479 |
dai-tdm-slot-num = <2>; |
| 480 |
dai-tdm-slot-width = <16>; |
| 481 |
}; |
| 482 |
}; |
| 483 |
}; |
| 484 |
|
| 485 |
&sdmmc1 { |
| 486 |
pinctrl-names = "default", "opendrain", "sleep"; |
| 487 |
pinctrl-0 = <&sdmmc1_b4_pins_b>; |
| 488 |
pinctrl-1 = <&sdmmc1_b4_od_pins_b>; |
| 489 |
pinctrl-2 = <&sdmmc1_b4_sleep_pins_b>; |
| 490 |
cd-gpios = <&gpiof 3 GPIO_ACTIVE_LOW>; |
| 491 |
disable-wp; |
| 492 |
st,neg-edge; |
| 493 |
bus-width = <4>; |
| 494 |
vmmc-supply = <&v3v3>; |
| 495 |
status = "okay"; |
| 496 |
}; |
| 497 |
|
| 498 |
&sdmmc2 { |
| 499 |
pinctrl-names = "default", "opendrain", "sleep"; |
| 500 |
pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_e>; |
| 501 |
pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_e>; |
| 502 |
pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_e>; |
| 503 |
non-removable; |
| 504 |
no-sd; |
| 505 |
no-sdio; |
| 506 |
st,neg-edge; |
| 507 |
bus-width = <8>; |
| 508 |
vmmc-supply = <&v3v3>; |
| 509 |
vqmmc-supply = <&v3v3>; |
| 510 |
mmc-ddr-3_3v; |
| 511 |
}; |
| 512 |
|
| 513 |
&spi1 { |
| 514 |
pinctrl-names = "default", "sleep"; |
| 515 |
pinctrl-0 = <&spi1_pins_a>; |
| 516 |
pinctrl-1 = <&spi1_sleep_pins_a>; |
| 517 |
cs-gpios = <&gpioz 3 0>; |
| 518 |
status = "okay"; |
| 519 |
}; |
| 520 |
|
| 521 |
&uart4 { |
| 522 |
pinctrl-names = "default", "sleep", "idle"; |
| 523 |
pinctrl-0 = <&uart4_pins_a>; |
| 524 |
pinctrl-1 = <&uart4_sleep_pins_a>; |
| 525 |
pinctrl-2 = <&uart4_idle_pins_a>; |
| 526 |
pinctrl-3 = <&uart4_pins_a>; |
| 527 |
/delete-property/dmas; |
| 528 |
/delete-property/dma-names; |
| 529 |
status = "okay"; |
| 530 |
}; |
| 531 |
|
| 532 |
&usart1 { |
| 533 |
pinctrl-names = "default", "sleep", "idle"; |
| 534 |
pinctrl-0 = <&usart1_pins_b &usart1_pins_a>; |
| 535 |
pinctrl-1 = <&usart1_sleep_pins_b &usart1_sleep_pins_a>; |
| 536 |
pinctrl-2 = <&usart1_idle_pins_b &usart1_idle_pins_a>; |
| 537 |
uart-has-rtscts; |
| 538 |
status = "okay"; |
| 539 |
}; |
| 540 |
|
| 541 |
&usart3 { |
| 542 |
pinctrl-names = "default", "sleep", "idle"; |
| 543 |
pinctrl-0 = <&usart3_pins_a>; |
| 544 |
pinctrl-1 = <&usart3_sleep_pins_a>; |
| 545 |
pinctrl-2 = <&usart3_idle_pins_a>; |
| 546 |
status = "okay"; |
| 547 |
}; |
| 548 |
|
| 549 |
&usbh_ehci { |
| 550 |
status = "okay"; |
| 551 |
}; |
| 552 |
|
| 553 |
&usbh_ohci { |
| 554 |
status = "okay"; |
| 555 |
}; |
| 556 |
|
| 557 |
&usbotg_hs { |
| 558 |
phys = <&usbphyc_port1 0>; |
| 559 |
phy-names = "usb2-phy"; |
| 560 |
status = "okay"; |
| 561 |
}; |
| 562 |
|
| 563 |
&usbphyc { |
| 564 |
status = "okay"; |
| 565 |
}; |
| 566 |
|
| 567 |
&usbphyc_port0 { |
| 568 |
phy-supply = <&vdd_usb>; |
| 569 |
}; |
| 570 |
|
| 571 |
&usbphyc_port1 { |
| 572 |
phy-supply = <&vdd_usb>; |
| 573 |
}; |