| 1 |
/* |
| 2 |
* Copyright 2021 - Dillon Min <[email protected]> |
| 3 |
* |
| 4 |
* This file is dual-licensed: you can use it either under the terms |
| 5 |
* of the GPL or the X11 license, at your option. Note that this dual |
| 6 |
* licensing only applies to this file, and not this project as a |
| 7 |
* whole. |
| 8 |
* |
| 9 |
* a) This file is free software; you can redistribute it and/or |
| 10 |
* modify it under the terms of the GNU General Public License as |
| 11 |
* published by the Free Software Foundation; either version 2 of the |
| 12 |
* License, or (at your option) any later version. |
| 13 |
* |
| 14 |
* This file is distributed in the hope that it will be useful, |
| 15 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 16 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 17 |
* GNU General Public License for more details. |
| 18 |
* |
| 19 |
* Or, alternatively, |
| 20 |
* |
| 21 |
* b) Permission is hereby granted, free of charge, to any person |
| 22 |
* obtaining a copy of this software and associated documentation |
| 23 |
* files (the "Software"), to deal in the Software without |
| 24 |
* restriction, including without limitation the rights to use, |
| 25 |
* copy, modify, merge, publish, distribute, sublicense, and/or |
| 26 |
* sell copies of the Software, and to permit persons to whom the |
| 27 |
* Software is furnished to do so, subject to the following |
| 28 |
* conditions: |
| 29 |
* |
| 30 |
* The above copyright notice and this permission notice shall be |
| 31 |
* included in all copies or substantial portions of the Software. |
| 32 |
* |
| 33 |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 34 |
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| 35 |
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 36 |
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| 37 |
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| 38 |
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| 39 |
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| 40 |
* OTHER DEALINGS IN THE SOFTWARE. |
| 41 |
* |
| 42 |
* For art-pi board resources, you can refer to link: |
| 43 |
* https://art-pi.gitee.io/website/ |
| 44 |
*/ |
| 45 |
|
| 46 |
/dts-v1/; |
| 47 |
#include "stm32h750.dtsi" |
| 48 |
#include "stm32h7-pinctrl.dtsi" |
| 49 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 50 |
#include <dt-bindings/gpio/gpio.h> |
| 51 |
|
| 52 |
/ { |
| 53 |
model = "RT-Thread STM32H750i-ART-PI board"; |
| 54 |
compatible = "st,stm32h750i-art-pi", "st,stm32h750"; |
| 55 |
|
| 56 |
chosen { |
| 57 |
bootargs = "root=/dev/ram"; |
| 58 |
stdout-path = "serial0:2000000n8"; |
| 59 |
}; |
| 60 |
|
| 61 |
memory@c0000000 { |
| 62 |
device_type = "memory"; |
| 63 |
reg = <0xc0000000 0x2000000>; |
| 64 |
}; |
| 65 |
|
| 66 |
reserved-memory { |
| 67 |
#address-cells = <1>; |
| 68 |
#size-cells = <1>; |
| 69 |
ranges; |
| 70 |
|
| 71 |
linux,cma { |
| 72 |
compatible = "shared-dma-pool"; |
| 73 |
no-map; |
| 74 |
size = <0x100000>; |
| 75 |
linux,dma-default; |
| 76 |
}; |
| 77 |
}; |
| 78 |
|
| 79 |
aliases { |
| 80 |
serial0 = &uart4; |
| 81 |
serial1 = &usart3; |
| 82 |
}; |
| 83 |
|
| 84 |
leds { |
| 85 |
compatible = "gpio-leds"; |
| 86 |
led-red { |
| 87 |
gpios = <&gpioi 8 0>; |
| 88 |
}; |
| 89 |
led-green { |
| 90 |
gpios = <&gpioc 15 0>; |
| 91 |
linux,default-trigger = "heartbeat"; |
| 92 |
}; |
| 93 |
}; |
| 94 |
|
| 95 |
v3v3: regulator-v3v3 { |
| 96 |
compatible = "regulator-fixed"; |
| 97 |
regulator-name = "v3v3"; |
| 98 |
regulator-min-microvolt = <3300000>; |
| 99 |
regulator-max-microvolt = <3300000>; |
| 100 |
regulator-always-on; |
| 101 |
}; |
| 102 |
|
| 103 |
wlan_pwr: regulator-wlan { |
| 104 |
compatible = "regulator-fixed"; |
| 105 |
|
| 106 |
regulator-name = "wl-reg"; |
| 107 |
regulator-min-microvolt = <3300000>; |
| 108 |
regulator-max-microvolt = <3300000>; |
| 109 |
|
| 110 |
gpios = <&gpioc 13 GPIO_ACTIVE_HIGH>; |
| 111 |
enable-active-high; |
| 112 |
}; |
| 113 |
}; |
| 114 |
|
| 115 |
&clk_hse { |
| 116 |
clock-frequency = <25000000>; |
| 117 |
}; |
| 118 |
|
| 119 |
&dma1 { |
| 120 |
status = "okay"; |
| 121 |
}; |
| 122 |
|
| 123 |
&dma2 { |
| 124 |
status = "okay"; |
| 125 |
}; |
| 126 |
|
| 127 |
&mac { |
| 128 |
status = "disabled"; |
| 129 |
pinctrl-0 = <ðernet_rmii>; |
| 130 |
pinctrl-names = "default"; |
| 131 |
phy-mode = "rmii"; |
| 132 |
phy-handle = <&phy0>; |
| 133 |
|
| 134 |
mdio0 { |
| 135 |
#address-cells = <1>; |
| 136 |
#size-cells = <0>; |
| 137 |
compatible = "snps,dwmac-mdio"; |
| 138 |
phy0: ethernet-phy@0 { |
| 139 |
reg = <0>; |
| 140 |
}; |
| 141 |
}; |
| 142 |
}; |
| 143 |
|
| 144 |
&sdmmc1 { |
| 145 |
pinctrl-names = "default", "opendrain", "sleep"; |
| 146 |
pinctrl-0 = <&sdmmc1_b4_pins_a>; |
| 147 |
pinctrl-1 = <&sdmmc1_b4_od_pins_a>; |
| 148 |
pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; |
| 149 |
broken-cd; |
| 150 |
st,neg-edge; |
| 151 |
bus-width = <4>; |
| 152 |
vmmc-supply = <&v3v3>; |
| 153 |
status = "okay"; |
| 154 |
}; |
| 155 |
|
| 156 |
&sdmmc2 { |
| 157 |
pinctrl-names = "default", "opendrain", "sleep"; |
| 158 |
pinctrl-0 = <&sdmmc2_b4_pins_a>; |
| 159 |
pinctrl-1 = <&sdmmc2_b4_od_pins_a>; |
| 160 |
pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>; |
| 161 |
broken-cd; |
| 162 |
non-removable; |
| 163 |
st,neg-edge; |
| 164 |
bus-width = <4>; |
| 165 |
vmmc-supply = <&wlan_pwr>; |
| 166 |
status = "okay"; |
| 167 |
|
| 168 |
#address-cells = <1>; |
| 169 |
#size-cells = <0>; |
| 170 |
brcmf: wifi@1 { |
| 171 |
reg = <1>; |
| 172 |
compatible = "brcm,bcm4329-fmac"; |
| 173 |
}; |
| 174 |
}; |
| 175 |
|
| 176 |
&spi1 { |
| 177 |
status = "okay"; |
| 178 |
pinctrl-0 = <&spi1_pins>; |
| 179 |
pinctrl-names = "default"; |
| 180 |
cs-gpios = <&gpioa 4 GPIO_ACTIVE_LOW>; |
| 181 |
dmas = <&dmamux1 37 0x400 0x05>, |
| 182 |
<&dmamux1 38 0x400 0x05>; |
| 183 |
dma-names = "rx", "tx"; |
| 184 |
|
| 185 |
flash@0 { |
| 186 |
#address-cells = <1>; |
| 187 |
#size-cells = <1>; |
| 188 |
compatible = "winbond,w25q128", "jedec,spi-nor"; |
| 189 |
reg = <0>; |
| 190 |
spi-max-frequency = <80000000>; |
| 191 |
|
| 192 |
partition@0 { |
| 193 |
label = "root filesystem"; |
| 194 |
reg = <0 0x1000000>; |
| 195 |
}; |
| 196 |
}; |
| 197 |
}; |
| 198 |
|
| 199 |
&usart2 { |
| 200 |
pinctrl-0 = <&usart2_pins_a>; |
| 201 |
pinctrl-names = "default"; |
| 202 |
status = "disabled"; |
| 203 |
}; |
| 204 |
|
| 205 |
&usart3 { |
| 206 |
pinctrl-names = "default"; |
| 207 |
pinctrl-0 = <&usart3_pins_a>; |
| 208 |
dmas = <&dmamux1 45 0x400 0x05>, |
| 209 |
<&dmamux1 46 0x400 0x05>; |
| 210 |
dma-names = "rx", "tx"; |
| 211 |
uart-has-rtscts; |
| 212 |
status = "okay"; |
| 213 |
|
| 214 |
bluetooth { |
| 215 |
compatible = "brcm,bcm43438-bt"; |
| 216 |
host-wakeup-gpios = <&gpioc 0 GPIO_ACTIVE_HIGH>; |
| 217 |
device-wakeup-gpios = <&gpioi 10 GPIO_ACTIVE_HIGH>; |
| 218 |
shutdown-gpios = <&gpioi 11 GPIO_ACTIVE_HIGH>; |
| 219 |
max-speed = <115200>; |
| 220 |
}; |
| 221 |
}; |
| 222 |
|
| 223 |
&uart4 { |
| 224 |
pinctrl-0 = <&uart4_pins_a>; |
| 225 |
pinctrl-names = "default"; |
| 226 |
status = "okay"; |
| 227 |
}; |
| 228 |
|
| 229 |
|