| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Copyright (C) 2019 |
| 4 |
* Author(s): Giulio Benetti <[email protected]> |
| 5 |
*/ |
| 6 |
|
| 7 |
#include "../../armv7-m.dtsi" |
| 8 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 9 |
#include <dt-bindings/clock/imxrt1050-clock.h> |
| 10 |
#include <dt-bindings/gpio/gpio.h> |
| 11 |
|
| 12 |
/ { |
| 13 |
#address-cells = <1>; |
| 14 |
#size-cells = <1>; |
| 15 |
|
| 16 |
clocks { |
| 17 |
osc: osc { |
| 18 |
compatible = "fixed-clock"; |
| 19 |
#clock-cells = <0>; |
| 20 |
clock-frequency = <24000000>; |
| 21 |
}; |
| 22 |
|
| 23 |
osc3M: osc3M { |
| 24 |
compatible = "fixed-clock"; |
| 25 |
#clock-cells = <0>; |
| 26 |
clock-frequency = <3000000>; |
| 27 |
}; |
| 28 |
}; |
| 29 |
|
| 30 |
soc { |
| 31 |
lpuart1: serial@40184000 { |
| 32 |
compatible = "fsl,imxrt1050-lpuart", "fsl,imx7ulp-lpuart"; |
| 33 |
reg = <0x40184000 0x4000>; |
| 34 |
interrupts = <20>; |
| 35 |
clocks = <&clks IMXRT1050_CLK_LPUART1>; |
| 36 |
clock-names = "ipg"; |
| 37 |
status = "disabled"; |
| 38 |
}; |
| 39 |
|
| 40 |
iomuxc: pinctrl@401f8000 { |
| 41 |
compatible = "fsl,imxrt1050-iomuxc"; |
| 42 |
reg = <0x401f8000 0x4000>; |
| 43 |
fsl,mux_mask = <0x7>; |
| 44 |
}; |
| 45 |
|
| 46 |
anatop: anatop@400d8000 { |
| 47 |
compatible = "fsl,imxrt-anatop"; |
| 48 |
reg = <0x400d8000 0x4000>; |
| 49 |
}; |
| 50 |
|
| 51 |
clks: clock-controller@400fc000 { |
| 52 |
compatible = "fsl,imxrt1050-ccm"; |
| 53 |
reg = <0x400fc000 0x4000>; |
| 54 |
interrupts = <95>, <96>; |
| 55 |
clocks = <&osc>; |
| 56 |
clock-names = "osc"; |
| 57 |
#clock-cells = <1>; |
| 58 |
assigned-clocks = <&clks IMXRT1050_CLK_PLL1_BYPASS>, |
| 59 |
<&clks IMXRT1050_CLK_PLL1_BYPASS>, |
| 60 |
<&clks IMXRT1050_CLK_PLL2_BYPASS>, |
| 61 |
<&clks IMXRT1050_CLK_PLL3_BYPASS>, |
| 62 |
<&clks IMXRT1050_CLK_PLL3_PFD1_664_62M>, |
| 63 |
<&clks IMXRT1050_CLK_PLL2_PFD2_396M>; |
| 64 |
assigned-clock-parents = <&clks IMXRT1050_CLK_PLL1_REF_SEL>, |
| 65 |
<&clks IMXRT1050_CLK_PLL1_ARM>, |
| 66 |
<&clks IMXRT1050_CLK_PLL2_SYS>, |
| 67 |
<&clks IMXRT1050_CLK_PLL3_USB_OTG>, |
| 68 |
<&clks IMXRT1050_CLK_PLL3_USB_OTG>, |
| 69 |
<&clks IMXRT1050_CLK_PLL2_SYS>; |
| 70 |
}; |
| 71 |
|
| 72 |
edma1: dma-controller@400e8000 { |
| 73 |
#dma-cells = <2>; |
| 74 |
compatible = "fsl,imx7ulp-edma"; |
| 75 |
reg = <0x400e8000 0x4000>, |
| 76 |
<0x400ec000 0x4000>; |
| 77 |
dma-channels = <32>; |
| 78 |
interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, <8>, |
| 79 |
<9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>; |
| 80 |
clock-names = "dma", "dmamux0"; |
| 81 |
clocks = <&clks IMXRT1050_CLK_DMA>, |
| 82 |
<&clks IMXRT1050_CLK_DMA_MUX>; |
| 83 |
}; |
| 84 |
|
| 85 |
usdhc1: mmc@402c0000 { |
| 86 |
compatible = "fsl,imxrt1050-usdhc", "fsl,imx6sl-usdhc"; |
| 87 |
reg = <0x402c0000 0x4000>; |
| 88 |
interrupts = <110>; |
| 89 |
clocks = <&clks IMXRT1050_CLK_IPG_PDOF>, |
| 90 |
<&clks IMXRT1050_CLK_AHB_PODF>, |
| 91 |
<&clks IMXRT1050_CLK_USDHC1>; |
| 92 |
clock-names = "ipg", "ahb", "per"; |
| 93 |
bus-width = <4>; |
| 94 |
fsl,wp-controller; |
| 95 |
no-1-8-v; |
| 96 |
max-frequency = <200000000>; |
| 97 |
fsl,tuning-start-tap = <20>; |
| 98 |
fsl,tuning-step = <2>; |
| 99 |
status = "disabled"; |
| 100 |
}; |
| 101 |
|
| 102 |
gpio1: gpio@401b8000 { |
| 103 |
compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; |
| 104 |
reg = <0x401b8000 0x4000>; |
| 105 |
interrupts = <80>, <81>; |
| 106 |
gpio-controller; |
| 107 |
#gpio-cells = <2>; |
| 108 |
interrupt-controller; |
| 109 |
#interrupt-cells = <2>; |
| 110 |
}; |
| 111 |
|
| 112 |
gpio2: gpio@401bc000 { |
| 113 |
compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; |
| 114 |
reg = <0x401bc000 0x4000>; |
| 115 |
interrupts = <82>, <83>; |
| 116 |
gpio-controller; |
| 117 |
#gpio-cells = <2>; |
| 118 |
interrupt-controller; |
| 119 |
#interrupt-cells = <2>; |
| 120 |
}; |
| 121 |
|
| 122 |
gpio3: gpio@401c0000 { |
| 123 |
compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; |
| 124 |
reg = <0x401c0000 0x4000>; |
| 125 |
interrupts = <84>, <85>; |
| 126 |
gpio-controller; |
| 127 |
#gpio-cells = <2>; |
| 128 |
interrupt-controller; |
| 129 |
#interrupt-cells = <2>; |
| 130 |
}; |
| 131 |
|
| 132 |
gpio4: gpio@401c4000 { |
| 133 |
compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; |
| 134 |
reg = <0x401c4000 0x4000>; |
| 135 |
interrupts = <86>, <87>; |
| 136 |
gpio-controller; |
| 137 |
#gpio-cells = <2>; |
| 138 |
interrupt-controller; |
| 139 |
#interrupt-cells = <2>; |
| 140 |
}; |
| 141 |
|
| 142 |
gpio5: gpio@400c0000 { |
| 143 |
compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; |
| 144 |
reg = <0x400c0000 0x4000>; |
| 145 |
interrupts = <88>, <89>; |
| 146 |
gpio-controller; |
| 147 |
#gpio-cells = <2>; |
| 148 |
interrupt-controller; |
| 149 |
#interrupt-cells = <2>; |
| 150 |
}; |
| 151 |
|
| 152 |
gpt: timer@401ec000 { |
| 153 |
compatible = "fsl,imxrt1050-gpt", "fsl,imx6dl-gpt", "fsl,imx6sl-gpt"; |
| 154 |
reg = <0x401ec000 0x4000>; |
| 155 |
interrupts = <100>; |
| 156 |
clocks = <&osc3M>; |
| 157 |
clock-names = "per"; |
| 158 |
}; |
| 159 |
}; |
| 160 |
}; |