| 1 |
// SPDX-License-Identifier: GPL-2.0+ |
| 2 |
// |
| 3 |
// Copyright 2011 Freescale Semiconductor, Inc. |
| 4 |
// Copyright 2011 Linaro Ltd. |
| 5 |
|
| 6 |
#include "imx53-pinfunc.h" |
| 7 |
#include <dt-bindings/clock/imx5-clock.h> |
| 8 |
#include <dt-bindings/gpio/gpio.h> |
| 9 |
#include <dt-bindings/input/input.h> |
| 10 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 11 |
|
| 12 |
/ { |
| 13 |
#address-cells = <1>; |
| 14 |
#size-cells = <1>; |
| 15 |
/* |
| 16 |
* The decompressor and also some bootloaders rely on a |
| 17 |
* pre-existing /chosen node to be available to insert the |
| 18 |
* command line and merge other ATAGS info. |
| 19 |
*/ |
| 20 |
chosen {}; |
| 21 |
|
| 22 |
aliases { |
| 23 |
ethernet0 = &fec; |
| 24 |
gpio0 = &gpio1; |
| 25 |
gpio1 = &gpio2; |
| 26 |
gpio2 = &gpio3; |
| 27 |
gpio3 = &gpio4; |
| 28 |
gpio4 = &gpio5; |
| 29 |
gpio5 = &gpio6; |
| 30 |
gpio6 = &gpio7; |
| 31 |
i2c0 = &i2c1; |
| 32 |
i2c1 = &i2c2; |
| 33 |
i2c2 = &i2c3; |
| 34 |
ipu0 = &ipu; |
| 35 |
mmc0 = &esdhc1; |
| 36 |
mmc1 = &esdhc2; |
| 37 |
mmc2 = &esdhc3; |
| 38 |
mmc3 = &esdhc4; |
| 39 |
serial0 = &uart1; |
| 40 |
serial1 = &uart2; |
| 41 |
serial2 = &uart3; |
| 42 |
serial3 = &uart4; |
| 43 |
serial4 = &uart5; |
| 44 |
spi0 = &ecspi1; |
| 45 |
spi1 = &ecspi2; |
| 46 |
spi2 = &cspi; |
| 47 |
}; |
| 48 |
|
| 49 |
cpus { |
| 50 |
#address-cells = <1>; |
| 51 |
#size-cells = <0>; |
| 52 |
cpu0: cpu@0 { |
| 53 |
device_type = "cpu"; |
| 54 |
compatible = "arm,cortex-a8"; |
| 55 |
reg = <0x0>; |
| 56 |
clocks = <&clks IMX5_CLK_ARM>; |
| 57 |
clock-latency = <61036>; |
| 58 |
voltage-tolerance = <5>; |
| 59 |
operating-points = < |
| 60 |
/* kHz */ |
| 61 |
166666 850000 |
| 62 |
400000 900000 |
| 63 |
800000 1050000 |
| 64 |
1000000 1200000 |
| 65 |
1200000 1300000 |
| 66 |
>; |
| 67 |
}; |
| 68 |
}; |
| 69 |
|
| 70 |
display-subsystem { |
| 71 |
compatible = "fsl,imx-display-subsystem"; |
| 72 |
ports = <&ipu_di0>, <&ipu_di1>; |
| 73 |
}; |
| 74 |
|
| 75 |
capture_subsystem { |
| 76 |
compatible = "fsl,imx-capture-subsystem"; |
| 77 |
ports = <&ipu_csi0>, <&ipu_csi1>; |
| 78 |
}; |
| 79 |
|
| 80 |
tzic: tz-interrupt-controller@fffc000 { |
| 81 |
compatible = "fsl,imx53-tzic", "fsl,tzic"; |
| 82 |
interrupt-controller; |
| 83 |
#interrupt-cells = <1>; |
| 84 |
reg = <0x0fffc000 0x4000>; |
| 85 |
}; |
| 86 |
|
| 87 |
clocks { |
| 88 |
ckil { |
| 89 |
compatible = "fixed-clock"; |
| 90 |
#clock-cells = <0>; |
| 91 |
clock-frequency = <32768>; |
| 92 |
}; |
| 93 |
|
| 94 |
ckih1 { |
| 95 |
compatible = "fixed-clock"; |
| 96 |
#clock-cells = <0>; |
| 97 |
clock-frequency = <22579200>; |
| 98 |
}; |
| 99 |
|
| 100 |
ckih2 { |
| 101 |
compatible = "fixed-clock"; |
| 102 |
#clock-cells = <0>; |
| 103 |
clock-frequency = <0>; |
| 104 |
}; |
| 105 |
|
| 106 |
osc { |
| 107 |
compatible = "fixed-clock"; |
| 108 |
#clock-cells = <0>; |
| 109 |
clock-frequency = <24000000>; |
| 110 |
}; |
| 111 |
}; |
| 112 |
|
| 113 |
pmu: pmu { |
| 114 |
compatible = "arm,cortex-a8-pmu"; |
| 115 |
interrupt-parent = <&tzic>; |
| 116 |
interrupts = <77>; |
| 117 |
}; |
| 118 |
|
| 119 |
usbphy0: usbphy-0 { |
| 120 |
compatible = "usb-nop-xceiv"; |
| 121 |
clocks = <&clks IMX5_CLK_USB_PHY1_GATE>; |
| 122 |
clock-names = "main_clk"; |
| 123 |
#phy-cells = <0>; |
| 124 |
status = "okay"; |
| 125 |
}; |
| 126 |
|
| 127 |
usbphy1: usbphy-1 { |
| 128 |
compatible = "usb-nop-xceiv"; |
| 129 |
clocks = <&clks IMX5_CLK_USB_PHY2_GATE>; |
| 130 |
clock-names = "main_clk"; |
| 131 |
#phy-cells = <0>; |
| 132 |
status = "okay"; |
| 133 |
}; |
| 134 |
|
| 135 |
soc: soc { |
| 136 |
#address-cells = <1>; |
| 137 |
#size-cells = <1>; |
| 138 |
compatible = "simple-bus"; |
| 139 |
interrupt-parent = <&tzic>; |
| 140 |
ranges; |
| 141 |
|
| 142 |
sata: sata@10000000 { |
| 143 |
compatible = "fsl,imx53-ahci"; |
| 144 |
reg = <0x10000000 0x1000>; |
| 145 |
interrupts = <28>; |
| 146 |
clocks = <&clks IMX5_CLK_SATA_GATE>, |
| 147 |
<&clks IMX5_CLK_SATA_REF>, |
| 148 |
<&clks IMX5_CLK_AHB>; |
| 149 |
clock-names = "sata", "sata_ref", "ahb"; |
| 150 |
status = "disabled"; |
| 151 |
}; |
| 152 |
|
| 153 |
ipu: ipu@18000000 { |
| 154 |
#address-cells = <1>; |
| 155 |
#size-cells = <0>; |
| 156 |
compatible = "fsl,imx53-ipu"; |
| 157 |
reg = <0x18000000 0x08000000>; |
| 158 |
interrupts = <11 10>; |
| 159 |
clocks = <&clks IMX5_CLK_IPU_GATE>, |
| 160 |
<&clks IMX5_CLK_IPU_DI0_GATE>, |
| 161 |
<&clks IMX5_CLK_IPU_DI1_GATE>; |
| 162 |
clock-names = "bus", "di0", "di1"; |
| 163 |
resets = <&src 2>; |
| 164 |
|
| 165 |
ipu_csi0: port@0 { |
| 166 |
reg = <0>; |
| 167 |
|
| 168 |
ipu_csi0_from_parallel_sensor: endpoint { |
| 169 |
}; |
| 170 |
}; |
| 171 |
|
| 172 |
ipu_csi1: port@1 { |
| 173 |
reg = <1>; |
| 174 |
|
| 175 |
ipu_csi1_from_parallel_sensor: endpoint { |
| 176 |
}; |
| 177 |
}; |
| 178 |
|
| 179 |
ipu_di0: port@2 { |
| 180 |
#address-cells = <1>; |
| 181 |
#size-cells = <0>; |
| 182 |
reg = <2>; |
| 183 |
|
| 184 |
ipu_di0_disp0: endpoint@0 { |
| 185 |
reg = <0>; |
| 186 |
}; |
| 187 |
|
| 188 |
ipu_di0_lvds0: endpoint@1 { |
| 189 |
reg = <1>; |
| 190 |
remote-endpoint = <&lvds0_in>; |
| 191 |
}; |
| 192 |
}; |
| 193 |
|
| 194 |
ipu_di1: port@3 { |
| 195 |
#address-cells = <1>; |
| 196 |
#size-cells = <0>; |
| 197 |
reg = <3>; |
| 198 |
|
| 199 |
ipu_di1_disp1: endpoint@0 { |
| 200 |
reg = <0>; |
| 201 |
}; |
| 202 |
|
| 203 |
ipu_di1_lvds1: endpoint@1 { |
| 204 |
reg = <1>; |
| 205 |
remote-endpoint = <&lvds1_in>; |
| 206 |
}; |
| 207 |
|
| 208 |
ipu_di1_tve: endpoint@2 { |
| 209 |
reg = <2>; |
| 210 |
remote-endpoint = <&tve_in>; |
| 211 |
}; |
| 212 |
}; |
| 213 |
}; |
| 214 |
|
| 215 |
gpu: gpu@30000000 { |
| 216 |
compatible = "amd,imageon-200.0", "amd,imageon"; |
| 217 |
reg = <0x30000000 0x20000>; |
| 218 |
reg-names = "kgsl_3d0_reg_memory"; |
| 219 |
interrupts = <12>; |
| 220 |
interrupt-names = "kgsl_3d0_irq"; |
| 221 |
clocks = <&clks IMX5_CLK_GPU3D_GATE>, <&clks IMX5_CLK_GARB_GATE>; |
| 222 |
clock-names = "core_clk", "mem_iface_clk"; |
| 223 |
}; |
| 224 |
|
| 225 |
aips1: bus@50000000 { /* AIPS1 */ |
| 226 |
compatible = "fsl,aips-bus", "simple-bus"; |
| 227 |
#address-cells = <1>; |
| 228 |
#size-cells = <1>; |
| 229 |
reg = <0x50000000 0x10000000>; |
| 230 |
ranges; |
| 231 |
|
| 232 |
spba-bus@50000000 { |
| 233 |
compatible = "fsl,spba-bus", "simple-bus"; |
| 234 |
#address-cells = <1>; |
| 235 |
#size-cells = <1>; |
| 236 |
reg = <0x50000000 0x40000>; |
| 237 |
ranges; |
| 238 |
|
| 239 |
esdhc1: mmc@50004000 { |
| 240 |
compatible = "fsl,imx53-esdhc"; |
| 241 |
reg = <0x50004000 0x4000>; |
| 242 |
interrupts = <1>; |
| 243 |
clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>, |
| 244 |
<&clks IMX5_CLK_DUMMY>, |
| 245 |
<&clks IMX5_CLK_ESDHC1_PER_GATE>; |
| 246 |
clock-names = "ipg", "ahb", "per"; |
| 247 |
bus-width = <4>; |
| 248 |
status = "disabled"; |
| 249 |
}; |
| 250 |
|
| 251 |
esdhc2: mmc@50008000 { |
| 252 |
compatible = "fsl,imx53-esdhc"; |
| 253 |
reg = <0x50008000 0x4000>; |
| 254 |
interrupts = <2>; |
| 255 |
clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>, |
| 256 |
<&clks IMX5_CLK_DUMMY>, |
| 257 |
<&clks IMX5_CLK_ESDHC2_PER_GATE>; |
| 258 |
clock-names = "ipg", "ahb", "per"; |
| 259 |
bus-width = <4>; |
| 260 |
status = "disabled"; |
| 261 |
}; |
| 262 |
|
| 263 |
uart3: serial@5000c000 { |
| 264 |
compatible = "fsl,imx53-uart", "fsl,imx21-uart"; |
| 265 |
reg = <0x5000c000 0x4000>; |
| 266 |
interrupts = <33>; |
| 267 |
clocks = <&clks IMX5_CLK_UART3_IPG_GATE>, |
| 268 |
<&clks IMX5_CLK_UART3_PER_GATE>; |
| 269 |
clock-names = "ipg", "per"; |
| 270 |
dmas = <&sdma 42 4 0>, <&sdma 43 4 0>; |
| 271 |
dma-names = "rx", "tx"; |
| 272 |
status = "disabled"; |
| 273 |
}; |
| 274 |
|
| 275 |
ecspi1: spi@50010000 { |
| 276 |
#address-cells = <1>; |
| 277 |
#size-cells = <0>; |
| 278 |
compatible = "fsl,imx53-ecspi"; |
| 279 |
reg = <0x50010000 0x4000>; |
| 280 |
interrupts = <36>; |
| 281 |
clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>, |
| 282 |
<&clks IMX5_CLK_ECSPI1_PER_GATE>; |
| 283 |
clock-names = "ipg", "per"; |
| 284 |
status = "disabled"; |
| 285 |
}; |
| 286 |
|
| 287 |
ssi2: ssi@50014000 { |
| 288 |
#sound-dai-cells = <0>; |
| 289 |
compatible = "fsl,imx53-ssi", |
| 290 |
"fsl,imx51-ssi", |
| 291 |
"fsl,imx21-ssi"; |
| 292 |
reg = <0x50014000 0x4000>; |
| 293 |
interrupts = <30>; |
| 294 |
clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>, |
| 295 |
<&clks IMX5_CLK_SSI2_ROOT_GATE>; |
| 296 |
clock-names = "ipg", "baud"; |
| 297 |
dmas = <&sdma 24 1 0>, |
| 298 |
<&sdma 25 1 0>; |
| 299 |
dma-names = "rx", "tx"; |
| 300 |
fsl,fifo-depth = <15>; |
| 301 |
status = "disabled"; |
| 302 |
}; |
| 303 |
|
| 304 |
esdhc3: mmc@50020000 { |
| 305 |
compatible = "fsl,imx53-esdhc"; |
| 306 |
reg = <0x50020000 0x4000>; |
| 307 |
interrupts = <3>; |
| 308 |
clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>, |
| 309 |
<&clks IMX5_CLK_DUMMY>, |
| 310 |
<&clks IMX5_CLK_ESDHC3_PER_GATE>; |
| 311 |
clock-names = "ipg", "ahb", "per"; |
| 312 |
bus-width = <4>; |
| 313 |
status = "disabled"; |
| 314 |
}; |
| 315 |
|
| 316 |
esdhc4: mmc@50024000 { |
| 317 |
compatible = "fsl,imx53-esdhc"; |
| 318 |
reg = <0x50024000 0x4000>; |
| 319 |
interrupts = <4>; |
| 320 |
clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>, |
| 321 |
<&clks IMX5_CLK_DUMMY>, |
| 322 |
<&clks IMX5_CLK_ESDHC4_PER_GATE>; |
| 323 |
clock-names = "ipg", "ahb", "per"; |
| 324 |
bus-width = <4>; |
| 325 |
status = "disabled"; |
| 326 |
}; |
| 327 |
}; |
| 328 |
|
| 329 |
aipstz1: bridge@53f00000 { |
| 330 |
compatible = "fsl,imx53-aipstz"; |
| 331 |
reg = <0x53f00000 0x60>; |
| 332 |
}; |
| 333 |
|
| 334 |
usbotg: usb@53f80000 { |
| 335 |
compatible = "fsl,imx53-usb", "fsl,imx27-usb"; |
| 336 |
reg = <0x53f80000 0x0200>; |
| 337 |
interrupts = <18>; |
| 338 |
clocks = <&clks IMX5_CLK_USBOH3_GATE>; |
| 339 |
fsl,usbmisc = <&usbmisc 0>; |
| 340 |
fsl,usbphy = <&usbphy0>; |
| 341 |
status = "disabled"; |
| 342 |
}; |
| 343 |
|
| 344 |
usbh1: usb@53f80200 { |
| 345 |
compatible = "fsl,imx53-usb", "fsl,imx27-usb"; |
| 346 |
reg = <0x53f80200 0x0200>; |
| 347 |
interrupts = <14>; |
| 348 |
clocks = <&clks IMX5_CLK_USBOH3_GATE>; |
| 349 |
fsl,usbmisc = <&usbmisc 1>; |
| 350 |
fsl,usbphy = <&usbphy1>; |
| 351 |
dr_mode = "host"; |
| 352 |
status = "disabled"; |
| 353 |
}; |
| 354 |
|
| 355 |
usbh2: usb@53f80400 { |
| 356 |
compatible = "fsl,imx53-usb", "fsl,imx27-usb"; |
| 357 |
reg = <0x53f80400 0x0200>; |
| 358 |
interrupts = <16>; |
| 359 |
clocks = <&clks IMX5_CLK_USBOH3_GATE>; |
| 360 |
fsl,usbmisc = <&usbmisc 2>; |
| 361 |
dr_mode = "host"; |
| 362 |
status = "disabled"; |
| 363 |
}; |
| 364 |
|
| 365 |
usbh3: usb@53f80600 { |
| 366 |
compatible = "fsl,imx53-usb", "fsl,imx27-usb"; |
| 367 |
reg = <0x53f80600 0x0200>; |
| 368 |
interrupts = <17>; |
| 369 |
clocks = <&clks IMX5_CLK_USBOH3_GATE>; |
| 370 |
fsl,usbmisc = <&usbmisc 3>; |
| 371 |
dr_mode = "host"; |
| 372 |
status = "disabled"; |
| 373 |
}; |
| 374 |
|
| 375 |
usbmisc: usbmisc@53f80800 { |
| 376 |
#index-cells = <1>; |
| 377 |
compatible = "fsl,imx53-usbmisc"; |
| 378 |
reg = <0x53f80800 0x200>; |
| 379 |
clocks = <&clks IMX5_CLK_USBOH3_GATE>; |
| 380 |
}; |
| 381 |
|
| 382 |
gpio1: gpio@53f84000 { |
| 383 |
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; |
| 384 |
reg = <0x53f84000 0x4000>; |
| 385 |
interrupts = <50 51>; |
| 386 |
gpio-controller; |
| 387 |
#gpio-cells = <2>; |
| 388 |
interrupt-controller; |
| 389 |
#interrupt-cells = <2>; |
| 390 |
}; |
| 391 |
|
| 392 |
gpio2: gpio@53f88000 { |
| 393 |
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; |
| 394 |
reg = <0x53f88000 0x4000>; |
| 395 |
interrupts = <52 53>; |
| 396 |
gpio-controller; |
| 397 |
#gpio-cells = <2>; |
| 398 |
interrupt-controller; |
| 399 |
#interrupt-cells = <2>; |
| 400 |
}; |
| 401 |
|
| 402 |
gpio3: gpio@53f8c000 { |
| 403 |
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; |
| 404 |
reg = <0x53f8c000 0x4000>; |
| 405 |
interrupts = <54 55>; |
| 406 |
gpio-controller; |
| 407 |
#gpio-cells = <2>; |
| 408 |
interrupt-controller; |
| 409 |
#interrupt-cells = <2>; |
| 410 |
}; |
| 411 |
|
| 412 |
gpio4: gpio@53f90000 { |
| 413 |
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; |
| 414 |
reg = <0x53f90000 0x4000>; |
| 415 |
interrupts = <56 57>; |
| 416 |
gpio-controller; |
| 417 |
#gpio-cells = <2>; |
| 418 |
interrupt-controller; |
| 419 |
#interrupt-cells = <2>; |
| 420 |
}; |
| 421 |
|
| 422 |
kpp: kpp@53f94000 { |
| 423 |
compatible = "fsl,imx53-kpp", "fsl,imx21-kpp"; |
| 424 |
reg = <0x53f94000 0x4000>; |
| 425 |
interrupts = <60>; |
| 426 |
clocks = <&clks IMX5_CLK_DUMMY>; |
| 427 |
status = "disabled"; |
| 428 |
}; |
| 429 |
|
| 430 |
wdog1: watchdog@53f98000 { |
| 431 |
compatible = "fsl,imx53-wdt", "fsl,imx21-wdt"; |
| 432 |
reg = <0x53f98000 0x4000>; |
| 433 |
interrupts = <58>; |
| 434 |
clocks = <&clks IMX5_CLK_DUMMY>; |
| 435 |
}; |
| 436 |
|
| 437 |
wdog2: watchdog@53f9c000 { |
| 438 |
compatible = "fsl,imx53-wdt", "fsl,imx21-wdt"; |
| 439 |
reg = <0x53f9c000 0x4000>; |
| 440 |
interrupts = <59>; |
| 441 |
clocks = <&clks IMX5_CLK_DUMMY>; |
| 442 |
status = "disabled"; |
| 443 |
}; |
| 444 |
|
| 445 |
gpt: timer@53fa0000 { |
| 446 |
compatible = "fsl,imx53-gpt", "fsl,imx31-gpt"; |
| 447 |
reg = <0x53fa0000 0x4000>; |
| 448 |
interrupts = <39>; |
| 449 |
clocks = <&clks IMX5_CLK_GPT_IPG_GATE>, |
| 450 |
<&clks IMX5_CLK_GPT_HF_GATE>; |
| 451 |
clock-names = "ipg", "per"; |
| 452 |
}; |
| 453 |
|
| 454 |
srtc: rtc@53fa4000 { |
| 455 |
compatible = "fsl,imx53-rtc"; |
| 456 |
reg = <0x53fa4000 0x4000>; |
| 457 |
interrupts = <24>; |
| 458 |
clocks = <&clks IMX5_CLK_SRTC_GATE>; |
| 459 |
}; |
| 460 |
|
| 461 |
iomuxc: pinctrl@53fa8000 { |
| 462 |
compatible = "fsl,imx53-iomuxc"; |
| 463 |
reg = <0x53fa8000 0x4000>; |
| 464 |
}; |
| 465 |
|
| 466 |
gpr: iomuxc-gpr@53fa8000 { |
| 467 |
compatible = "fsl,imx53-iomuxc-gpr", "syscon"; |
| 468 |
reg = <0x53fa8000 0xc>; |
| 469 |
}; |
| 470 |
|
| 471 |
ldb: ldb@53fa8008 { |
| 472 |
#address-cells = <1>; |
| 473 |
#size-cells = <0>; |
| 474 |
compatible = "fsl,imx53-ldb"; |
| 475 |
reg = <0x53fa8008 0x4>; |
| 476 |
gpr = <&gpr>; |
| 477 |
clocks = <&clks IMX5_CLK_LDB_DI0_SEL>, |
| 478 |
<&clks IMX5_CLK_LDB_DI1_SEL>, |
| 479 |
<&clks IMX5_CLK_IPU_DI0_SEL>, |
| 480 |
<&clks IMX5_CLK_IPU_DI1_SEL>, |
| 481 |
<&clks IMX5_CLK_LDB_DI0_GATE>, |
| 482 |
<&clks IMX5_CLK_LDB_DI1_GATE>; |
| 483 |
clock-names = "di0_pll", "di1_pll", |
| 484 |
"di0_sel", "di1_sel", |
| 485 |
"di0", "di1"; |
| 486 |
status = "disabled"; |
| 487 |
|
| 488 |
lvds-channel@0 { |
| 489 |
#address-cells = <1>; |
| 490 |
#size-cells = <0>; |
| 491 |
reg = <0>; |
| 492 |
status = "disabled"; |
| 493 |
|
| 494 |
port@0 { |
| 495 |
reg = <0>; |
| 496 |
|
| 497 |
lvds0_in: endpoint { |
| 498 |
remote-endpoint = <&ipu_di0_lvds0>; |
| 499 |
}; |
| 500 |
}; |
| 501 |
|
| 502 |
port@2 { |
| 503 |
reg = <2>; |
| 504 |
}; |
| 505 |
}; |
| 506 |
|
| 507 |
lvds-channel@1 { |
| 508 |
#address-cells = <1>; |
| 509 |
#size-cells = <0>; |
| 510 |
reg = <1>; |
| 511 |
status = "disabled"; |
| 512 |
|
| 513 |
port@1 { |
| 514 |
reg = <1>; |
| 515 |
|
| 516 |
lvds1_in: endpoint { |
| 517 |
remote-endpoint = <&ipu_di1_lvds1>; |
| 518 |
}; |
| 519 |
}; |
| 520 |
|
| 521 |
port@2 { |
| 522 |
reg = <2>; |
| 523 |
}; |
| 524 |
}; |
| 525 |
}; |
| 526 |
|
| 527 |
pwm1: pwm@53fb4000 { |
| 528 |
#pwm-cells = <3>; |
| 529 |
compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; |
| 530 |
reg = <0x53fb4000 0x4000>; |
| 531 |
clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>, |
| 532 |
<&clks IMX5_CLK_PWM1_HF_GATE>; |
| 533 |
clock-names = "ipg", "per"; |
| 534 |
interrupts = <61>; |
| 535 |
}; |
| 536 |
|
| 537 |
pwm2: pwm@53fb8000 { |
| 538 |
#pwm-cells = <3>; |
| 539 |
compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; |
| 540 |
reg = <0x53fb8000 0x4000>; |
| 541 |
clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>, |
| 542 |
<&clks IMX5_CLK_PWM2_HF_GATE>; |
| 543 |
clock-names = "ipg", "per"; |
| 544 |
interrupts = <94>; |
| 545 |
}; |
| 546 |
|
| 547 |
uart1: serial@53fbc000 { |
| 548 |
compatible = "fsl,imx53-uart", "fsl,imx21-uart"; |
| 549 |
reg = <0x53fbc000 0x4000>; |
| 550 |
interrupts = <31>; |
| 551 |
clocks = <&clks IMX5_CLK_UART1_IPG_GATE>, |
| 552 |
<&clks IMX5_CLK_UART1_PER_GATE>; |
| 553 |
clock-names = "ipg", "per"; |
| 554 |
dmas = <&sdma 18 4 0>, <&sdma 19 4 0>; |
| 555 |
dma-names = "rx", "tx"; |
| 556 |
status = "disabled"; |
| 557 |
}; |
| 558 |
|
| 559 |
uart2: serial@53fc0000 { |
| 560 |
compatible = "fsl,imx53-uart", "fsl,imx21-uart"; |
| 561 |
reg = <0x53fc0000 0x4000>; |
| 562 |
interrupts = <32>; |
| 563 |
clocks = <&clks IMX5_CLK_UART2_IPG_GATE>, |
| 564 |
<&clks IMX5_CLK_UART2_PER_GATE>; |
| 565 |
clock-names = "ipg", "per"; |
| 566 |
dmas = <&sdma 12 4 0>, <&sdma 13 4 0>; |
| 567 |
dma-names = "rx", "tx"; |
| 568 |
status = "disabled"; |
| 569 |
}; |
| 570 |
|
| 571 |
can1: can@53fc8000 { |
| 572 |
compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan"; |
| 573 |
reg = <0x53fc8000 0x4000>; |
| 574 |
interrupts = <82>; |
| 575 |
clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, |
| 576 |
<&clks IMX5_CLK_CAN1_SERIAL_GATE>; |
| 577 |
clock-names = "ipg", "per"; |
| 578 |
status = "disabled"; |
| 579 |
}; |
| 580 |
|
| 581 |
can2: can@53fcc000 { |
| 582 |
compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan"; |
| 583 |
reg = <0x53fcc000 0x4000>; |
| 584 |
interrupts = <83>; |
| 585 |
clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>, |
| 586 |
<&clks IMX5_CLK_CAN2_SERIAL_GATE>; |
| 587 |
clock-names = "ipg", "per"; |
| 588 |
status = "disabled"; |
| 589 |
}; |
| 590 |
|
| 591 |
src: reset-controller@53fd0000 { |
| 592 |
compatible = "fsl,imx53-src", "fsl,imx51-src"; |
| 593 |
reg = <0x53fd0000 0x4000>; |
| 594 |
interrupts = <75>; |
| 595 |
#reset-cells = <1>; |
| 596 |
}; |
| 597 |
|
| 598 |
clks: ccm@53fd4000 { |
| 599 |
compatible = "fsl,imx53-ccm"; |
| 600 |
reg = <0x53fd4000 0x4000>; |
| 601 |
interrupts = <71>, <72>; |
| 602 |
#clock-cells = <1>; |
| 603 |
}; |
| 604 |
|
| 605 |
gpio5: gpio@53fdc000 { |
| 606 |
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; |
| 607 |
reg = <0x53fdc000 0x4000>; |
| 608 |
interrupts = <103 104>; |
| 609 |
gpio-controller; |
| 610 |
#gpio-cells = <2>; |
| 611 |
interrupt-controller; |
| 612 |
#interrupt-cells = <2>; |
| 613 |
}; |
| 614 |
|
| 615 |
gpio6: gpio@53fe0000 { |
| 616 |
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; |
| 617 |
reg = <0x53fe0000 0x4000>; |
| 618 |
interrupts = <105 106>; |
| 619 |
gpio-controller; |
| 620 |
#gpio-cells = <2>; |
| 621 |
interrupt-controller; |
| 622 |
#interrupt-cells = <2>; |
| 623 |
}; |
| 624 |
|
| 625 |
gpio7: gpio@53fe4000 { |
| 626 |
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; |
| 627 |
reg = <0x53fe4000 0x4000>; |
| 628 |
interrupts = <107 108>; |
| 629 |
gpio-controller; |
| 630 |
#gpio-cells = <2>; |
| 631 |
interrupt-controller; |
| 632 |
#interrupt-cells = <2>; |
| 633 |
}; |
| 634 |
|
| 635 |
i2c3: i2c@53fec000 { |
| 636 |
#address-cells = <1>; |
| 637 |
#size-cells = <0>; |
| 638 |
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c"; |
| 639 |
reg = <0x53fec000 0x4000>; |
| 640 |
interrupts = <64>; |
| 641 |
clocks = <&clks IMX5_CLK_I2C3_GATE>; |
| 642 |
status = "disabled"; |
| 643 |
}; |
| 644 |
|
| 645 |
uart4: serial@53ff0000 { |
| 646 |
compatible = "fsl,imx53-uart", "fsl,imx21-uart"; |
| 647 |
reg = <0x53ff0000 0x4000>; |
| 648 |
interrupts = <13>; |
| 649 |
clocks = <&clks IMX5_CLK_UART4_IPG_GATE>, |
| 650 |
<&clks IMX5_CLK_UART4_PER_GATE>; |
| 651 |
clock-names = "ipg", "per"; |
| 652 |
dmas = <&sdma 2 4 0>, <&sdma 3 4 0>; |
| 653 |
dma-names = "rx", "tx"; |
| 654 |
status = "disabled"; |
| 655 |
}; |
| 656 |
}; |
| 657 |
|
| 658 |
aips2: bus@60000000 { /* AIPS2 */ |
| 659 |
compatible = "fsl,aips-bus", "simple-bus"; |
| 660 |
#address-cells = <1>; |
| 661 |
#size-cells = <1>; |
| 662 |
reg = <0x60000000 0x10000000>; |
| 663 |
ranges; |
| 664 |
|
| 665 |
aipstz2: bridge@63f00000 { |
| 666 |
compatible = "fsl,imx53-aipstz"; |
| 667 |
reg = <0x63f00000 0x60>; |
| 668 |
}; |
| 669 |
|
| 670 |
iim: efuse@63f98000 { |
| 671 |
compatible = "fsl,imx53-iim"; |
| 672 |
reg = <0x63f98000 0x4000>; |
| 673 |
interrupts = <69>; |
| 674 |
clocks = <&clks IMX5_CLK_IIM_GATE>; |
| 675 |
}; |
| 676 |
|
| 677 |
uart5: serial@63f90000 { |
| 678 |
compatible = "fsl,imx53-uart", "fsl,imx21-uart"; |
| 679 |
reg = <0x63f90000 0x4000>; |
| 680 |
interrupts = <86>; |
| 681 |
clocks = <&clks IMX5_CLK_UART5_IPG_GATE>, |
| 682 |
<&clks IMX5_CLK_UART5_PER_GATE>; |
| 683 |
clock-names = "ipg", "per"; |
| 684 |
dmas = <&sdma 16 4 0>, <&sdma 17 4 0>; |
| 685 |
dma-names = "rx", "tx"; |
| 686 |
status = "disabled"; |
| 687 |
}; |
| 688 |
|
| 689 |
tigerp: tigerp@63fa0000 { |
| 690 |
compatible = "fsl,imx53-tigerp", "fsl,imx51-tigerp"; |
| 691 |
reg = <0x63fa0000 0x28>; |
| 692 |
}; |
| 693 |
|
| 694 |
owire: owire@63fa4000 { |
| 695 |
compatible = "fsl,imx53-owire", "fsl,imx21-owire"; |
| 696 |
reg = <0x63fa4000 0x4000>; |
| 697 |
clocks = <&clks IMX5_CLK_OWIRE_GATE>; |
| 698 |
status = "disabled"; |
| 699 |
}; |
| 700 |
|
| 701 |
ecspi2: spi@63fac000 { |
| 702 |
#address-cells = <1>; |
| 703 |
#size-cells = <0>; |
| 704 |
compatible = "fsl,imx53-ecspi"; |
| 705 |
reg = <0x63fac000 0x4000>; |
| 706 |
interrupts = <37>; |
| 707 |
clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>, |
| 708 |
<&clks IMX5_CLK_ECSPI2_PER_GATE>; |
| 709 |
clock-names = "ipg", "per"; |
| 710 |
status = "disabled"; |
| 711 |
}; |
| 712 |
|
| 713 |
sdma: dma-controller@63fb0000 { |
| 714 |
compatible = "fsl,imx53-sdma", "fsl,imx35-sdma"; |
| 715 |
reg = <0x63fb0000 0x4000>; |
| 716 |
interrupts = <6>; |
| 717 |
clocks = <&clks IMX5_CLK_SDMA_GATE>, |
| 718 |
<&clks IMX5_CLK_AHB>; |
| 719 |
clock-names = "ipg", "ahb"; |
| 720 |
#dma-cells = <3>; |
| 721 |
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; |
| 722 |
}; |
| 723 |
|
| 724 |
cspi: spi@63fc0000 { |
| 725 |
#address-cells = <1>; |
| 726 |
#size-cells = <0>; |
| 727 |
compatible = "fsl,imx53-cspi", "fsl,imx35-cspi"; |
| 728 |
reg = <0x63fc0000 0x4000>; |
| 729 |
interrupts = <38>; |
| 730 |
clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>, |
| 731 |
<&clks IMX5_CLK_CSPI_IPG_GATE>; |
| 732 |
clock-names = "ipg", "per"; |
| 733 |
status = "disabled"; |
| 734 |
}; |
| 735 |
|
| 736 |
i2c2: i2c@63fc4000 { |
| 737 |
#address-cells = <1>; |
| 738 |
#size-cells = <0>; |
| 739 |
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c"; |
| 740 |
reg = <0x63fc4000 0x4000>; |
| 741 |
interrupts = <63>; |
| 742 |
clocks = <&clks IMX5_CLK_I2C2_GATE>; |
| 743 |
status = "disabled"; |
| 744 |
}; |
| 745 |
|
| 746 |
i2c1: i2c@63fc8000 { |
| 747 |
#address-cells = <1>; |
| 748 |
#size-cells = <0>; |
| 749 |
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c"; |
| 750 |
reg = <0x63fc8000 0x4000>; |
| 751 |
interrupts = <62>; |
| 752 |
clocks = <&clks IMX5_CLK_I2C1_GATE>; |
| 753 |
status = "disabled"; |
| 754 |
}; |
| 755 |
|
| 756 |
ssi1: ssi@63fcc000 { |
| 757 |
#sound-dai-cells = <0>; |
| 758 |
compatible = "fsl,imx53-ssi", "fsl,imx51-ssi", |
| 759 |
"fsl,imx21-ssi"; |
| 760 |
reg = <0x63fcc000 0x4000>; |
| 761 |
interrupts = <29>; |
| 762 |
clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>, |
| 763 |
<&clks IMX5_CLK_SSI1_ROOT_GATE>; |
| 764 |
clock-names = "ipg", "baud"; |
| 765 |
dmas = <&sdma 28 0 0>, |
| 766 |
<&sdma 29 0 0>; |
| 767 |
dma-names = "rx", "tx"; |
| 768 |
fsl,fifo-depth = <15>; |
| 769 |
status = "disabled"; |
| 770 |
}; |
| 771 |
|
| 772 |
audmux: audmux@63fd0000 { |
| 773 |
compatible = "fsl,imx53-audmux", "fsl,imx31-audmux"; |
| 774 |
reg = <0x63fd0000 0x4000>; |
| 775 |
status = "disabled"; |
| 776 |
}; |
| 777 |
|
| 778 |
nfc: nand-controller@63fdb000 { |
| 779 |
compatible = "fsl,imx53-nand"; |
| 780 |
reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>; |
| 781 |
interrupts = <8>; |
| 782 |
clocks = <&clks IMX5_CLK_NFC_GATE>; |
| 783 |
status = "disabled"; |
| 784 |
}; |
| 785 |
|
| 786 |
ssi3: ssi@63fe8000 { |
| 787 |
#sound-dai-cells = <0>; |
| 788 |
compatible = "fsl,imx53-ssi", "fsl,imx51-ssi", |
| 789 |
"fsl,imx21-ssi"; |
| 790 |
reg = <0x63fe8000 0x4000>; |
| 791 |
interrupts = <96>; |
| 792 |
clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>, |
| 793 |
<&clks IMX5_CLK_SSI3_ROOT_GATE>; |
| 794 |
clock-names = "ipg", "baud"; |
| 795 |
dmas = <&sdma 46 0 0>, |
| 796 |
<&sdma 47 0 0>; |
| 797 |
dma-names = "rx", "tx"; |
| 798 |
fsl,fifo-depth = <15>; |
| 799 |
status = "disabled"; |
| 800 |
}; |
| 801 |
|
| 802 |
fec: ethernet@63fec000 { |
| 803 |
compatible = "fsl,imx53-fec", "fsl,imx25-fec"; |
| 804 |
reg = <0x63fec000 0x4000>; |
| 805 |
interrupts = <87>; |
| 806 |
clocks = <&clks IMX5_CLK_FEC_GATE>, |
| 807 |
<&clks IMX5_CLK_FEC_GATE>, |
| 808 |
<&clks IMX5_CLK_FEC_GATE>; |
| 809 |
clock-names = "ipg", "ahb", "ptp"; |
| 810 |
status = "disabled"; |
| 811 |
}; |
| 812 |
|
| 813 |
tve: tve@63ff0000 { |
| 814 |
compatible = "fsl,imx53-tve"; |
| 815 |
reg = <0x63ff0000 0x1000>; |
| 816 |
interrupts = <92>; |
| 817 |
clocks = <&clks IMX5_CLK_TVE_GATE>, |
| 818 |
<&clks IMX5_CLK_IPU_DI1_SEL>; |
| 819 |
clock-names = "tve", "di_sel"; |
| 820 |
status = "disabled"; |
| 821 |
|
| 822 |
port { |
| 823 |
tve_in: endpoint { |
| 824 |
remote-endpoint = <&ipu_di1_tve>; |
| 825 |
}; |
| 826 |
}; |
| 827 |
}; |
| 828 |
|
| 829 |
vpu: vpu@63ff4000 { |
| 830 |
compatible = "fsl,imx53-vpu", "cnm,coda7541"; |
| 831 |
reg = <0x63ff4000 0x1000>; |
| 832 |
interrupts = <9>; |
| 833 |
clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>, |
| 834 |
<&clks IMX5_CLK_VPU_GATE>; |
| 835 |
clock-names = "per", "ahb"; |
| 836 |
resets = <&src 1>; |
| 837 |
iram = <&ocram>; |
| 838 |
}; |
| 839 |
|
| 840 |
sahara: crypto@63ff8000 { |
| 841 |
compatible = "fsl,imx53-sahara"; |
| 842 |
reg = <0x63ff8000 0x4000>; |
| 843 |
interrupts = <19 20>; |
| 844 |
clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>, |
| 845 |
<&clks IMX5_CLK_SAHARA_IPG_GATE>; |
| 846 |
clock-names = "ipg", "ahb"; |
| 847 |
}; |
| 848 |
}; |
| 849 |
|
| 850 |
ocram: sram@f8000000 { |
| 851 |
compatible = "mmio-sram"; |
| 852 |
reg = <0xf8000000 0x20000>; |
| 853 |
ranges = <0 0xf8000000 0x20000>; |
| 854 |
#address-cells = <1>; |
| 855 |
#size-cells = <1>; |
| 856 |
clocks = <&clks IMX5_CLK_OCRAM>; |
| 857 |
}; |
| 858 |
}; |
| 859 |
}; |