| 1 |
/* |
| 2 |
* Support for CompuLab CL-SOM-iMX7 System-on-Module |
| 3 |
* |
| 4 |
* Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/ |
| 5 |
* Author: Ilya Ledvich <[email protected]> |
| 6 |
* |
| 7 |
* This file is dual-licensed: you can use it either under the terms |
| 8 |
* of the GPL or the X11 license, at your option. Note that this dual |
| 9 |
* licensing only applies to this file, and not this project as a |
| 10 |
* whole. |
| 11 |
*/ |
| 12 |
|
| 13 |
/dts-v1/; |
| 14 |
|
| 15 |
#include "imx7d.dtsi" |
| 16 |
|
| 17 |
/ { |
| 18 |
model = "CompuLab CL-SOM-iMX7"; |
| 19 |
compatible = "compulab,cl-som-imx7", "fsl,imx7d"; |
| 20 |
|
| 21 |
memory@80000000 { |
| 22 |
device_type = "memory"; |
| 23 |
reg = <0x80000000 0x10000000>; /* 256 MB - minimal configuration */ |
| 24 |
}; |
| 25 |
|
| 26 |
reg_usb_otg1_vbus: regulator-vbus { |
| 27 |
compatible = "regulator-fixed"; |
| 28 |
regulator-name = "usb_otg1_vbus"; |
| 29 |
regulator-min-microvolt = <5000000>; |
| 30 |
regulator-max-microvolt = <5000000>; |
| 31 |
gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; |
| 32 |
enable-active-high; |
| 33 |
}; |
| 34 |
}; |
| 35 |
|
| 36 |
&cpu0 { |
| 37 |
cpu-supply = <&sw1a_reg>; |
| 38 |
}; |
| 39 |
|
| 40 |
&cpu1 { |
| 41 |
cpu-supply = <&sw1a_reg>; |
| 42 |
}; |
| 43 |
|
| 44 |
&fec1 { |
| 45 |
pinctrl-names = "default"; |
| 46 |
pinctrl-0 = <&pinctrl_enet1>; |
| 47 |
assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, |
| 48 |
<&clks IMX7D_ENET1_TIME_ROOT_CLK>; |
| 49 |
assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; |
| 50 |
assigned-clock-rates = <0>, <100000000>; |
| 51 |
phy-mode = "rgmii-id"; |
| 52 |
phy-handle = <ðphy0>; |
| 53 |
fsl,magic-packet; |
| 54 |
status = "okay"; |
| 55 |
|
| 56 |
mdio { |
| 57 |
#address-cells = <1>; |
| 58 |
#size-cells = <0>; |
| 59 |
|
| 60 |
ethphy0: ethernet-phy@0 { |
| 61 |
compatible = "ethernet-phy-ieee802.3-c22"; |
| 62 |
reg = <0>; |
| 63 |
}; |
| 64 |
|
| 65 |
ethphy1: ethernet-phy@1 { |
| 66 |
compatible = "ethernet-phy-ieee802.3-c22"; |
| 67 |
reg = <1>; |
| 68 |
}; |
| 69 |
}; |
| 70 |
}; |
| 71 |
|
| 72 |
&fec2 { |
| 73 |
pinctrl-names = "default"; |
| 74 |
pinctrl-0 = <&pinctrl_enet2>; |
| 75 |
assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>, |
| 76 |
<&clks IMX7D_ENET2_TIME_ROOT_CLK>; |
| 77 |
assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; |
| 78 |
assigned-clock-rates = <0>, <100000000>; |
| 79 |
phy-mode = "rgmii-id"; |
| 80 |
phy-handle = <ðphy1>; |
| 81 |
fsl,magic-packet; |
| 82 |
status = "okay"; |
| 83 |
}; |
| 84 |
|
| 85 |
&i2c2 { |
| 86 |
pinctrl-names = "default"; |
| 87 |
pinctrl-0 = <&pinctrl_i2c2>; |
| 88 |
status = "okay"; |
| 89 |
|
| 90 |
pmic: pmic@8 { |
| 91 |
compatible = "fsl,pfuze3000"; |
| 92 |
reg = <0x8>; |
| 93 |
|
| 94 |
regulators { |
| 95 |
sw1a_reg: sw1a { |
| 96 |
regulator-min-microvolt = <700000>; |
| 97 |
regulator-max-microvolt = <3300000>; |
| 98 |
regulator-boot-on; |
| 99 |
regulator-always-on; |
| 100 |
regulator-ramp-delay = <6250>; |
| 101 |
}; |
| 102 |
|
| 103 |
/* use sw1c_reg to align with pfuze100/pfuze200 */ |
| 104 |
sw1c_reg: sw1b { |
| 105 |
regulator-min-microvolt = <700000>; |
| 106 |
regulator-max-microvolt = <1475000>; |
| 107 |
regulator-boot-on; |
| 108 |
regulator-always-on; |
| 109 |
regulator-ramp-delay = <6250>; |
| 110 |
}; |
| 111 |
|
| 112 |
sw2_reg: sw2 { |
| 113 |
regulator-min-microvolt = <1500000>; |
| 114 |
regulator-max-microvolt = <1850000>; |
| 115 |
regulator-boot-on; |
| 116 |
regulator-always-on; |
| 117 |
}; |
| 118 |
|
| 119 |
sw3a_reg: sw3 { |
| 120 |
regulator-min-microvolt = <900000>; |
| 121 |
regulator-max-microvolt = <1650000>; |
| 122 |
regulator-boot-on; |
| 123 |
regulator-always-on; |
| 124 |
}; |
| 125 |
|
| 126 |
swbst_reg: swbst { |
| 127 |
regulator-min-microvolt = <5000000>; |
| 128 |
regulator-max-microvolt = <5150000>; |
| 129 |
}; |
| 130 |
|
| 131 |
snvs_reg: vsnvs { |
| 132 |
regulator-min-microvolt = <1000000>; |
| 133 |
regulator-max-microvolt = <3000000>; |
| 134 |
regulator-boot-on; |
| 135 |
regulator-always-on; |
| 136 |
}; |
| 137 |
|
| 138 |
vref_reg: vrefddr { |
| 139 |
regulator-boot-on; |
| 140 |
regulator-always-on; |
| 141 |
}; |
| 142 |
|
| 143 |
vgen1_reg: vldo1 { |
| 144 |
regulator-min-microvolt = <1800000>; |
| 145 |
regulator-max-microvolt = <3300000>; |
| 146 |
regulator-always-on; |
| 147 |
}; |
| 148 |
|
| 149 |
vgen2_reg: vldo2 { |
| 150 |
regulator-min-microvolt = <800000>; |
| 151 |
regulator-max-microvolt = <1550000>; |
| 152 |
}; |
| 153 |
|
| 154 |
vgen3_reg: vccsd { |
| 155 |
regulator-min-microvolt = <2850000>; |
| 156 |
regulator-max-microvolt = <3300000>; |
| 157 |
regulator-always-on; |
| 158 |
}; |
| 159 |
|
| 160 |
vgen4_reg: v33 { |
| 161 |
regulator-min-microvolt = <2850000>; |
| 162 |
regulator-max-microvolt = <3300000>; |
| 163 |
regulator-always-on; |
| 164 |
}; |
| 165 |
|
| 166 |
vgen5_reg: vldo3 { |
| 167 |
regulator-min-microvolt = <1800000>; |
| 168 |
regulator-max-microvolt = <3300000>; |
| 169 |
regulator-always-on; |
| 170 |
}; |
| 171 |
|
| 172 |
vgen6_reg: vldo4 { |
| 173 |
regulator-min-microvolt = <1800000>; |
| 174 |
regulator-max-microvolt = <3300000>; |
| 175 |
regulator-always-on; |
| 176 |
}; |
| 177 |
}; |
| 178 |
}; |
| 179 |
|
| 180 |
pca9555: pca9555@20 { |
| 181 |
compatible = "nxp,pca9555"; |
| 182 |
gpio-controller; |
| 183 |
#gpio-cells = <2>; |
| 184 |
reg = <0x20>; |
| 185 |
}; |
| 186 |
|
| 187 |
eeprom@50 { |
| 188 |
compatible = "atmel,24c08"; |
| 189 |
reg = <0x50>; |
| 190 |
pagesize = <16>; |
| 191 |
}; |
| 192 |
}; |
| 193 |
|
| 194 |
&uart1 { |
| 195 |
pinctrl-names = "default"; |
| 196 |
pinctrl-0 = <&pinctrl_uart1>; |
| 197 |
assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>; |
| 198 |
assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; |
| 199 |
status = "okay"; |
| 200 |
}; |
| 201 |
|
| 202 |
&usbotg1 { |
| 203 |
pinctrl-names = "default"; |
| 204 |
pinctrl-0 = <&pinctrl_usbotg1>; |
| 205 |
vbus-supply = <®_usb_otg1_vbus>; |
| 206 |
status = "okay"; |
| 207 |
}; |
| 208 |
|
| 209 |
&usdhc3 { |
| 210 |
pinctrl-names = "default"; |
| 211 |
pinctrl-0 = <&pinctrl_usdhc3>; |
| 212 |
assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; |
| 213 |
assigned-clock-rates = <400000000>; |
| 214 |
bus-width = <8>; |
| 215 |
fsl,tuning-step = <2>; |
| 216 |
non-removable; |
| 217 |
status = "okay"; |
| 218 |
}; |
| 219 |
|
| 220 |
&iomuxc { |
| 221 |
pinctrl_enet1: enet1grp { |
| 222 |
fsl,pins = < |
| 223 |
MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x30 |
| 224 |
MX7D_PAD_SD2_WP__ENET1_MDC 0x30 |
| 225 |
MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x11 |
| 226 |
MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x11 |
| 227 |
MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x11 |
| 228 |
MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x11 |
| 229 |
MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x11 |
| 230 |
MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x11 |
| 231 |
MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x11 |
| 232 |
MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x11 |
| 233 |
MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x11 |
| 234 |
MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x11 |
| 235 |
MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x11 |
| 236 |
MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x11 |
| 237 |
>; |
| 238 |
}; |
| 239 |
|
| 240 |
pinctrl_enet2: enet2grp { |
| 241 |
fsl,pins = < |
| 242 |
MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x11 |
| 243 |
MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x11 |
| 244 |
MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x11 |
| 245 |
MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x11 |
| 246 |
MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x11 |
| 247 |
MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x11 |
| 248 |
MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x11 |
| 249 |
MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x11 |
| 250 |
MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x11 |
| 251 |
MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x11 |
| 252 |
MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x11 |
| 253 |
MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x11 |
| 254 |
>; |
| 255 |
}; |
| 256 |
|
| 257 |
pinctrl_i2c2: i2c2grp { |
| 258 |
fsl,pins = < |
| 259 |
MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f |
| 260 |
MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f |
| 261 |
>; |
| 262 |
}; |
| 263 |
|
| 264 |
pinctrl_uart1: uart1grp { |
| 265 |
fsl,pins = < |
| 266 |
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 |
| 267 |
MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79 |
| 268 |
>; |
| 269 |
}; |
| 270 |
|
| 271 |
pinctrl_usdhc3: usdhc3grp { |
| 272 |
fsl,pins = < |
| 273 |
MX7D_PAD_SD3_CMD__SD3_CMD 0x59 |
| 274 |
MX7D_PAD_SD3_CLK__SD3_CLK 0x19 |
| 275 |
MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 |
| 276 |
MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 |
| 277 |
MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 |
| 278 |
MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 |
| 279 |
MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 |
| 280 |
MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 |
| 281 |
MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 |
| 282 |
MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 |
| 283 |
MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19 |
| 284 |
>; |
| 285 |
}; |
| 286 |
}; |
| 287 |
|
| 288 |
&iomuxc_lpsr { |
| 289 |
pinctrl_usbotg1: usbotg1grp { |
| 290 |
fsl,pins = < |
| 291 |
MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x14 /* OTG PWREN */ |
| 292 |
>; |
| 293 |
}; |
| 294 |
}; |