| 1 |
/* |
| 2 |
* Copyright 2013 CompuLab Ltd. |
| 3 |
* |
| 4 |
* Author: Valentin Raevsky <[email protected]> |
| 5 |
* |
| 6 |
* This file is dual-licensed: you can use it either under the terms |
| 7 |
* of the GPL or the X11 license, at your option. Note that this dual |
| 8 |
* licensing only applies to this file, and not this project as a |
| 9 |
* whole. |
| 10 |
* |
| 11 |
* a) This file is free software; you can redistribute it and/or |
| 12 |
* modify it under the terms of the GNU General Public License |
| 13 |
* version 2 as published by the Free Software Foundation. |
| 14 |
* |
| 15 |
* This file is distributed in the hope that it will be useful, |
| 16 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 17 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 18 |
* GNU General Public License for more details. |
| 19 |
* |
| 20 |
* Or, alternatively, |
| 21 |
* |
| 22 |
* b) Permission is hereby granted, free of charge, to any person |
| 23 |
* obtaining a copy of this software and associated documentation |
| 24 |
* files (the "Software"), to deal in the Software without |
| 25 |
* restriction, including without limitation the rights to use, |
| 26 |
* copy, modify, merge, publish, distribute, sublicense, and/or |
| 27 |
* sell copies of the Software, and to permit persons to whom the |
| 28 |
* Software is furnished to do so, subject to the following |
| 29 |
* conditions: |
| 30 |
* |
| 31 |
* The above copyright notice and this permission notice shall be |
| 32 |
* included in all copies or substantial portions of the Software. |
| 33 |
* |
| 34 |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 35 |
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| 36 |
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 37 |
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| 38 |
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| 39 |
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| 40 |
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| 41 |
* OTHER DEALINGS IN THE SOFTWARE. |
| 42 |
*/ |
| 43 |
|
| 44 |
/dts-v1/; |
| 45 |
#include <dt-bindings/gpio/gpio.h> |
| 46 |
#include <dt-bindings/sound/fsl-imx-audmux.h> |
| 47 |
#include "imx6q.dtsi" |
| 48 |
|
| 49 |
/ { |
| 50 |
model = "CompuLab CM-FX6"; |
| 51 |
compatible = "compulab,cm-fx6", "fsl,imx6q"; |
| 52 |
|
| 53 |
memory@10000000 { |
| 54 |
device_type = "memory"; |
| 55 |
reg = <0x10000000 0x80000000>; |
| 56 |
}; |
| 57 |
|
| 58 |
leds { |
| 59 |
compatible = "gpio-leds"; |
| 60 |
|
| 61 |
heartbeat-led { |
| 62 |
label = "Heartbeat"; |
| 63 |
gpios = <&gpio2 31 0>; |
| 64 |
linux,default-trigger = "heartbeat"; |
| 65 |
}; |
| 66 |
}; |
| 67 |
|
| 68 |
awnh387_pwrseq: pwrseq { |
| 69 |
pinctrl-names = "default"; |
| 70 |
pinctrl-0 = <&pinctrl_pwrseq>; |
| 71 |
compatible = "mmc-pwrseq-sd8787"; |
| 72 |
powerdown-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>; |
| 73 |
reset-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; |
| 74 |
}; |
| 75 |
|
| 76 |
reg_pcie_power_on_gpio: regulator-pcie-power-on { |
| 77 |
compatible = "regulator-fixed"; |
| 78 |
regulator-name = "regulator-pcie-power-on-gpio"; |
| 79 |
regulator-min-microvolt = <3300000>; |
| 80 |
regulator-max-microvolt = <3300000>; |
| 81 |
gpio = <&gpio2 24 GPIO_ACTIVE_LOW>; |
| 82 |
}; |
| 83 |
|
| 84 |
reg_usb_h1_vbus: usb_h1_vbus { |
| 85 |
compatible = "regulator-fixed"; |
| 86 |
regulator-name = "usb_h1_vbus"; |
| 87 |
regulator-min-microvolt = <5000000>; |
| 88 |
regulator-max-microvolt = <5000000>; |
| 89 |
gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>; |
| 90 |
enable-active-high; |
| 91 |
}; |
| 92 |
|
| 93 |
reg_usb_otg_vbus: usb_otg_vbus { |
| 94 |
compatible = "regulator-fixed"; |
| 95 |
regulator-name = "usb_otg_vbus"; |
| 96 |
regulator-min-microvolt = <5000000>; |
| 97 |
regulator-max-microvolt = <5000000>; |
| 98 |
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; |
| 99 |
enable-active-high; |
| 100 |
}; |
| 101 |
|
| 102 |
avdd_reg: regulator-avdd { |
| 103 |
compatible = "regulator-fixed"; |
| 104 |
regulator-name = "avdd"; |
| 105 |
regulator-min-microvolt = <1800000>; |
| 106 |
regulator-max-microvolt = <1800000>; |
| 107 |
}; |
| 108 |
|
| 109 |
hpvdd_reg: regulator-hpvdd { |
| 110 |
compatible = "regulator-fixed"; |
| 111 |
regulator-name = "hpvdd"; |
| 112 |
regulator-min-microvolt = <1800000>; |
| 113 |
regulator-max-microvolt = <1800000>; |
| 114 |
}; |
| 115 |
|
| 116 |
dcvdd_reg: regulator-dcvdd { |
| 117 |
compatible = "regulator-fixed"; |
| 118 |
regulator-name = "dcvdd"; |
| 119 |
regulator-min-microvolt = <3300000>; |
| 120 |
regulator-max-microvolt = <3300000>; |
| 121 |
}; |
| 122 |
|
| 123 |
dbvdd_reg: regulator-dbvdd { |
| 124 |
compatible = "regulator-fixed"; |
| 125 |
regulator-name = "dbvdd"; |
| 126 |
regulator-min-microvolt = <3300000>; |
| 127 |
regulator-max-microvolt = <3300000>; |
| 128 |
}; |
| 129 |
|
| 130 |
sound-analog { |
| 131 |
compatible = "simple-audio-card"; |
| 132 |
simple-audio-card,name = "On-board analog audio"; |
| 133 |
simple-audio-card,widgets = |
| 134 |
"Headphone", "Headphone Jack", |
| 135 |
"Line", "Line Out", |
| 136 |
"Microphone", "Mic Jack", |
| 137 |
"Line", "Line In"; |
| 138 |
simple-audio-card,routing = |
| 139 |
"Headphone Jack", "RHPOUT", |
| 140 |
"Headphone Jack", "LHPOUT", |
| 141 |
"MICIN", "Mic Bias", |
| 142 |
"Mic Bias", "Mic Jack"; |
| 143 |
simple-audio-card,format = "i2s"; |
| 144 |
simple-audio-card,bitclock-master = <&sound_master>; |
| 145 |
simple-audio-card,frame-master = <&sound_master>; |
| 146 |
simple-audio-card,bitclock-inversion; |
| 147 |
|
| 148 |
sound_master: simple-audio-card,cpu { |
| 149 |
sound-dai = <&ssi2>; |
| 150 |
system-clock-frequency = <2822400>; |
| 151 |
}; |
| 152 |
|
| 153 |
simple-audio-card,codec { |
| 154 |
sound-dai = <&wm8731>; |
| 155 |
}; |
| 156 |
}; |
| 157 |
|
| 158 |
spdif_out: spdif-out { |
| 159 |
compatible = "linux,spdif-dit"; |
| 160 |
#sound-dai-cells = <0>; |
| 161 |
}; |
| 162 |
|
| 163 |
spdif_in: spdif-in { |
| 164 |
compatible = "linux,spdif-dir"; |
| 165 |
#sound-dai-cells = <0>; |
| 166 |
}; |
| 167 |
|
| 168 |
sound-spdif { |
| 169 |
compatible = "fsl,imx-audio-spdif"; |
| 170 |
model = "imx-spdif"; |
| 171 |
audio-cpu = <&spdif>; |
| 172 |
audio-codec = <&spdif_out>, <&spdif_in>; |
| 173 |
}; |
| 174 |
}; |
| 175 |
|
| 176 |
&audmux { |
| 177 |
pinctrl-names = "default"; |
| 178 |
pinctrl-0 = <&pinctrl_audmux>; |
| 179 |
status = "okay"; |
| 180 |
|
| 181 |
mux-ssi2 { |
| 182 |
fsl,audmux-port = <1>; |
| 183 |
fsl,port-config = < |
| 184 |
(IMX_AUDMUX_V2_PTCR_RCLKDIR | |
| 185 |
IMX_AUDMUX_V2_PTCR_RCSEL(3 | 0x8) | |
| 186 |
IMX_AUDMUX_V2_PTCR_TCLKDIR | |
| 187 |
IMX_AUDMUX_V2_PTCR_TCSEL(3)) |
| 188 |
IMX_AUDMUX_V2_PDCR_RXDSEL(3) |
| 189 |
>; |
| 190 |
}; |
| 191 |
|
| 192 |
mux-audmux4 { |
| 193 |
fsl,audmux-port = <3>; |
| 194 |
fsl,port-config = < |
| 195 |
(IMX_AUDMUX_V2_PTCR_TFSDIR | |
| 196 |
IMX_AUDMUX_V2_PTCR_TFSEL(1) | |
| 197 |
IMX_AUDMUX_V2_PTCR_RCLKDIR | |
| 198 |
IMX_AUDMUX_V2_PTCR_RCSEL(1 | 0x8) | |
| 199 |
IMX_AUDMUX_V2_PTCR_TCLKDIR | |
| 200 |
IMX_AUDMUX_V2_PTCR_TCSEL(1)) |
| 201 |
IMX_AUDMUX_V2_PDCR_RXDSEL(1) |
| 202 |
>; |
| 203 |
}; |
| 204 |
}; |
| 205 |
|
| 206 |
&cpu0 { |
| 207 |
/* |
| 208 |
* Although the imx6q fuse indicates that 1.2GHz operation is possible, |
| 209 |
* the module behaves unstable at this frequency. Hence, remove the |
| 210 |
* 1.2GHz operation point here. |
| 211 |
*/ |
| 212 |
operating-points = < |
| 213 |
/* kHz uV */ |
| 214 |
996000 1250000 |
| 215 |
852000 1250000 |
| 216 |
792000 1175000 |
| 217 |
396000 975000 |
| 218 |
>; |
| 219 |
fsl,soc-operating-points = < |
| 220 |
/* ARM kHz SOC-PU uV */ |
| 221 |
996000 1250000 |
| 222 |
852000 1250000 |
| 223 |
792000 1175000 |
| 224 |
396000 1175000 |
| 225 |
>; |
| 226 |
}; |
| 227 |
|
| 228 |
&cpu1 { |
| 229 |
/* |
| 230 |
* Although the imx6q fuse indicates that 1.2GHz operation is possible, |
| 231 |
* the module behaves unstable at this frequency. Hence, remove the |
| 232 |
* 1.2GHz operation point here. |
| 233 |
*/ |
| 234 |
operating-points = < |
| 235 |
/* kHz uV */ |
| 236 |
996000 1250000 |
| 237 |
852000 1250000 |
| 238 |
792000 1175000 |
| 239 |
396000 975000 |
| 240 |
>; |
| 241 |
fsl,soc-operating-points = < |
| 242 |
/* ARM kHz SOC-PU uV */ |
| 243 |
996000 1250000 |
| 244 |
852000 1250000 |
| 245 |
792000 1175000 |
| 246 |
396000 1175000 |
| 247 |
>; |
| 248 |
}; |
| 249 |
|
| 250 |
&cpu2 { |
| 251 |
/* |
| 252 |
* Although the imx6q fuse indicates that 1.2GHz operation is possible, |
| 253 |
* the module behaves unstable at this frequency. Hence, remove the |
| 254 |
* 1.2GHz operation point here. |
| 255 |
*/ |
| 256 |
operating-points = < |
| 257 |
/* kHz uV */ |
| 258 |
996000 1250000 |
| 259 |
852000 1250000 |
| 260 |
792000 1175000 |
| 261 |
396000 975000 |
| 262 |
>; |
| 263 |
fsl,soc-operating-points = < |
| 264 |
/* ARM kHz SOC-PU uV */ |
| 265 |
996000 1250000 |
| 266 |
852000 1250000 |
| 267 |
792000 1175000 |
| 268 |
396000 1175000 |
| 269 |
>; |
| 270 |
}; |
| 271 |
|
| 272 |
&cpu3 { |
| 273 |
/* |
| 274 |
* Although the imx6q fuse indicates that 1.2GHz operation is possible, |
| 275 |
* the module behaves unstable at this frequency. Hence, remove the |
| 276 |
* 1.2GHz operation point here. |
| 277 |
*/ |
| 278 |
operating-points = < |
| 279 |
/* kHz uV */ |
| 280 |
996000 1250000 |
| 281 |
852000 1250000 |
| 282 |
792000 1175000 |
| 283 |
396000 975000 |
| 284 |
>; |
| 285 |
fsl,soc-operating-points = < |
| 286 |
/* ARM kHz SOC-PU uV */ |
| 287 |
996000 1250000 |
| 288 |
852000 1250000 |
| 289 |
792000 1175000 |
| 290 |
396000 1175000 |
| 291 |
>; |
| 292 |
}; |
| 293 |
|
| 294 |
&ecspi1 { |
| 295 |
cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>; |
| 296 |
pinctrl-names = "default"; |
| 297 |
pinctrl-0 = <&pinctrl_ecspi1>; |
| 298 |
status = "okay"; |
| 299 |
|
| 300 |
flash@0 { |
| 301 |
#address-cells = <1>; |
| 302 |
#size-cells = <1>; |
| 303 |
compatible = "jedec,spi-nor"; |
| 304 |
spi-max-frequency = <20000000>; |
| 305 |
reg = <0>; |
| 306 |
}; |
| 307 |
}; |
| 308 |
|
| 309 |
&fec { |
| 310 |
pinctrl-names = "default"; |
| 311 |
pinctrl-0 = <&pinctrl_enet>; |
| 312 |
phy-mode = "rgmii"; |
| 313 |
status = "okay"; |
| 314 |
}; |
| 315 |
|
| 316 |
&gpmi { |
| 317 |
pinctrl-names = "default"; |
| 318 |
pinctrl-0 = <&pinctrl_gpmi_nand>; |
| 319 |
status = "okay"; |
| 320 |
}; |
| 321 |
|
| 322 |
&i2c3 { |
| 323 |
pinctrl-names = "default"; |
| 324 |
pinctrl-0 = <&pinctrl_i2c3>; |
| 325 |
status = "okay"; |
| 326 |
clock-frequency = <100000>; |
| 327 |
|
| 328 |
eeprom@50 { |
| 329 |
compatible = "atmel,24c02"; |
| 330 |
reg = <0x50>; |
| 331 |
pagesize = <16>; |
| 332 |
}; |
| 333 |
|
| 334 |
wm8731: codec@1a { |
| 335 |
#sound-dai-cells = <0>; |
| 336 |
compatible = "wlf,wm8731"; |
| 337 |
reg = <0x1a>; |
| 338 |
AVDD-supply = <&avdd_reg>; |
| 339 |
HPVDD-supply = <&hpvdd_reg>; |
| 340 |
DCVDD-supply = <&dcvdd_reg>; |
| 341 |
DBVDD-supply = <&dbvdd_reg>; |
| 342 |
}; |
| 343 |
}; |
| 344 |
|
| 345 |
&iomuxc { |
| 346 |
pinctrl_audmux: audmuxgrp { |
| 347 |
fsl,pins = < |
| 348 |
MX6QDL_PAD_SD2_CMD__AUD4_RXC 0x17059 |
| 349 |
MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x17059 |
| 350 |
MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x17059 |
| 351 |
MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x17059 |
| 352 |
MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x17059 |
| 353 |
>; |
| 354 |
}; |
| 355 |
|
| 356 |
pinctrl_ecspi1: ecspi1grp { |
| 357 |
fsl,pins = < |
| 358 |
MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 |
| 359 |
MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 |
| 360 |
MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 |
| 361 |
MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x100b1 |
| 362 |
MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x100b1 |
| 363 |
>; |
| 364 |
}; |
| 365 |
|
| 366 |
pinctrl_enet: enetgrp { |
| 367 |
fsl,pins = < |
| 368 |
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 |
| 369 |
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 |
| 370 |
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 |
| 371 |
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 |
| 372 |
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 |
| 373 |
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 |
| 374 |
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 |
| 375 |
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 |
| 376 |
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 |
| 377 |
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 |
| 378 |
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 |
| 379 |
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 |
| 380 |
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 |
| 381 |
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 |
| 382 |
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 |
| 383 |
>; |
| 384 |
}; |
| 385 |
|
| 386 |
pinctrl_gpmi_nand: gpminandgrp { |
| 387 |
fsl,pins = < |
| 388 |
MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 |
| 389 |
MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 |
| 390 |
MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 |
| 391 |
MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 |
| 392 |
MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 |
| 393 |
MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 |
| 394 |
MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 |
| 395 |
MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 |
| 396 |
MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 |
| 397 |
MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 |
| 398 |
MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 |
| 399 |
MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 |
| 400 |
MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 |
| 401 |
MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 |
| 402 |
MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 |
| 403 |
MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 |
| 404 |
MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 |
| 405 |
>; |
| 406 |
}; |
| 407 |
|
| 408 |
pinctrl_i2c3: i2c3grp { |
| 409 |
fsl,pins = < |
| 410 |
MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 |
| 411 |
MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 |
| 412 |
>; |
| 413 |
}; |
| 414 |
|
| 415 |
pinctrl_pcie: pciegrp { |
| 416 |
fsl,pins = < |
| 417 |
MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 |
| 418 |
MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b1 |
| 419 |
>; |
| 420 |
}; |
| 421 |
|
| 422 |
pinctrl_pwrseq: pwrseqgrp { |
| 423 |
fsl,pins = < |
| 424 |
MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 |
| 425 |
MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 |
| 426 |
>; |
| 427 |
}; |
| 428 |
|
| 429 |
pinctrl_spdif: spdifgrp { |
| 430 |
fsl,pins = < |
| 431 |
MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0 |
| 432 |
MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0 |
| 433 |
>; |
| 434 |
}; |
| 435 |
|
| 436 |
pinctrl_uart4: uart4grp { |
| 437 |
fsl,pins = < |
| 438 |
MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 |
| 439 |
MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 |
| 440 |
>; |
| 441 |
}; |
| 442 |
|
| 443 |
pinctrl_usbh1: usbh1grp { |
| 444 |
fsl,pins = < |
| 445 |
MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b0b1 |
| 446 |
>; |
| 447 |
}; |
| 448 |
|
| 449 |
pinctrl_usbotg: usbotggrp { |
| 450 |
fsl,pins = < |
| 451 |
MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 |
| 452 |
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x130b0 |
| 453 |
>; |
| 454 |
}; |
| 455 |
|
| 456 |
pinctrl_usdhc1: usdhc1grp { |
| 457 |
fsl,pins = < |
| 458 |
MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 |
| 459 |
MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071 |
| 460 |
MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071 |
| 461 |
MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071 |
| 462 |
MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071 |
| 463 |
MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071 |
| 464 |
>; |
| 465 |
}; |
| 466 |
}; |
| 467 |
|
| 468 |
&pcie { |
| 469 |
pinctrl-names = "default"; |
| 470 |
pinctrl-0 = <&pinctrl_pcie>; |
| 471 |
reset-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>; |
| 472 |
vpcie-supply = <®_pcie_power_on_gpio>; |
| 473 |
status = "okay"; |
| 474 |
}; |
| 475 |
|
| 476 |
&sata { |
| 477 |
status = "okay"; |
| 478 |
}; |
| 479 |
|
| 480 |
&snvs_poweroff { |
| 481 |
status = "okay"; |
| 482 |
}; |
| 483 |
|
| 484 |
&spdif { |
| 485 |
pinctrl-names = "default"; |
| 486 |
pinctrl-0 = <&pinctrl_spdif>; |
| 487 |
status = "okay"; |
| 488 |
}; |
| 489 |
|
| 490 |
&ssi2 { |
| 491 |
assigned-clocks = <&clks IMX6QDL_CLK_SSI2_SEL>, |
| 492 |
<&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>; |
| 493 |
assigned-clock-parents = <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>; |
| 494 |
assigned-clock-rates = <0>, <786432000>; |
| 495 |
status = "okay"; |
| 496 |
}; |
| 497 |
|
| 498 |
&uart4 { |
| 499 |
pinctrl-names = "default"; |
| 500 |
pinctrl-0 = <&pinctrl_uart4>; |
| 501 |
status = "okay"; |
| 502 |
}; |
| 503 |
|
| 504 |
&usbh1 { |
| 505 |
vbus-supply = <®_usb_h1_vbus>; |
| 506 |
pinctrl-names = "default"; |
| 507 |
pinctrl-0 = <&pinctrl_usbh1>; |
| 508 |
status = "okay"; |
| 509 |
}; |
| 510 |
|
| 511 |
&usbotg { |
| 512 |
vbus-supply = <®_usb_otg_vbus>; |
| 513 |
pinctrl-names = "default"; |
| 514 |
pinctrl-0 = <&pinctrl_usbotg>; |
| 515 |
dr_mode = "otg"; |
| 516 |
status = "okay"; |
| 517 |
}; |
| 518 |
|
| 519 |
&usdhc1 { |
| 520 |
pinctrl-names = "default"; |
| 521 |
pinctrl-0 = <&pinctrl_usdhc1>; |
| 522 |
mmc-pwrseq = <&awnh387_pwrseq>; |
| 523 |
non-removable; |
| 524 |
/* |
| 525 |
* If the OS probes the Bluetooth AMP function advertised on this bus |
| 526 |
* but the firmware in place does not support it, the WiFi/BT module |
| 527 |
* gets unresponsive. |
| 528 |
* Users who configured their OS properly can enable this node to gain |
| 529 |
* WiFi and/or plain Bluetooth support. |
| 530 |
*/ |
| 531 |
status = "disabled"; |
| 532 |
}; |