| 1 |
/* |
| 2 |
* Copyright (C) 2013,2014 Russell King |
| 3 |
* |
| 4 |
* This file is dual-licensed: you can use it either under the terms |
| 5 |
* of the GPL or the X11 license, at your option. Note that this dual |
| 6 |
* licensing only applies to this file, and not this project as a |
| 7 |
* whole. |
| 8 |
* |
| 9 |
* a) This file is free software; you can redistribute it and/or |
| 10 |
* modify it under the terms of the GNU General Public License |
| 11 |
* version 2 as published by the Free Software Foundation. |
| 12 |
* |
| 13 |
* This file is distributed in the hope that it will be useful, |
| 14 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 16 |
* GNU General Public License for more details. |
| 17 |
* |
| 18 |
* Or, alternatively, |
| 19 |
* |
| 20 |
* b) Permission is hereby granted, free of charge, to any person |
| 21 |
* obtaining a copy of this software and associated documentation |
| 22 |
* files (the "Software"), to deal in the Software without |
| 23 |
* restriction, including without limitation the rights to use, |
| 24 |
* copy, modify, merge, publish, distribute, sublicense, and/or |
| 25 |
* sell copies of the Software, and to permit persons to whom the |
| 26 |
* Software is furnished to do so, subject to the following |
| 27 |
* conditions: |
| 28 |
* |
| 29 |
* The above copyright notice and this permission notice shall be |
| 30 |
* included in all copies or substantial portions of the Software. |
| 31 |
* |
| 32 |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 33 |
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| 34 |
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 35 |
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| 36 |
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| 37 |
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| 38 |
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| 39 |
* OTHER DEALINGS IN THE SOFTWARE. |
| 40 |
*/ |
| 41 |
#include <dt-bindings/gpio/gpio.h> |
| 42 |
|
| 43 |
/ { |
| 44 |
vcc_3v3: regulator-vcc-3v3 { |
| 45 |
compatible = "regulator-fixed"; |
| 46 |
regulator-always-on; |
| 47 |
regulator-name = "vcc_3v3"; |
| 48 |
regulator-min-microvolt = <3300000>; |
| 49 |
regulator-max-microvolt = <3300000>; |
| 50 |
}; |
| 51 |
}; |
| 52 |
|
| 53 |
&fec { |
| 54 |
pinctrl-names = "default"; |
| 55 |
pinctrl-0 = <&pinctrl_microsom_enet_ar8035>; |
| 56 |
phy-mode = "rgmii-id"; |
| 57 |
|
| 58 |
/* |
| 59 |
* The PHY seems to require a long-enough reset duration to avoid |
| 60 |
* some rare issues where the PHY gets stuck in an inconsistent and |
| 61 |
* non-functional state at boot-up. 10ms proved to be fine . |
| 62 |
*/ |
| 63 |
phy-reset-duration = <10>; |
| 64 |
phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; |
| 65 |
status = "okay"; |
| 66 |
|
| 67 |
mdio { |
| 68 |
#address-cells = <1>; |
| 69 |
#size-cells = <0>; |
| 70 |
|
| 71 |
/* |
| 72 |
* The PHY can appear at either address 0 or 4 due to the |
| 73 |
* configuration (LED) pin not being pulled sufficiently. |
| 74 |
*/ |
| 75 |
ethernet-phy@0 { |
| 76 |
reg = <0>; |
| 77 |
qca,clk-out-frequency = <125000000>; |
| 78 |
qca,smarteee-tw-us-1g = <24>; |
| 79 |
}; |
| 80 |
|
| 81 |
ethernet-phy@4 { |
| 82 |
reg = <4>; |
| 83 |
qca,clk-out-frequency = <125000000>; |
| 84 |
qca,smarteee-tw-us-1g = <24>; |
| 85 |
}; |
| 86 |
|
| 87 |
/* |
| 88 |
* ADIN1300 (som rev 1.9 or later) is always at address 1. It |
| 89 |
* will be enabled automatically by U-Boot if detected. |
| 90 |
*/ |
| 91 |
ethernet-phy@1 { |
| 92 |
reg = <1>; |
| 93 |
adi,phy-output-clock = "125mhz-free-running"; |
| 94 |
status = "disabled"; |
| 95 |
}; |
| 96 |
}; |
| 97 |
}; |
| 98 |
|
| 99 |
&iomuxc { |
| 100 |
pinctrl_microsom_enet_ar8035: microsom-enet-ar8035grp { |
| 101 |
fsl,pins = < |
| 102 |
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0 |
| 103 |
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 |
| 104 |
/* AR8035 reset */ |
| 105 |
MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0 |
| 106 |
/* AR8035 interrupt */ |
| 107 |
MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 |
| 108 |
/* GPIO16 -> AR8035 25MHz */ |
| 109 |
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0b0 |
| 110 |
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x13030 |
| 111 |
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 |
| 112 |
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 |
| 113 |
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 |
| 114 |
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 |
| 115 |
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 |
| 116 |
/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */ |
| 117 |
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1 |
| 118 |
/* AR8035 pin strapping: IO voltage: pull up */ |
| 119 |
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 |
| 120 |
/* AR8035 pin strapping: PHYADDR#0: pull down */ |
| 121 |
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030 |
| 122 |
/* AR8035 pin strapping: PHYADDR#1: pull down */ |
| 123 |
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030 |
| 124 |
/* AR8035 pin strapping: MODE#1: pull up */ |
| 125 |
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 |
| 126 |
/* AR8035 pin strapping: MODE#3: pull up */ |
| 127 |
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 |
| 128 |
/* AR8035 pin strapping: MODE#0: pull down */ |
| 129 |
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030 |
| 130 |
|
| 131 |
/* |
| 132 |
* As the RMII pins are also connected to RGMII |
| 133 |
* so that an AR8030 can be placed, set these |
| 134 |
* to high-z with the same pulls as above. |
| 135 |
* Use the GPIO settings to avoid changing the |
| 136 |
* input select registers. |
| 137 |
*/ |
| 138 |
MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x03000 |
| 139 |
MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x03000 |
| 140 |
MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x03000 |
| 141 |
>; |
| 142 |
}; |
| 143 |
|
| 144 |
pinctrl_microsom_uart1: microsom-uart1grp { |
| 145 |
fsl,pins = < |
| 146 |
MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 |
| 147 |
MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 |
| 148 |
>; |
| 149 |
}; |
| 150 |
}; |
| 151 |
|
| 152 |
&uart1 { |
| 153 |
pinctrl-names = "default"; |
| 154 |
pinctrl-0 = <&pinctrl_microsom_uart1>; |
| 155 |
status = "okay"; |
| 156 |
}; |