| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
| 2 |
/* |
| 3 |
* Copyright 2017-2022 Toradex |
| 4 |
*/ |
| 5 |
|
| 6 |
/ { |
| 7 |
chosen { |
| 8 |
stdout-path = "serial0:115200n8"; |
| 9 |
}; |
| 10 |
|
| 11 |
gpio-keys { |
| 12 |
compatible = "gpio-keys"; |
| 13 |
pinctrl-names = "default"; |
| 14 |
pinctrl-0 = <&pinctrl_snvs_gpiokeys>; |
| 15 |
|
| 16 |
key-power { |
| 17 |
label = "Wake-Up"; |
| 18 |
gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; |
| 19 |
linux,code = <KEY_WAKEUP>; |
| 20 |
debounce-interval = <10>; |
| 21 |
wakeup-source; |
| 22 |
}; |
| 23 |
}; |
| 24 |
|
| 25 |
reg_3v3: regulator-3v3 { |
| 26 |
compatible = "regulator-fixed"; |
| 27 |
regulator-name = "3.3V"; |
| 28 |
regulator-min-microvolt = <3300000>; |
| 29 |
regulator-max-microvolt = <3300000>; |
| 30 |
}; |
| 31 |
|
| 32 |
reg_5v0: regulator-5v0 { |
| 33 |
compatible = "regulator-fixed"; |
| 34 |
regulator-name = "5V"; |
| 35 |
regulator-min-microvolt = <5000000>; |
| 36 |
regulator-max-microvolt = <5000000>; |
| 37 |
}; |
| 38 |
|
| 39 |
reg_usbh_vbus: regulator-usbh-vbus { |
| 40 |
compatible = "regulator-fixed"; |
| 41 |
pinctrl-names = "default"; |
| 42 |
pinctrl-0 = <&pinctrl_usbh_reg>; |
| 43 |
regulator-name = "VCC_USB[1-4]"; |
| 44 |
regulator-min-microvolt = <5000000>; |
| 45 |
regulator-max-microvolt = <5000000>; |
| 46 |
gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; |
| 47 |
vin-supply = <®_5v0>; |
| 48 |
}; |
| 49 |
}; |
| 50 |
|
| 51 |
&adc1 { |
| 52 |
status = "okay"; |
| 53 |
}; |
| 54 |
|
| 55 |
&ecspi1 { |
| 56 |
status = "okay"; |
| 57 |
|
| 58 |
num-cs = <2>; |
| 59 |
cs-gpios = < |
| 60 |
&gpio3 26 GPIO_ACTIVE_HIGH /* SODIMM 86 LCD_DATA21 */ |
| 61 |
&gpio4 28 GPIO_ACTIVE_HIGH /* SODIMM 65 CSI_DATA07 */ |
| 62 |
>; |
| 63 |
}; |
| 64 |
|
| 65 |
/* |
| 66 |
* Following SODIMM Pins should not be accessed as GPIO on Aster board: |
| 67 |
* 134 - AIN5_SCL (no connection) |
| 68 |
* 127 - Voltage Level Translator OE# signal (IC11 and IC12) |
| 69 |
* |
| 70 |
* To configure GPIO to LED5, please disable FEC2 and uncomment the following: |
| 71 |
* &iomuxc { |
| 72 |
* pinctrl-names = "default"; |
| 73 |
* pinctrl-0 = < |
| 74 |
* &pinctrl_gpio1 |
| 75 |
* &pinctrl_gpio2 |
| 76 |
* &pinctrl_gpio3 |
| 77 |
* &pinctrl_gpio4 |
| 78 |
* &pinctrl_gpio6 - for non-WiFi modules only |
| 79 |
* &pinctrl_gpio7 |
| 80 |
* &pinctrl_gpio_aster |
| 81 |
* >; |
| 82 |
* |
| 83 |
* pinctrl_gpio_aster: gpio-aster { |
| 84 |
* fsl,pins = < |
| 85 |
* MX6UL_PAD_GPIO1_IO07__GPIO1_IO07 0x1b0b0 |
| 86 |
* >; |
| 87 |
* }; |
| 88 |
* }; |
| 89 |
*/ |
| 90 |
|
| 91 |
&i2c1 { |
| 92 |
status = "okay"; |
| 93 |
|
| 94 |
m41t0m6: rtc@68 { |
| 95 |
compatible = "st,m41t0"; |
| 96 |
reg = <0x68>; |
| 97 |
}; |
| 98 |
}; |
| 99 |
|
| 100 |
/* PWM <A> */ |
| 101 |
&pwm4 { |
| 102 |
status = "okay"; |
| 103 |
}; |
| 104 |
|
| 105 |
/* PWM <B> */ |
| 106 |
&pwm5 { |
| 107 |
status = "okay"; |
| 108 |
}; |
| 109 |
|
| 110 |
/* PWM <C> */ |
| 111 |
&pwm6 { |
| 112 |
status = "okay"; |
| 113 |
}; |
| 114 |
|
| 115 |
/* PWM <D> */ |
| 116 |
&pwm7 { |
| 117 |
status = "okay"; |
| 118 |
}; |
| 119 |
|
| 120 |
&uart1 { |
| 121 |
status = "okay"; |
| 122 |
}; |
| 123 |
|
| 124 |
&uart2 { |
| 125 |
status = "okay"; |
| 126 |
}; |
| 127 |
|
| 128 |
&uart5 { |
| 129 |
status = "okay"; |
| 130 |
}; |
| 131 |
|
| 132 |
&usbotg1 { |
| 133 |
disable-over-current; |
| 134 |
vbus-supply = <®_usbh_vbus>; |
| 135 |
status = "okay"; |
| 136 |
}; |
| 137 |
|
| 138 |
&usbotg2 { |
| 139 |
disable-over-current; |
| 140 |
vbus-supply = <®_usbh_vbus>; |
| 141 |
status = "okay"; |
| 142 |
}; |
| 143 |
|
| 144 |
&usdhc1 { |
| 145 |
vmmc-supply = <®_3v3>; |
| 146 |
status = "okay"; |
| 147 |
}; |