| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 |
/* |
| 3 |
* Copyright 2013 Sascha Hauer, Pengutronix |
| 4 |
* Copyright 2013-2017 Markus Niebel <[email protected]> |
| 5 |
*/ |
| 6 |
|
| 7 |
#include <dt-bindings/gpio/gpio.h> |
| 8 |
|
| 9 |
&fec { |
| 10 |
/delete-property/ interrupts; |
| 11 |
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, |
| 12 |
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; |
| 13 |
fsl,err006687-workaround-present; |
| 14 |
}; |
| 15 |
|
| 16 |
&i2c1 { |
| 17 |
pinctrl-names = "default", "gpio"; |
| 18 |
pinctrl-0 = <&pinctrl_i2c1>; |
| 19 |
pinctrl-1 = <&pinctrl_i2c1_recovery>; |
| 20 |
scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 21 |
sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 22 |
clock-frequency = <100000>; |
| 23 |
status = "okay"; |
| 24 |
|
| 25 |
pmic: pmic@8 { |
| 26 |
compatible = "fsl,pfuze100"; |
| 27 |
reg = <0x08>; |
| 28 |
}; |
| 29 |
|
| 30 |
temperature-sensor@48 { |
| 31 |
compatible = "national,lm75a"; |
| 32 |
reg = <0x48>; |
| 33 |
vs-supply = <&sw4_reg>; |
| 34 |
}; |
| 35 |
|
| 36 |
eeprom@50 { |
| 37 |
compatible = "st,24c64", "atmel,24c64"; |
| 38 |
reg = <0x50>; |
| 39 |
pagesize = <32>; |
| 40 |
vcc-supply = <&sw4_reg>; |
| 41 |
}; |
| 42 |
}; |
| 43 |
|
| 44 |
&iomuxc { |
| 45 |
/* |
| 46 |
* This pinmuxing is required for the ERR006687 workaround. Board |
| 47 |
* DTS files that enable the FEC controller with |
| 48 |
* fsl,err006687-workaround-present must include this group. |
| 49 |
*/ |
| 50 |
pinctrl_enet_fix: enetfixgrp { |
| 51 |
fsl,pins = < |
| 52 |
/* ENET ping patch */ |
| 53 |
MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 |
| 54 |
>; |
| 55 |
}; |
| 56 |
}; |