| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
// |
| 3 |
// Copyright 2013 Freescale Semiconductor, Inc. |
| 4 |
|
| 5 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 6 |
#include "imx6sl-pinfunc.h" |
| 7 |
#include <dt-bindings/clock/imx6sl-clock.h> |
| 8 |
|
| 9 |
/ { |
| 10 |
#address-cells = <1>; |
| 11 |
#size-cells = <1>; |
| 12 |
/* |
| 13 |
* The decompressor and also some bootloaders rely on a |
| 14 |
* pre-existing /chosen node to be available to insert the |
| 15 |
* command line and merge other ATAGS info. |
| 16 |
*/ |
| 17 |
chosen {}; |
| 18 |
|
| 19 |
aliases { |
| 20 |
ethernet0 = &fec; |
| 21 |
gpio0 = &gpio1; |
| 22 |
gpio1 = &gpio2; |
| 23 |
gpio2 = &gpio3; |
| 24 |
gpio3 = &gpio4; |
| 25 |
gpio4 = &gpio5; |
| 26 |
i2c0 = &i2c1; |
| 27 |
i2c1 = &i2c2; |
| 28 |
i2c2 = &i2c3; |
| 29 |
mmc0 = &usdhc1; |
| 30 |
mmc1 = &usdhc2; |
| 31 |
mmc2 = &usdhc3; |
| 32 |
mmc3 = &usdhc4; |
| 33 |
serial0 = &uart1; |
| 34 |
serial1 = &uart2; |
| 35 |
serial2 = &uart3; |
| 36 |
serial3 = &uart4; |
| 37 |
serial4 = &uart5; |
| 38 |
spi0 = &ecspi1; |
| 39 |
spi1 = &ecspi2; |
| 40 |
spi2 = &ecspi3; |
| 41 |
spi3 = &ecspi4; |
| 42 |
usb0 = &usbotg1; |
| 43 |
usb1 = &usbotg2; |
| 44 |
usb2 = &usbh; |
| 45 |
usbphy0 = &usbphy1; |
| 46 |
usbphy1 = &usbphy2; |
| 47 |
}; |
| 48 |
|
| 49 |
cpus { |
| 50 |
#address-cells = <1>; |
| 51 |
#size-cells = <0>; |
| 52 |
|
| 53 |
cpu0: cpu@0 { |
| 54 |
compatible = "arm,cortex-a9"; |
| 55 |
device_type = "cpu"; |
| 56 |
reg = <0x0>; |
| 57 |
next-level-cache = <&L2>; |
| 58 |
operating-points = |
| 59 |
/* kHz uV */ |
| 60 |
<996000 1275000>, |
| 61 |
<792000 1175000>, |
| 62 |
<396000 975000>; |
| 63 |
fsl,soc-operating-points = |
| 64 |
/* ARM kHz SOC-PU uV */ |
| 65 |
<996000 1225000>, |
| 66 |
<792000 1175000>, |
| 67 |
<396000 1175000>; |
| 68 |
clock-latency = <61036>; /* two CLK32 periods */ |
| 69 |
#cooling-cells = <2>; |
| 70 |
clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>, |
| 71 |
<&clks IMX6SL_CLK_STEP>, <&clks IMX6SL_CLK_PLL1_SW>, |
| 72 |
<&clks IMX6SL_CLK_PLL1_SYS>; |
| 73 |
clock-names = "arm", "pll2_pfd2_396m", "step", |
| 74 |
"pll1_sw", "pll1_sys"; |
| 75 |
arm-supply = <®_arm>; |
| 76 |
pu-supply = <®_pu>; |
| 77 |
soc-supply = <®_soc>; |
| 78 |
nvmem-cells = <&cpu_speed_grade>; |
| 79 |
nvmem-cell-names = "speed_grade"; |
| 80 |
}; |
| 81 |
}; |
| 82 |
|
| 83 |
clocks { |
| 84 |
ckil { |
| 85 |
compatible = "fixed-clock"; |
| 86 |
#clock-cells = <0>; |
| 87 |
clock-frequency = <32768>; |
| 88 |
}; |
| 89 |
|
| 90 |
osc { |
| 91 |
compatible = "fixed-clock"; |
| 92 |
#clock-cells = <0>; |
| 93 |
clock-frequency = <24000000>; |
| 94 |
}; |
| 95 |
}; |
| 96 |
|
| 97 |
pmu { |
| 98 |
compatible = "arm,cortex-a9-pmu"; |
| 99 |
interrupt-parent = <&gpc>; |
| 100 |
interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>; |
| 101 |
}; |
| 102 |
|
| 103 |
usbphynop1: usbphynop1 { |
| 104 |
compatible = "usb-nop-xceiv"; |
| 105 |
#phy-cells = <0>; |
| 106 |
}; |
| 107 |
|
| 108 |
soc { |
| 109 |
#address-cells = <1>; |
| 110 |
#size-cells = <1>; |
| 111 |
compatible = "simple-bus"; |
| 112 |
interrupt-parent = <&gpc>; |
| 113 |
ranges; |
| 114 |
|
| 115 |
ocram: sram@900000 { |
| 116 |
compatible = "mmio-sram"; |
| 117 |
reg = <0x00900000 0x20000>; |
| 118 |
ranges = <0 0x00900000 0x20000>; |
| 119 |
#address-cells = <1>; |
| 120 |
#size-cells = <1>; |
| 121 |
clocks = <&clks IMX6SL_CLK_OCRAM>; |
| 122 |
}; |
| 123 |
|
| 124 |
intc: interrupt-controller@a01000 { |
| 125 |
compatible = "arm,cortex-a9-gic"; |
| 126 |
#interrupt-cells = <3>; |
| 127 |
interrupt-controller; |
| 128 |
reg = <0x00a01000 0x1000>, |
| 129 |
<0x00a00100 0x100>; |
| 130 |
interrupt-parent = <&intc>; |
| 131 |
}; |
| 132 |
|
| 133 |
L2: cache-controller@a02000 { |
| 134 |
compatible = "arm,pl310-cache"; |
| 135 |
reg = <0x00a02000 0x1000>; |
| 136 |
interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>; |
| 137 |
cache-unified; |
| 138 |
cache-level = <2>; |
| 139 |
arm,tag-latency = <4 2 3>; |
| 140 |
arm,data-latency = <4 2 3>; |
| 141 |
}; |
| 142 |
|
| 143 |
aips1: bus@2000000 { |
| 144 |
compatible = "fsl,aips-bus", "simple-bus"; |
| 145 |
#address-cells = <1>; |
| 146 |
#size-cells = <1>; |
| 147 |
reg = <0x02000000 0x100000>; |
| 148 |
ranges; |
| 149 |
|
| 150 |
spba: spba-bus@2000000 { |
| 151 |
compatible = "fsl,spba-bus", "simple-bus"; |
| 152 |
#address-cells = <1>; |
| 153 |
#size-cells = <1>; |
| 154 |
reg = <0x02000000 0x40000>; |
| 155 |
ranges; |
| 156 |
|
| 157 |
spdif: spdif@2004000 { |
| 158 |
compatible = "fsl,imx6sl-spdif", |
| 159 |
"fsl,imx35-spdif"; |
| 160 |
reg = <0x02004000 0x4000>; |
| 161 |
interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>; |
| 162 |
dmas = <&sdma 14 18 0>, |
| 163 |
<&sdma 15 18 0>; |
| 164 |
dma-names = "rx", "tx"; |
| 165 |
clocks = <&clks IMX6SL_CLK_SPDIF_GCLK>, <&clks IMX6SL_CLK_OSC>, |
| 166 |
<&clks IMX6SL_CLK_SPDIF>, <&clks IMX6SL_CLK_DUMMY>, |
| 167 |
<&clks IMX6SL_CLK_DUMMY>, <&clks IMX6SL_CLK_DUMMY>, |
| 168 |
<&clks IMX6SL_CLK_IPG>, <&clks IMX6SL_CLK_DUMMY>, |
| 169 |
<&clks IMX6SL_CLK_DUMMY>, <&clks IMX6SL_CLK_SPBA>; |
| 170 |
clock-names = "core", "rxtx0", |
| 171 |
"rxtx1", "rxtx2", |
| 172 |
"rxtx3", "rxtx4", |
| 173 |
"rxtx5", "rxtx6", |
| 174 |
"rxtx7", "spba"; |
| 175 |
status = "disabled"; |
| 176 |
}; |
| 177 |
|
| 178 |
ecspi1: spi@2008000 { |
| 179 |
#address-cells = <1>; |
| 180 |
#size-cells = <0>; |
| 181 |
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; |
| 182 |
reg = <0x02008000 0x4000>; |
| 183 |
interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; |
| 184 |
clocks = <&clks IMX6SL_CLK_ECSPI1>, |
| 185 |
<&clks IMX6SL_CLK_ECSPI1>; |
| 186 |
clock-names = "ipg", "per"; |
| 187 |
status = "disabled"; |
| 188 |
}; |
| 189 |
|
| 190 |
ecspi2: spi@200c000 { |
| 191 |
#address-cells = <1>; |
| 192 |
#size-cells = <0>; |
| 193 |
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; |
| 194 |
reg = <0x0200c000 0x4000>; |
| 195 |
interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>; |
| 196 |
clocks = <&clks IMX6SL_CLK_ECSPI2>, |
| 197 |
<&clks IMX6SL_CLK_ECSPI2>; |
| 198 |
clock-names = "ipg", "per"; |
| 199 |
status = "disabled"; |
| 200 |
}; |
| 201 |
|
| 202 |
ecspi3: spi@2010000 { |
| 203 |
#address-cells = <1>; |
| 204 |
#size-cells = <0>; |
| 205 |
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; |
| 206 |
reg = <0x02010000 0x4000>; |
| 207 |
interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>; |
| 208 |
clocks = <&clks IMX6SL_CLK_ECSPI3>, |
| 209 |
<&clks IMX6SL_CLK_ECSPI3>; |
| 210 |
clock-names = "ipg", "per"; |
| 211 |
status = "disabled"; |
| 212 |
}; |
| 213 |
|
| 214 |
ecspi4: spi@2014000 { |
| 215 |
#address-cells = <1>; |
| 216 |
#size-cells = <0>; |
| 217 |
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; |
| 218 |
reg = <0x02014000 0x4000>; |
| 219 |
interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; |
| 220 |
clocks = <&clks IMX6SL_CLK_ECSPI4>, |
| 221 |
<&clks IMX6SL_CLK_ECSPI4>; |
| 222 |
clock-names = "ipg", "per"; |
| 223 |
status = "disabled"; |
| 224 |
}; |
| 225 |
|
| 226 |
uart5: serial@2018000 { |
| 227 |
compatible = "fsl,imx6sl-uart", |
| 228 |
"fsl,imx6q-uart", "fsl,imx21-uart"; |
| 229 |
reg = <0x02018000 0x4000>; |
| 230 |
interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>; |
| 231 |
clocks = <&clks IMX6SL_CLK_UART>, |
| 232 |
<&clks IMX6SL_CLK_UART_SERIAL>; |
| 233 |
clock-names = "ipg", "per"; |
| 234 |
dmas = <&sdma 33 4 0>, <&sdma 34 4 0>; |
| 235 |
dma-names = "rx", "tx"; |
| 236 |
status = "disabled"; |
| 237 |
}; |
| 238 |
|
| 239 |
uart1: serial@2020000 { |
| 240 |
compatible = "fsl,imx6sl-uart", |
| 241 |
"fsl,imx6q-uart", "fsl,imx21-uart"; |
| 242 |
reg = <0x02020000 0x4000>; |
| 243 |
interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>; |
| 244 |
clocks = <&clks IMX6SL_CLK_UART>, |
| 245 |
<&clks IMX6SL_CLK_UART_SERIAL>; |
| 246 |
clock-names = "ipg", "per"; |
| 247 |
dmas = <&sdma 25 4 0>, <&sdma 26 4 0>; |
| 248 |
dma-names = "rx", "tx"; |
| 249 |
status = "disabled"; |
| 250 |
}; |
| 251 |
|
| 252 |
uart2: serial@2024000 { |
| 253 |
compatible = "fsl,imx6sl-uart", |
| 254 |
"fsl,imx6q-uart", "fsl,imx21-uart"; |
| 255 |
reg = <0x02024000 0x4000>; |
| 256 |
interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>; |
| 257 |
clocks = <&clks IMX6SL_CLK_UART>, |
| 258 |
<&clks IMX6SL_CLK_UART_SERIAL>; |
| 259 |
clock-names = "ipg", "per"; |
| 260 |
dmas = <&sdma 27 4 0>, <&sdma 28 4 0>; |
| 261 |
dma-names = "rx", "tx"; |
| 262 |
status = "disabled"; |
| 263 |
}; |
| 264 |
|
| 265 |
ssi1: ssi@2028000 { |
| 266 |
#sound-dai-cells = <0>; |
| 267 |
compatible = "fsl,imx6sl-ssi", |
| 268 |
"fsl,imx51-ssi"; |
| 269 |
reg = <0x02028000 0x4000>; |
| 270 |
interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>; |
| 271 |
clocks = <&clks IMX6SL_CLK_SSI1_IPG>, |
| 272 |
<&clks IMX6SL_CLK_SSI1>; |
| 273 |
clock-names = "ipg", "baud"; |
| 274 |
dmas = <&sdma 37 1 0>, |
| 275 |
<&sdma 38 1 0>; |
| 276 |
dma-names = "rx", "tx"; |
| 277 |
fsl,fifo-depth = <15>; |
| 278 |
status = "disabled"; |
| 279 |
}; |
| 280 |
|
| 281 |
ssi2: ssi@202c000 { |
| 282 |
#sound-dai-cells = <0>; |
| 283 |
compatible = "fsl,imx6sl-ssi", |
| 284 |
"fsl,imx51-ssi"; |
| 285 |
reg = <0x0202c000 0x4000>; |
| 286 |
interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>; |
| 287 |
clocks = <&clks IMX6SL_CLK_SSI2_IPG>, |
| 288 |
<&clks IMX6SL_CLK_SSI2>; |
| 289 |
clock-names = "ipg", "baud"; |
| 290 |
dmas = <&sdma 41 1 0>, |
| 291 |
<&sdma 42 1 0>; |
| 292 |
dma-names = "rx", "tx"; |
| 293 |
fsl,fifo-depth = <15>; |
| 294 |
status = "disabled"; |
| 295 |
}; |
| 296 |
|
| 297 |
ssi3: ssi@2030000 { |
| 298 |
#sound-dai-cells = <0>; |
| 299 |
compatible = "fsl,imx6sl-ssi", |
| 300 |
"fsl,imx51-ssi"; |
| 301 |
reg = <0x02030000 0x4000>; |
| 302 |
interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>; |
| 303 |
clocks = <&clks IMX6SL_CLK_SSI3_IPG>, |
| 304 |
<&clks IMX6SL_CLK_SSI3>; |
| 305 |
clock-names = "ipg", "baud"; |
| 306 |
dmas = <&sdma 45 1 0>, |
| 307 |
<&sdma 46 1 0>; |
| 308 |
dma-names = "rx", "tx"; |
| 309 |
fsl,fifo-depth = <15>; |
| 310 |
status = "disabled"; |
| 311 |
}; |
| 312 |
|
| 313 |
uart3: serial@2034000 { |
| 314 |
compatible = "fsl,imx6sl-uart", |
| 315 |
"fsl,imx6q-uart", "fsl,imx21-uart"; |
| 316 |
reg = <0x02034000 0x4000>; |
| 317 |
interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>; |
| 318 |
clocks = <&clks IMX6SL_CLK_UART>, |
| 319 |
<&clks IMX6SL_CLK_UART_SERIAL>; |
| 320 |
clock-names = "ipg", "per"; |
| 321 |
dmas = <&sdma 29 4 0>, <&sdma 30 4 0>; |
| 322 |
dma-names = "rx", "tx"; |
| 323 |
status = "disabled"; |
| 324 |
}; |
| 325 |
|
| 326 |
uart4: serial@2038000 { |
| 327 |
compatible = "fsl,imx6sl-uart", |
| 328 |
"fsl,imx6q-uart", "fsl,imx21-uart"; |
| 329 |
reg = <0x02038000 0x4000>; |
| 330 |
interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>; |
| 331 |
clocks = <&clks IMX6SL_CLK_UART>, |
| 332 |
<&clks IMX6SL_CLK_UART_SERIAL>; |
| 333 |
clock-names = "ipg", "per"; |
| 334 |
dmas = <&sdma 31 4 0>, <&sdma 32 4 0>; |
| 335 |
dma-names = "rx", "tx"; |
| 336 |
status = "disabled"; |
| 337 |
}; |
| 338 |
}; |
| 339 |
|
| 340 |
pwm1: pwm@2080000 { |
| 341 |
#pwm-cells = <3>; |
| 342 |
compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; |
| 343 |
reg = <0x02080000 0x4000>; |
| 344 |
interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>; |
| 345 |
clocks = <&clks IMX6SL_CLK_PERCLK>, |
| 346 |
<&clks IMX6SL_CLK_PWM1>; |
| 347 |
clock-names = "ipg", "per"; |
| 348 |
}; |
| 349 |
|
| 350 |
pwm2: pwm@2084000 { |
| 351 |
#pwm-cells = <3>; |
| 352 |
compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; |
| 353 |
reg = <0x02084000 0x4000>; |
| 354 |
interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>; |
| 355 |
clocks = <&clks IMX6SL_CLK_PERCLK>, |
| 356 |
<&clks IMX6SL_CLK_PWM2>; |
| 357 |
clock-names = "ipg", "per"; |
| 358 |
}; |
| 359 |
|
| 360 |
pwm3: pwm@2088000 { |
| 361 |
#pwm-cells = <3>; |
| 362 |
compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; |
| 363 |
reg = <0x02088000 0x4000>; |
| 364 |
interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>; |
| 365 |
clocks = <&clks IMX6SL_CLK_PERCLK>, |
| 366 |
<&clks IMX6SL_CLK_PWM3>; |
| 367 |
clock-names = "ipg", "per"; |
| 368 |
}; |
| 369 |
|
| 370 |
pwm4: pwm@208c000 { |
| 371 |
#pwm-cells = <3>; |
| 372 |
compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; |
| 373 |
reg = <0x0208c000 0x4000>; |
| 374 |
interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; |
| 375 |
clocks = <&clks IMX6SL_CLK_PERCLK>, |
| 376 |
<&clks IMX6SL_CLK_PWM4>; |
| 377 |
clock-names = "ipg", "per"; |
| 378 |
}; |
| 379 |
|
| 380 |
gpt: timer@2098000 { |
| 381 |
compatible = "fsl,imx6sl-gpt", "fsl,imx6dl-gpt"; |
| 382 |
reg = <0x02098000 0x4000>; |
| 383 |
interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>; |
| 384 |
clocks = <&clks IMX6SL_CLK_GPT>, |
| 385 |
<&clks IMX6SL_CLK_GPT_SERIAL>; |
| 386 |
clock-names = "ipg", "per"; |
| 387 |
}; |
| 388 |
|
| 389 |
gpio1: gpio@209c000 { |
| 390 |
compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio"; |
| 391 |
reg = <0x0209c000 0x4000>; |
| 392 |
interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>, |
| 393 |
<0 67 IRQ_TYPE_LEVEL_HIGH>; |
| 394 |
gpio-controller; |
| 395 |
#gpio-cells = <2>; |
| 396 |
interrupt-controller; |
| 397 |
#interrupt-cells = <2>; |
| 398 |
gpio-ranges = <&iomuxc 0 22 1>, <&iomuxc 1 20 2>, |
| 399 |
<&iomuxc 3 23 1>, <&iomuxc 4 25 1>, |
| 400 |
<&iomuxc 5 24 1>, <&iomuxc 6 19 1>, |
| 401 |
<&iomuxc 7 36 2>, <&iomuxc 9 44 8>, |
| 402 |
<&iomuxc 17 38 6>, <&iomuxc 23 68 4>, |
| 403 |
<&iomuxc 27 64 4>, <&iomuxc 31 52 1>; |
| 404 |
}; |
| 405 |
|
| 406 |
gpio2: gpio@20a0000 { |
| 407 |
compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio"; |
| 408 |
reg = <0x020a0000 0x4000>; |
| 409 |
interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>, |
| 410 |
<0 69 IRQ_TYPE_LEVEL_HIGH>; |
| 411 |
gpio-controller; |
| 412 |
#gpio-cells = <2>; |
| 413 |
interrupt-controller; |
| 414 |
#interrupt-cells = <2>; |
| 415 |
gpio-ranges = <&iomuxc 0 53 3>, <&iomuxc 3 72 2>, |
| 416 |
<&iomuxc 5 34 2>, <&iomuxc 7 57 4>, |
| 417 |
<&iomuxc 11 56 1>, <&iomuxc 12 61 3>, |
| 418 |
<&iomuxc 15 107 1>, <&iomuxc 16 132 2>, |
| 419 |
<&iomuxc 18 135 1>, <&iomuxc 19 134 1>, |
| 420 |
<&iomuxc 20 108 2>, <&iomuxc 22 120 1>, |
| 421 |
<&iomuxc 23 125 7>, <&iomuxc 30 110 2>; |
| 422 |
}; |
| 423 |
|
| 424 |
gpio3: gpio@20a4000 { |
| 425 |
compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio"; |
| 426 |
reg = <0x020a4000 0x4000>; |
| 427 |
interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>, |
| 428 |
<0 71 IRQ_TYPE_LEVEL_HIGH>; |
| 429 |
gpio-controller; |
| 430 |
#gpio-cells = <2>; |
| 431 |
interrupt-controller; |
| 432 |
#interrupt-cells = <2>; |
| 433 |
gpio-ranges = <&iomuxc 0 112 8>, <&iomuxc 8 121 4>, |
| 434 |
<&iomuxc 12 97 4>, <&iomuxc 16 166 3>, |
| 435 |
<&iomuxc 19 85 2>, <&iomuxc 21 137 2>, |
| 436 |
<&iomuxc 23 136 1>, <&iomuxc 24 91 1>, |
| 437 |
<&iomuxc 25 99 1>, <&iomuxc 26 92 1>, |
| 438 |
<&iomuxc 27 100 1>, <&iomuxc 28 93 1>, |
| 439 |
<&iomuxc 29 101 1>, <&iomuxc 30 94 1>, |
| 440 |
<&iomuxc 31 102 1>; |
| 441 |
}; |
| 442 |
|
| 443 |
gpio4: gpio@20a8000 { |
| 444 |
compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio"; |
| 445 |
reg = <0x020a8000 0x4000>; |
| 446 |
interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>, |
| 447 |
<0 73 IRQ_TYPE_LEVEL_HIGH>; |
| 448 |
gpio-controller; |
| 449 |
#gpio-cells = <2>; |
| 450 |
interrupt-controller; |
| 451 |
#interrupt-cells = <2>; |
| 452 |
gpio-ranges = <&iomuxc 0 95 1>, <&iomuxc 1 103 1>, |
| 453 |
<&iomuxc 2 96 1>, <&iomuxc 3 104 1>, |
| 454 |
<&iomuxc 4 97 1>, <&iomuxc 5 105 1>, |
| 455 |
<&iomuxc 6 98 1>, <&iomuxc 7 106 1>, |
| 456 |
<&iomuxc 8 28 1>, <&iomuxc 9 27 1>, |
| 457 |
<&iomuxc 10 26 1>, <&iomuxc 11 29 1>, |
| 458 |
<&iomuxc 12 32 1>, <&iomuxc 13 31 1>, |
| 459 |
<&iomuxc 14 30 1>, <&iomuxc 15 33 1>, |
| 460 |
<&iomuxc 16 84 1>, <&iomuxc 17 79 2>, |
| 461 |
<&iomuxc 19 78 1>, <&iomuxc 20 76 1>, |
| 462 |
<&iomuxc 21 81 2>, <&iomuxc 23 75 1>, |
| 463 |
<&iomuxc 24 83 1>, <&iomuxc 25 74 1>, |
| 464 |
<&iomuxc 26 77 1>, <&iomuxc 27 159 1>, |
| 465 |
<&iomuxc 28 154 1>, <&iomuxc 29 157 1>, |
| 466 |
<&iomuxc 30 152 1>, <&iomuxc 31 156 1>; |
| 467 |
}; |
| 468 |
|
| 469 |
gpio5: gpio@20ac000 { |
| 470 |
compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio"; |
| 471 |
reg = <0x020ac000 0x4000>; |
| 472 |
interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>, |
| 473 |
<0 75 IRQ_TYPE_LEVEL_HIGH>; |
| 474 |
gpio-controller; |
| 475 |
#gpio-cells = <2>; |
| 476 |
interrupt-controller; |
| 477 |
#interrupt-cells = <2>; |
| 478 |
gpio-ranges = <&iomuxc 0 158 1>, <&iomuxc 1 151 1>, |
| 479 |
<&iomuxc 2 155 1>, <&iomuxc 3 153 1>, |
| 480 |
<&iomuxc 4 150 1>, <&iomuxc 5 149 1>, |
| 481 |
<&iomuxc 6 144 1>, <&iomuxc 7 147 1>, |
| 482 |
<&iomuxc 8 142 1>, <&iomuxc 9 146 1>, |
| 483 |
<&iomuxc 10 148 1>, <&iomuxc 11 141 1>, |
| 484 |
<&iomuxc 12 145 1>, <&iomuxc 13 143 1>, |
| 485 |
<&iomuxc 14 140 1>, <&iomuxc 15 139 1>, |
| 486 |
<&iomuxc 16 164 2>, <&iomuxc 18 160 1>, |
| 487 |
<&iomuxc 19 162 1>, <&iomuxc 20 163 1>, |
| 488 |
<&iomuxc 21 161 1>; |
| 489 |
}; |
| 490 |
|
| 491 |
kpp: keypad@20b8000 { |
| 492 |
compatible = "fsl,imx6sl-kpp", "fsl,imx21-kpp"; |
| 493 |
reg = <0x020b8000 0x4000>; |
| 494 |
interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; |
| 495 |
clocks = <&clks IMX6SL_CLK_IPG>; |
| 496 |
status = "disabled"; |
| 497 |
}; |
| 498 |
|
| 499 |
wdog1: watchdog@20bc000 { |
| 500 |
compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt"; |
| 501 |
reg = <0x020bc000 0x4000>; |
| 502 |
interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; |
| 503 |
clocks = <&clks IMX6SL_CLK_IPG>; |
| 504 |
}; |
| 505 |
|
| 506 |
wdog2: watchdog@20c0000 { |
| 507 |
compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt"; |
| 508 |
reg = <0x020c0000 0x4000>; |
| 509 |
interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; |
| 510 |
clocks = <&clks IMX6SL_CLK_IPG>; |
| 511 |
status = "disabled"; |
| 512 |
}; |
| 513 |
|
| 514 |
clks: clock-controller@20c4000 { |
| 515 |
compatible = "fsl,imx6sl-ccm"; |
| 516 |
reg = <0x020c4000 0x4000>; |
| 517 |
interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>, |
| 518 |
<0 88 IRQ_TYPE_LEVEL_HIGH>; |
| 519 |
#clock-cells = <1>; |
| 520 |
}; |
| 521 |
|
| 522 |
anatop: anatop@20c8000 { |
| 523 |
compatible = "fsl,imx6sl-anatop", |
| 524 |
"fsl,imx6q-anatop", |
| 525 |
"syscon", "simple-mfd"; |
| 526 |
reg = <0x020c8000 0x1000>; |
| 527 |
interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>, |
| 528 |
<0 54 IRQ_TYPE_LEVEL_HIGH>, |
| 529 |
<0 127 IRQ_TYPE_LEVEL_HIGH>; |
| 530 |
|
| 531 |
reg_vdd1p1: regulator-1p1 { |
| 532 |
compatible = "fsl,anatop-regulator"; |
| 533 |
regulator-name = "vdd1p1"; |
| 534 |
regulator-min-microvolt = <1000000>; |
| 535 |
regulator-max-microvolt = <1200000>; |
| 536 |
regulator-always-on; |
| 537 |
anatop-reg-offset = <0x110>; |
| 538 |
anatop-vol-bit-shift = <8>; |
| 539 |
anatop-vol-bit-width = <5>; |
| 540 |
anatop-min-bit-val = <4>; |
| 541 |
anatop-min-voltage = <800000>; |
| 542 |
anatop-max-voltage = <1375000>; |
| 543 |
anatop-enable-bit = <0>; |
| 544 |
}; |
| 545 |
|
| 546 |
reg_vdd3p0: regulator-3p0 { |
| 547 |
compatible = "fsl,anatop-regulator"; |
| 548 |
regulator-name = "vdd3p0"; |
| 549 |
regulator-min-microvolt = <2625000>; |
| 550 |
regulator-max-microvolt = <3400000>; |
| 551 |
regulator-always-on; |
| 552 |
anatop-reg-offset = <0x120>; |
| 553 |
anatop-vol-bit-shift = <8>; |
| 554 |
anatop-vol-bit-width = <5>; |
| 555 |
anatop-min-bit-val = <0>; |
| 556 |
anatop-min-voltage = <2625000>; |
| 557 |
anatop-max-voltage = <3400000>; |
| 558 |
anatop-enable-bit = <0>; |
| 559 |
}; |
| 560 |
|
| 561 |
reg_vdd2p5: regulator-2p5 { |
| 562 |
compatible = "fsl,anatop-regulator"; |
| 563 |
regulator-name = "vdd2p5"; |
| 564 |
regulator-min-microvolt = <2250000>; |
| 565 |
regulator-max-microvolt = <2750000>; |
| 566 |
regulator-always-on; |
| 567 |
anatop-reg-offset = <0x130>; |
| 568 |
anatop-vol-bit-shift = <8>; |
| 569 |
anatop-vol-bit-width = <5>; |
| 570 |
anatop-min-bit-val = <0>; |
| 571 |
anatop-min-voltage = <2100000>; |
| 572 |
anatop-max-voltage = <2850000>; |
| 573 |
anatop-enable-bit = <0>; |
| 574 |
}; |
| 575 |
|
| 576 |
reg_arm: regulator-vddcore { |
| 577 |
compatible = "fsl,anatop-regulator"; |
| 578 |
regulator-name = "vddarm"; |
| 579 |
regulator-min-microvolt = <725000>; |
| 580 |
regulator-max-microvolt = <1450000>; |
| 581 |
regulator-always-on; |
| 582 |
anatop-reg-offset = <0x140>; |
| 583 |
anatop-vol-bit-shift = <0>; |
| 584 |
anatop-vol-bit-width = <5>; |
| 585 |
anatop-delay-reg-offset = <0x170>; |
| 586 |
anatop-delay-bit-shift = <24>; |
| 587 |
anatop-delay-bit-width = <2>; |
| 588 |
anatop-min-bit-val = <1>; |
| 589 |
anatop-min-voltage = <725000>; |
| 590 |
anatop-max-voltage = <1450000>; |
| 591 |
}; |
| 592 |
|
| 593 |
reg_pu: regulator-vddpu { |
| 594 |
compatible = "fsl,anatop-regulator"; |
| 595 |
regulator-name = "vddpu"; |
| 596 |
regulator-min-microvolt = <725000>; |
| 597 |
regulator-max-microvolt = <1450000>; |
| 598 |
anatop-reg-offset = <0x140>; |
| 599 |
anatop-vol-bit-shift = <9>; |
| 600 |
anatop-vol-bit-width = <5>; |
| 601 |
anatop-delay-reg-offset = <0x170>; |
| 602 |
anatop-delay-bit-shift = <26>; |
| 603 |
anatop-delay-bit-width = <2>; |
| 604 |
anatop-min-bit-val = <1>; |
| 605 |
anatop-min-voltage = <725000>; |
| 606 |
anatop-max-voltage = <1450000>; |
| 607 |
}; |
| 608 |
|
| 609 |
reg_soc: regulator-vddsoc { |
| 610 |
compatible = "fsl,anatop-regulator"; |
| 611 |
regulator-name = "vddsoc"; |
| 612 |
regulator-min-microvolt = <725000>; |
| 613 |
regulator-max-microvolt = <1450000>; |
| 614 |
regulator-always-on; |
| 615 |
anatop-reg-offset = <0x140>; |
| 616 |
anatop-vol-bit-shift = <18>; |
| 617 |
anatop-vol-bit-width = <5>; |
| 618 |
anatop-delay-reg-offset = <0x170>; |
| 619 |
anatop-delay-bit-shift = <28>; |
| 620 |
anatop-delay-bit-width = <2>; |
| 621 |
anatop-min-bit-val = <1>; |
| 622 |
anatop-min-voltage = <725000>; |
| 623 |
anatop-max-voltage = <1450000>; |
| 624 |
}; |
| 625 |
|
| 626 |
tempmon: tempmon { |
| 627 |
compatible = "fsl,imx6q-tempmon"; |
| 628 |
interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; |
| 629 |
interrupt-parent = <&gpc>; |
| 630 |
fsl,tempmon = <&anatop>; |
| 631 |
nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; |
| 632 |
nvmem-cell-names = "calib", "temp_grade"; |
| 633 |
clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>; |
| 634 |
#thermal-sensor-cells = <0>; |
| 635 |
}; |
| 636 |
}; |
| 637 |
|
| 638 |
usbphy1: usbphy@20c9000 { |
| 639 |
compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy"; |
| 640 |
reg = <0x020c9000 0x1000>; |
| 641 |
interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>; |
| 642 |
clocks = <&clks IMX6SL_CLK_USBPHY1>; |
| 643 |
phy-3p0-supply = <®_vdd3p0>; |
| 644 |
fsl,anatop = <&anatop>; |
| 645 |
}; |
| 646 |
|
| 647 |
usbphy2: usbphy@20ca000 { |
| 648 |
compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy"; |
| 649 |
reg = <0x020ca000 0x1000>; |
| 650 |
interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>; |
| 651 |
clocks = <&clks IMX6SL_CLK_USBPHY2>; |
| 652 |
phy-3p0-supply = <®_vdd3p0>; |
| 653 |
fsl,anatop = <&anatop>; |
| 654 |
}; |
| 655 |
|
| 656 |
snvs: snvs@20cc000 { |
| 657 |
compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; |
| 658 |
reg = <0x020cc000 0x4000>; |
| 659 |
|
| 660 |
snvs_rtc: snvs-rtc-lp { |
| 661 |
compatible = "fsl,sec-v4.0-mon-rtc-lp"; |
| 662 |
regmap = <&snvs>; |
| 663 |
offset = <0x34>; |
| 664 |
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>, |
| 665 |
<0 20 IRQ_TYPE_LEVEL_HIGH>; |
| 666 |
}; |
| 667 |
|
| 668 |
snvs_poweroff: snvs-poweroff { |
| 669 |
compatible = "syscon-poweroff"; |
| 670 |
regmap = <&snvs>; |
| 671 |
offset = <0x38>; |
| 672 |
value = <0x60>; |
| 673 |
mask = <0x60>; |
| 674 |
status = "disabled"; |
| 675 |
}; |
| 676 |
}; |
| 677 |
|
| 678 |
epit1: epit@20d0000 { |
| 679 |
reg = <0x020d0000 0x4000>; |
| 680 |
interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>; |
| 681 |
}; |
| 682 |
|
| 683 |
epit2: epit@20d4000 { |
| 684 |
reg = <0x020d4000 0x4000>; |
| 685 |
interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>; |
| 686 |
}; |
| 687 |
|
| 688 |
src: reset-controller@20d8000 { |
| 689 |
compatible = "fsl,imx6sl-src", "fsl,imx51-src"; |
| 690 |
reg = <0x020d8000 0x4000>; |
| 691 |
interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>, |
| 692 |
<0 96 IRQ_TYPE_LEVEL_HIGH>; |
| 693 |
#reset-cells = <1>; |
| 694 |
}; |
| 695 |
|
| 696 |
gpc: gpc@20dc000 { |
| 697 |
compatible = "fsl,imx6sl-gpc", "fsl,imx6q-gpc"; |
| 698 |
reg = <0x020dc000 0x4000>; |
| 699 |
interrupt-controller; |
| 700 |
#interrupt-cells = <3>; |
| 701 |
interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>; |
| 702 |
interrupt-parent = <&intc>; |
| 703 |
clocks = <&clks IMX6SL_CLK_IPG>; |
| 704 |
clock-names = "ipg"; |
| 705 |
|
| 706 |
pgc { |
| 707 |
#address-cells = <1>; |
| 708 |
#size-cells = <0>; |
| 709 |
|
| 710 |
power-domain@0 { |
| 711 |
reg = <0>; |
| 712 |
#power-domain-cells = <0>; |
| 713 |
}; |
| 714 |
|
| 715 |
pd_pu: power-domain@1 { |
| 716 |
reg = <1>; |
| 717 |
#power-domain-cells = <0>; |
| 718 |
power-supply = <®_pu>; |
| 719 |
clocks = <&clks IMX6SL_CLK_GPU2D_OVG>, |
| 720 |
<&clks IMX6SL_CLK_GPU2D_PODF>; |
| 721 |
}; |
| 722 |
|
| 723 |
pd_disp: power-domain@2 { |
| 724 |
reg = <2>; |
| 725 |
#power-domain-cells = <0>; |
| 726 |
clocks = <&clks IMX6SL_CLK_LCDIF_AXI>, |
| 727 |
<&clks IMX6SL_CLK_LCDIF_PIX>, |
| 728 |
<&clks IMX6SL_CLK_EPDC_AXI>, |
| 729 |
<&clks IMX6SL_CLK_EPDC_PIX>, |
| 730 |
<&clks IMX6SL_CLK_PXP_AXI>; |
| 731 |
}; |
| 732 |
}; |
| 733 |
}; |
| 734 |
|
| 735 |
gpr: iomuxc-gpr@20e0000 { |
| 736 |
compatible = "fsl,imx6sl-iomuxc-gpr", |
| 737 |
"fsl,imx6q-iomuxc-gpr", "syscon"; |
| 738 |
reg = <0x020e0000 0x38>; |
| 739 |
}; |
| 740 |
|
| 741 |
iomuxc: pinctrl@20e0000 { |
| 742 |
compatible = "fsl,imx6sl-iomuxc"; |
| 743 |
reg = <0x020e0000 0x4000>; |
| 744 |
}; |
| 745 |
|
| 746 |
csi: csi@20e4000 { |
| 747 |
reg = <0x020e4000 0x4000>; |
| 748 |
interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; |
| 749 |
}; |
| 750 |
|
| 751 |
spdc: spdc@20e8000 { |
| 752 |
reg = <0x020e8000 0x4000>; |
| 753 |
interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; |
| 754 |
}; |
| 755 |
|
| 756 |
sdma: dma-controller@20ec000 { |
| 757 |
compatible = "fsl,imx6sl-sdma", "fsl,imx6q-sdma"; |
| 758 |
reg = <0x020ec000 0x4000>; |
| 759 |
interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>; |
| 760 |
clocks = <&clks IMX6SL_CLK_SDMA>, |
| 761 |
<&clks IMX6SL_CLK_AHB>; |
| 762 |
clock-names = "ipg", "ahb"; |
| 763 |
#dma-cells = <3>; |
| 764 |
/* imx6sl reuses imx6q sdma firmware */ |
| 765 |
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; |
| 766 |
}; |
| 767 |
|
| 768 |
pxp: pxp@20f0000 { |
| 769 |
reg = <0x020f0000 0x4000>; |
| 770 |
interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>; |
| 771 |
}; |
| 772 |
|
| 773 |
epdc: epdc@20f4000 { |
| 774 |
reg = <0x020f4000 0x4000>; |
| 775 |
interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>; |
| 776 |
}; |
| 777 |
|
| 778 |
lcdif: lcdif@20f8000 { |
| 779 |
compatible = "fsl,imx6sl-lcdif", "fsl,imx6sx-lcdif"; |
| 780 |
reg = <0x020f8000 0x4000>; |
| 781 |
interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; |
| 782 |
clocks = <&clks IMX6SL_CLK_LCDIF_PIX>, |
| 783 |
<&clks IMX6SL_CLK_LCDIF_AXI>, |
| 784 |
<&clks IMX6SL_CLK_DUMMY>; |
| 785 |
clock-names = "pix", "axi", "disp_axi"; |
| 786 |
status = "disabled"; |
| 787 |
power-domains = <&pd_disp>; |
| 788 |
}; |
| 789 |
|
| 790 |
dcp: crypto@20fc000 { |
| 791 |
compatible = "fsl,imx6sl-dcp", "fsl,imx28-dcp"; |
| 792 |
reg = <0x020fc000 0x4000>; |
| 793 |
interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>, |
| 794 |
<0 100 IRQ_TYPE_LEVEL_HIGH>, |
| 795 |
<0 101 IRQ_TYPE_LEVEL_HIGH>; |
| 796 |
}; |
| 797 |
}; |
| 798 |
|
| 799 |
aips2: bus@2100000 { |
| 800 |
compatible = "fsl,aips-bus", "simple-bus"; |
| 801 |
#address-cells = <1>; |
| 802 |
#size-cells = <1>; |
| 803 |
reg = <0x02100000 0x100000>; |
| 804 |
ranges; |
| 805 |
|
| 806 |
usbotg1: usb@2184000 { |
| 807 |
compatible = "fsl,imx6sl-usb", "fsl,imx27-usb"; |
| 808 |
reg = <0x02184000 0x200>; |
| 809 |
interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>; |
| 810 |
clocks = <&clks IMX6SL_CLK_USBOH3>; |
| 811 |
fsl,usbphy = <&usbphy1>; |
| 812 |
fsl,usbmisc = <&usbmisc 0>; |
| 813 |
ahb-burst-config = <0x0>; |
| 814 |
tx-burst-size-dword = <0x10>; |
| 815 |
rx-burst-size-dword = <0x10>; |
| 816 |
status = "disabled"; |
| 817 |
}; |
| 818 |
|
| 819 |
usbotg2: usb@2184200 { |
| 820 |
compatible = "fsl,imx6sl-usb", "fsl,imx27-usb"; |
| 821 |
reg = <0x02184200 0x200>; |
| 822 |
interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>; |
| 823 |
clocks = <&clks IMX6SL_CLK_USBOH3>; |
| 824 |
fsl,usbphy = <&usbphy2>; |
| 825 |
fsl,usbmisc = <&usbmisc 1>; |
| 826 |
ahb-burst-config = <0x0>; |
| 827 |
tx-burst-size-dword = <0x10>; |
| 828 |
rx-burst-size-dword = <0x10>; |
| 829 |
status = "disabled"; |
| 830 |
}; |
| 831 |
|
| 832 |
usbh: usb@2184400 { |
| 833 |
compatible = "fsl,imx6sl-usb", "fsl,imx27-usb"; |
| 834 |
reg = <0x02184400 0x200>; |
| 835 |
interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>; |
| 836 |
clocks = <&clks IMX6SL_CLK_USBOH3>; |
| 837 |
fsl,usbphy = <&usbphynop1>; |
| 838 |
phy_type = "hsic"; |
| 839 |
fsl,usbmisc = <&usbmisc 2>; |
| 840 |
dr_mode = "host"; |
| 841 |
ahb-burst-config = <0x0>; |
| 842 |
tx-burst-size-dword = <0x10>; |
| 843 |
rx-burst-size-dword = <0x10>; |
| 844 |
status = "disabled"; |
| 845 |
}; |
| 846 |
|
| 847 |
usbmisc: usbmisc@2184800 { |
| 848 |
#index-cells = <1>; |
| 849 |
compatible = "fsl,imx6sl-usbmisc", "fsl,imx6q-usbmisc"; |
| 850 |
reg = <0x02184800 0x200>; |
| 851 |
clocks = <&clks IMX6SL_CLK_USBOH3>; |
| 852 |
}; |
| 853 |
|
| 854 |
fec: ethernet@2188000 { |
| 855 |
compatible = "fsl,imx6sl-fec", "fsl,imx25-fec"; |
| 856 |
reg = <0x02188000 0x4000>; |
| 857 |
interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>; |
| 858 |
clocks = <&clks IMX6SL_CLK_ENET>, |
| 859 |
<&clks IMX6SL_CLK_ENET_REF>; |
| 860 |
clock-names = "ipg", "ahb"; |
| 861 |
status = "disabled"; |
| 862 |
}; |
| 863 |
|
| 864 |
usdhc1: mmc@2190000 { |
| 865 |
compatible = "fsl,imx6sl-usdhc"; |
| 866 |
reg = <0x02190000 0x4000>; |
| 867 |
interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; |
| 868 |
clocks = <&clks IMX6SL_CLK_USDHC1>, |
| 869 |
<&clks IMX6SL_CLK_USDHC1>, |
| 870 |
<&clks IMX6SL_CLK_USDHC1>; |
| 871 |
clock-names = "ipg", "ahb", "per"; |
| 872 |
bus-width = <4>; |
| 873 |
status = "disabled"; |
| 874 |
}; |
| 875 |
|
| 876 |
usdhc2: mmc@2194000 { |
| 877 |
compatible = "fsl,imx6sl-usdhc"; |
| 878 |
reg = <0x02194000 0x4000>; |
| 879 |
interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; |
| 880 |
clocks = <&clks IMX6SL_CLK_USDHC2>, |
| 881 |
<&clks IMX6SL_CLK_USDHC2>, |
| 882 |
<&clks IMX6SL_CLK_USDHC2>; |
| 883 |
clock-names = "ipg", "ahb", "per"; |
| 884 |
bus-width = <4>; |
| 885 |
status = "disabled"; |
| 886 |
}; |
| 887 |
|
| 888 |
usdhc3: mmc@2198000 { |
| 889 |
compatible = "fsl,imx6sl-usdhc"; |
| 890 |
reg = <0x02198000 0x4000>; |
| 891 |
interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; |
| 892 |
clocks = <&clks IMX6SL_CLK_USDHC3>, |
| 893 |
<&clks IMX6SL_CLK_USDHC3>, |
| 894 |
<&clks IMX6SL_CLK_USDHC3>; |
| 895 |
clock-names = "ipg", "ahb", "per"; |
| 896 |
bus-width = <4>; |
| 897 |
status = "disabled"; |
| 898 |
}; |
| 899 |
|
| 900 |
usdhc4: mmc@219c000 { |
| 901 |
compatible = "fsl,imx6sl-usdhc"; |
| 902 |
reg = <0x0219c000 0x4000>; |
| 903 |
interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; |
| 904 |
clocks = <&clks IMX6SL_CLK_USDHC4>, |
| 905 |
<&clks IMX6SL_CLK_USDHC4>, |
| 906 |
<&clks IMX6SL_CLK_USDHC4>; |
| 907 |
clock-names = "ipg", "ahb", "per"; |
| 908 |
bus-width = <4>; |
| 909 |
status = "disabled"; |
| 910 |
}; |
| 911 |
|
| 912 |
i2c1: i2c@21a0000 { |
| 913 |
#address-cells = <1>; |
| 914 |
#size-cells = <0>; |
| 915 |
compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c"; |
| 916 |
reg = <0x021a0000 0x4000>; |
| 917 |
interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>; |
| 918 |
clocks = <&clks IMX6SL_CLK_I2C1>; |
| 919 |
status = "disabled"; |
| 920 |
}; |
| 921 |
|
| 922 |
i2c2: i2c@21a4000 { |
| 923 |
#address-cells = <1>; |
| 924 |
#size-cells = <0>; |
| 925 |
compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c"; |
| 926 |
reg = <0x021a4000 0x4000>; |
| 927 |
interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>; |
| 928 |
clocks = <&clks IMX6SL_CLK_I2C2>; |
| 929 |
status = "disabled"; |
| 930 |
}; |
| 931 |
|
| 932 |
i2c3: i2c@21a8000 { |
| 933 |
#address-cells = <1>; |
| 934 |
#size-cells = <0>; |
| 935 |
compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c"; |
| 936 |
reg = <0x021a8000 0x4000>; |
| 937 |
interrupts = <0 38 IRQ_TYPE_LEVEL_HIGH>; |
| 938 |
clocks = <&clks IMX6SL_CLK_I2C3>; |
| 939 |
status = "disabled"; |
| 940 |
}; |
| 941 |
|
| 942 |
memory-controller@21b0000 { |
| 943 |
compatible = "fsl,imx6sl-mmdc", "fsl,imx6q-mmdc"; |
| 944 |
reg = <0x021b0000 0x4000>; |
| 945 |
clocks = <&clks IMX6SL_CLK_MMDC_P0_IPG>; |
| 946 |
}; |
| 947 |
|
| 948 |
rngb: rngb@21b4000 { |
| 949 |
compatible = "fsl,imx6sl-rngb", "fsl,imx25-rngb"; |
| 950 |
reg = <0x021b4000 0x4000>; |
| 951 |
interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; |
| 952 |
clocks = <&clks IMX6SL_CLK_DUMMY>; |
| 953 |
}; |
| 954 |
|
| 955 |
weim: memory-controller@21b8000 { |
| 956 |
#address-cells = <2>; |
| 957 |
#size-cells = <1>; |
| 958 |
reg = <0x021b8000 0x4000>; |
| 959 |
interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; |
| 960 |
fsl,weim-cs-gpr = <&gpr>; |
| 961 |
status = "disabled"; |
| 962 |
}; |
| 963 |
|
| 964 |
ocotp: efuse@21bc000 { |
| 965 |
compatible = "fsl,imx6sl-ocotp", "syscon"; |
| 966 |
reg = <0x021bc000 0x4000>; |
| 967 |
clocks = <&clks IMX6SL_CLK_OCOTP>; |
| 968 |
#address-cells = <1>; |
| 969 |
#size-cells = <1>; |
| 970 |
|
| 971 |
cpu_speed_grade: speed-grade@10 { |
| 972 |
reg = <0x10 4>; |
| 973 |
}; |
| 974 |
|
| 975 |
tempmon_calib: calib@38 { |
| 976 |
reg = <0x38 4>; |
| 977 |
}; |
| 978 |
|
| 979 |
tempmon_temp_grade: temp-grade@20 { |
| 980 |
reg = <0x20 4>; |
| 981 |
}; |
| 982 |
}; |
| 983 |
|
| 984 |
audmux: audmux@21d8000 { |
| 985 |
compatible = "fsl,imx6sl-audmux", "fsl,imx31-audmux"; |
| 986 |
reg = <0x021d8000 0x4000>; |
| 987 |
status = "disabled"; |
| 988 |
}; |
| 989 |
}; |
| 990 |
|
| 991 |
gpu_2d: gpu@2200000 { |
| 992 |
compatible = "vivante,gc"; |
| 993 |
reg = <0x02200000 0x4000>; |
| 994 |
interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; |
| 995 |
clocks = <&clks IMX6SL_CLK_MMDC_ROOT>, |
| 996 |
<&clks IMX6SL_CLK_GPU2D_OVG>; |
| 997 |
clock-names = "bus", "core"; |
| 998 |
power-domains = <&pd_pu>; |
| 999 |
}; |
| 1000 |
|
| 1001 |
gpu_vg: gpu@2204000 { |
| 1002 |
compatible = "vivante,gc"; |
| 1003 |
reg = <0x02204000 0x4000>; |
| 1004 |
interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; |
| 1005 |
clocks = <&clks IMX6SL_CLK_MMDC_ROOT>, |
| 1006 |
<&clks IMX6SL_CLK_GPU2D_OVG>; |
| 1007 |
clock-names = "bus", "core"; |
| 1008 |
power-domains = <&pd_pu>; |
| 1009 |
}; |
| 1010 |
}; |
| 1011 |
}; |