| 1 |
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) |
| 2 |
/* |
| 3 |
* Copyright 2018-2022 TQ-Systems GmbH |
| 4 |
* Author: Markus Niebel <[email protected]> |
| 5 |
*/ |
| 6 |
|
| 7 |
/* |
| 8 |
* Common for |
| 9 |
* - TQMa6ULx |
| 10 |
* - TQMa6ULxL |
| 11 |
* - TQMa6ULLx |
| 12 |
* - TQMa6ULLxL |
| 13 |
*/ |
| 14 |
|
| 15 |
/ { |
| 16 |
memory@80000000 { |
| 17 |
device_type = "memory"; |
| 18 |
reg = <0x80000000 0x10000000>; |
| 19 |
}; |
| 20 |
}; |
| 21 |
|
| 22 |
&i2c4 { |
| 23 |
clock-frequency = <100000>; |
| 24 |
pinctrl-names = "default", "gpio"; |
| 25 |
pinctrl-0 = <&pinctrl_i2c4>; |
| 26 |
pinctrl-1 = <&pinctrl_i2c4_recovery>; |
| 27 |
scl-gpios = <&gpio1 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 28 |
sda-gpios = <&gpio1 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 29 |
status = "okay"; |
| 30 |
|
| 31 |
pfuze3000: pmic@8 { |
| 32 |
compatible = "fsl,pfuze3000"; |
| 33 |
reg = <0x08>; |
| 34 |
|
| 35 |
regulators { |
| 36 |
reg_sw1a: sw1a { |
| 37 |
regulator-min-microvolt = <700000>; |
| 38 |
regulator-max-microvolt = <3300000>; |
| 39 |
regulator-boot-on; |
| 40 |
regulator-ramp-delay = <6250>; |
| 41 |
/* not used */ |
| 42 |
}; |
| 43 |
|
| 44 |
reg_sw1b_core: sw1b { |
| 45 |
regulator-min-microvolt = <700000>; |
| 46 |
regulator-max-microvolt = <1475000>; |
| 47 |
regulator-boot-on; |
| 48 |
regulator-always-on; |
| 49 |
regulator-ramp-delay = <6250>; |
| 50 |
}; |
| 51 |
|
| 52 |
reg_sw2: sw2 { |
| 53 |
regulator-min-microvolt = <2500000>; |
| 54 |
regulator-max-microvolt = <3300000>; |
| 55 |
}; |
| 56 |
|
| 57 |
reg_sw3_ddr: sw3 { |
| 58 |
regulator-min-microvolt = <900000>; |
| 59 |
regulator-max-microvolt = <1650000>; |
| 60 |
regulator-boot-on; |
| 61 |
regulator-always-on; |
| 62 |
}; |
| 63 |
|
| 64 |
reg_swbst: swbst { |
| 65 |
regulator-min-microvolt = <5000000>; |
| 66 |
regulator-max-microvolt = <5150000>; |
| 67 |
/* not used */ |
| 68 |
}; |
| 69 |
|
| 70 |
reg_snvs_3v0: vsnvs { |
| 71 |
regulator-min-microvolt = <1000000>; |
| 72 |
regulator-max-microvolt = <3000000>; |
| 73 |
regulator-boot-on; |
| 74 |
regulator-always-on; |
| 75 |
}; |
| 76 |
|
| 77 |
reg_vrefddr: vrefddr { |
| 78 |
regulator-boot-on; |
| 79 |
regulator-always-on; |
| 80 |
}; |
| 81 |
|
| 82 |
reg_vccsd: vccsd { |
| 83 |
regulator-min-microvolt = <2850000>; |
| 84 |
regulator-max-microvolt = <3300000>; |
| 85 |
}; |
| 86 |
|
| 87 |
reg_v33_3v3: v33 { |
| 88 |
regulator-min-microvolt = <2850000>; |
| 89 |
regulator-max-microvolt = <3300000>; |
| 90 |
regulator-always-on; |
| 91 |
}; |
| 92 |
|
| 93 |
reg_vldo1_3v3: vldo1 { |
| 94 |
regulator-min-microvolt = <1800000>; |
| 95 |
regulator-max-microvolt = <3300000>; |
| 96 |
/* not used */ |
| 97 |
}; |
| 98 |
|
| 99 |
reg_vldo2: vldo2 { |
| 100 |
regulator-min-microvolt = <800000>; |
| 101 |
regulator-max-microvolt = <1550000>; |
| 102 |
/* not used */ |
| 103 |
}; |
| 104 |
|
| 105 |
reg_vldo3: vldo3 { |
| 106 |
regulator-min-microvolt = <1800000>; |
| 107 |
regulator-max-microvolt = <3300000>; |
| 108 |
/* not used */ |
| 109 |
}; |
| 110 |
|
| 111 |
reg_vldo4: vldo4 { |
| 112 |
regulator-min-microvolt = <1800000>; |
| 113 |
regulator-max-microvolt = <1800000>; |
| 114 |
regulator-always-on; |
| 115 |
}; |
| 116 |
}; |
| 117 |
}; |
| 118 |
|
| 119 |
jc42_1a: eeprom-temperature@1a { |
| 120 |
compatible = "nxp,se97b", "jedec,jc-42.4-temp"; |
| 121 |
reg = <0x1a>; |
| 122 |
}; |
| 123 |
|
| 124 |
m24c64_50: eeprom@50 { |
| 125 |
compatible = "atmel,24c64"; |
| 126 |
reg = <0x50>; |
| 127 |
pagesize = <32>; |
| 128 |
}; |
| 129 |
|
| 130 |
m24c02_52: eeprom@52 { |
| 131 |
compatible = "nxp,se97b", "atmel,24c02"; |
| 132 |
reg = <0x52>; |
| 133 |
pagesize = <16>; |
| 134 |
read-only; |
| 135 |
}; |
| 136 |
|
| 137 |
rtc0: rtc@68 { |
| 138 |
compatible = "dallas,ds1339"; |
| 139 |
reg = <0x68>; |
| 140 |
}; |
| 141 |
}; |
| 142 |
|
| 143 |
&gpio4 { |
| 144 |
pinctrl-names = "default"; |
| 145 |
pinctrl-0 = <&pinctrl_pmic>; |
| 146 |
|
| 147 |
/* |
| 148 |
* PMIC & temperature sensor IRQ |
| 149 |
* Both do currently not use IRQ |
| 150 |
* potentially dangerous if used on baseboard |
| 151 |
*/ |
| 152 |
pmic-int-hog { |
| 153 |
gpio-hog; |
| 154 |
gpios = <24 0>; |
| 155 |
input; |
| 156 |
}; |
| 157 |
}; |
| 158 |
|
| 159 |
&qspi { |
| 160 |
pinctrl-names = "default"; |
| 161 |
pinctrl-0 = <&pinctrl_qspi>; |
| 162 |
status = "okay"; |
| 163 |
|
| 164 |
flash0: flash@0 { |
| 165 |
compatible = "jedec,spi-nor"; |
| 166 |
reg = <0>; |
| 167 |
spi-max-frequency = <33000000>; |
| 168 |
spi-rx-bus-width = <4>; |
| 169 |
spi-tx-bus-width = <1>; |
| 170 |
vcc-supply = <®_vldo4>; |
| 171 |
|
| 172 |
partitions { |
| 173 |
compatible = "fixed-partitions"; |
| 174 |
#address-cells = <1>; |
| 175 |
#size-cells = <1>; |
| 176 |
}; |
| 177 |
}; |
| 178 |
}; |
| 179 |
|
| 180 |
/* eMMC */ |
| 181 |
&usdhc2 { |
| 182 |
pinctrl-names = "default", "state_100mhz" , "state_200mhz"; |
| 183 |
pinctrl-0 = <&pinctrl_usdhc2>; |
| 184 |
pinctrl-1 = <&pinctrl_usdhc2_100mhz>; |
| 185 |
pinctrl-2 = <&pinctrl_usdhc2_200mhz>; |
| 186 |
|
| 187 |
bus-width = <8>; |
| 188 |
disable-wp; |
| 189 |
non-removable; |
| 190 |
no-sdio; |
| 191 |
no-sd; |
| 192 |
status = "okay"; |
| 193 |
}; |
| 194 |
|
| 195 |
&iomuxc { |
| 196 |
pinctrl_i2c4: i2c4grp { |
| 197 |
fsl,pins = < |
| 198 |
MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x4001b8b0 |
| 199 |
MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x4001b8b0 |
| 200 |
>; |
| 201 |
}; |
| 202 |
|
| 203 |
pinctrl_i2c4_recovery: i2c4recoverygrp { |
| 204 |
fsl,pins = < |
| 205 |
MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x4001b8b0 |
| 206 |
MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21 0x4001b8b0 |
| 207 |
>; |
| 208 |
}; |
| 209 |
|
| 210 |
pinctrl_pmic: pmicgrp { |
| 211 |
fsl,pins = < |
| 212 |
/* PMIC irq */ |
| 213 |
MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x1b099 |
| 214 |
>; |
| 215 |
}; |
| 216 |
}; |