| 1 |
// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause |
| 2 |
/* |
| 3 |
* Copyright (C) 2023 DH electronics GmbH |
| 4 |
* |
| 5 |
* DHCOM iMX6ULL variant: |
| 6 |
* DHCM-iMX6ULL-C080-R051-F0409-SPI-E2-CAN2-RTC-WBT-ADC-I-01D2 |
| 7 |
* DHCOR PCB number: 578-200 or newer |
| 8 |
* DHCOM PCB number: 579-200 or newer |
| 9 |
* PDK2 PCB number: 516-400 or newer |
| 10 |
*/ |
| 11 |
/dts-v1/; |
| 12 |
|
| 13 |
#include "imx6ull-dhcom-som.dtsi" |
| 14 |
|
| 15 |
/ { |
| 16 |
model = "DH electronics i.MX6ULL DHCOM on Premium Developer Kit (2)"; |
| 17 |
compatible = "dh,imx6ull-dhcom-pdk2", "dh,imx6ull-dhcom-som", |
| 18 |
"dh,imx6ull-dhcor-som", "fsl,imx6ull"; |
| 19 |
|
| 20 |
clk_ext_audio_codec: clock-codec { |
| 21 |
compatible = "fixed-clock"; |
| 22 |
#clock-cells = <0>; |
| 23 |
clock-frequency = <24000000>; |
| 24 |
}; |
| 25 |
|
| 26 |
display_bl: display-bl { |
| 27 |
compatible = "pwm-backlight"; |
| 28 |
brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>; |
| 29 |
default-brightness-level = <8>; |
| 30 |
enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>; /* GPIO G */ |
| 31 |
power-supply = <®_panel_3v3>; |
| 32 |
pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>; |
| 33 |
}; |
| 34 |
|
| 35 |
gpio-keys { |
| 36 |
compatible = "gpio-keys"; |
| 37 |
|
| 38 |
button-0 { |
| 39 |
gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; /* GPIO A */ |
| 40 |
label = "TA1-GPIO-A"; |
| 41 |
linux,code = <KEY_A>; |
| 42 |
wakeup-source; |
| 43 |
}; |
| 44 |
|
| 45 |
button-1 { |
| 46 |
gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; /* GPIO B */ |
| 47 |
label = "TA2-GPIO-B"; |
| 48 |
linux,code = <KEY_B>; |
| 49 |
wakeup-source; |
| 50 |
}; |
| 51 |
|
| 52 |
button-2 { |
| 53 |
gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; /* GPIO C */ |
| 54 |
label = "TA3-GPIO-C"; |
| 55 |
linux,code = <KEY_C>; |
| 56 |
wakeup-source; |
| 57 |
}; |
| 58 |
|
| 59 |
button-3 { |
| 60 |
gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; /* GPIO D */ |
| 61 |
label = "TA4-GPIO-D"; |
| 62 |
linux,code = <KEY_D>; |
| 63 |
wakeup-source; |
| 64 |
}; |
| 65 |
}; |
| 66 |
|
| 67 |
led: led { |
| 68 |
compatible = "gpio-leds"; |
| 69 |
|
| 70 |
/* |
| 71 |
* Disable PDK2 LED5, because GPIO E is |
| 72 |
* already used as touch interrupt. |
| 73 |
*/ |
| 74 |
led-0 { |
| 75 |
color = <LED_COLOR_ID_GREEN>; |
| 76 |
default-state = "off"; |
| 77 |
function = LED_FUNCTION_INDICATOR; |
| 78 |
function-enumerator = <5>; /* PDK2 LED5 */ |
| 79 |
gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; /* GPIO E */ |
| 80 |
status = "disabled"; |
| 81 |
}; |
| 82 |
|
| 83 |
led-1 { |
| 84 |
color = <LED_COLOR_ID_GREEN>; |
| 85 |
default-state = "off"; |
| 86 |
function = LED_FUNCTION_INDICATOR; |
| 87 |
function-enumerator = <6>; /* PDK2 LED6 */ |
| 88 |
gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>; /* GPIO F */ |
| 89 |
}; |
| 90 |
|
| 91 |
/* |
| 92 |
* Disable PDK2 LED7, because GPIO H is |
| 93 |
* already used for WiFi pin WL_REG_ON. |
| 94 |
*/ |
| 95 |
led-2 { |
| 96 |
color = <LED_COLOR_ID_GREEN>; |
| 97 |
default-state = "off"; |
| 98 |
function = LED_FUNCTION_INDICATOR; |
| 99 |
function-enumerator = <7>; /* PDK2 LED7 */ |
| 100 |
gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; /* GPIO H */ |
| 101 |
status = "disabled"; |
| 102 |
}; |
| 103 |
|
| 104 |
/* |
| 105 |
* Disable PDK2 LED8, because GPIO I is |
| 106 |
* already used for BT pin BT_REG_ON. |
| 107 |
*/ |
| 108 |
led-3 { |
| 109 |
color = <LED_COLOR_ID_GREEN>; |
| 110 |
default-state = "off"; |
| 111 |
function = LED_FUNCTION_INDICATOR; |
| 112 |
function-enumerator = <8>; /* PDK2 LED8 */ |
| 113 |
gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; /* GPIO I */ |
| 114 |
status = "disabled"; |
| 115 |
}; |
| 116 |
}; |
| 117 |
|
| 118 |
panel { |
| 119 |
compatible = "edt,etm0700g0edh6"; |
| 120 |
backlight = <&display_bl>; |
| 121 |
power-supply = <®_panel_3v3>; |
| 122 |
|
| 123 |
port { |
| 124 |
lcd_panel_in: endpoint { |
| 125 |
remote-endpoint = <&lcd_display_out>; |
| 126 |
}; |
| 127 |
}; |
| 128 |
}; |
| 129 |
|
| 130 |
/* Filtered supply voltage */ |
| 131 |
reg_pdk2_24v: regulator-pdk2-24v { |
| 132 |
compatible = "regulator-fixed"; |
| 133 |
regulator-always-on; |
| 134 |
regulator-max-microvolt = <24000000>; |
| 135 |
regulator-min-microvolt = <24000000>; |
| 136 |
regulator-name = "24V_PDK2"; |
| 137 |
}; |
| 138 |
|
| 139 |
/* PDK2 U35 */ |
| 140 |
reg_pdk2_3v3: regulator-pdk2-3v3 { |
| 141 |
compatible = "regulator-fixed"; |
| 142 |
regulator-always-on; |
| 143 |
regulator-min-microvolt = <3300000>; |
| 144 |
regulator-max-microvolt = <3300000>; |
| 145 |
regulator-name = "3V3_PDK2"; |
| 146 |
vin-supply = <®_pdk2_24v>; |
| 147 |
}; |
| 148 |
|
| 149 |
/* 560-200 U1 */ |
| 150 |
reg_panel_3v3: regulator-panel-3v3 { |
| 151 |
compatible = "regulator-fixed"; |
| 152 |
regulator-always-on; |
| 153 |
regulator-min-microvolt = <3300000>; |
| 154 |
regulator-max-microvolt = <3300000>; |
| 155 |
regulator-name = "3V3_PANEL"; |
| 156 |
vin-supply = <®_pdk2_24v>; |
| 157 |
}; |
| 158 |
|
| 159 |
sound { |
| 160 |
compatible = "simple-audio-card"; |
| 161 |
simple-audio-card,bitclock-master = <&dailink_master>; |
| 162 |
simple-audio-card,format = "i2s"; |
| 163 |
simple-audio-card,frame-master = <&dailink_master>; |
| 164 |
simple-audio-card,name = "sgtl5000"; |
| 165 |
simple-audio-card,routing = |
| 166 |
"MIC_IN", "Mic Jack", |
| 167 |
"Mic Jack", "Mic Bias", |
| 168 |
"LINE_IN", "Line In Jack", |
| 169 |
"Headphone Jack", "HP_OUT"; |
| 170 |
simple-audio-card,widgets = |
| 171 |
"Microphone", "Mic Jack", |
| 172 |
"Line", "Line In Jack", |
| 173 |
"Headphone", "Headphone Jack"; |
| 174 |
|
| 175 |
simple-audio-card,cpu { |
| 176 |
sound-dai = <&sai2>; |
| 177 |
}; |
| 178 |
|
| 179 |
dailink_master: simple-audio-card,codec { |
| 180 |
clocks = <&clk_ext_audio_codec>; |
| 181 |
sound-dai = <&sgtl5000>; |
| 182 |
}; |
| 183 |
}; |
| 184 |
}; |
| 185 |
|
| 186 |
/* DHCOM I2C1 */ |
| 187 |
&i2c2 { |
| 188 |
sgtl5000: audio-codec@a { |
| 189 |
compatible = "fsl,sgtl5000"; |
| 190 |
reg = <0x0a>; |
| 191 |
#sound-dai-cells = <0>; |
| 192 |
clocks = <&clk_ext_audio_codec>; |
| 193 |
VDDA-supply = <®_pdk2_3v3>; |
| 194 |
VDDIO-supply = <®_pdk2_3v3>; |
| 195 |
}; |
| 196 |
|
| 197 |
touchscreen@38 { |
| 198 |
compatible = "edt,edt-ft5406"; |
| 199 |
reg = <0x38>; |
| 200 |
interrupt-parent = <&gpio5>; |
| 201 |
interrupts = <4 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */ |
| 202 |
vcc-supply = <®_panel_3v3>; |
| 203 |
}; |
| 204 |
}; |
| 205 |
|
| 206 |
&lcdif { |
| 207 |
status = "okay"; |
| 208 |
|
| 209 |
port { |
| 210 |
lcd_display_out: endpoint { |
| 211 |
remote-endpoint = <&lcd_panel_in>; |
| 212 |
}; |
| 213 |
}; |
| 214 |
}; |
| 215 |
|
| 216 |
&pwm1 { |
| 217 |
status = "okay"; |
| 218 |
}; |
| 219 |
|
| 220 |
&sai2 { |
| 221 |
status = "okay"; |
| 222 |
}; |