| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
| 2 |
/* |
| 3 |
* Copyright 2014-2022 Toradex |
| 4 |
* Copyright 2012 Freescale Semiconductor, Inc. |
| 5 |
* Copyright 2011 Linaro Ltd. |
| 6 |
*/ |
| 7 |
|
| 8 |
/dts-v1/; |
| 9 |
|
| 10 |
#include <dt-bindings/gpio/gpio.h> |
| 11 |
#include <dt-bindings/input/input.h> |
| 12 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 13 |
#include "imx6q.dtsi" |
| 14 |
#include "imx6qdl-apalis.dtsi" |
| 15 |
|
| 16 |
/ { |
| 17 |
model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.2"; |
| 18 |
compatible = "toradex,apalis_imx6q-ixora-v1.2", "toradex,apalis_imx6q", |
| 19 |
"fsl,imx6q"; |
| 20 |
|
| 21 |
aliases { |
| 22 |
i2c0 = &i2c1; |
| 23 |
i2c1 = &i2c3; |
| 24 |
i2c2 = &i2c2; |
| 25 |
rtc0 = &rtc_i2c; |
| 26 |
rtc1 = &snvs_rtc; |
| 27 |
}; |
| 28 |
|
| 29 |
chosen { |
| 30 |
stdout-path = "serial0:115200n8"; |
| 31 |
}; |
| 32 |
|
| 33 |
leds { |
| 34 |
compatible = "gpio-leds"; |
| 35 |
|
| 36 |
pinctrl-names = "default"; |
| 37 |
pinctrl-0 = <&pinctrl_leds_ixora>; |
| 38 |
|
| 39 |
led4-green { |
| 40 |
gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; |
| 41 |
label = "LED_4_GREEN"; |
| 42 |
}; |
| 43 |
|
| 44 |
led4-red { |
| 45 |
gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; |
| 46 |
label = "LED_4_RED"; |
| 47 |
}; |
| 48 |
|
| 49 |
led5-green { |
| 50 |
gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; |
| 51 |
label = "LED_5_GREEN"; |
| 52 |
}; |
| 53 |
|
| 54 |
led5-red { |
| 55 |
gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; |
| 56 |
label = "LED_5_RED"; |
| 57 |
}; |
| 58 |
}; |
| 59 |
|
| 60 |
reg_3v3_vmmc: regulator-3v3-vmmc { |
| 61 |
compatible = "regulator-fixed"; |
| 62 |
enable-active-high; |
| 63 |
gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>; |
| 64 |
pinctrl-names = "default"; |
| 65 |
pinctrl-0 = <&pinctrl_enable_3v3_vmmc>; |
| 66 |
regulator-max-microvolt = <3300000>; |
| 67 |
regulator-min-microvolt = <3300000>; |
| 68 |
regulator-name = "3v3_vmmc"; |
| 69 |
startup-delay-us = <100>; |
| 70 |
}; |
| 71 |
|
| 72 |
reg_can1_supply: regulator-can1-supply { |
| 73 |
compatible = "regulator-fixed"; |
| 74 |
enable-active-high; |
| 75 |
gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>; |
| 76 |
pinctrl-names = "default"; |
| 77 |
pinctrl-0 = <&pinctrl_enable_can1_power>; |
| 78 |
regulator-name = "can1_supply"; |
| 79 |
startup-delay-us = <1000>; |
| 80 |
}; |
| 81 |
|
| 82 |
reg_can2_supply: regulator-can2-supply { |
| 83 |
compatible = "regulator-fixed"; |
| 84 |
enable-active-high; |
| 85 |
gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>; |
| 86 |
pinctrl-names = "default"; |
| 87 |
pinctrl-0 = <&pinctrl_enable_can2_power>; |
| 88 |
regulator-name = "can2_supply"; |
| 89 |
startup-delay-us = <1000>; |
| 90 |
}; |
| 91 |
}; |
| 92 |
|
| 93 |
&can1 { |
| 94 |
xceiver-supply = <®_can1_supply>; |
| 95 |
status = "okay"; |
| 96 |
}; |
| 97 |
|
| 98 |
&can2 { |
| 99 |
xceiver-supply = <®_can2_supply>; |
| 100 |
status = "okay"; |
| 101 |
}; |
| 102 |
|
| 103 |
&gpio1 { |
| 104 |
pinctrl-names = "default"; |
| 105 |
pinctrl-0 = <&pinctrl_uart24_forceoff>; |
| 106 |
|
| 107 |
/* |
| 108 |
* uart-2-4-on-x21-enable-hog enables the UART transceiver for Apalis |
| 109 |
* UART2 and UART3. If one wants to disable the transceiver force |
| 110 |
* the GPIO to output-low, if one wants to control the transceiver |
| 111 |
* from user space delete the hog node. |
| 112 |
*/ |
| 113 |
uart-2-4-on-x21-enable-hog { |
| 114 |
gpio-hog; |
| 115 |
gpios = <11 GPIO_ACTIVE_HIGH>; /* MXM3 180 */ |
| 116 |
output-high; |
| 117 |
}; |
| 118 |
}; |
| 119 |
|
| 120 |
/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ |
| 121 |
&i2c1 { |
| 122 |
status = "okay"; |
| 123 |
|
| 124 |
/* M41T0M6 real time clock on carrier board */ |
| 125 |
rtc_i2c: rtc@68 { |
| 126 |
compatible = "st,m41t0"; |
| 127 |
reg = <0x68>; |
| 128 |
}; |
| 129 |
|
| 130 |
eeprom: eeprom@50 { |
| 131 |
compatible = "atmel,24c02"; |
| 132 |
reg = <0x50>; |
| 133 |
pagesize = <16>; |
| 134 |
}; |
| 135 |
}; |
| 136 |
|
| 137 |
/* |
| 138 |
* I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier |
| 139 |
* board) |
| 140 |
*/ |
| 141 |
&i2c3 { |
| 142 |
status = "okay"; |
| 143 |
}; |
| 144 |
|
| 145 |
&pcie { |
| 146 |
pinctrl-names = "default"; |
| 147 |
pinctrl-0 = <&pinctrl_reset_moci>; |
| 148 |
/* active-high meaning opposite of regular PERST# active-low polarity */ |
| 149 |
reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; |
| 150 |
reset-gpio-active-high; |
| 151 |
status = "okay"; |
| 152 |
}; |
| 153 |
|
| 154 |
&pwm1 { |
| 155 |
status = "okay"; |
| 156 |
}; |
| 157 |
|
| 158 |
&pwm2 { |
| 159 |
status = "okay"; |
| 160 |
}; |
| 161 |
|
| 162 |
&pwm3 { |
| 163 |
status = "okay"; |
| 164 |
}; |
| 165 |
|
| 166 |
&pwm4 { |
| 167 |
status = "okay"; |
| 168 |
}; |
| 169 |
|
| 170 |
®_usb_host_vbus { |
| 171 |
status = "okay"; |
| 172 |
}; |
| 173 |
|
| 174 |
®_usb_otg_vbus { |
| 175 |
status = "okay"; |
| 176 |
}; |
| 177 |
|
| 178 |
&sata { |
| 179 |
status = "okay"; |
| 180 |
}; |
| 181 |
|
| 182 |
&sound_spdif { |
| 183 |
status = "okay"; |
| 184 |
}; |
| 185 |
|
| 186 |
&spdif { |
| 187 |
status = "okay"; |
| 188 |
}; |
| 189 |
|
| 190 |
&uart1 { |
| 191 |
status = "okay"; |
| 192 |
}; |
| 193 |
|
| 194 |
&uart2 { |
| 195 |
status = "okay"; |
| 196 |
}; |
| 197 |
|
| 198 |
&uart4 { |
| 199 |
status = "okay"; |
| 200 |
}; |
| 201 |
|
| 202 |
&uart5 { |
| 203 |
status = "okay"; |
| 204 |
}; |
| 205 |
|
| 206 |
&usbh1 { |
| 207 |
disable-over-current; |
| 208 |
vbus-supply = <®_usb_host_vbus>; |
| 209 |
status = "okay"; |
| 210 |
}; |
| 211 |
|
| 212 |
&usbotg { |
| 213 |
disable-over-current; |
| 214 |
vbus-supply = <®_usb_otg_vbus>; |
| 215 |
status = "okay"; |
| 216 |
}; |
| 217 |
|
| 218 |
/* MMC1 */ |
| 219 |
&usdhc1 { |
| 220 |
pinctrl-names = "default", "sleep"; |
| 221 |
pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_mmc_cd>; |
| 222 |
pinctrl-1 = <&pinctrl_usdhc1_4bit_sleep &pinctrl_mmc_cd_sleep>; |
| 223 |
bus-width = <4>; |
| 224 |
cap-power-off-card; |
| 225 |
vmmc-supply = <®_3v3_vmmc>; |
| 226 |
status = "okay"; |
| 227 |
}; |
| 228 |
|
| 229 |
&iomuxc { |
| 230 |
pinctrl_enable_3v3_vmmc: enable3v3vmmcgrp { |
| 231 |
fsl,pins = < |
| 232 |
MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 |
| 233 |
>; |
| 234 |
}; |
| 235 |
|
| 236 |
pinctrl_enable_can1_power: enablecan1powergrp { |
| 237 |
fsl,pins = < |
| 238 |
MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 |
| 239 |
>; |
| 240 |
}; |
| 241 |
|
| 242 |
pinctrl_enable_can2_power: enablecan2powergrp { |
| 243 |
fsl,pins = < |
| 244 |
MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x1b0b0 |
| 245 |
>; |
| 246 |
}; |
| 247 |
|
| 248 |
pinctrl_uart24_forceoff: uart24forceoffgrp { |
| 249 |
fsl,pins = < |
| 250 |
MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x1b0b0 |
| 251 |
>; |
| 252 |
}; |
| 253 |
|
| 254 |
pinctrl_leds_ixora: ledsixoragrp { |
| 255 |
fsl,pins = < |
| 256 |
MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0 |
| 257 |
MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0 |
| 258 |
MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 |
| 259 |
MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 |
| 260 |
>; |
| 261 |
}; |
| 262 |
|
| 263 |
pinctrl_mmc_cd_sleep: mmccdslpgrp { |
| 264 |
fsl,pins = < |
| 265 |
/* MMC1 CD */ |
| 266 |
MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0 |
| 267 |
>; |
| 268 |
}; |
| 269 |
|
| 270 |
pinctrl_usdhc1_4bit_sleep: usdhc1-4bitslpgrp { |
| 271 |
fsl,pins = < |
| 272 |
MX6QDL_PAD_SD1_CMD__SD1_CMD 0x3000 |
| 273 |
MX6QDL_PAD_SD1_CLK__SD1_CLK 0x3000 |
| 274 |
MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x3000 |
| 275 |
MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x3000 |
| 276 |
MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x3000 |
| 277 |
MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x3000 |
| 278 |
>; |
| 279 |
}; |
| 280 |
}; |