| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
// |
| 3 |
// Copyright (C) 2019 Logic PD, Inc. |
| 4 |
|
| 5 |
/dts-v1/; |
| 6 |
#include "imx6q.dtsi" |
| 7 |
#include "imx6-logicpd-som.dtsi" |
| 8 |
#include "imx6-logicpd-baseboard.dtsi" |
| 9 |
|
| 10 |
/ { |
| 11 |
model = "Logic PD i.MX6QD SOM-M3"; |
| 12 |
compatible = "logicpd,imx6q-logicpd", "fsl,imx6q"; |
| 13 |
|
| 14 |
backlight: backlight-lvds { |
| 15 |
compatible = "pwm-backlight"; |
| 16 |
pwms = <&pwm3 0 20000 0>; |
| 17 |
brightness-levels = <0 4 8 16 32 64 128 255>; |
| 18 |
default-brightness-level = <6>; |
| 19 |
power-supply = <®_lcd>; |
| 20 |
}; |
| 21 |
|
| 22 |
panel-lvds0 { |
| 23 |
compatible = "okaya,rs800480t-7x0gp"; |
| 24 |
power-supply = <®_lcd_reset>; |
| 25 |
backlight = <&backlight>; |
| 26 |
|
| 27 |
port { |
| 28 |
panel_in_lvds0: endpoint { |
| 29 |
remote-endpoint = <&lvds0_out>; |
| 30 |
}; |
| 31 |
}; |
| 32 |
}; |
| 33 |
|
| 34 |
reg_lcd: regulator-lcd { |
| 35 |
pinctrl-names = "default"; |
| 36 |
pinctrl-0 = <&pinctrl_lcd_reg>; |
| 37 |
compatible = "regulator-fixed"; |
| 38 |
regulator-name = "lcd_panel_pwr"; |
| 39 |
regulator-min-microvolt = <3300000>; |
| 40 |
regulator-max-microvolt = <3300000>; |
| 41 |
gpio = <&gpio4 17 GPIO_ACTIVE_HIGH>; |
| 42 |
enable-active-high; |
| 43 |
vin-supply = <®_3v3>; |
| 44 |
startup-delay-us = <500000>; |
| 45 |
}; |
| 46 |
|
| 47 |
reg_lcd_reset: regulator-lcd-reset { |
| 48 |
pinctrl-names = "default"; |
| 49 |
pinctrl-0 = <&pinctrl_lcd_reset>; |
| 50 |
compatible = "regulator-fixed"; |
| 51 |
regulator-name = "nLCD_RESET"; |
| 52 |
regulator-min-microvolt = <3300000>; |
| 53 |
regulator-max-microvolt = <3300000>; |
| 54 |
gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; |
| 55 |
enable-active-high; |
| 56 |
vin-supply = <®_lcd>; |
| 57 |
}; |
| 58 |
}; |
| 59 |
|
| 60 |
&clks { |
| 61 |
assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, |
| 62 |
<&clks IMX6QDL_CLK_LDB_DI1_SEL>, |
| 63 |
<&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>, |
| 64 |
<&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>; |
| 65 |
assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, |
| 66 |
<&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, |
| 67 |
<&clks IMX6QDL_CLK_PLL2_PFD2_396M>, |
| 68 |
<&clks IMX6QDL_CLK_PLL2_PFD2_396M>; |
| 69 |
}; |
| 70 |
|
| 71 |
&hdmi { |
| 72 |
ddc-i2c-bus = <&i2c3>; |
| 73 |
status = "okay"; |
| 74 |
}; |
| 75 |
|
| 76 |
&i2c1 { |
| 77 |
touchscreen@26 { |
| 78 |
compatible = "ilitek,ili2117"; |
| 79 |
reg = <0x26>; |
| 80 |
pinctrl-names = "default"; |
| 81 |
pinctrl-0 = <&pinctrl_touchscreen>; |
| 82 |
interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_RISING>; |
| 83 |
}; |
| 84 |
}; |
| 85 |
|
| 86 |
&ldb { |
| 87 |
status = "okay"; |
| 88 |
|
| 89 |
lvds-channel@0 { |
| 90 |
fsl,data-mapping = "spwg"; |
| 91 |
fsl,data-width = <24>; |
| 92 |
status = "okay"; |
| 93 |
|
| 94 |
port@4 { |
| 95 |
reg = <4>; |
| 96 |
lvds0_out: endpoint { |
| 97 |
remote-endpoint = <&panel_in_lvds0>; |
| 98 |
}; |
| 99 |
}; |
| 100 |
}; |
| 101 |
|
| 102 |
}; |
| 103 |
|
| 104 |
&pwm3 { |
| 105 |
status = "okay"; |
| 106 |
}; |
| 107 |
|
| 108 |
®_hdmi { |
| 109 |
regulator-always-on; /* Without this, the level shifter on HDMI doesn't turn on */ |
| 110 |
}; |
| 111 |
|
| 112 |
&iomuxc { |
| 113 |
pinctrl_lcd_reg: lcdreggrp { |
| 114 |
fsl,pins = < |
| 115 |
MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x100b0 /* R_LCD_PANEL_PWR */ |
| 116 |
>; |
| 117 |
}; |
| 118 |
|
| 119 |
pinctrl_lcd_reset: lcdresetgrp { |
| 120 |
fsl,pins = < |
| 121 |
MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b0 /* LCD_nRESET */ |
| 122 |
>; |
| 123 |
}; |
| 124 |
|
| 125 |
pinctrl_touchscreen: touchscreengrp { |
| 126 |
fsl,pins = < |
| 127 |
MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 /* TOUCH_nPINTDAV */ |
| 128 |
>; |
| 129 |
}; |
| 130 |
}; |