| 1 |
/* |
| 2 |
* Copyright (C) 2014 Russell King |
| 3 |
* |
| 4 |
* This file is dual-licensed: you can use it either under the terms |
| 5 |
* of the GPL or the X11 license, at your option. Note that this dual |
| 6 |
* licensing only applies to this file, and not this project as a |
| 7 |
* whole. |
| 8 |
* |
| 9 |
* a) This file is free software; you can redistribute it and/or |
| 10 |
* modify it under the terms of the GNU General Public License |
| 11 |
* version 2 as published by the Free Software Foundation. |
| 12 |
* |
| 13 |
* This file is distributed in the hope that it will be useful, |
| 14 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 16 |
* GNU General Public License for more details. |
| 17 |
* |
| 18 |
* Or, alternatively, |
| 19 |
* |
| 20 |
* b) Permission is hereby granted, free of charge, to any person |
| 21 |
* obtaining a copy of this software and associated documentation |
| 22 |
* files (the "Software"), to deal in the Software without |
| 23 |
* restriction, including without limitation the rights to use, |
| 24 |
* copy, modify, merge, publish, distribute, sublicense, and/or |
| 25 |
* sell copies of the Software, and to permit persons to whom the |
| 26 |
* Software is furnished to do so, subject to the following |
| 27 |
* conditions: |
| 28 |
* |
| 29 |
* The above copyright notice and this permission notice shall be |
| 30 |
* included in all copies or substantial portions of the Software. |
| 31 |
* |
| 32 |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 33 |
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| 34 |
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 35 |
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| 36 |
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| 37 |
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| 38 |
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| 39 |
* OTHER DEALINGS IN THE SOFTWARE. |
| 40 |
*/ |
| 41 |
#include <dt-bindings/input/input.h> |
| 42 |
#include <dt-bindings/gpio/gpio.h> |
| 43 |
|
| 44 |
/ { |
| 45 |
/* Will be filled by the bootloader */ |
| 46 |
memory@10000000 { |
| 47 |
device_type = "memory"; |
| 48 |
reg = <0x10000000 0>; |
| 49 |
}; |
| 50 |
|
| 51 |
ir_recv: ir-receiver { |
| 52 |
compatible = "gpio-ir-receiver"; |
| 53 |
gpios = <&gpio3 9 1>; |
| 54 |
pinctrl-names = "default"; |
| 55 |
pinctrl-0 = <&pinctrl_cubox_i_ir>; |
| 56 |
}; |
| 57 |
|
| 58 |
led-controller { |
| 59 |
compatible = "pwm-leds"; |
| 60 |
pinctrl-names = "default"; |
| 61 |
pinctrl-0 = <&pinctrl_cubox_i_pwm1>; |
| 62 |
|
| 63 |
led-1 { |
| 64 |
active-low; |
| 65 |
label = "imx6:red:front"; |
| 66 |
max-brightness = <248>; |
| 67 |
pwms = <&pwm1 0 50000 0>; |
| 68 |
}; |
| 69 |
}; |
| 70 |
|
| 71 |
v_5v0: regulator-v-5v0 { |
| 72 |
compatible = "regulator-fixed"; |
| 73 |
regulator-always-on; |
| 74 |
regulator-max-microvolt = <5000000>; |
| 75 |
regulator-min-microvolt = <5000000>; |
| 76 |
regulator-name = "v_5v0"; |
| 77 |
}; |
| 78 |
|
| 79 |
v_usb2: regulator-v-usb2 { |
| 80 |
compatible = "regulator-fixed"; |
| 81 |
enable-active-high; |
| 82 |
gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; |
| 83 |
pinctrl-names = "default"; |
| 84 |
pinctrl-0 = <&pinctrl_cubox_i_usbh1_vbus>; |
| 85 |
regulator-max-microvolt = <5000000>; |
| 86 |
regulator-min-microvolt = <5000000>; |
| 87 |
regulator-name = "v_usb2"; |
| 88 |
vin-supply = <&v_5v0>; |
| 89 |
}; |
| 90 |
|
| 91 |
v_usb1: regulator-v-usb1 { |
| 92 |
compatible = "regulator-fixed"; |
| 93 |
enable-active-high; |
| 94 |
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; |
| 95 |
pinctrl-names = "default"; |
| 96 |
pinctrl-0 = <&pinctrl_cubox_i_usbotg_vbus>; |
| 97 |
regulator-max-microvolt = <5000000>; |
| 98 |
regulator-min-microvolt = <5000000>; |
| 99 |
regulator-name = "v_usb1"; |
| 100 |
vin-supply = <&v_5v0>; |
| 101 |
}; |
| 102 |
|
| 103 |
spdif_out: spdif-out { |
| 104 |
compatible = "linux,spdif-dit"; |
| 105 |
#sound-dai-cells = <0>; |
| 106 |
}; |
| 107 |
|
| 108 |
sound-spdif { |
| 109 |
compatible = "fsl,imx-audio-spdif"; |
| 110 |
model = "Integrated SPDIF"; |
| 111 |
/* IMX6 doesn't implement this yet */ |
| 112 |
audio-cpu = <&spdif>; |
| 113 |
audio-codec = <&spdif_out>; |
| 114 |
}; |
| 115 |
|
| 116 |
gpio-keys { |
| 117 |
compatible = "gpio-keys"; |
| 118 |
pinctrl-0 = <&pinctrl_gpio_key>; |
| 119 |
pinctrl-names = "default"; |
| 120 |
|
| 121 |
button-0 { |
| 122 |
label = "Button 0"; |
| 123 |
gpios = <&gpio3 8 GPIO_ACTIVE_LOW>; |
| 124 |
linux,code = <BTN_0>; |
| 125 |
}; |
| 126 |
}; |
| 127 |
}; |
| 128 |
|
| 129 |
&hdmi { |
| 130 |
pinctrl-names = "default"; |
| 131 |
pinctrl-0 = <&pinctrl_cubox_i_hdmi>; |
| 132 |
ddc-i2c-bus = <&i2c2>; |
| 133 |
status = "okay"; |
| 134 |
}; |
| 135 |
|
| 136 |
&i2c2 { |
| 137 |
clock-frequency = <100000>; |
| 138 |
pinctrl-names = "default"; |
| 139 |
pinctrl-0 = <&pinctrl_cubox_i_i2c2>; |
| 140 |
status = "okay"; |
| 141 |
}; |
| 142 |
|
| 143 |
&i2c3 { |
| 144 |
pinctrl-names = "default"; |
| 145 |
pinctrl-0 = <&pinctrl_cubox_i_i2c3>; |
| 146 |
|
| 147 |
status = "okay"; |
| 148 |
|
| 149 |
rtc@68 { |
| 150 |
compatible = "nxp,pcf8523"; |
| 151 |
reg = <0x68>; |
| 152 |
}; |
| 153 |
}; |
| 154 |
|
| 155 |
&iomuxc { |
| 156 |
pinctrl_cubox_i_hdmi: cubox-i-hdmigrp { |
| 157 |
fsl,pins = < |
| 158 |
MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 |
| 159 |
>; |
| 160 |
}; |
| 161 |
|
| 162 |
pinctrl_cubox_i_i2c2: cubox-i-i2c2grp { |
| 163 |
fsl,pins = < |
| 164 |
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 |
| 165 |
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 |
| 166 |
>; |
| 167 |
}; |
| 168 |
|
| 169 |
pinctrl_cubox_i_i2c3: cubox-i-i2c3grp { |
| 170 |
fsl,pins = < |
| 171 |
MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 |
| 172 |
MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 |
| 173 |
>; |
| 174 |
}; |
| 175 |
|
| 176 |
pinctrl_cubox_i_ir: cubox-i-irgrp { |
| 177 |
fsl,pins = < |
| 178 |
MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 |
| 179 |
>; |
| 180 |
}; |
| 181 |
|
| 182 |
pinctrl_cubox_i_pwm1: cubox-i-pwm1-front-ledgrp { |
| 183 |
fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0>; |
| 184 |
}; |
| 185 |
|
| 186 |
pinctrl_cubox_i_spdif: cubox-i-spdifgrp { |
| 187 |
fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; |
| 188 |
}; |
| 189 |
|
| 190 |
pinctrl_cubox_i_usbh1: cubox-i-usbh1grp { |
| 191 |
fsl,pins = <MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0>; |
| 192 |
}; |
| 193 |
|
| 194 |
pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbusgrp { |
| 195 |
fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>; |
| 196 |
}; |
| 197 |
|
| 198 |
pinctrl_cubox_i_usbotg: cubox-i-usbotggrp { |
| 199 |
/* |
| 200 |
* The Cubox-i pulls ID low, but as it's pointless |
| 201 |
* leaving it as a pull-up, even if it is just 10uA. |
| 202 |
*/ |
| 203 |
fsl,pins = < |
| 204 |
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059 |
| 205 |
MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 |
| 206 |
>; |
| 207 |
}; |
| 208 |
|
| 209 |
pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbusgrp { |
| 210 |
fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x4001b0b0>; |
| 211 |
}; |
| 212 |
|
| 213 |
pinctrl_cubox_i_usdhc2_aux: cubox-i-usdhc2-auxgrp { |
| 214 |
fsl,pins = < |
| 215 |
MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 |
| 216 |
MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071 |
| 217 |
>; |
| 218 |
}; |
| 219 |
|
| 220 |
pinctrl_cubox_i_usdhc2: cubox-i-usdhc2grp { |
| 221 |
fsl,pins = < |
| 222 |
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 |
| 223 |
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 |
| 224 |
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 |
| 225 |
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 |
| 226 |
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 |
| 227 |
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 |
| 228 |
>; |
| 229 |
}; |
| 230 |
|
| 231 |
pinctrl_gpio_key: gpio-keygrp { |
| 232 |
fsl,pins = < |
| 233 |
MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x17059 |
| 234 |
>; |
| 235 |
}; |
| 236 |
}; |
| 237 |
|
| 238 |
&pwm1 { |
| 239 |
status = "okay"; |
| 240 |
}; |
| 241 |
|
| 242 |
&spdif { |
| 243 |
pinctrl-names = "default"; |
| 244 |
pinctrl-0 = <&pinctrl_cubox_i_spdif>; |
| 245 |
status = "okay"; |
| 246 |
}; |
| 247 |
|
| 248 |
&usbh1 { |
| 249 |
pinctrl-names = "default"; |
| 250 |
pinctrl-0 = <&pinctrl_cubox_i_usbh1>; |
| 251 |
vbus-supply = <&v_usb2>; |
| 252 |
status = "okay"; |
| 253 |
}; |
| 254 |
|
| 255 |
&usbotg { |
| 256 |
pinctrl-names = "default"; |
| 257 |
pinctrl-0 = <&pinctrl_cubox_i_usbotg>; |
| 258 |
vbus-supply = <&v_usb1>; |
| 259 |
status = "okay"; |
| 260 |
}; |
| 261 |
|
| 262 |
&usdhc2 { |
| 263 |
pinctrl-names = "default"; |
| 264 |
pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>; |
| 265 |
vmmc-supply = <&vcc_3v3>; |
| 266 |
cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; |
| 267 |
status = "okay"; |
| 268 |
}; |
| 269 |
|
| 270 |
&vcc_3v3 { |
| 271 |
vin-supply = <&v_5v0>; |
| 272 |
}; |