| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
// |
| 3 |
// Copyright 2014 Freescale Semiconductor, Inc. |
| 4 |
|
| 5 |
#include <dt-bindings/clock/imx6sx-clock.h> |
| 6 |
#include <dt-bindings/gpio/gpio.h> |
| 7 |
#include <dt-bindings/input/input.h> |
| 8 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 9 |
#include "imx6sx-pinfunc.h" |
| 10 |
|
| 11 |
/ { |
| 12 |
#address-cells = <1>; |
| 13 |
#size-cells = <1>; |
| 14 |
/* |
| 15 |
* The decompressor and also some bootloaders rely on a |
| 16 |
* pre-existing /chosen node to be available to insert the |
| 17 |
* command line and merge other ATAGS info. |
| 18 |
*/ |
| 19 |
chosen {}; |
| 20 |
|
| 21 |
aliases { |
| 22 |
can0 = &flexcan1; |
| 23 |
can1 = &flexcan2; |
| 24 |
ethernet0 = &fec1; |
| 25 |
ethernet1 = &fec2; |
| 26 |
gpio0 = &gpio1; |
| 27 |
gpio1 = &gpio2; |
| 28 |
gpio2 = &gpio3; |
| 29 |
gpio3 = &gpio4; |
| 30 |
gpio4 = &gpio5; |
| 31 |
gpio5 = &gpio6; |
| 32 |
gpio6 = &gpio7; |
| 33 |
i2c0 = &i2c1; |
| 34 |
i2c1 = &i2c2; |
| 35 |
i2c2 = &i2c3; |
| 36 |
i2c3 = &i2c4; |
| 37 |
mmc0 = &usdhc1; |
| 38 |
mmc1 = &usdhc2; |
| 39 |
mmc2 = &usdhc3; |
| 40 |
mmc3 = &usdhc4; |
| 41 |
serial0 = &uart1; |
| 42 |
serial1 = &uart2; |
| 43 |
serial2 = &uart3; |
| 44 |
serial3 = &uart4; |
| 45 |
serial4 = &uart5; |
| 46 |
serial5 = &uart6; |
| 47 |
spi0 = &ecspi1; |
| 48 |
spi1 = &ecspi2; |
| 49 |
spi2 = &ecspi3; |
| 50 |
spi3 = &ecspi4; |
| 51 |
spi4 = &ecspi5; |
| 52 |
usb0 = &usbotg1; |
| 53 |
usb1 = &usbotg2; |
| 54 |
usb2 = &usbh; |
| 55 |
usbphy0 = &usbphy1; |
| 56 |
usbphy1 = &usbphy2; |
| 57 |
}; |
| 58 |
|
| 59 |
cpus { |
| 60 |
#address-cells = <1>; |
| 61 |
#size-cells = <0>; |
| 62 |
|
| 63 |
cpu0: cpu@0 { |
| 64 |
compatible = "arm,cortex-a9"; |
| 65 |
device_type = "cpu"; |
| 66 |
reg = <0>; |
| 67 |
next-level-cache = <&L2>; |
| 68 |
operating-points = < |
| 69 |
/* kHz uV */ |
| 70 |
996000 1250000 |
| 71 |
792000 1175000 |
| 72 |
396000 1075000 |
| 73 |
198000 975000 |
| 74 |
>; |
| 75 |
fsl,soc-operating-points = < |
| 76 |
/* ARM kHz SOC uV */ |
| 77 |
996000 1175000 |
| 78 |
792000 1175000 |
| 79 |
396000 1175000 |
| 80 |
198000 1175000 |
| 81 |
>; |
| 82 |
clock-latency = <61036>; /* two CLK32 periods */ |
| 83 |
#cooling-cells = <2>; |
| 84 |
clocks = <&clks IMX6SX_CLK_ARM>, |
| 85 |
<&clks IMX6SX_CLK_PLL2_PFD2>, |
| 86 |
<&clks IMX6SX_CLK_STEP>, |
| 87 |
<&clks IMX6SX_CLK_PLL1_SW>, |
| 88 |
<&clks IMX6SX_CLK_PLL1_SYS>; |
| 89 |
clock-names = "arm", "pll2_pfd2_396m", "step", |
| 90 |
"pll1_sw", "pll1_sys"; |
| 91 |
arm-supply = <®_arm>; |
| 92 |
soc-supply = <®_soc>; |
| 93 |
nvmem-cells = <&cpu_speed_grade>; |
| 94 |
nvmem-cell-names = "speed_grade"; |
| 95 |
}; |
| 96 |
}; |
| 97 |
|
| 98 |
ckil: clock-ckil { |
| 99 |
compatible = "fixed-clock"; |
| 100 |
#clock-cells = <0>; |
| 101 |
clock-frequency = <32768>; |
| 102 |
clock-output-names = "ckil"; |
| 103 |
}; |
| 104 |
|
| 105 |
osc: clock-osc { |
| 106 |
compatible = "fixed-clock"; |
| 107 |
#clock-cells = <0>; |
| 108 |
clock-frequency = <24000000>; |
| 109 |
clock-output-names = "osc"; |
| 110 |
}; |
| 111 |
|
| 112 |
ipp_di0: clock-ipp-di0 { |
| 113 |
compatible = "fixed-clock"; |
| 114 |
#clock-cells = <0>; |
| 115 |
clock-frequency = <0>; |
| 116 |
clock-output-names = "ipp_di0"; |
| 117 |
}; |
| 118 |
|
| 119 |
ipp_di1: clock-ipp-di1 { |
| 120 |
compatible = "fixed-clock"; |
| 121 |
#clock-cells = <0>; |
| 122 |
clock-frequency = <0>; |
| 123 |
clock-output-names = "ipp_di1"; |
| 124 |
}; |
| 125 |
|
| 126 |
anaclk1: clock-anaclk1 { |
| 127 |
compatible = "fixed-clock"; |
| 128 |
#clock-cells = <0>; |
| 129 |
clock-frequency = <0>; |
| 130 |
clock-output-names = "anaclk1"; |
| 131 |
}; |
| 132 |
|
| 133 |
anaclk2: clock-anaclk2 { |
| 134 |
compatible = "fixed-clock"; |
| 135 |
#clock-cells = <0>; |
| 136 |
clock-frequency = <0>; |
| 137 |
clock-output-names = "anaclk2"; |
| 138 |
}; |
| 139 |
|
| 140 |
mqs: mqs { |
| 141 |
compatible = "fsl,imx6sx-mqs"; |
| 142 |
gpr = <&gpr>; |
| 143 |
status = "disabled"; |
| 144 |
}; |
| 145 |
|
| 146 |
pmu { |
| 147 |
compatible = "arm,cortex-a9-pmu"; |
| 148 |
interrupt-parent = <&gpc>; |
| 149 |
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; |
| 150 |
}; |
| 151 |
|
| 152 |
usbphynop1: usbphynop1 { |
| 153 |
compatible = "usb-nop-xceiv"; |
| 154 |
#phy-cells = <0>; |
| 155 |
}; |
| 156 |
|
| 157 |
soc: soc { |
| 158 |
#address-cells = <1>; |
| 159 |
#size-cells = <1>; |
| 160 |
compatible = "simple-bus"; |
| 161 |
interrupt-parent = <&gpc>; |
| 162 |
ranges; |
| 163 |
|
| 164 |
ocram_s: sram@8f8000 { |
| 165 |
compatible = "mmio-sram"; |
| 166 |
reg = <0x008f8000 0x4000>; |
| 167 |
ranges = <0 0x008f8000 0x4000>; |
| 168 |
#address-cells = <1>; |
| 169 |
#size-cells = <1>; |
| 170 |
clocks = <&clks IMX6SX_CLK_OCRAM_S>; |
| 171 |
}; |
| 172 |
|
| 173 |
ocram: sram@900000 { |
| 174 |
compatible = "mmio-sram"; |
| 175 |
reg = <0x00900000 0x20000>; |
| 176 |
ranges = <0 0x00900000 0x20000>; |
| 177 |
#address-cells = <1>; |
| 178 |
#size-cells = <1>; |
| 179 |
clocks = <&clks IMX6SX_CLK_OCRAM>; |
| 180 |
}; |
| 181 |
|
| 182 |
intc: interrupt-controller@a01000 { |
| 183 |
compatible = "arm,cortex-a9-gic"; |
| 184 |
#interrupt-cells = <3>; |
| 185 |
interrupt-controller; |
| 186 |
reg = <0x00a01000 0x1000>, |
| 187 |
<0x00a00100 0x100>; |
| 188 |
interrupt-parent = <&intc>; |
| 189 |
}; |
| 190 |
|
| 191 |
L2: cache-controller@a02000 { |
| 192 |
compatible = "arm,pl310-cache"; |
| 193 |
reg = <0x00a02000 0x1000>; |
| 194 |
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; |
| 195 |
cache-unified; |
| 196 |
cache-level = <2>; |
| 197 |
arm,tag-latency = <4 2 3>; |
| 198 |
arm,data-latency = <4 2 3>; |
| 199 |
}; |
| 200 |
|
| 201 |
gpu: gpu@1800000 { |
| 202 |
compatible = "vivante,gc"; |
| 203 |
reg = <0x01800000 0x4000>; |
| 204 |
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| 205 |
clocks = <&clks IMX6SX_CLK_GPU>, |
| 206 |
<&clks IMX6SX_CLK_GPU>, |
| 207 |
<&clks IMX6SX_CLK_GPU>; |
| 208 |
clock-names = "bus", "core", "shader"; |
| 209 |
power-domains = <&pd_pu>; |
| 210 |
}; |
| 211 |
|
| 212 |
dma_apbh: dma-controller@1804000 { |
| 213 |
compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh"; |
| 214 |
reg = <0x01804000 0x2000>; |
| 215 |
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, |
| 216 |
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, |
| 217 |
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, |
| 218 |
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| 219 |
#dma-cells = <1>; |
| 220 |
dma-channels = <4>; |
| 221 |
clocks = <&clks IMX6SX_CLK_APBH_DMA>; |
| 222 |
}; |
| 223 |
|
| 224 |
gpmi: nand-controller@1806000 { |
| 225 |
compatible = "fsl,imx6sx-gpmi-nand"; |
| 226 |
#address-cells = <1>; |
| 227 |
#size-cells = <0>; |
| 228 |
reg = <0x01806000 0x2000>, <0x01808000 0x4000>; |
| 229 |
reg-names = "gpmi-nand", "bch"; |
| 230 |
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; |
| 231 |
interrupt-names = "bch"; |
| 232 |
clocks = <&clks IMX6SX_CLK_GPMI_IO>, |
| 233 |
<&clks IMX6SX_CLK_GPMI_APB>, |
| 234 |
<&clks IMX6SX_CLK_GPMI_BCH>, |
| 235 |
<&clks IMX6SX_CLK_GPMI_BCH_APB>, |
| 236 |
<&clks IMX6SX_CLK_PER1_BCH>; |
| 237 |
clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch", |
| 238 |
"gpmi_bch_apb", "per1_bch"; |
| 239 |
dmas = <&dma_apbh 0>; |
| 240 |
dma-names = "rx-tx"; |
| 241 |
status = "disabled"; |
| 242 |
}; |
| 243 |
|
| 244 |
aips1: bus@2000000 { |
| 245 |
compatible = "fsl,aips-bus", "simple-bus"; |
| 246 |
#address-cells = <1>; |
| 247 |
#size-cells = <1>; |
| 248 |
reg = <0x02000000 0x100000>; |
| 249 |
ranges; |
| 250 |
|
| 251 |
spba-bus@2000000 { |
| 252 |
compatible = "fsl,spba-bus", "simple-bus"; |
| 253 |
#address-cells = <1>; |
| 254 |
#size-cells = <1>; |
| 255 |
reg = <0x02000000 0x40000>; |
| 256 |
ranges; |
| 257 |
|
| 258 |
spdif: spdif@2004000 { |
| 259 |
compatible = "fsl,imx6sx-spdif", "fsl,imx35-spdif"; |
| 260 |
reg = <0x02004000 0x4000>; |
| 261 |
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; |
| 262 |
dmas = <&sdma 14 18 0>, |
| 263 |
<&sdma 15 18 0>; |
| 264 |
dma-names = "rx", "tx"; |
| 265 |
clocks = <&clks IMX6SX_CLK_SPDIF_GCLK>, |
| 266 |
<&clks IMX6SX_CLK_OSC>, |
| 267 |
<&clks IMX6SX_CLK_SPDIF>, |
| 268 |
<&clks 0>, <&clks 0>, <&clks 0>, |
| 269 |
<&clks IMX6SX_CLK_IPG>, |
| 270 |
<&clks 0>, <&clks 0>, |
| 271 |
<&clks IMX6SX_CLK_SPBA>; |
| 272 |
clock-names = "core", "rxtx0", |
| 273 |
"rxtx1", "rxtx2", |
| 274 |
"rxtx3", "rxtx4", |
| 275 |
"rxtx5", "rxtx6", |
| 276 |
"rxtx7", "spba"; |
| 277 |
status = "disabled"; |
| 278 |
}; |
| 279 |
|
| 280 |
ecspi1: spi@2008000 { |
| 281 |
#address-cells = <1>; |
| 282 |
#size-cells = <0>; |
| 283 |
compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; |
| 284 |
reg = <0x02008000 0x4000>; |
| 285 |
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; |
| 286 |
clocks = <&clks IMX6SX_CLK_ECSPI1>, |
| 287 |
<&clks IMX6SX_CLK_ECSPI1>; |
| 288 |
clock-names = "ipg", "per"; |
| 289 |
status = "disabled"; |
| 290 |
}; |
| 291 |
|
| 292 |
ecspi2: spi@200c000 { |
| 293 |
#address-cells = <1>; |
| 294 |
#size-cells = <0>; |
| 295 |
compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; |
| 296 |
reg = <0x0200c000 0x4000>; |
| 297 |
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| 298 |
clocks = <&clks IMX6SX_CLK_ECSPI2>, |
| 299 |
<&clks IMX6SX_CLK_ECSPI2>; |
| 300 |
clock-names = "ipg", "per"; |
| 301 |
status = "disabled"; |
| 302 |
}; |
| 303 |
|
| 304 |
ecspi3: spi@2010000 { |
| 305 |
#address-cells = <1>; |
| 306 |
#size-cells = <0>; |
| 307 |
compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; |
| 308 |
reg = <0x02010000 0x4000>; |
| 309 |
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| 310 |
clocks = <&clks IMX6SX_CLK_ECSPI3>, |
| 311 |
<&clks IMX6SX_CLK_ECSPI3>; |
| 312 |
clock-names = "ipg", "per"; |
| 313 |
status = "disabled"; |
| 314 |
}; |
| 315 |
|
| 316 |
ecspi4: spi@2014000 { |
| 317 |
#address-cells = <1>; |
| 318 |
#size-cells = <0>; |
| 319 |
compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; |
| 320 |
reg = <0x02014000 0x4000>; |
| 321 |
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| 322 |
clocks = <&clks IMX6SX_CLK_ECSPI4>, |
| 323 |
<&clks IMX6SX_CLK_ECSPI4>; |
| 324 |
clock-names = "ipg", "per"; |
| 325 |
status = "disabled"; |
| 326 |
}; |
| 327 |
|
| 328 |
uart1: serial@2020000 { |
| 329 |
compatible = "fsl,imx6sx-uart", |
| 330 |
"fsl,imx6q-uart", "fsl,imx21-uart"; |
| 331 |
reg = <0x02020000 0x4000>; |
| 332 |
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| 333 |
clocks = <&clks IMX6SX_CLK_UART_IPG>, |
| 334 |
<&clks IMX6SX_CLK_UART_SERIAL>; |
| 335 |
clock-names = "ipg", "per"; |
| 336 |
dmas = <&sdma 25 4 0>, <&sdma 26 4 0>; |
| 337 |
dma-names = "rx", "tx"; |
| 338 |
status = "disabled"; |
| 339 |
}; |
| 340 |
|
| 341 |
esai: esai@2024000 { |
| 342 |
compatible = "fsl,imx35-esai"; |
| 343 |
reg = <0x02024000 0x4000>; |
| 344 |
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; |
| 345 |
clocks = <&clks IMX6SX_CLK_ESAI_IPG>, |
| 346 |
<&clks IMX6SX_CLK_ESAI_EXTAL>, |
| 347 |
<&clks IMX6SX_CLK_ESAI_IPG>, |
| 348 |
<&clks IMX6SX_CLK_SPBA>; |
| 349 |
clock-names = "core", "extal", |
| 350 |
"fsys", "spba"; |
| 351 |
dmas = <&sdma 23 21 0>, |
| 352 |
<&sdma 24 21 0>; |
| 353 |
dma-names = "rx", "tx"; |
| 354 |
status = "disabled"; |
| 355 |
}; |
| 356 |
|
| 357 |
ssi1: ssi@2028000 { |
| 358 |
#sound-dai-cells = <0>; |
| 359 |
compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; |
| 360 |
reg = <0x02028000 0x4000>; |
| 361 |
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; |
| 362 |
clocks = <&clks IMX6SX_CLK_SSI1_IPG>, |
| 363 |
<&clks IMX6SX_CLK_SSI1>; |
| 364 |
clock-names = "ipg", "baud"; |
| 365 |
dmas = <&sdma 37 1 0>, <&sdma 38 1 0>; |
| 366 |
dma-names = "rx", "tx"; |
| 367 |
fsl,fifo-depth = <15>; |
| 368 |
status = "disabled"; |
| 369 |
}; |
| 370 |
|
| 371 |
ssi2: ssi@202c000 { |
| 372 |
#sound-dai-cells = <0>; |
| 373 |
compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; |
| 374 |
reg = <0x0202c000 0x4000>; |
| 375 |
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; |
| 376 |
clocks = <&clks IMX6SX_CLK_SSI2_IPG>, |
| 377 |
<&clks IMX6SX_CLK_SSI2>; |
| 378 |
clock-names = "ipg", "baud"; |
| 379 |
dmas = <&sdma 41 1 0>, <&sdma 42 1 0>; |
| 380 |
dma-names = "rx", "tx"; |
| 381 |
fsl,fifo-depth = <15>; |
| 382 |
status = "disabled"; |
| 383 |
}; |
| 384 |
|
| 385 |
ssi3: ssi@2030000 { |
| 386 |
#sound-dai-cells = <0>; |
| 387 |
compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; |
| 388 |
reg = <0x02030000 0x4000>; |
| 389 |
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; |
| 390 |
clocks = <&clks IMX6SX_CLK_SSI3_IPG>, |
| 391 |
<&clks IMX6SX_CLK_SSI3>; |
| 392 |
clock-names = "ipg", "baud"; |
| 393 |
dmas = <&sdma 45 1 0>, <&sdma 46 1 0>; |
| 394 |
dma-names = "rx", "tx"; |
| 395 |
fsl,fifo-depth = <15>; |
| 396 |
status = "disabled"; |
| 397 |
}; |
| 398 |
|
| 399 |
asrc: asrc@2034000 { |
| 400 |
compatible = "fsl,imx6sx-asrc", "fsl,imx53-asrc"; |
| 401 |
reg = <0x02034000 0x4000>; |
| 402 |
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; |
| 403 |
clocks = <&clks IMX6SX_CLK_ASRC_IPG>, |
| 404 |
<&clks IMX6SX_CLK_ASRC_MEM>, <&clks 0>, |
| 405 |
<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, |
| 406 |
<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, |
| 407 |
<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, |
| 408 |
<&clks IMX6SX_CLK_SPDIF>, <&clks 0>, <&clks 0>, |
| 409 |
<&clks IMX6SX_CLK_SPBA>; |
| 410 |
clock-names = "mem", "ipg", "asrck_0", |
| 411 |
"asrck_1", "asrck_2", "asrck_3", "asrck_4", |
| 412 |
"asrck_5", "asrck_6", "asrck_7", "asrck_8", |
| 413 |
"asrck_9", "asrck_a", "asrck_b", "asrck_c", |
| 414 |
"asrck_d", "asrck_e", "asrck_f", "spba"; |
| 415 |
dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, |
| 416 |
<&sdma 19 23 1>, <&sdma 20 23 1>, |
| 417 |
<&sdma 21 23 1>, <&sdma 22 23 1>; |
| 418 |
dma-names = "rxa", "rxb", "rxc", |
| 419 |
"txa", "txb", "txc"; |
| 420 |
fsl,asrc-rate = <48000>; |
| 421 |
fsl,asrc-width = <16>; |
| 422 |
status = "okay"; |
| 423 |
}; |
| 424 |
}; |
| 425 |
|
| 426 |
pwm1: pwm@2080000 { |
| 427 |
compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; |
| 428 |
reg = <0x02080000 0x4000>; |
| 429 |
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; |
| 430 |
clocks = <&clks IMX6SX_CLK_PWM1>, |
| 431 |
<&clks IMX6SX_CLK_PWM1>; |
| 432 |
clock-names = "ipg", "per"; |
| 433 |
#pwm-cells = <3>; |
| 434 |
}; |
| 435 |
|
| 436 |
pwm2: pwm@2084000 { |
| 437 |
compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; |
| 438 |
reg = <0x02084000 0x4000>; |
| 439 |
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| 440 |
clocks = <&clks IMX6SX_CLK_PWM2>, |
| 441 |
<&clks IMX6SX_CLK_PWM2>; |
| 442 |
clock-names = "ipg", "per"; |
| 443 |
#pwm-cells = <3>; |
| 444 |
}; |
| 445 |
|
| 446 |
pwm3: pwm@2088000 { |
| 447 |
compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; |
| 448 |
reg = <0x02088000 0x4000>; |
| 449 |
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; |
| 450 |
clocks = <&clks IMX6SX_CLK_PWM3>, |
| 451 |
<&clks IMX6SX_CLK_PWM3>; |
| 452 |
clock-names = "ipg", "per"; |
| 453 |
#pwm-cells = <3>; |
| 454 |
}; |
| 455 |
|
| 456 |
pwm4: pwm@208c000 { |
| 457 |
compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; |
| 458 |
reg = <0x0208c000 0x4000>; |
| 459 |
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| 460 |
clocks = <&clks IMX6SX_CLK_PWM4>, |
| 461 |
<&clks IMX6SX_CLK_PWM4>; |
| 462 |
clock-names = "ipg", "per"; |
| 463 |
#pwm-cells = <3>; |
| 464 |
}; |
| 465 |
|
| 466 |
flexcan1: can@2090000 { |
| 467 |
compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan"; |
| 468 |
reg = <0x02090000 0x4000>; |
| 469 |
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; |
| 470 |
clocks = <&clks IMX6SX_CLK_CAN1_IPG>, |
| 471 |
<&clks IMX6SX_CLK_CAN1_SERIAL>; |
| 472 |
clock-names = "ipg", "per"; |
| 473 |
fsl,stop-mode = <&gpr 0x10 1>; |
| 474 |
status = "disabled"; |
| 475 |
}; |
| 476 |
|
| 477 |
flexcan2: can@2094000 { |
| 478 |
compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan"; |
| 479 |
reg = <0x02094000 0x4000>; |
| 480 |
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; |
| 481 |
clocks = <&clks IMX6SX_CLK_CAN2_IPG>, |
| 482 |
<&clks IMX6SX_CLK_CAN2_SERIAL>; |
| 483 |
clock-names = "ipg", "per"; |
| 484 |
fsl,stop-mode = <&gpr 0x10 2>; |
| 485 |
status = "disabled"; |
| 486 |
}; |
| 487 |
|
| 488 |
gpt: timer@2098000 { |
| 489 |
compatible = "fsl,imx6sx-gpt", "fsl,imx6dl-gpt"; |
| 490 |
reg = <0x02098000 0x4000>; |
| 491 |
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; |
| 492 |
clocks = <&clks IMX6SX_CLK_GPT_BUS>, |
| 493 |
<&clks IMX6SX_CLK_GPT_3M>; |
| 494 |
clock-names = "ipg", "per"; |
| 495 |
}; |
| 496 |
|
| 497 |
gpio1: gpio@209c000 { |
| 498 |
compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; |
| 499 |
reg = <0x0209c000 0x4000>; |
| 500 |
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, |
| 501 |
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; |
| 502 |
gpio-controller; |
| 503 |
#gpio-cells = <2>; |
| 504 |
interrupt-controller; |
| 505 |
#interrupt-cells = <2>; |
| 506 |
gpio-ranges = <&iomuxc 0 5 26>; |
| 507 |
}; |
| 508 |
|
| 509 |
gpio2: gpio@20a0000 { |
| 510 |
compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; |
| 511 |
reg = <0x020a0000 0x4000>; |
| 512 |
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, |
| 513 |
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; |
| 514 |
gpio-controller; |
| 515 |
#gpio-cells = <2>; |
| 516 |
interrupt-controller; |
| 517 |
#interrupt-cells = <2>; |
| 518 |
gpio-ranges = <&iomuxc 0 31 20>; |
| 519 |
}; |
| 520 |
|
| 521 |
gpio3: gpio@20a4000 { |
| 522 |
compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; |
| 523 |
reg = <0x020a4000 0x4000>; |
| 524 |
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, |
| 525 |
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; |
| 526 |
gpio-controller; |
| 527 |
#gpio-cells = <2>; |
| 528 |
interrupt-controller; |
| 529 |
#interrupt-cells = <2>; |
| 530 |
gpio-ranges = <&iomuxc 0 51 29>; |
| 531 |
}; |
| 532 |
|
| 533 |
gpio4: gpio@20a8000 { |
| 534 |
compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; |
| 535 |
reg = <0x020a8000 0x4000>; |
| 536 |
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, |
| 537 |
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; |
| 538 |
gpio-controller; |
| 539 |
#gpio-cells = <2>; |
| 540 |
interrupt-controller; |
| 541 |
#interrupt-cells = <2>; |
| 542 |
gpio-ranges = <&iomuxc 0 80 32>; |
| 543 |
}; |
| 544 |
|
| 545 |
gpio5: gpio@20ac000 { |
| 546 |
compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; |
| 547 |
reg = <0x020ac000 0x4000>; |
| 548 |
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, |
| 549 |
<GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; |
| 550 |
gpio-controller; |
| 551 |
#gpio-cells = <2>; |
| 552 |
interrupt-controller; |
| 553 |
#interrupt-cells = <2>; |
| 554 |
gpio-ranges = <&iomuxc 0 112 24>; |
| 555 |
}; |
| 556 |
|
| 557 |
gpio6: gpio@20b0000 { |
| 558 |
compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; |
| 559 |
reg = <0x020b0000 0x4000>; |
| 560 |
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, |
| 561 |
<GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; |
| 562 |
gpio-controller; |
| 563 |
#gpio-cells = <2>; |
| 564 |
interrupt-controller; |
| 565 |
#interrupt-cells = <2>; |
| 566 |
gpio-ranges = <&iomuxc 0 136 12>, <&iomuxc 12 158 11>; |
| 567 |
}; |
| 568 |
|
| 569 |
gpio7: gpio@20b4000 { |
| 570 |
compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; |
| 571 |
reg = <0x020b4000 0x4000>; |
| 572 |
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, |
| 573 |
<GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; |
| 574 |
gpio-controller; |
| 575 |
#gpio-cells = <2>; |
| 576 |
interrupt-controller; |
| 577 |
#interrupt-cells = <2>; |
| 578 |
gpio-ranges = <&iomuxc 0 148 10>, <&iomuxc 10 169 2>; |
| 579 |
}; |
| 580 |
|
| 581 |
kpp: keypad@20b8000 { |
| 582 |
compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp"; |
| 583 |
reg = <0x020b8000 0x4000>; |
| 584 |
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; |
| 585 |
clocks = <&clks IMX6SX_CLK_IPG>; |
| 586 |
status = "disabled"; |
| 587 |
}; |
| 588 |
|
| 589 |
wdog1: watchdog@20bc000 { |
| 590 |
compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; |
| 591 |
reg = <0x020bc000 0x4000>; |
| 592 |
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; |
| 593 |
clocks = <&clks IMX6SX_CLK_IPG>; |
| 594 |
}; |
| 595 |
|
| 596 |
wdog2: watchdog@20c0000 { |
| 597 |
compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; |
| 598 |
reg = <0x020c0000 0x4000>; |
| 599 |
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; |
| 600 |
clocks = <&clks IMX6SX_CLK_IPG>; |
| 601 |
status = "disabled"; |
| 602 |
}; |
| 603 |
|
| 604 |
clks: clock-controller@20c4000 { |
| 605 |
compatible = "fsl,imx6sx-ccm"; |
| 606 |
reg = <0x020c4000 0x4000>; |
| 607 |
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, |
| 608 |
<GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; |
| 609 |
#clock-cells = <1>; |
| 610 |
clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>, <&anaclk1>, <&anaclk2>; |
| 611 |
clock-names = "ckil", "osc", "ipp_di0", "ipp_di1", "anaclk1", "anaclk2"; |
| 612 |
}; |
| 613 |
|
| 614 |
anatop: anatop@20c8000 { |
| 615 |
compatible = "fsl,imx6sx-anatop", "fsl,imx6q-anatop", |
| 616 |
"syscon", "simple-mfd"; |
| 617 |
reg = <0x020c8000 0x1000>; |
| 618 |
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, |
| 619 |
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, |
| 620 |
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; |
| 621 |
|
| 622 |
reg_vdd1p1: regulator-1p1 { |
| 623 |
compatible = "fsl,anatop-regulator"; |
| 624 |
regulator-name = "vdd1p1"; |
| 625 |
regulator-min-microvolt = <1000000>; |
| 626 |
regulator-max-microvolt = <1200000>; |
| 627 |
regulator-always-on; |
| 628 |
anatop-reg-offset = <0x110>; |
| 629 |
anatop-vol-bit-shift = <8>; |
| 630 |
anatop-vol-bit-width = <5>; |
| 631 |
anatop-min-bit-val = <4>; |
| 632 |
anatop-min-voltage = <800000>; |
| 633 |
anatop-max-voltage = <1375000>; |
| 634 |
anatop-enable-bit = <0>; |
| 635 |
}; |
| 636 |
|
| 637 |
reg_vdd3p0: regulator-3p0 { |
| 638 |
compatible = "fsl,anatop-regulator"; |
| 639 |
regulator-name = "vdd3p0"; |
| 640 |
regulator-min-microvolt = <2625000>; |
| 641 |
regulator-max-microvolt = <3400000>; |
| 642 |
regulator-always-on; |
| 643 |
anatop-reg-offset = <0x120>; |
| 644 |
anatop-vol-bit-shift = <8>; |
| 645 |
anatop-vol-bit-width = <5>; |
| 646 |
anatop-min-bit-val = <0>; |
| 647 |
anatop-min-voltage = <2625000>; |
| 648 |
anatop-max-voltage = <3400000>; |
| 649 |
anatop-enable-bit = <0>; |
| 650 |
}; |
| 651 |
|
| 652 |
reg_vdd2p5: regulator-2p5 { |
| 653 |
compatible = "fsl,anatop-regulator"; |
| 654 |
regulator-name = "vdd2p5"; |
| 655 |
regulator-min-microvolt = <2250000>; |
| 656 |
regulator-max-microvolt = <2750000>; |
| 657 |
regulator-always-on; |
| 658 |
anatop-reg-offset = <0x130>; |
| 659 |
anatop-vol-bit-shift = <8>; |
| 660 |
anatop-vol-bit-width = <5>; |
| 661 |
anatop-min-bit-val = <0>; |
| 662 |
anatop-min-voltage = <2100000>; |
| 663 |
anatop-max-voltage = <2875000>; |
| 664 |
anatop-enable-bit = <0>; |
| 665 |
}; |
| 666 |
|
| 667 |
reg_arm: regulator-vddcore { |
| 668 |
compatible = "fsl,anatop-regulator"; |
| 669 |
regulator-name = "vddarm"; |
| 670 |
regulator-min-microvolt = <725000>; |
| 671 |
regulator-max-microvolt = <1450000>; |
| 672 |
regulator-always-on; |
| 673 |
anatop-reg-offset = <0x140>; |
| 674 |
anatop-vol-bit-shift = <0>; |
| 675 |
anatop-vol-bit-width = <5>; |
| 676 |
anatop-delay-reg-offset = <0x170>; |
| 677 |
anatop-delay-bit-shift = <24>; |
| 678 |
anatop-delay-bit-width = <2>; |
| 679 |
anatop-min-bit-val = <1>; |
| 680 |
anatop-min-voltage = <725000>; |
| 681 |
anatop-max-voltage = <1450000>; |
| 682 |
}; |
| 683 |
|
| 684 |
reg_pcie: regulator-vddpcie { |
| 685 |
compatible = "fsl,anatop-regulator"; |
| 686 |
regulator-name = "vddpcie"; |
| 687 |
regulator-min-microvolt = <725000>; |
| 688 |
regulator-max-microvolt = <1450000>; |
| 689 |
anatop-reg-offset = <0x140>; |
| 690 |
anatop-vol-bit-shift = <9>; |
| 691 |
anatop-vol-bit-width = <5>; |
| 692 |
anatop-delay-reg-offset = <0x170>; |
| 693 |
anatop-delay-bit-shift = <26>; |
| 694 |
anatop-delay-bit-width = <2>; |
| 695 |
anatop-min-bit-val = <1>; |
| 696 |
anatop-min-voltage = <725000>; |
| 697 |
anatop-max-voltage = <1450000>; |
| 698 |
}; |
| 699 |
|
| 700 |
reg_soc: regulator-vddsoc { |
| 701 |
compatible = "fsl,anatop-regulator"; |
| 702 |
regulator-name = "vddsoc"; |
| 703 |
regulator-min-microvolt = <725000>; |
| 704 |
regulator-max-microvolt = <1450000>; |
| 705 |
regulator-always-on; |
| 706 |
anatop-reg-offset = <0x140>; |
| 707 |
anatop-vol-bit-shift = <18>; |
| 708 |
anatop-vol-bit-width = <5>; |
| 709 |
anatop-delay-reg-offset = <0x170>; |
| 710 |
anatop-delay-bit-shift = <28>; |
| 711 |
anatop-delay-bit-width = <2>; |
| 712 |
anatop-min-bit-val = <1>; |
| 713 |
anatop-min-voltage = <725000>; |
| 714 |
anatop-max-voltage = <1450000>; |
| 715 |
}; |
| 716 |
|
| 717 |
tempmon: tempmon { |
| 718 |
compatible = "fsl,imx6sx-tempmon"; |
| 719 |
interrupt-parent = <&gpc>; |
| 720 |
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; |
| 721 |
fsl,tempmon = <&anatop>; |
| 722 |
nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; |
| 723 |
nvmem-cell-names = "calib", "temp_grade"; |
| 724 |
clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>; |
| 725 |
#thermal-sensor-cells = <0>; |
| 726 |
}; |
| 727 |
}; |
| 728 |
|
| 729 |
usbphy1: usbphy@20c9000 { |
| 730 |
compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy"; |
| 731 |
reg = <0x020c9000 0x1000>; |
| 732 |
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; |
| 733 |
clocks = <&clks IMX6SX_CLK_USBPHY1>; |
| 734 |
phy-3p0-supply = <®_vdd3p0>; |
| 735 |
fsl,anatop = <&anatop>; |
| 736 |
}; |
| 737 |
|
| 738 |
usbphy2: usbphy@20ca000 { |
| 739 |
compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy"; |
| 740 |
reg = <0x020ca000 0x1000>; |
| 741 |
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; |
| 742 |
clocks = <&clks IMX6SX_CLK_USBPHY2>; |
| 743 |
phy-3p0-supply = <®_vdd3p0>; |
| 744 |
fsl,anatop = <&anatop>; |
| 745 |
}; |
| 746 |
|
| 747 |
snvs: snvs@20cc000 { |
| 748 |
compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; |
| 749 |
reg = <0x020cc000 0x4000>; |
| 750 |
|
| 751 |
snvs_rtc: snvs-rtc-lp { |
| 752 |
compatible = "fsl,sec-v4.0-mon-rtc-lp"; |
| 753 |
regmap = <&snvs>; |
| 754 |
offset = <0x34>; |
| 755 |
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; |
| 756 |
}; |
| 757 |
|
| 758 |
snvs_poweroff: snvs-poweroff { |
| 759 |
compatible = "syscon-poweroff"; |
| 760 |
regmap = <&snvs>; |
| 761 |
offset = <0x38>; |
| 762 |
value = <0x60>; |
| 763 |
mask = <0x60>; |
| 764 |
status = "disabled"; |
| 765 |
}; |
| 766 |
|
| 767 |
snvs_pwrkey: snvs-powerkey { |
| 768 |
compatible = "fsl,sec-v4.0-pwrkey"; |
| 769 |
regmap = <&snvs>; |
| 770 |
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; |
| 771 |
linux,keycode = <KEY_POWER>; |
| 772 |
wakeup-source; |
| 773 |
status = "disabled"; |
| 774 |
}; |
| 775 |
}; |
| 776 |
|
| 777 |
epit1: epit@20d0000 { |
| 778 |
reg = <0x020d0000 0x4000>; |
| 779 |
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; |
| 780 |
}; |
| 781 |
|
| 782 |
epit2: epit@20d4000 { |
| 783 |
reg = <0x020d4000 0x4000>; |
| 784 |
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; |
| 785 |
}; |
| 786 |
|
| 787 |
src: reset-controller@20d8000 { |
| 788 |
compatible = "fsl,imx6sx-src", "fsl,imx51-src"; |
| 789 |
reg = <0x020d8000 0x4000>; |
| 790 |
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, |
| 791 |
<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| 792 |
#reset-cells = <1>; |
| 793 |
}; |
| 794 |
|
| 795 |
gpc: gpc@20dc000 { |
| 796 |
compatible = "fsl,imx6sx-gpc", "fsl,imx6q-gpc"; |
| 797 |
reg = <0x020dc000 0x4000>; |
| 798 |
interrupt-controller; |
| 799 |
#interrupt-cells = <3>; |
| 800 |
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; |
| 801 |
interrupt-parent = <&intc>; |
| 802 |
clocks = <&clks IMX6SX_CLK_IPG>; |
| 803 |
clock-names = "ipg"; |
| 804 |
|
| 805 |
pgc { |
| 806 |
#address-cells = <1>; |
| 807 |
#size-cells = <0>; |
| 808 |
|
| 809 |
power-domain@0 { |
| 810 |
reg = <0>; |
| 811 |
#power-domain-cells = <0>; |
| 812 |
}; |
| 813 |
|
| 814 |
pd_pu: power-domain@1 { |
| 815 |
reg = <1>; |
| 816 |
#power-domain-cells = <0>; |
| 817 |
power-supply = <®_soc>; |
| 818 |
clocks = <&clks IMX6SX_CLK_GPU>; |
| 819 |
}; |
| 820 |
|
| 821 |
pd_disp: power-domain@2 { |
| 822 |
reg = <2>; |
| 823 |
#power-domain-cells = <0>; |
| 824 |
clocks = <&clks IMX6SX_CLK_PXP_AXI>, |
| 825 |
<&clks IMX6SX_CLK_DISPLAY_AXI>, |
| 826 |
<&clks IMX6SX_CLK_LCDIF1_PIX>, |
| 827 |
<&clks IMX6SX_CLK_LCDIF_APB>, |
| 828 |
<&clks IMX6SX_CLK_LCDIF2_PIX>, |
| 829 |
<&clks IMX6SX_CLK_CSI>, |
| 830 |
<&clks IMX6SX_CLK_VADC>; |
| 831 |
}; |
| 832 |
|
| 833 |
pd_pci: power-domain@3 { |
| 834 |
reg = <3>; |
| 835 |
#power-domain-cells = <0>; |
| 836 |
power-supply = <®_pcie>; |
| 837 |
}; |
| 838 |
}; |
| 839 |
}; |
| 840 |
|
| 841 |
iomuxc: pinctrl@20e0000 { |
| 842 |
compatible = "fsl,imx6sx-iomuxc"; |
| 843 |
reg = <0x020e0000 0x4000>; |
| 844 |
}; |
| 845 |
|
| 846 |
gpr: syscon@20e4000 { |
| 847 |
compatible = "fsl,imx6sx-iomuxc-gpr", |
| 848 |
"fsl,imx6q-iomuxc-gpr", "syscon", "simple-mfd"; |
| 849 |
#address-cells = <1>; |
| 850 |
#size-cells = <1>; |
| 851 |
reg = <0x020e4000 0x4000>; |
| 852 |
|
| 853 |
lvds_bridge: bridge@18 { |
| 854 |
compatible = "fsl,imx6sx-ldb"; |
| 855 |
reg = <0x18 0x4>; |
| 856 |
clocks = <&clks IMX6SX_CLK_LDB_DI0>; |
| 857 |
clock-names = "ldb"; |
| 858 |
status = "disabled"; |
| 859 |
|
| 860 |
ports { |
| 861 |
#address-cells = <1>; |
| 862 |
#size-cells = <0>; |
| 863 |
|
| 864 |
port@0 { |
| 865 |
reg = <0>; |
| 866 |
|
| 867 |
ldb_from_lcdif1: endpoint { |
| 868 |
}; |
| 869 |
}; |
| 870 |
|
| 871 |
port@1 { |
| 872 |
reg = <1>; |
| 873 |
|
| 874 |
ldb_lvds_ch0: endpoint { |
| 875 |
}; |
| 876 |
}; |
| 877 |
}; |
| 878 |
}; |
| 879 |
}; |
| 880 |
|
| 881 |
sdma: dma-controller@20ec000 { |
| 882 |
compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma"; |
| 883 |
reg = <0x020ec000 0x4000>; |
| 884 |
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| 885 |
clocks = <&clks IMX6SX_CLK_IPG>, |
| 886 |
<&clks IMX6SX_CLK_SDMA>; |
| 887 |
clock-names = "ipg", "ahb"; |
| 888 |
#dma-cells = <3>; |
| 889 |
/* imx6sx reuses imx6q sdma firmware */ |
| 890 |
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; |
| 891 |
}; |
| 892 |
}; |
| 893 |
|
| 894 |
aips2: bus@2100000 { |
| 895 |
compatible = "fsl,aips-bus", "simple-bus"; |
| 896 |
#address-cells = <1>; |
| 897 |
#size-cells = <1>; |
| 898 |
reg = <0x02100000 0x100000>; |
| 899 |
ranges; |
| 900 |
|
| 901 |
crypto: crypto@2100000 { |
| 902 |
compatible = "fsl,sec-v4.0"; |
| 903 |
#address-cells = <1>; |
| 904 |
#size-cells = <1>; |
| 905 |
reg = <0x2100000 0x10000>; |
| 906 |
ranges = <0 0x2100000 0x10000>; |
| 907 |
interrupt-parent = <&intc>; |
| 908 |
clocks = <&clks IMX6SX_CLK_CAAM_MEM>, |
| 909 |
<&clks IMX6SX_CLK_CAAM_ACLK>, |
| 910 |
<&clks IMX6SX_CLK_CAAM_IPG>, |
| 911 |
<&clks IMX6SX_CLK_EIM_SLOW>; |
| 912 |
clock-names = "mem", "aclk", "ipg", "emi_slow"; |
| 913 |
|
| 914 |
sec_jr0: jr@1000 { |
| 915 |
compatible = "fsl,sec-v4.0-job-ring"; |
| 916 |
reg = <0x1000 0x1000>; |
| 917 |
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; |
| 918 |
}; |
| 919 |
|
| 920 |
sec_jr1: jr@2000 { |
| 921 |
compatible = "fsl,sec-v4.0-job-ring"; |
| 922 |
reg = <0x2000 0x1000>; |
| 923 |
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; |
| 924 |
}; |
| 925 |
}; |
| 926 |
|
| 927 |
usbotg1: usb@2184000 { |
| 928 |
compatible = "fsl,imx6sx-usb", "fsl,imx27-usb"; |
| 929 |
reg = <0x02184000 0x200>; |
| 930 |
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; |
| 931 |
clocks = <&clks IMX6SX_CLK_USBOH3>; |
| 932 |
fsl,usbphy = <&usbphy1>; |
| 933 |
fsl,usbmisc = <&usbmisc 0>; |
| 934 |
ahb-burst-config = <0x0>; |
| 935 |
tx-burst-size-dword = <0x10>; |
| 936 |
rx-burst-size-dword = <0x10>; |
| 937 |
status = "disabled"; |
| 938 |
}; |
| 939 |
|
| 940 |
usbotg2: usb@2184200 { |
| 941 |
compatible = "fsl,imx6sx-usb", "fsl,imx27-usb"; |
| 942 |
reg = <0x02184200 0x200>; |
| 943 |
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| 944 |
clocks = <&clks IMX6SX_CLK_USBOH3>; |
| 945 |
fsl,usbphy = <&usbphy2>; |
| 946 |
fsl,usbmisc = <&usbmisc 1>; |
| 947 |
ahb-burst-config = <0x0>; |
| 948 |
tx-burst-size-dword = <0x10>; |
| 949 |
rx-burst-size-dword = <0x10>; |
| 950 |
status = "disabled"; |
| 951 |
}; |
| 952 |
|
| 953 |
usbh: usb@2184400 { |
| 954 |
compatible = "fsl,imx6sx-usb", "fsl,imx27-usb"; |
| 955 |
reg = <0x02184400 0x200>; |
| 956 |
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; |
| 957 |
clocks = <&clks IMX6SX_CLK_USBOH3>; |
| 958 |
fsl,usbphy = <&usbphynop1>; |
| 959 |
fsl,usbmisc = <&usbmisc 2>; |
| 960 |
phy_type = "hsic"; |
| 961 |
dr_mode = "host"; |
| 962 |
ahb-burst-config = <0x0>; |
| 963 |
tx-burst-size-dword = <0x10>; |
| 964 |
rx-burst-size-dword = <0x10>; |
| 965 |
status = "disabled"; |
| 966 |
}; |
| 967 |
|
| 968 |
usbmisc: usbmisc@2184800 { |
| 969 |
#index-cells = <1>; |
| 970 |
compatible = "fsl,imx6sx-usbmisc", "fsl,imx6q-usbmisc"; |
| 971 |
reg = <0x02184800 0x200>; |
| 972 |
clocks = <&clks IMX6SX_CLK_USBOH3>; |
| 973 |
}; |
| 974 |
|
| 975 |
fec1: ethernet@2188000 { |
| 976 |
compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec"; |
| 977 |
reg = <0x02188000 0x4000>; |
| 978 |
interrupt-names = "int0", "pps"; |
| 979 |
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, |
| 980 |
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; |
| 981 |
clocks = <&clks IMX6SX_CLK_ENET>, |
| 982 |
<&clks IMX6SX_CLK_ENET_AHB>, |
| 983 |
<&clks IMX6SX_CLK_ENET_PTP>, |
| 984 |
<&clks IMX6SX_CLK_ENET_REF>, |
| 985 |
<&clks IMX6SX_CLK_ENET_PTP>; |
| 986 |
clock-names = "ipg", "ahb", "ptp", |
| 987 |
"enet_clk_ref", "enet_out"; |
| 988 |
fsl,num-tx-queues = <3>; |
| 989 |
fsl,num-rx-queues = <3>; |
| 990 |
fsl,stop-mode = <&gpr 0x10 3>; |
| 991 |
status = "disabled"; |
| 992 |
}; |
| 993 |
|
| 994 |
mlb: mlb@218c000 { |
| 995 |
reg = <0x0218c000 0x4000>; |
| 996 |
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, |
| 997 |
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, |
| 998 |
<GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; |
| 999 |
clocks = <&clks IMX6SX_CLK_MLB>; |
| 1000 |
status = "disabled"; |
| 1001 |
}; |
| 1002 |
|
| 1003 |
usdhc1: mmc@2190000 { |
| 1004 |
compatible = "fsl,imx6sx-usdhc"; |
| 1005 |
reg = <0x02190000 0x4000>; |
| 1006 |
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; |
| 1007 |
clocks = <&clks IMX6SX_CLK_USDHC1>, |
| 1008 |
<&clks IMX6SX_CLK_USDHC1>, |
| 1009 |
<&clks IMX6SX_CLK_USDHC1>; |
| 1010 |
clock-names = "ipg", "ahb", "per"; |
| 1011 |
bus-width = <4>; |
| 1012 |
fsl,tuning-start-tap = <20>; |
| 1013 |
fsl,tuning-step = <2>; |
| 1014 |
status = "disabled"; |
| 1015 |
}; |
| 1016 |
|
| 1017 |
usdhc2: mmc@2194000 { |
| 1018 |
compatible = "fsl,imx6sx-usdhc"; |
| 1019 |
reg = <0x02194000 0x4000>; |
| 1020 |
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; |
| 1021 |
clocks = <&clks IMX6SX_CLK_USDHC2>, |
| 1022 |
<&clks IMX6SX_CLK_USDHC2>, |
| 1023 |
<&clks IMX6SX_CLK_USDHC2>; |
| 1024 |
clock-names = "ipg", "ahb", "per"; |
| 1025 |
bus-width = <4>; |
| 1026 |
fsl,tuning-start-tap = <20>; |
| 1027 |
fsl,tuning-step = <2>; |
| 1028 |
status = "disabled"; |
| 1029 |
}; |
| 1030 |
|
| 1031 |
usdhc3: mmc@2198000 { |
| 1032 |
compatible = "fsl,imx6sx-usdhc"; |
| 1033 |
reg = <0x02198000 0x4000>; |
| 1034 |
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; |
| 1035 |
clocks = <&clks IMX6SX_CLK_USDHC3>, |
| 1036 |
<&clks IMX6SX_CLK_USDHC3>, |
| 1037 |
<&clks IMX6SX_CLK_USDHC3>; |
| 1038 |
clock-names = "ipg", "ahb", "per"; |
| 1039 |
bus-width = <4>; |
| 1040 |
fsl,tuning-start-tap = <20>; |
| 1041 |
fsl,tuning-step = <2>; |
| 1042 |
status = "disabled"; |
| 1043 |
}; |
| 1044 |
|
| 1045 |
usdhc4: mmc@219c000 { |
| 1046 |
compatible = "fsl,imx6sx-usdhc"; |
| 1047 |
reg = <0x0219c000 0x4000>; |
| 1048 |
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
| 1049 |
clocks = <&clks IMX6SX_CLK_USDHC4>, |
| 1050 |
<&clks IMX6SX_CLK_USDHC4>, |
| 1051 |
<&clks IMX6SX_CLK_USDHC4>; |
| 1052 |
clock-names = "ipg", "ahb", "per"; |
| 1053 |
bus-width = <4>; |
| 1054 |
status = "disabled"; |
| 1055 |
}; |
| 1056 |
|
| 1057 |
i2c1: i2c@21a0000 { |
| 1058 |
#address-cells = <1>; |
| 1059 |
#size-cells = <0>; |
| 1060 |
compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; |
| 1061 |
reg = <0x021a0000 0x4000>; |
| 1062 |
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
| 1063 |
clocks = <&clks IMX6SX_CLK_I2C1>; |
| 1064 |
status = "disabled"; |
| 1065 |
}; |
| 1066 |
|
| 1067 |
i2c2: i2c@21a4000 { |
| 1068 |
#address-cells = <1>; |
| 1069 |
#size-cells = <0>; |
| 1070 |
compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; |
| 1071 |
reg = <0x021a4000 0x4000>; |
| 1072 |
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| 1073 |
clocks = <&clks IMX6SX_CLK_I2C2>; |
| 1074 |
status = "disabled"; |
| 1075 |
}; |
| 1076 |
|
| 1077 |
i2c3: i2c@21a8000 { |
| 1078 |
#address-cells = <1>; |
| 1079 |
#size-cells = <0>; |
| 1080 |
compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; |
| 1081 |
reg = <0x021a8000 0x4000>; |
| 1082 |
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; |
| 1083 |
clocks = <&clks IMX6SX_CLK_I2C3>; |
| 1084 |
status = "disabled"; |
| 1085 |
}; |
| 1086 |
|
| 1087 |
memory-controller@21b0000 { |
| 1088 |
compatible = "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc"; |
| 1089 |
reg = <0x021b0000 0x4000>; |
| 1090 |
clocks = <&clks IMX6SX_CLK_MMDC_P0_IPG>; |
| 1091 |
}; |
| 1092 |
|
| 1093 |
fec2: ethernet@21b4000 { |
| 1094 |
compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec"; |
| 1095 |
reg = <0x021b4000 0x4000>; |
| 1096 |
interrupt-names = "int0", "pps"; |
| 1097 |
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, |
| 1098 |
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; |
| 1099 |
clocks = <&clks IMX6SX_CLK_ENET>, |
| 1100 |
<&clks IMX6SX_CLK_ENET_AHB>, |
| 1101 |
<&clks IMX6SX_CLK_ENET_PTP>, |
| 1102 |
<&clks IMX6SX_CLK_ENET2_REF_125M>, |
| 1103 |
<&clks IMX6SX_CLK_ENET_PTP>; |
| 1104 |
clock-names = "ipg", "ahb", "ptp", |
| 1105 |
"enet_clk_ref", "enet_out"; |
| 1106 |
fsl,stop-mode = <&gpr 0x10 4>; |
| 1107 |
status = "disabled"; |
| 1108 |
}; |
| 1109 |
|
| 1110 |
weim: memory-controller@21b8000 { |
| 1111 |
#address-cells = <2>; |
| 1112 |
#size-cells = <1>; |
| 1113 |
compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim"; |
| 1114 |
reg = <0x021b8000 0x4000>; |
| 1115 |
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| 1116 |
clocks = <&clks IMX6SX_CLK_EIM_SLOW>; |
| 1117 |
fsl,weim-cs-gpr = <&gpr>; |
| 1118 |
status = "disabled"; |
| 1119 |
}; |
| 1120 |
|
| 1121 |
ocotp: efuse@21bc000 { |
| 1122 |
#address-cells = <1>; |
| 1123 |
#size-cells = <1>; |
| 1124 |
compatible = "fsl,imx6sx-ocotp", "syscon"; |
| 1125 |
reg = <0x021bc000 0x4000>; |
| 1126 |
clocks = <&clks IMX6SX_CLK_OCOTP>; |
| 1127 |
|
| 1128 |
cpu_speed_grade: speed-grade@10 { |
| 1129 |
reg = <0x10 4>; |
| 1130 |
}; |
| 1131 |
|
| 1132 |
tempmon_calib: calib@38 { |
| 1133 |
reg = <0x38 4>; |
| 1134 |
}; |
| 1135 |
|
| 1136 |
tempmon_temp_grade: temp-grade@20 { |
| 1137 |
reg = <0x20 4>; |
| 1138 |
}; |
| 1139 |
}; |
| 1140 |
|
| 1141 |
sai1: sai@21d4000 { |
| 1142 |
compatible = "fsl,imx6sx-sai"; |
| 1143 |
reg = <0x021d4000 0x4000>; |
| 1144 |
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; |
| 1145 |
clocks = <&clks IMX6SX_CLK_SAI1_IPG>, |
| 1146 |
<&clks IMX6SX_CLK_SAI1>, |
| 1147 |
<&clks 0>, <&clks 0>; |
| 1148 |
clock-names = "bus", "mclk1", "mclk2", "mclk3"; |
| 1149 |
dma-names = "rx", "tx"; |
| 1150 |
dmas = <&sdma 31 24 0>, <&sdma 32 24 0>; |
| 1151 |
status = "disabled"; |
| 1152 |
}; |
| 1153 |
|
| 1154 |
audmux: audmux@21d8000 { |
| 1155 |
compatible = "fsl,imx6sx-audmux", "fsl,imx31-audmux"; |
| 1156 |
reg = <0x021d8000 0x4000>; |
| 1157 |
status = "disabled"; |
| 1158 |
}; |
| 1159 |
|
| 1160 |
sai2: sai@21dc000 { |
| 1161 |
compatible = "fsl,imx6sx-sai"; |
| 1162 |
reg = <0x021dc000 0x4000>; |
| 1163 |
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; |
| 1164 |
clocks = <&clks IMX6SX_CLK_SAI2_IPG>, |
| 1165 |
<&clks IMX6SX_CLK_SAI2>, |
| 1166 |
<&clks 0>, <&clks 0>; |
| 1167 |
clock-names = "bus", "mclk1", "mclk2", "mclk3"; |
| 1168 |
dma-names = "rx", "tx"; |
| 1169 |
dmas = <&sdma 33 24 0>, <&sdma 34 24 0>; |
| 1170 |
status = "disabled"; |
| 1171 |
}; |
| 1172 |
|
| 1173 |
qspi1: spi@21e0000 { |
| 1174 |
#address-cells = <1>; |
| 1175 |
#size-cells = <0>; |
| 1176 |
compatible = "fsl,imx6sx-qspi"; |
| 1177 |
reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>; |
| 1178 |
reg-names = "QuadSPI", "QuadSPI-memory"; |
| 1179 |
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; |
| 1180 |
clocks = <&clks IMX6SX_CLK_QSPI1>, |
| 1181 |
<&clks IMX6SX_CLK_QSPI1>; |
| 1182 |
clock-names = "qspi_en", "qspi"; |
| 1183 |
status = "disabled"; |
| 1184 |
}; |
| 1185 |
|
| 1186 |
qspi2: spi@21e4000 { |
| 1187 |
#address-cells = <1>; |
| 1188 |
#size-cells = <0>; |
| 1189 |
compatible = "fsl,imx6sx-qspi"; |
| 1190 |
reg = <0x021e4000 0x4000>, <0x70000000 0x10000000>; |
| 1191 |
reg-names = "QuadSPI", "QuadSPI-memory"; |
| 1192 |
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; |
| 1193 |
clocks = <&clks IMX6SX_CLK_QSPI2>, |
| 1194 |
<&clks IMX6SX_CLK_QSPI2>; |
| 1195 |
clock-names = "qspi_en", "qspi"; |
| 1196 |
status = "disabled"; |
| 1197 |
}; |
| 1198 |
|
| 1199 |
uart2: serial@21e8000 { |
| 1200 |
compatible = "fsl,imx6sx-uart", |
| 1201 |
"fsl,imx6q-uart", "fsl,imx21-uart"; |
| 1202 |
reg = <0x021e8000 0x4000>; |
| 1203 |
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; |
| 1204 |
clocks = <&clks IMX6SX_CLK_UART_IPG>, |
| 1205 |
<&clks IMX6SX_CLK_UART_SERIAL>; |
| 1206 |
clock-names = "ipg", "per"; |
| 1207 |
dmas = <&sdma 27 4 0>, <&sdma 28 4 0>; |
| 1208 |
dma-names = "rx", "tx"; |
| 1209 |
status = "disabled"; |
| 1210 |
}; |
| 1211 |
|
| 1212 |
uart3: serial@21ec000 { |
| 1213 |
compatible = "fsl,imx6sx-uart", |
| 1214 |
"fsl,imx6q-uart", "fsl,imx21-uart"; |
| 1215 |
reg = <0x021ec000 0x4000>; |
| 1216 |
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; |
| 1217 |
clocks = <&clks IMX6SX_CLK_UART_IPG>, |
| 1218 |
<&clks IMX6SX_CLK_UART_SERIAL>; |
| 1219 |
clock-names = "ipg", "per"; |
| 1220 |
dmas = <&sdma 29 4 0>, <&sdma 30 4 0>; |
| 1221 |
dma-names = "rx", "tx"; |
| 1222 |
status = "disabled"; |
| 1223 |
}; |
| 1224 |
|
| 1225 |
uart4: serial@21f0000 { |
| 1226 |
compatible = "fsl,imx6sx-uart", |
| 1227 |
"fsl,imx6q-uart", "fsl,imx21-uart"; |
| 1228 |
reg = <0x021f0000 0x4000>; |
| 1229 |
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| 1230 |
clocks = <&clks IMX6SX_CLK_UART_IPG>, |
| 1231 |
<&clks IMX6SX_CLK_UART_SERIAL>; |
| 1232 |
clock-names = "ipg", "per"; |
| 1233 |
dmas = <&sdma 31 4 0>, <&sdma 32 4 0>; |
| 1234 |
dma-names = "rx", "tx"; |
| 1235 |
status = "disabled"; |
| 1236 |
}; |
| 1237 |
|
| 1238 |
uart5: serial@21f4000 { |
| 1239 |
compatible = "fsl,imx6sx-uart", |
| 1240 |
"fsl,imx6q-uart", "fsl,imx21-uart"; |
| 1241 |
reg = <0x021f4000 0x4000>; |
| 1242 |
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; |
| 1243 |
clocks = <&clks IMX6SX_CLK_UART_IPG>, |
| 1244 |
<&clks IMX6SX_CLK_UART_SERIAL>; |
| 1245 |
clock-names = "ipg", "per"; |
| 1246 |
dmas = <&sdma 33 4 0>, <&sdma 34 4 0>; |
| 1247 |
dma-names = "rx", "tx"; |
| 1248 |
status = "disabled"; |
| 1249 |
}; |
| 1250 |
|
| 1251 |
i2c4: i2c@21f8000 { |
| 1252 |
#address-cells = <1>; |
| 1253 |
#size-cells = <0>; |
| 1254 |
compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; |
| 1255 |
reg = <0x021f8000 0x4000>; |
| 1256 |
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| 1257 |
clocks = <&clks IMX6SX_CLK_I2C4>; |
| 1258 |
status = "disabled"; |
| 1259 |
}; |
| 1260 |
}; |
| 1261 |
|
| 1262 |
aips3: bus@2200000 { |
| 1263 |
compatible = "fsl,aips-bus", "simple-bus"; |
| 1264 |
#address-cells = <1>; |
| 1265 |
#size-cells = <1>; |
| 1266 |
reg = <0x02200000 0x100000>; |
| 1267 |
ranges; |
| 1268 |
|
| 1269 |
spba-bus@2240000 { |
| 1270 |
compatible = "fsl,spba-bus", "simple-bus"; |
| 1271 |
#address-cells = <1>; |
| 1272 |
#size-cells = <1>; |
| 1273 |
reg = <0x02240000 0x40000>; |
| 1274 |
ranges; |
| 1275 |
|
| 1276 |
csi1: csi@2214000 { |
| 1277 |
reg = <0x02214000 0x4000>; |
| 1278 |
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| 1279 |
clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>, |
| 1280 |
<&clks IMX6SX_CLK_CSI>, |
| 1281 |
<&clks IMX6SX_CLK_DCIC1>; |
| 1282 |
clock-names = "disp-axi", "csi_mclk", "dcic"; |
| 1283 |
status = "disabled"; |
| 1284 |
}; |
| 1285 |
|
| 1286 |
pxp: pxp@2218000 { |
| 1287 |
compatible = "fsl,imx6sx-pxp", "fsl,imx6ull-pxp"; |
| 1288 |
reg = <0x02218000 0x4000>; |
| 1289 |
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; |
| 1290 |
clocks = <&clks IMX6SX_CLK_PXP_AXI>; |
| 1291 |
clock-names = "axi"; |
| 1292 |
power-domains = <&pd_disp>; |
| 1293 |
status = "disabled"; |
| 1294 |
}; |
| 1295 |
|
| 1296 |
csi2: csi@221c000 { |
| 1297 |
reg = <0x0221c000 0x4000>; |
| 1298 |
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; |
| 1299 |
clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>, |
| 1300 |
<&clks IMX6SX_CLK_CSI>, |
| 1301 |
<&clks IMX6SX_CLK_DCIC2>; |
| 1302 |
clock-names = "disp-axi", "csi_mclk", "dcic"; |
| 1303 |
status = "disabled"; |
| 1304 |
}; |
| 1305 |
|
| 1306 |
lcdif1: lcdif@2220000 { |
| 1307 |
compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif"; |
| 1308 |
reg = <0x02220000 0x4000>; |
| 1309 |
interrupts = <GIC_SPI 5 IRQ_TYPE_EDGE_RISING>; |
| 1310 |
clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>, |
| 1311 |
<&clks IMX6SX_CLK_LCDIF_APB>, |
| 1312 |
<&clks IMX6SX_CLK_DISPLAY_AXI>; |
| 1313 |
clock-names = "pix", "axi", "disp_axi"; |
| 1314 |
assigned-clocks = <&clks IMX6SX_CLK_LCDIF1_PRE_SEL>, |
| 1315 |
<&clks IMX6SX_CLK_LCDIF1_SEL>; |
| 1316 |
assigned-clock-parents = <&clks IMX6SX_CLK_PLL5_VIDEO_DIV>, |
| 1317 |
<&clks IMX6SX_CLK_LCDIF1_PODF>; |
| 1318 |
power-domains = <&pd_disp>; |
| 1319 |
status = "disabled"; |
| 1320 |
|
| 1321 |
port { |
| 1322 |
lcdif1_to_ldb: endpoint { |
| 1323 |
}; |
| 1324 |
}; |
| 1325 |
}; |
| 1326 |
|
| 1327 |
lcdif2: lcdif@2224000 { |
| 1328 |
compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif"; |
| 1329 |
reg = <0x02224000 0x4000>; |
| 1330 |
interrupts = <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>; |
| 1331 |
clocks = <&clks IMX6SX_CLK_LCDIF2_PIX>, |
| 1332 |
<&clks IMX6SX_CLK_LCDIF_APB>, |
| 1333 |
<&clks IMX6SX_CLK_DISPLAY_AXI>; |
| 1334 |
clock-names = "pix", "axi", "disp_axi"; |
| 1335 |
power-domains = <&pd_disp>; |
| 1336 |
status = "disabled"; |
| 1337 |
}; |
| 1338 |
|
| 1339 |
vadc: vadc@2228000 { |
| 1340 |
reg = <0x02228000 0x4000>, <0x0222c000 0x4000>; |
| 1341 |
reg-names = "vadc-vafe", "vadc-vdec"; |
| 1342 |
clocks = <&clks IMX6SX_CLK_VADC>, |
| 1343 |
<&clks IMX6SX_CLK_CSI>; |
| 1344 |
clock-names = "vadc", "csi"; |
| 1345 |
power-domains = <&pd_disp>; |
| 1346 |
status = "disabled"; |
| 1347 |
}; |
| 1348 |
}; |
| 1349 |
|
| 1350 |
adc1: adc@2280000 { |
| 1351 |
compatible = "fsl,imx6sx-adc", "fsl,vf610-adc"; |
| 1352 |
reg = <0x02280000 0x4000>; |
| 1353 |
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; |
| 1354 |
clocks = <&clks IMX6SX_CLK_IPG>; |
| 1355 |
clock-names = "adc"; |
| 1356 |
fsl,adck-max-frequency = <30000000>, <40000000>, |
| 1357 |
<20000000>; |
| 1358 |
status = "disabled"; |
| 1359 |
}; |
| 1360 |
|
| 1361 |
adc2: adc@2284000 { |
| 1362 |
compatible = "fsl,imx6sx-adc", "fsl,vf610-adc"; |
| 1363 |
reg = <0x02284000 0x4000>; |
| 1364 |
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; |
| 1365 |
clocks = <&clks IMX6SX_CLK_IPG>; |
| 1366 |
clock-names = "adc"; |
| 1367 |
fsl,adck-max-frequency = <30000000>, <40000000>, |
| 1368 |
<20000000>; |
| 1369 |
status = "disabled"; |
| 1370 |
}; |
| 1371 |
|
| 1372 |
wdog3: watchdog@2288000 { |
| 1373 |
compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; |
| 1374 |
reg = <0x02288000 0x4000>; |
| 1375 |
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| 1376 |
clocks = <&clks IMX6SX_CLK_IPG>; |
| 1377 |
status = "disabled"; |
| 1378 |
}; |
| 1379 |
|
| 1380 |
ecspi5: spi@228c000 { |
| 1381 |
#address-cells = <1>; |
| 1382 |
#size-cells = <0>; |
| 1383 |
compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; |
| 1384 |
reg = <0x0228c000 0x4000>; |
| 1385 |
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; |
| 1386 |
clocks = <&clks IMX6SX_CLK_ECSPI5>, |
| 1387 |
<&clks IMX6SX_CLK_ECSPI5>; |
| 1388 |
clock-names = "ipg", "per"; |
| 1389 |
status = "disabled"; |
| 1390 |
}; |
| 1391 |
|
| 1392 |
uart6: serial@22a0000 { |
| 1393 |
compatible = "fsl,imx6sx-uart", |
| 1394 |
"fsl,imx6q-uart", "fsl,imx21-uart"; |
| 1395 |
reg = <0x022a0000 0x4000>; |
| 1396 |
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; |
| 1397 |
clocks = <&clks IMX6SX_CLK_UART_IPG>, |
| 1398 |
<&clks IMX6SX_CLK_UART_SERIAL>; |
| 1399 |
clock-names = "ipg", "per"; |
| 1400 |
dmas = <&sdma 0 4 0>, <&sdma 47 4 0>; |
| 1401 |
dma-names = "rx", "tx"; |
| 1402 |
status = "disabled"; |
| 1403 |
}; |
| 1404 |
|
| 1405 |
pwm5: pwm@22a4000 { |
| 1406 |
compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; |
| 1407 |
reg = <0x022a4000 0x4000>; |
| 1408 |
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; |
| 1409 |
clocks = <&clks IMX6SX_CLK_PWM5>, |
| 1410 |
<&clks IMX6SX_CLK_PWM5>; |
| 1411 |
clock-names = "ipg", "per"; |
| 1412 |
#pwm-cells = <3>; |
| 1413 |
}; |
| 1414 |
|
| 1415 |
pwm6: pwm@22a8000 { |
| 1416 |
compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; |
| 1417 |
reg = <0x022a8000 0x4000>; |
| 1418 |
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| 1419 |
clocks = <&clks IMX6SX_CLK_PWM6>, |
| 1420 |
<&clks IMX6SX_CLK_PWM6>; |
| 1421 |
clock-names = "ipg", "per"; |
| 1422 |
#pwm-cells = <3>; |
| 1423 |
}; |
| 1424 |
|
| 1425 |
pwm7: pwm@22ac000 { |
| 1426 |
compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; |
| 1427 |
reg = <0x022ac000 0x4000>; |
| 1428 |
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; |
| 1429 |
clocks = <&clks IMX6SX_CLK_PWM7>, |
| 1430 |
<&clks IMX6SX_CLK_PWM7>; |
| 1431 |
clock-names = "ipg", "per"; |
| 1432 |
#pwm-cells = <3>; |
| 1433 |
}; |
| 1434 |
|
| 1435 |
pwm8: pwm@22b0000 { |
| 1436 |
compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; |
| 1437 |
reg = <0x022b0000 0x4000>; |
| 1438 |
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| 1439 |
clocks = <&clks IMX6SX_CLK_PWM8>, |
| 1440 |
<&clks IMX6SX_CLK_PWM8>; |
| 1441 |
clock-names = "ipg", "per"; |
| 1442 |
#pwm-cells = <3>; |
| 1443 |
}; |
| 1444 |
}; |
| 1445 |
|
| 1446 |
pcie: pcie@8ffc000 { |
| 1447 |
compatible = "fsl,imx6sx-pcie"; |
| 1448 |
reg = <0x08ffc000 0x04000>, <0x08f00000 0x80000>; |
| 1449 |
reg-names = "dbi", "config"; |
| 1450 |
#address-cells = <3>; |
| 1451 |
#size-cells = <2>; |
| 1452 |
device_type = "pci"; |
| 1453 |
bus-range = <0x00 0xff>; |
| 1454 |
ranges = <0x81000000 0 0 0x08f80000 0 0x00010000>, /* downstream I/O */ |
| 1455 |
<0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */ |
| 1456 |
num-lanes = <1>; |
| 1457 |
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; |
| 1458 |
interrupt-names = "msi"; |
| 1459 |
#interrupt-cells = <1>; |
| 1460 |
interrupt-map-mask = <0 0 0 0x7>; |
| 1461 |
interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, |
| 1462 |
<0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, |
| 1463 |
<0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, |
| 1464 |
<0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; |
| 1465 |
clocks = <&clks IMX6SX_CLK_PCIE_AXI>, |
| 1466 |
<&clks IMX6SX_CLK_LVDS1_OUT>, |
| 1467 |
<&clks IMX6SX_CLK_PCIE_REF_125M>, |
| 1468 |
<&clks IMX6SX_CLK_DISPLAY_AXI>; |
| 1469 |
clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_inbound_axi"; |
| 1470 |
power-domains = <&pd_disp>, <&pd_pci>; |
| 1471 |
power-domain-names = "pcie", "pcie_phy"; |
| 1472 |
status = "disabled"; |
| 1473 |
}; |
| 1474 |
}; |
| 1475 |
}; |