| 1 |
// SPDX-License-Identifier: GPL-2.0+ |
| 2 |
// |
| 3 |
// Copyright 2013 Greg Ungerer <[email protected]> |
| 4 |
// Copyright 2011 Freescale Semiconductor, Inc. |
| 5 |
// Copyright 2011 Linaro Ltd. |
| 6 |
|
| 7 |
#include "imx50-pinfunc.h" |
| 8 |
#include <dt-bindings/gpio/gpio.h> |
| 9 |
#include <dt-bindings/clock/imx5-clock.h> |
| 10 |
|
| 11 |
/ { |
| 12 |
#address-cells = <1>; |
| 13 |
#size-cells = <1>; |
| 14 |
/* |
| 15 |
* The decompressor and also some bootloaders rely on a |
| 16 |
* pre-existing /chosen node to be available to insert the |
| 17 |
* command line and merge other ATAGS info. |
| 18 |
*/ |
| 19 |
chosen {}; |
| 20 |
|
| 21 |
aliases { |
| 22 |
ethernet0 = &fec; |
| 23 |
gpio0 = &gpio1; |
| 24 |
gpio1 = &gpio2; |
| 25 |
gpio2 = &gpio3; |
| 26 |
gpio3 = &gpio4; |
| 27 |
gpio4 = &gpio5; |
| 28 |
gpio5 = &gpio6; |
| 29 |
i2c0 = &i2c1; |
| 30 |
i2c1 = &i2c2; |
| 31 |
i2c2 = &i2c3; |
| 32 |
mmc0 = &esdhc1; |
| 33 |
mmc1 = &esdhc2; |
| 34 |
mmc2 = &esdhc3; |
| 35 |
mmc3 = &esdhc4; |
| 36 |
serial0 = &uart1; |
| 37 |
serial1 = &uart2; |
| 38 |
serial2 = &uart3; |
| 39 |
serial3 = &uart4; |
| 40 |
serial4 = &uart5; |
| 41 |
spi0 = &ecspi1; |
| 42 |
spi1 = &ecspi2; |
| 43 |
spi2 = &cspi; |
| 44 |
}; |
| 45 |
|
| 46 |
cpus { |
| 47 |
#address-cells = <1>; |
| 48 |
#size-cells = <0>; |
| 49 |
cpu@0 { |
| 50 |
device_type = "cpu"; |
| 51 |
compatible = "arm,cortex-a8"; |
| 52 |
reg = <0x0>; |
| 53 |
}; |
| 54 |
}; |
| 55 |
|
| 56 |
tzic: tz-interrupt-controller@fffc000 { |
| 57 |
compatible = "fsl,imx50-tzic", "fsl,imx53-tzic", "fsl,tzic"; |
| 58 |
interrupt-controller; |
| 59 |
#interrupt-cells = <1>; |
| 60 |
reg = <0x0fffc000 0x4000>; |
| 61 |
}; |
| 62 |
|
| 63 |
clocks { |
| 64 |
ckil { |
| 65 |
compatible = "fixed-clock"; |
| 66 |
#clock-cells = <0>; |
| 67 |
clock-frequency = <32768>; |
| 68 |
}; |
| 69 |
|
| 70 |
ckih1 { |
| 71 |
compatible = "fixed-clock"; |
| 72 |
#clock-cells = <0>; |
| 73 |
clock-frequency = <22579200>; |
| 74 |
}; |
| 75 |
|
| 76 |
ckih2 { |
| 77 |
compatible = "fixed-clock"; |
| 78 |
#clock-cells = <0>; |
| 79 |
clock-frequency = <0>; |
| 80 |
}; |
| 81 |
|
| 82 |
osc { |
| 83 |
compatible = "fixed-clock"; |
| 84 |
#clock-cells = <0>; |
| 85 |
clock-frequency = <24000000>; |
| 86 |
}; |
| 87 |
}; |
| 88 |
|
| 89 |
usbphy0: usbphy-0 { |
| 90 |
compatible = "usb-nop-xceiv"; |
| 91 |
clocks = <&clks IMX5_CLK_USB_PHY1_GATE>; |
| 92 |
clock-names = "main_clk"; |
| 93 |
#phy-cells = <0>; |
| 94 |
status = "okay"; |
| 95 |
}; |
| 96 |
|
| 97 |
soc: soc { |
| 98 |
#address-cells = <1>; |
| 99 |
#size-cells = <1>; |
| 100 |
compatible = "simple-bus"; |
| 101 |
interrupt-parent = <&tzic>; |
| 102 |
ranges; |
| 103 |
|
| 104 |
aips1: bus@50000000 { /* AIPS1 */ |
| 105 |
compatible = "fsl,aips-bus", "simple-bus"; |
| 106 |
#address-cells = <1>; |
| 107 |
#size-cells = <1>; |
| 108 |
reg = <0x50000000 0x10000000>; |
| 109 |
ranges; |
| 110 |
|
| 111 |
spba-bus@50000000 { |
| 112 |
compatible = "fsl,spba-bus", "simple-bus"; |
| 113 |
#address-cells = <1>; |
| 114 |
#size-cells = <1>; |
| 115 |
reg = <0x50000000 0x40000>; |
| 116 |
ranges; |
| 117 |
|
| 118 |
esdhc1: mmc@50004000 { |
| 119 |
compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc"; |
| 120 |
reg = <0x50004000 0x4000>; |
| 121 |
interrupts = <1>; |
| 122 |
clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>, |
| 123 |
<&clks IMX5_CLK_DUMMY>, |
| 124 |
<&clks IMX5_CLK_ESDHC1_PER_GATE>; |
| 125 |
clock-names = "ipg", "ahb", "per"; |
| 126 |
bus-width = <4>; |
| 127 |
status = "disabled"; |
| 128 |
}; |
| 129 |
|
| 130 |
esdhc2: mmc@50008000 { |
| 131 |
compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc"; |
| 132 |
reg = <0x50008000 0x4000>; |
| 133 |
interrupts = <2>; |
| 134 |
clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>, |
| 135 |
<&clks IMX5_CLK_DUMMY>, |
| 136 |
<&clks IMX5_CLK_ESDHC2_PER_GATE>; |
| 137 |
clock-names = "ipg", "ahb", "per"; |
| 138 |
bus-width = <4>; |
| 139 |
status = "disabled"; |
| 140 |
}; |
| 141 |
|
| 142 |
uart3: serial@5000c000 { |
| 143 |
compatible = "fsl,imx50-uart", "fsl,imx21-uart"; |
| 144 |
reg = <0x5000c000 0x4000>; |
| 145 |
interrupts = <33>; |
| 146 |
clocks = <&clks IMX5_CLK_UART3_IPG_GATE>, |
| 147 |
<&clks IMX5_CLK_UART3_PER_GATE>; |
| 148 |
clock-names = "ipg", "per"; |
| 149 |
status = "disabled"; |
| 150 |
}; |
| 151 |
|
| 152 |
ecspi1: spi@50010000 { |
| 153 |
#address-cells = <1>; |
| 154 |
#size-cells = <0>; |
| 155 |
compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi"; |
| 156 |
reg = <0x50010000 0x4000>; |
| 157 |
interrupts = <36>; |
| 158 |
clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>, |
| 159 |
<&clks IMX5_CLK_ECSPI1_PER_GATE>; |
| 160 |
clock-names = "ipg", "per"; |
| 161 |
status = "disabled"; |
| 162 |
}; |
| 163 |
|
| 164 |
ssi2: ssi@50014000 { |
| 165 |
#sound-dai-cells = <0>; |
| 166 |
compatible = "fsl,imx50-ssi", |
| 167 |
"fsl,imx51-ssi", |
| 168 |
"fsl,imx21-ssi"; |
| 169 |
reg = <0x50014000 0x4000>; |
| 170 |
interrupts = <30>; |
| 171 |
clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>; |
| 172 |
dmas = <&sdma 24 1 0>, |
| 173 |
<&sdma 25 1 0>; |
| 174 |
dma-names = "rx", "tx"; |
| 175 |
fsl,fifo-depth = <15>; |
| 176 |
status = "disabled"; |
| 177 |
}; |
| 178 |
|
| 179 |
esdhc3: mmc@50020000 { |
| 180 |
compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc"; |
| 181 |
reg = <0x50020000 0x4000>; |
| 182 |
interrupts = <3>; |
| 183 |
clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>, |
| 184 |
<&clks IMX5_CLK_DUMMY>, |
| 185 |
<&clks IMX5_CLK_ESDHC3_PER_GATE>; |
| 186 |
clock-names = "ipg", "ahb", "per"; |
| 187 |
bus-width = <4>; |
| 188 |
status = "disabled"; |
| 189 |
}; |
| 190 |
|
| 191 |
esdhc4: mmc@50024000 { |
| 192 |
compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc"; |
| 193 |
reg = <0x50024000 0x4000>; |
| 194 |
interrupts = <4>; |
| 195 |
clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>, |
| 196 |
<&clks IMX5_CLK_DUMMY>, |
| 197 |
<&clks IMX5_CLK_ESDHC4_PER_GATE>; |
| 198 |
clock-names = "ipg", "ahb", "per"; |
| 199 |
bus-width = <4>; |
| 200 |
status = "disabled"; |
| 201 |
}; |
| 202 |
}; |
| 203 |
|
| 204 |
usbotg: usb@53f80000 { |
| 205 |
compatible = "fsl,imx50-usb", "fsl,imx27-usb"; |
| 206 |
reg = <0x53f80000 0x0200>; |
| 207 |
interrupts = <18>; |
| 208 |
clocks = <&clks IMX5_CLK_USBOH3_GATE>; |
| 209 |
fsl,usbphy = <&usbphy0>; |
| 210 |
status = "disabled"; |
| 211 |
}; |
| 212 |
|
| 213 |
usbh1: usb@53f80200 { |
| 214 |
compatible = "fsl,imx50-usb", "fsl,imx27-usb"; |
| 215 |
reg = <0x53f80200 0x0200>; |
| 216 |
interrupts = <14>; |
| 217 |
clocks = <&clks IMX5_CLK_USB_PHY2_GATE>; |
| 218 |
dr_mode = "host"; |
| 219 |
status = "disabled"; |
| 220 |
}; |
| 221 |
|
| 222 |
gpio1: gpio@53f84000 { |
| 223 |
compatible = "fsl,imx50-gpio", "fsl,imx35-gpio"; |
| 224 |
reg = <0x53f84000 0x4000>; |
| 225 |
interrupts = <50 51>; |
| 226 |
gpio-controller; |
| 227 |
#gpio-cells = <2>; |
| 228 |
interrupt-controller; |
| 229 |
#interrupt-cells = <2>; |
| 230 |
gpio-ranges = <&iomuxc 0 151 28>; |
| 231 |
}; |
| 232 |
|
| 233 |
gpio2: gpio@53f88000 { |
| 234 |
compatible = "fsl,imx50-gpio", "fsl,imx35-gpio"; |
| 235 |
reg = <0x53f88000 0x4000>; |
| 236 |
interrupts = <52 53>; |
| 237 |
gpio-controller; |
| 238 |
#gpio-cells = <2>; |
| 239 |
interrupt-controller; |
| 240 |
#interrupt-cells = <2>; |
| 241 |
gpio-ranges = <&iomuxc 0 75 8>, <&iomuxc 8 100 8>, |
| 242 |
<&iomuxc 16 83 1>, <&iomuxc 17 85 1>, |
| 243 |
<&iomuxc 18 87 1>, <&iomuxc 19 84 1>, |
| 244 |
<&iomuxc 20 88 1>, <&iomuxc 21 86 1>; |
| 245 |
}; |
| 246 |
|
| 247 |
gpio3: gpio@53f8c000 { |
| 248 |
compatible = "fsl,imx50-gpio", "fsl,imx35-gpio"; |
| 249 |
reg = <0x53f8c000 0x4000>; |
| 250 |
interrupts = <54 55>; |
| 251 |
gpio-controller; |
| 252 |
#gpio-cells = <2>; |
| 253 |
interrupt-controller; |
| 254 |
#interrupt-cells = <2>; |
| 255 |
gpio-ranges = <&iomuxc 0 108 32>; |
| 256 |
}; |
| 257 |
|
| 258 |
gpio4: gpio@53f90000 { |
| 259 |
compatible = "fsl,imx50-gpio", "fsl,imx35-gpio"; |
| 260 |
reg = <0x53f90000 0x4000>; |
| 261 |
interrupts = <56 57>; |
| 262 |
gpio-controller; |
| 263 |
#gpio-cells = <2>; |
| 264 |
interrupt-controller; |
| 265 |
#interrupt-cells = <2>; |
| 266 |
gpio-ranges = <&iomuxc 0 8 8>, <&iomuxc 8 45 12>, |
| 267 |
<&iomuxc 20 140 11>; |
| 268 |
}; |
| 269 |
|
| 270 |
wdog1: watchdog@53f98000 { |
| 271 |
compatible = "fsl,imx50-wdt", "fsl,imx21-wdt"; |
| 272 |
reg = <0x53f98000 0x4000>; |
| 273 |
interrupts = <58>; |
| 274 |
clocks = <&clks IMX5_CLK_DUMMY>; |
| 275 |
}; |
| 276 |
|
| 277 |
gpt: timer@53fa0000 { |
| 278 |
compatible = "fsl,imx50-gpt", "fsl,imx31-gpt"; |
| 279 |
reg = <0x53fa0000 0x4000>; |
| 280 |
interrupts = <39>; |
| 281 |
clocks = <&clks IMX5_CLK_GPT_IPG_GATE>, |
| 282 |
<&clks IMX5_CLK_GPT_HF_GATE>; |
| 283 |
clock-names = "ipg", "per"; |
| 284 |
}; |
| 285 |
|
| 286 |
iomuxc: pinctrl@53fa8000 { |
| 287 |
compatible = "fsl,imx50-iomuxc", "fsl,imx53-iomuxc"; |
| 288 |
reg = <0x53fa8000 0x4000>; |
| 289 |
}; |
| 290 |
|
| 291 |
pwm1: pwm@53fb4000 { |
| 292 |
#pwm-cells = <3>; |
| 293 |
compatible = "fsl,imx50-pwm", "fsl,imx27-pwm"; |
| 294 |
reg = <0x53fb4000 0x4000>; |
| 295 |
clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>, |
| 296 |
<&clks IMX5_CLK_PWM1_HF_GATE>; |
| 297 |
clock-names = "ipg", "per"; |
| 298 |
interrupts = <61>; |
| 299 |
}; |
| 300 |
|
| 301 |
pwm2: pwm@53fb8000 { |
| 302 |
#pwm-cells = <3>; |
| 303 |
compatible = "fsl,imx50-pwm", "fsl,imx27-pwm"; |
| 304 |
reg = <0x53fb8000 0x4000>; |
| 305 |
clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>, |
| 306 |
<&clks IMX5_CLK_PWM2_HF_GATE>; |
| 307 |
clock-names = "ipg", "per"; |
| 308 |
interrupts = <94>; |
| 309 |
}; |
| 310 |
|
| 311 |
uart1: serial@53fbc000 { |
| 312 |
compatible = "fsl,imx50-uart", "fsl,imx21-uart"; |
| 313 |
reg = <0x53fbc000 0x4000>; |
| 314 |
interrupts = <31>; |
| 315 |
clocks = <&clks IMX5_CLK_UART1_IPG_GATE>, |
| 316 |
<&clks IMX5_CLK_UART1_PER_GATE>; |
| 317 |
clock-names = "ipg", "per"; |
| 318 |
status = "disabled"; |
| 319 |
}; |
| 320 |
|
| 321 |
uart2: serial@53fc0000 { |
| 322 |
compatible = "fsl,imx50-uart", "fsl,imx21-uart"; |
| 323 |
reg = <0x53fc0000 0x4000>; |
| 324 |
interrupts = <32>; |
| 325 |
clocks = <&clks IMX5_CLK_UART2_IPG_GATE>, |
| 326 |
<&clks IMX5_CLK_UART2_PER_GATE>; |
| 327 |
clock-names = "ipg", "per"; |
| 328 |
status = "disabled"; |
| 329 |
}; |
| 330 |
|
| 331 |
src: reset-controller@53fd0000 { |
| 332 |
compatible = "fsl,imx50-src", "fsl,imx51-src"; |
| 333 |
reg = <0x53fd0000 0x4000>; |
| 334 |
interrupts = <75>; |
| 335 |
#reset-cells = <1>; |
| 336 |
}; |
| 337 |
|
| 338 |
clks: ccm@53fd4000 { |
| 339 |
compatible = "fsl,imx50-ccm"; |
| 340 |
reg = <0x53fd4000 0x4000>; |
| 341 |
interrupts = <71>, <72>; |
| 342 |
#clock-cells = <1>; |
| 343 |
}; |
| 344 |
|
| 345 |
gpio5: gpio@53fdc000 { |
| 346 |
compatible = "fsl,imx50-gpio", "fsl,imx35-gpio"; |
| 347 |
reg = <0x53fdc000 0x4000>; |
| 348 |
interrupts = <103 104>; |
| 349 |
gpio-controller; |
| 350 |
#gpio-cells = <2>; |
| 351 |
interrupt-controller; |
| 352 |
#interrupt-cells = <2>; |
| 353 |
gpio-ranges = <&iomuxc 0 57 18>, <&iomuxc 18 89 11>; |
| 354 |
}; |
| 355 |
|
| 356 |
gpio6: gpio@53fe0000 { |
| 357 |
compatible = "fsl,imx50-gpio", "fsl,imx35-gpio"; |
| 358 |
reg = <0x53fe0000 0x4000>; |
| 359 |
interrupts = <105 106>; |
| 360 |
gpio-controller; |
| 361 |
#gpio-cells = <2>; |
| 362 |
interrupt-controller; |
| 363 |
#interrupt-cells = <2>; |
| 364 |
gpio-ranges = <&iomuxc 0 27 18>, <&iomuxc 18 16 11>; |
| 365 |
}; |
| 366 |
|
| 367 |
i2c3: i2c@53fec000 { |
| 368 |
#address-cells = <1>; |
| 369 |
#size-cells = <0>; |
| 370 |
compatible = "fsl,imx50-i2c", "fsl,imx21-i2c"; |
| 371 |
reg = <0x53fec000 0x4000>; |
| 372 |
interrupts = <64>; |
| 373 |
clocks = <&clks IMX5_CLK_I2C3_GATE>; |
| 374 |
status = "disabled"; |
| 375 |
}; |
| 376 |
|
| 377 |
uart4: serial@53ff0000 { |
| 378 |
compatible = "fsl,imx50-uart", "fsl,imx21-uart"; |
| 379 |
reg = <0x53ff0000 0x4000>; |
| 380 |
interrupts = <13>; |
| 381 |
clocks = <&clks IMX5_CLK_UART4_IPG_GATE>, |
| 382 |
<&clks IMX5_CLK_UART4_PER_GATE>; |
| 383 |
clock-names = "ipg", "per"; |
| 384 |
status = "disabled"; |
| 385 |
}; |
| 386 |
}; |
| 387 |
|
| 388 |
aips2: bus@60000000 { /* AIPS2 */ |
| 389 |
compatible = "fsl,aips-bus", "simple-bus"; |
| 390 |
#address-cells = <1>; |
| 391 |
#size-cells = <1>; |
| 392 |
reg = <0x60000000 0x10000000>; |
| 393 |
ranges; |
| 394 |
|
| 395 |
uart5: serial@63f90000 { |
| 396 |
compatible = "fsl,imx50-uart", "fsl,imx21-uart"; |
| 397 |
reg = <0x63f90000 0x4000>; |
| 398 |
interrupts = <86>; |
| 399 |
clocks = <&clks IMX5_CLK_UART5_IPG_GATE>, |
| 400 |
<&clks IMX5_CLK_UART5_PER_GATE>; |
| 401 |
clock-names = "ipg", "per"; |
| 402 |
status = "disabled"; |
| 403 |
}; |
| 404 |
|
| 405 |
owire: owire@63fa4000 { |
| 406 |
compatible = "fsl,imx50-owire", "fsl,imx21-owire"; |
| 407 |
reg = <0x63fa4000 0x4000>; |
| 408 |
clocks = <&clks IMX5_CLK_OWIRE_GATE>; |
| 409 |
status = "disabled"; |
| 410 |
}; |
| 411 |
|
| 412 |
ecspi2: spi@63fac000 { |
| 413 |
#address-cells = <1>; |
| 414 |
#size-cells = <0>; |
| 415 |
compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi"; |
| 416 |
reg = <0x63fac000 0x4000>; |
| 417 |
interrupts = <37>; |
| 418 |
clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>, |
| 419 |
<&clks IMX5_CLK_ECSPI2_PER_GATE>; |
| 420 |
clock-names = "ipg", "per"; |
| 421 |
status = "disabled"; |
| 422 |
}; |
| 423 |
|
| 424 |
sdma: dma-controller@63fb0000 { |
| 425 |
compatible = "fsl,imx50-sdma", "fsl,imx35-sdma"; |
| 426 |
reg = <0x63fb0000 0x4000>; |
| 427 |
interrupts = <6>; |
| 428 |
clocks = <&clks IMX5_CLK_SDMA_GATE>, |
| 429 |
<&clks IMX5_CLK_AHB>; |
| 430 |
clock-names = "ipg", "ahb"; |
| 431 |
#dma-cells = <3>; |
| 432 |
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin"; |
| 433 |
}; |
| 434 |
|
| 435 |
cspi: spi@63fc0000 { |
| 436 |
#address-cells = <1>; |
| 437 |
#size-cells = <0>; |
| 438 |
compatible = "fsl,imx50-cspi", "fsl,imx35-cspi"; |
| 439 |
reg = <0x63fc0000 0x4000>; |
| 440 |
interrupts = <38>; |
| 441 |
clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>, |
| 442 |
<&clks IMX5_CLK_CSPI_IPG_GATE>; |
| 443 |
clock-names = "ipg", "per"; |
| 444 |
status = "disabled"; |
| 445 |
}; |
| 446 |
|
| 447 |
i2c2: i2c@63fc4000 { |
| 448 |
#address-cells = <1>; |
| 449 |
#size-cells = <0>; |
| 450 |
compatible = "fsl,imx50-i2c", "fsl,imx21-i2c"; |
| 451 |
reg = <0x63fc4000 0x4000>; |
| 452 |
interrupts = <63>; |
| 453 |
clocks = <&clks IMX5_CLK_I2C2_GATE>; |
| 454 |
status = "disabled"; |
| 455 |
}; |
| 456 |
|
| 457 |
i2c1: i2c@63fc8000 { |
| 458 |
#address-cells = <1>; |
| 459 |
#size-cells = <0>; |
| 460 |
compatible = "fsl,imx50-i2c", "fsl,imx21-i2c"; |
| 461 |
reg = <0x63fc8000 0x4000>; |
| 462 |
interrupts = <62>; |
| 463 |
clocks = <&clks IMX5_CLK_I2C1_GATE>; |
| 464 |
status = "disabled"; |
| 465 |
}; |
| 466 |
|
| 467 |
ssi1: ssi@63fcc000 { |
| 468 |
#sound-dai-cells = <0>; |
| 469 |
compatible = "fsl,imx50-ssi", "fsl,imx51-ssi", |
| 470 |
"fsl,imx21-ssi"; |
| 471 |
reg = <0x63fcc000 0x4000>; |
| 472 |
interrupts = <29>; |
| 473 |
clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>; |
| 474 |
dmas = <&sdma 28 0 0>, |
| 475 |
<&sdma 29 0 0>; |
| 476 |
dma-names = "rx", "tx"; |
| 477 |
fsl,fifo-depth = <15>; |
| 478 |
status = "disabled"; |
| 479 |
}; |
| 480 |
|
| 481 |
audmux: audmux@63fd0000 { |
| 482 |
compatible = "fsl,imx50-audmux", "fsl,imx31-audmux"; |
| 483 |
reg = <0x63fd0000 0x4000>; |
| 484 |
status = "disabled"; |
| 485 |
}; |
| 486 |
|
| 487 |
fec: ethernet@63fec000 { |
| 488 |
compatible = "fsl,imx53-fec", "fsl,imx25-fec"; |
| 489 |
reg = <0x63fec000 0x4000>; |
| 490 |
interrupts = <87>; |
| 491 |
clocks = <&clks IMX5_CLK_FEC_GATE>, |
| 492 |
<&clks IMX5_CLK_FEC_GATE>, |
| 493 |
<&clks IMX5_CLK_FEC_GATE>; |
| 494 |
clock-names = "ipg", "ahb", "ptp"; |
| 495 |
status = "disabled"; |
| 496 |
}; |
| 497 |
}; |
| 498 |
}; |
| 499 |
}; |