| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
| 2 |
/* |
| 3 |
* Copyright 2022 Toradex |
| 4 |
*/ |
| 5 |
|
| 6 |
/* Colibri AD0 to AD3 */ |
| 7 |
&adc1 { |
| 8 |
status = "okay"; |
| 9 |
}; |
| 10 |
|
| 11 |
/* |
| 12 |
* The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3. |
| 13 |
* So if you enable following capacitive touch controller, disable pwm2/pwm3 first. |
| 14 |
*/ |
| 15 |
&atmel_mxt_ts { |
| 16 |
interrupt-parent = <&gpio1>; |
| 17 |
interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 / INT */ |
| 18 |
pinctrl-0 = <&pinctrl_atmel_adapter>; |
| 19 |
reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* SODIMM 30 / RST */ |
| 20 |
}; |
| 21 |
|
| 22 |
/* Colibri SSP */ |
| 23 |
&ecspi3 { |
| 24 |
status = "okay"; |
| 25 |
}; |
| 26 |
|
| 27 |
/* Colibri Fast Ethernet */ |
| 28 |
&fec1 { |
| 29 |
status = "okay"; |
| 30 |
}; |
| 31 |
|
| 32 |
&gpio2 { |
| 33 |
/* |
| 34 |
* uart25 turns the UART transceiver for UART2 and 5 on. If one wants to turn the |
| 35 |
* transceiver off, that property has to be deleted and the gpio handled in userspace. |
| 36 |
* The same applies to uart1_tx_on where the UART1 transceiver is turned on. |
| 37 |
*/ |
| 38 |
uart25-tx-on-hog { |
| 39 |
gpio-hog; |
| 40 |
gpios = <27 GPIO_ACTIVE_HIGH>; /* SODIMM 104 */ |
| 41 |
output-high; |
| 42 |
}; |
| 43 |
}; |
| 44 |
|
| 45 |
&gpio5 { |
| 46 |
uart1-tx-on-hog { |
| 47 |
gpio-hog; |
| 48 |
gpios = <17 GPIO_ACTIVE_HIGH>; /* SODIMM 102 */ |
| 49 |
output-high; |
| 50 |
}; |
| 51 |
}; |
| 52 |
|
| 53 |
/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */ |
| 54 |
&i2c4 { |
| 55 |
status = "okay"; |
| 56 |
}; |
| 57 |
|
| 58 |
/* Colibri PWM<A> */ |
| 59 |
&pwm1 { |
| 60 |
status = "okay"; |
| 61 |
}; |
| 62 |
|
| 63 |
/* Colibri PWM<B> */ |
| 64 |
&pwm2 { |
| 65 |
/* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */ |
| 66 |
status = "okay"; |
| 67 |
}; |
| 68 |
|
| 69 |
/* Colibri PWM<C> */ |
| 70 |
&pwm3 { |
| 71 |
/* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */ |
| 72 |
status = "okay"; |
| 73 |
}; |
| 74 |
|
| 75 |
/* Colibri PWM<D> */ |
| 76 |
&pwm4 { |
| 77 |
status = "okay"; |
| 78 |
}; |
| 79 |
|
| 80 |
/* M41T0M6 real time clock */ |
| 81 |
&rtc { |
| 82 |
status = "okay"; |
| 83 |
}; |
| 84 |
|
| 85 |
/* Colibri UART_A */ |
| 86 |
&uart1 { |
| 87 |
status = "okay"; |
| 88 |
}; |
| 89 |
|
| 90 |
/* Colibri UART_B */ |
| 91 |
&uart2 { |
| 92 |
status = "okay"; |
| 93 |
}; |
| 94 |
|
| 95 |
/* Colibri UART_C */ |
| 96 |
&uart3 { |
| 97 |
status = "okay"; |
| 98 |
}; |
| 99 |
|
| 100 |
/* Colibri USBC */ |
| 101 |
&usbotg1 { |
| 102 |
disable-over-current; |
| 103 |
status = "okay"; |
| 104 |
}; |
| 105 |
|
| 106 |
/* Colibri MMC/SD */ |
| 107 |
&usdhc1 { |
| 108 |
status = "okay"; |
| 109 |
}; |