| 1 |
// SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| 2 |
// |
| 3 |
// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <[email protected]> |
| 4 |
|
| 5 |
/dts-v1/; |
| 6 |
#include "imx6q.dtsi" |
| 7 |
#include "imx6qdl-skov-cpu.dtsi" |
| 8 |
|
| 9 |
/ { |
| 10 |
model = "SKOV IMX6 CPU QuadCore"; |
| 11 |
compatible = "skov,imx6q-skov-reve-mi1010ait-1cp1", "fsl,imx6q"; |
| 12 |
|
| 13 |
backlight: backlight { |
| 14 |
compatible = "pwm-backlight"; |
| 15 |
pinctrl-names = "default"; |
| 16 |
pinctrl-0 = <&pinctrl_backlight>; |
| 17 |
enable-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>; |
| 18 |
pwms = <&pwm2 0 20000 0>; |
| 19 |
brightness-levels = <0 255>; |
| 20 |
num-interpolated-steps = <17>; |
| 21 |
default-brightness-level = <8>; |
| 22 |
power-supply = <®_24v0>; |
| 23 |
}; |
| 24 |
|
| 25 |
panel { |
| 26 |
compatible = "multi-inno,mi1010ait-1cp"; |
| 27 |
backlight = <&backlight>; |
| 28 |
power-supply = <®_3v3>; |
| 29 |
|
| 30 |
port { |
| 31 |
panel_in: endpoint { |
| 32 |
remote-endpoint = <&lvds0_out>; |
| 33 |
}; |
| 34 |
}; |
| 35 |
}; |
| 36 |
}; |
| 37 |
|
| 38 |
&clks { |
| 39 |
assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, |
| 40 |
<&clks IMX6QDL_CLK_LDB_DI1_SEL>, <&clks IMX6QDL_CLK_ENET_REF_SEL>; |
| 41 |
assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, |
| 42 |
<&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, <&clk50m_phy>; |
| 43 |
}; |
| 44 |
|
| 45 |
&hdmi { |
| 46 |
ddc-i2c-bus = <&i2c2>; |
| 47 |
status = "okay"; |
| 48 |
}; |
| 49 |
|
| 50 |
&i2c1 { |
| 51 |
pinctrl-names = "default"; |
| 52 |
pinctrl-0 = <&pinctrl_i2c1>; |
| 53 |
clock-frequency = <100000>; |
| 54 |
status = "okay"; |
| 55 |
|
| 56 |
touchscreen@38 { |
| 57 |
compatible = "edt,edt-ft5406"; |
| 58 |
reg = <0x38>; |
| 59 |
pinctrl-names = "default"; |
| 60 |
pinctrl-0 = <&pinctrl_touchscreen>; |
| 61 |
interrupt-parent = <&gpio3>; |
| 62 |
interrupts = <19 IRQ_TYPE_EDGE_FALLING>; |
| 63 |
reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; |
| 64 |
touchscreen-size-x = <1280>; |
| 65 |
touchscreen-size-y = <800>; |
| 66 |
wakeup-source; |
| 67 |
}; |
| 68 |
}; |
| 69 |
|
| 70 |
&i2c2 { |
| 71 |
pinctrl-names = "default"; |
| 72 |
pinctrl-0 = <&pinctrl_i2c2>; |
| 73 |
clock-frequency = <100000>; |
| 74 |
status = "okay"; |
| 75 |
}; |
| 76 |
|
| 77 |
&ldb { |
| 78 |
status = "okay"; |
| 79 |
|
| 80 |
lvds-channel@0 { |
| 81 |
status = "okay"; |
| 82 |
|
| 83 |
port@4 { |
| 84 |
reg = <4>; |
| 85 |
|
| 86 |
lvds0_out: endpoint { |
| 87 |
remote-endpoint = <&panel_in>; |
| 88 |
}; |
| 89 |
}; |
| 90 |
}; |
| 91 |
}; |
| 92 |
|
| 93 |
&iomuxc { |
| 94 |
pinctrl_backlight: backlightgrp { |
| 95 |
fsl,pins = < |
| 96 |
MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x58 |
| 97 |
>; |
| 98 |
}; |
| 99 |
|
| 100 |
pinctrl_i2c1: i2c1grp { |
| 101 |
fsl,pins = < |
| 102 |
/* external 1 k pull up */ |
| 103 |
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x40010878 |
| 104 |
/* external 1 k pull up */ |
| 105 |
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x40010878 |
| 106 |
>; |
| 107 |
}; |
| 108 |
|
| 109 |
pinctrl_i2c2: i2c2grp { |
| 110 |
fsl,pins = < |
| 111 |
/* internal 22 k pull up required */ |
| 112 |
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001F878 |
| 113 |
/* internal 22 k pull up required */ |
| 114 |
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001F878 |
| 115 |
>; |
| 116 |
}; |
| 117 |
|
| 118 |
pinctrl_touchscreen: touchscreengrp { |
| 119 |
fsl,pins = < |
| 120 |
/* external 10 k pull up */ |
| 121 |
/* CTP_INT */ |
| 122 |
MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 |
| 123 |
/* CTP_RST */ |
| 124 |
MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0 |
| 125 |
>; |
| 126 |
}; |
| 127 |
}; |
| 128 |
|
| 129 |
®_tft_vcom { |
| 130 |
regulator-min-microvolt = <3160000>; |
| 131 |
regulator-max-microvolt = <3160000>; |
| 132 |
voltage-table = <3160000 73>; |
| 133 |
}; |