| 1 |
// SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| 2 |
/* |
| 3 |
* Copyright 2016 Freescale Semiconductor, Inc. |
| 4 |
* Copyright 2017-2018 NXP. |
| 5 |
* |
| 6 |
*/ |
| 7 |
|
| 8 |
#include <dt-bindings/clock/imx6sll-clock.h> |
| 9 |
#include <dt-bindings/gpio/gpio.h> |
| 10 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 11 |
#include "imx6sll-pinfunc.h" |
| 12 |
|
| 13 |
/ { |
| 14 |
#address-cells = <1>; |
| 15 |
#size-cells = <1>; |
| 16 |
|
| 17 |
aliases { |
| 18 |
gpio0 = &gpio1; |
| 19 |
gpio1 = &gpio2; |
| 20 |
gpio2 = &gpio3; |
| 21 |
gpio3 = &gpio4; |
| 22 |
gpio4 = &gpio5; |
| 23 |
gpio5 = &gpio6; |
| 24 |
i2c0 = &i2c1; |
| 25 |
i2c1 = &i2c2; |
| 26 |
i2c2 = &i2c3; |
| 27 |
mmc0 = &usdhc1; |
| 28 |
mmc1 = &usdhc2; |
| 29 |
mmc2 = &usdhc3; |
| 30 |
serial0 = &uart1; |
| 31 |
serial1 = &uart2; |
| 32 |
serial2 = &uart3; |
| 33 |
serial3 = &uart4; |
| 34 |
serial4 = &uart5; |
| 35 |
spi0 = &ecspi1; |
| 36 |
spi1 = &ecspi2; |
| 37 |
spi3 = &ecspi3; |
| 38 |
spi4 = &ecspi4; |
| 39 |
usb0 = &usbotg1; |
| 40 |
usb1 = &usbotg2; |
| 41 |
usbphy0 = &usbphy1; |
| 42 |
usbphy1 = &usbphy2; |
| 43 |
}; |
| 44 |
|
| 45 |
cpus { |
| 46 |
#address-cells = <1>; |
| 47 |
#size-cells = <0>; |
| 48 |
|
| 49 |
cpu0: cpu@0 { |
| 50 |
compatible = "arm,cortex-a9"; |
| 51 |
device_type = "cpu"; |
| 52 |
reg = <0>; |
| 53 |
next-level-cache = <&L2>; |
| 54 |
operating-points = |
| 55 |
/* kHz uV */ |
| 56 |
<996000 1275000>, |
| 57 |
<792000 1175000>, |
| 58 |
<396000 1075000>, |
| 59 |
<198000 975000>; |
| 60 |
fsl,soc-operating-points = |
| 61 |
/* ARM kHz SOC-PU uV */ |
| 62 |
<996000 1175000>, |
| 63 |
<792000 1175000>, |
| 64 |
<396000 1175000>, |
| 65 |
<198000 1175000>; |
| 66 |
clock-latency = <61036>; /* two CLK32 periods */ |
| 67 |
#cooling-cells = <2>; |
| 68 |
clocks = <&clks IMX6SLL_CLK_ARM>, |
| 69 |
<&clks IMX6SLL_CLK_PLL2_PFD2>, |
| 70 |
<&clks IMX6SLL_CLK_STEP>, |
| 71 |
<&clks IMX6SLL_CLK_PLL1_SW>, |
| 72 |
<&clks IMX6SLL_CLK_PLL1_SYS>; |
| 73 |
clock-names = "arm", "pll2_pfd2_396m", "step", |
| 74 |
"pll1_sw", "pll1_sys"; |
| 75 |
nvmem-cells = <&cpu_speed_grade>; |
| 76 |
nvmem-cell-names = "speed_grade"; |
| 77 |
}; |
| 78 |
}; |
| 79 |
|
| 80 |
ckil: clock-ckil { |
| 81 |
compatible = "fixed-clock"; |
| 82 |
#clock-cells = <0>; |
| 83 |
clock-frequency = <32768>; |
| 84 |
clock-output-names = "ckil"; |
| 85 |
}; |
| 86 |
|
| 87 |
osc: clock-osc-24m { |
| 88 |
compatible = "fixed-clock"; |
| 89 |
#clock-cells = <0>; |
| 90 |
clock-frequency = <24000000>; |
| 91 |
clock-output-names = "osc"; |
| 92 |
}; |
| 93 |
|
| 94 |
ipp_di0: clock-ipp-di0 { |
| 95 |
compatible = "fixed-clock"; |
| 96 |
#clock-cells = <0>; |
| 97 |
clock-frequency = <0>; |
| 98 |
clock-output-names = "ipp_di0"; |
| 99 |
}; |
| 100 |
|
| 101 |
ipp_di1: clock-ipp-di1 { |
| 102 |
compatible = "fixed-clock"; |
| 103 |
#clock-cells = <0>; |
| 104 |
clock-frequency = <0>; |
| 105 |
clock-output-names = "ipp_di1"; |
| 106 |
}; |
| 107 |
|
| 108 |
soc { |
| 109 |
#address-cells = <1>; |
| 110 |
#size-cells = <1>; |
| 111 |
compatible = "simple-bus"; |
| 112 |
interrupt-parent = <&gpc>; |
| 113 |
ranges; |
| 114 |
|
| 115 |
ocram: sram@900000 { |
| 116 |
compatible = "mmio-sram"; |
| 117 |
reg = <0x00900000 0x20000>; |
| 118 |
ranges = <0 0x00900000 0x20000>; |
| 119 |
#address-cells = <1>; |
| 120 |
#size-cells = <1>; |
| 121 |
}; |
| 122 |
|
| 123 |
intc: interrupt-controller@a01000 { |
| 124 |
compatible = "arm,cortex-a9-gic"; |
| 125 |
#interrupt-cells = <3>; |
| 126 |
interrupt-controller; |
| 127 |
reg = <0x00a01000 0x1000>, |
| 128 |
<0x00a00100 0x100>; |
| 129 |
interrupt-parent = <&intc>; |
| 130 |
}; |
| 131 |
|
| 132 |
L2: cache-controller@a02000 { |
| 133 |
compatible = "arm,pl310-cache"; |
| 134 |
reg = <0x00a02000 0x1000>; |
| 135 |
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; |
| 136 |
cache-unified; |
| 137 |
cache-level = <2>; |
| 138 |
arm,tag-latency = <4 2 3>; |
| 139 |
arm,data-latency = <4 2 3>; |
| 140 |
}; |
| 141 |
|
| 142 |
aips1: bus@2000000 { |
| 143 |
compatible = "fsl,aips-bus", "simple-bus"; |
| 144 |
#address-cells = <1>; |
| 145 |
#size-cells = <1>; |
| 146 |
reg = <0x02000000 0x100000>; |
| 147 |
ranges; |
| 148 |
|
| 149 |
spba: spba-bus@2000000 { |
| 150 |
compatible = "fsl,spba-bus", "simple-bus"; |
| 151 |
#address-cells = <1>; |
| 152 |
#size-cells = <1>; |
| 153 |
reg = <0x02000000 0x40000>; |
| 154 |
ranges; |
| 155 |
|
| 156 |
spdif: spdif@2004000 { |
| 157 |
compatible = "fsl,imx6sl-spdif", "fsl,imx35-spdif"; |
| 158 |
reg = <0x02004000 0x4000>; |
| 159 |
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; |
| 160 |
dmas = <&sdma 14 18 0>, <&sdma 15 18 0>; |
| 161 |
dma-names = "rx", "tx"; |
| 162 |
clocks = <&clks IMX6SLL_CLK_SPDIF_GCLK>, |
| 163 |
<&clks IMX6SLL_CLK_OSC>, |
| 164 |
<&clks IMX6SLL_CLK_SPDIF>, |
| 165 |
<&clks IMX6SLL_CLK_DUMMY>, |
| 166 |
<&clks IMX6SLL_CLK_DUMMY>, |
| 167 |
<&clks IMX6SLL_CLK_DUMMY>, |
| 168 |
<&clks IMX6SLL_CLK_IPG>, |
| 169 |
<&clks IMX6SLL_CLK_DUMMY>, |
| 170 |
<&clks IMX6SLL_CLK_DUMMY>, |
| 171 |
<&clks IMX6SLL_CLK_SPBA>; |
| 172 |
clock-names = "core", "rxtx0", |
| 173 |
"rxtx1", "rxtx2", |
| 174 |
"rxtx3", "rxtx4", |
| 175 |
"rxtx5", "rxtx6", |
| 176 |
"rxtx7", "spba"; |
| 177 |
status = "disabled"; |
| 178 |
}; |
| 179 |
|
| 180 |
ecspi1: spi@2008000 { |
| 181 |
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; |
| 182 |
reg = <0x02008000 0x4000>; |
| 183 |
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; |
| 184 |
dmas = <&sdma 3 7 1>, <&sdma 4 7 2>; |
| 185 |
dma-names = "rx", "tx"; |
| 186 |
clocks = <&clks IMX6SLL_CLK_ECSPI1>, |
| 187 |
<&clks IMX6SLL_CLK_ECSPI1>; |
| 188 |
clock-names = "ipg", "per"; |
| 189 |
status = "disabled"; |
| 190 |
}; |
| 191 |
|
| 192 |
ecspi2: spi@200c000 { |
| 193 |
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; |
| 194 |
reg = <0x0200c000 0x4000>; |
| 195 |
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| 196 |
dmas = <&sdma 5 7 1>, <&sdma 6 7 2>; |
| 197 |
dma-names = "rx", "tx"; |
| 198 |
clocks = <&clks IMX6SLL_CLK_ECSPI2>, |
| 199 |
<&clks IMX6SLL_CLK_ECSPI2>; |
| 200 |
clock-names = "ipg", "per"; |
| 201 |
status = "disabled"; |
| 202 |
}; |
| 203 |
|
| 204 |
ecspi3: spi@2010000 { |
| 205 |
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; |
| 206 |
reg = <0x02010000 0x4000>; |
| 207 |
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| 208 |
dmas = <&sdma 7 7 1>, <&sdma 8 7 2>; |
| 209 |
dma-names = "rx", "tx"; |
| 210 |
clocks = <&clks IMX6SLL_CLK_ECSPI3>, |
| 211 |
<&clks IMX6SLL_CLK_ECSPI3>; |
| 212 |
clock-names = "ipg", "per"; |
| 213 |
status = "disabled"; |
| 214 |
}; |
| 215 |
|
| 216 |
ecspi4: spi@2014000 { |
| 217 |
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; |
| 218 |
reg = <0x02014000 0x4000>; |
| 219 |
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| 220 |
dmas = <&sdma 9 7 1>, <&sdma 10 7 2>; |
| 221 |
dma-names = "rx", "tx"; |
| 222 |
clocks = <&clks IMX6SLL_CLK_ECSPI4>, |
| 223 |
<&clks IMX6SLL_CLK_ECSPI4>; |
| 224 |
clock-names = "ipg", "per"; |
| 225 |
status = "disabled"; |
| 226 |
}; |
| 227 |
|
| 228 |
uart4: serial@2018000 { |
| 229 |
compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", |
| 230 |
"fsl,imx21-uart"; |
| 231 |
reg = <0x02018000 0x4000>; |
| 232 |
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| 233 |
dmas = <&sdma 31 4 0>, <&sdma 32 4 0>; |
| 234 |
dma-names = "rx", "tx"; |
| 235 |
clocks = <&clks IMX6SLL_CLK_UART4_IPG>, |
| 236 |
<&clks IMX6SLL_CLK_UART4_SERIAL>; |
| 237 |
clock-names = "ipg", "per"; |
| 238 |
status = "disabled"; |
| 239 |
}; |
| 240 |
|
| 241 |
uart1: serial@2020000 { |
| 242 |
compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", |
| 243 |
"fsl,imx21-uart"; |
| 244 |
reg = <0x02020000 0x4000>; |
| 245 |
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| 246 |
dmas = <&sdma 25 4 0>, <&sdma 26 4 0>; |
| 247 |
dma-names = "rx", "tx"; |
| 248 |
clocks = <&clks IMX6SLL_CLK_UART1_IPG>, |
| 249 |
<&clks IMX6SLL_CLK_UART1_SERIAL>; |
| 250 |
clock-names = "ipg", "per"; |
| 251 |
status = "disabled"; |
| 252 |
}; |
| 253 |
|
| 254 |
uart2: serial@2024000 { |
| 255 |
compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", |
| 256 |
"fsl,imx21-uart"; |
| 257 |
reg = <0x02024000 0x4000>; |
| 258 |
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; |
| 259 |
dmas = <&sdma 27 4 0>, <&sdma 28 4 0>; |
| 260 |
dma-names = "rx", "tx"; |
| 261 |
clocks = <&clks IMX6SLL_CLK_UART2_IPG>, |
| 262 |
<&clks IMX6SLL_CLK_UART2_SERIAL>; |
| 263 |
clock-names = "ipg", "per"; |
| 264 |
status = "disabled"; |
| 265 |
}; |
| 266 |
|
| 267 |
ssi1: ssi@2028000 { |
| 268 |
compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; |
| 269 |
reg = <0x02028000 0x4000>; |
| 270 |
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; |
| 271 |
dmas = <&sdma 37 22 0>, <&sdma 38 22 0>; |
| 272 |
dma-names = "rx", "tx"; |
| 273 |
fsl,fifo-depth = <15>; |
| 274 |
clocks = <&clks IMX6SLL_CLK_SSI1_IPG>, |
| 275 |
<&clks IMX6SLL_CLK_SSI1>; |
| 276 |
clock-names = "ipg", "baud"; |
| 277 |
status = "disabled"; |
| 278 |
}; |
| 279 |
|
| 280 |
ssi2: ssi@202c000 { |
| 281 |
compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; |
| 282 |
reg = <0x0202c000 0x4000>; |
| 283 |
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; |
| 284 |
dmas = <&sdma 41 22 0>, <&sdma 42 22 0>; |
| 285 |
dma-names = "rx", "tx"; |
| 286 |
fsl,fifo-depth = <15>; |
| 287 |
clocks = <&clks IMX6SLL_CLK_SSI2_IPG>, |
| 288 |
<&clks IMX6SLL_CLK_SSI2>; |
| 289 |
clock-names = "ipg", "baud"; |
| 290 |
status = "disabled"; |
| 291 |
}; |
| 292 |
|
| 293 |
ssi3: ssi@2030000 { |
| 294 |
compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; |
| 295 |
reg = <0x02030000 0x4000>; |
| 296 |
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; |
| 297 |
dmas = <&sdma 45 22 0>, <&sdma 46 22 0>; |
| 298 |
dma-names = "rx", "tx"; |
| 299 |
fsl,fifo-depth = <15>; |
| 300 |
clocks = <&clks IMX6SLL_CLK_SSI3_IPG>, |
| 301 |
<&clks IMX6SLL_CLK_SSI3>; |
| 302 |
clock-names = "ipg", "baud"; |
| 303 |
status = "disabled"; |
| 304 |
}; |
| 305 |
|
| 306 |
uart3: serial@2034000 { |
| 307 |
compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", |
| 308 |
"fsl,imx21-uart"; |
| 309 |
reg = <0x02034000 0x4000>; |
| 310 |
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; |
| 311 |
dmas = <&sdma 29 4 0>, <&sdma 30 4 0>; |
| 312 |
dma-names = "rx", "tx"; |
| 313 |
clocks = <&clks IMX6SLL_CLK_UART3_IPG>, |
| 314 |
<&clks IMX6SLL_CLK_UART3_SERIAL>; |
| 315 |
clock-names = "ipg", "per"; |
| 316 |
status = "disabled"; |
| 317 |
}; |
| 318 |
}; |
| 319 |
|
| 320 |
pwm1: pwm@2080000 { |
| 321 |
compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; |
| 322 |
reg = <0x02080000 0x4000>; |
| 323 |
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; |
| 324 |
clocks = <&clks IMX6SLL_CLK_PWM1>, |
| 325 |
<&clks IMX6SLL_CLK_PWM1>; |
| 326 |
clock-names = "ipg", "per"; |
| 327 |
#pwm-cells = <3>; |
| 328 |
}; |
| 329 |
|
| 330 |
pwm2: pwm@2084000 { |
| 331 |
compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; |
| 332 |
reg = <0x02084000 0x4000>; |
| 333 |
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| 334 |
clocks = <&clks IMX6SLL_CLK_PWM2>, |
| 335 |
<&clks IMX6SLL_CLK_PWM2>; |
| 336 |
clock-names = "ipg", "per"; |
| 337 |
#pwm-cells = <3>; |
| 338 |
}; |
| 339 |
|
| 340 |
pwm3: pwm@2088000 { |
| 341 |
compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; |
| 342 |
reg = <0x02088000 0x4000>; |
| 343 |
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; |
| 344 |
clocks = <&clks IMX6SLL_CLK_PWM3>, |
| 345 |
<&clks IMX6SLL_CLK_PWM3>; |
| 346 |
clock-names = "ipg", "per"; |
| 347 |
#pwm-cells = <3>; |
| 348 |
}; |
| 349 |
|
| 350 |
pwm4: pwm@208c000 { |
| 351 |
compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; |
| 352 |
reg = <0x0208c000 0x4000>; |
| 353 |
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| 354 |
clocks = <&clks IMX6SLL_CLK_PWM4>, |
| 355 |
<&clks IMX6SLL_CLK_PWM4>; |
| 356 |
clock-names = "ipg", "per"; |
| 357 |
#pwm-cells = <3>; |
| 358 |
}; |
| 359 |
|
| 360 |
gpt1: timer@2098000 { |
| 361 |
compatible = "fsl,imx6sl-gpt", "fsl,imx6dl-gpt"; |
| 362 |
reg = <0x02098000 0x4000>; |
| 363 |
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; |
| 364 |
clocks = <&clks IMX6SLL_CLK_GPT_BUS>, |
| 365 |
<&clks IMX6SLL_CLK_GPT_SERIAL>; |
| 366 |
clock-names = "ipg", "per"; |
| 367 |
}; |
| 368 |
|
| 369 |
gpio1: gpio@209c000 { |
| 370 |
compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; |
| 371 |
reg = <0x0209c000 0x4000>; |
| 372 |
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, |
| 373 |
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; |
| 374 |
clocks = <&clks IMX6SLL_CLK_GPIO1>; |
| 375 |
gpio-controller; |
| 376 |
#gpio-cells = <2>; |
| 377 |
interrupt-controller; |
| 378 |
#interrupt-cells = <2>; |
| 379 |
gpio-ranges = <&iomuxc 0 94 7>, <&iomuxc 7 25 25>; |
| 380 |
}; |
| 381 |
|
| 382 |
gpio2: gpio@20a0000 { |
| 383 |
compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; |
| 384 |
reg = <0x020a0000 0x4000>; |
| 385 |
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, |
| 386 |
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; |
| 387 |
clocks = <&clks IMX6SLL_CLK_GPIO2>; |
| 388 |
gpio-controller; |
| 389 |
#gpio-cells = <2>; |
| 390 |
interrupt-controller; |
| 391 |
#interrupt-cells = <2>; |
| 392 |
gpio-ranges = <&iomuxc 0 50 32>; |
| 393 |
}; |
| 394 |
|
| 395 |
gpio3: gpio@20a4000 { |
| 396 |
compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; |
| 397 |
reg = <0x020a4000 0x4000>; |
| 398 |
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, |
| 399 |
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; |
| 400 |
clocks = <&clks IMX6SLL_CLK_GPIO3>; |
| 401 |
gpio-controller; |
| 402 |
#gpio-cells = <2>; |
| 403 |
interrupt-controller; |
| 404 |
#interrupt-cells = <2>; |
| 405 |
gpio-ranges = <&iomuxc 0 82 12>, <&iomuxc 12 103 4>, |
| 406 |
<&iomuxc 16 101 2>, <&iomuxc 18 5 1>, |
| 407 |
<&iomuxc 21 6 11>; |
| 408 |
}; |
| 409 |
|
| 410 |
gpio4: gpio@20a8000 { |
| 411 |
compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; |
| 412 |
reg = <0x020a8000 0x4000>; |
| 413 |
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, |
| 414 |
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; |
| 415 |
clocks = <&clks IMX6SLL_CLK_GPIO4>; |
| 416 |
gpio-controller; |
| 417 |
#gpio-cells = <2>; |
| 418 |
interrupt-controller; |
| 419 |
#interrupt-cells = <2>; |
| 420 |
gpio-ranges = <&iomuxc 0 17 8>, <&iomuxc 8 107 8>, |
| 421 |
<&iomuxc 16 151 1>, <&iomuxc 17 149 1>, |
| 422 |
<&iomuxc 18 146 1>, <&iomuxc 19 144 1>, |
| 423 |
<&iomuxc 20 142 1>, <&iomuxc 21 143 1>, |
| 424 |
<&iomuxc 22 150 1>, <&iomuxc 23 148 1>, |
| 425 |
<&iomuxc 24 147 1>, <&iomuxc 25 145 1>, |
| 426 |
<&iomuxc 26 152 1>, <&iomuxc 27 125 1>, |
| 427 |
<&iomuxc 28 131 1>, <&iomuxc 29 134 1>, |
| 428 |
<&iomuxc 30 129 1>, <&iomuxc 31 133 1>; |
| 429 |
}; |
| 430 |
|
| 431 |
gpio5: gpio@20ac000 { |
| 432 |
compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; |
| 433 |
reg = <0x020ac000 0x4000>; |
| 434 |
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, |
| 435 |
<GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; |
| 436 |
clocks = <&clks IMX6SLL_CLK_GPIO5>; |
| 437 |
gpio-controller; |
| 438 |
#gpio-cells = <2>; |
| 439 |
interrupt-controller; |
| 440 |
#interrupt-cells = <2>; |
| 441 |
gpio-ranges = <&iomuxc 0 135 1>, <&iomuxc 1 128 1>, |
| 442 |
<&iomuxc 2 132 1>, <&iomuxc 3 130 1>, |
| 443 |
<&iomuxc 4 127 1>, <&iomuxc 5 126 1>, |
| 444 |
<&iomuxc 6 120 1>, <&iomuxc 7 123 1>, |
| 445 |
<&iomuxc 8 118 1>, <&iomuxc 9 122 1>, |
| 446 |
<&iomuxc 10 124 1>, <&iomuxc 11 117 1>, |
| 447 |
<&iomuxc 12 121 1>, <&iomuxc 13 119 1>, |
| 448 |
<&iomuxc 14 116 1>, <&iomuxc 15 115 1>, |
| 449 |
<&iomuxc 16 140 2>, <&iomuxc 18 136 1>, |
| 450 |
<&iomuxc 19 138 1>, <&iomuxc 20 139 1>, |
| 451 |
<&iomuxc 21 137 1>; |
| 452 |
}; |
| 453 |
|
| 454 |
gpio6: gpio@20b0000 { |
| 455 |
compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; |
| 456 |
reg = <0x020b0000 0x4000>; |
| 457 |
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, |
| 458 |
<GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; |
| 459 |
clocks = <&clks IMX6SLL_CLK_GPIO6>; |
| 460 |
gpio-controller; |
| 461 |
#gpio-cells = <2>; |
| 462 |
interrupt-controller; |
| 463 |
#interrupt-cells = <2>; |
| 464 |
}; |
| 465 |
|
| 466 |
kpp: keypad@20b8000 { |
| 467 |
compatible = "fsl,imx6sll-kpp", "fsl,imx21-kpp"; |
| 468 |
reg = <0x020b8000 0x4000>; |
| 469 |
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; |
| 470 |
clocks = <&clks IMX6SLL_CLK_KPP>; |
| 471 |
status = "disabled"; |
| 472 |
}; |
| 473 |
|
| 474 |
wdog1: watchdog@20bc000 { |
| 475 |
compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt"; |
| 476 |
reg = <0x020bc000 0x4000>; |
| 477 |
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; |
| 478 |
clocks = <&clks IMX6SLL_CLK_WDOG1>; |
| 479 |
}; |
| 480 |
|
| 481 |
wdog2: watchdog@20c0000 { |
| 482 |
compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt"; |
| 483 |
reg = <0x020c0000 0x4000>; |
| 484 |
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; |
| 485 |
clocks = <&clks IMX6SLL_CLK_WDOG2>; |
| 486 |
status = "disabled"; |
| 487 |
}; |
| 488 |
|
| 489 |
clks: clock-controller@20c4000 { |
| 490 |
compatible = "fsl,imx6sll-ccm"; |
| 491 |
reg = <0x020c4000 0x4000>; |
| 492 |
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, |
| 493 |
<GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; |
| 494 |
#clock-cells = <1>; |
| 495 |
clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; |
| 496 |
clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; |
| 497 |
|
| 498 |
assigned-clocks = <&clks IMX6SLL_CLK_PERCLK_SEL>; |
| 499 |
assigned-clock-parents = <&clks IMX6SLL_CLK_OSC>; |
| 500 |
}; |
| 501 |
|
| 502 |
anatop: anatop@20c8000 { |
| 503 |
compatible = "fsl,imx6sll-anatop", |
| 504 |
"fsl,imx6q-anatop", |
| 505 |
"syscon", "simple-mfd"; |
| 506 |
reg = <0x020c8000 0x4000>; |
| 507 |
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, |
| 508 |
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, |
| 509 |
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; |
| 510 |
|
| 511 |
reg_3p0: regulator-3p0 { |
| 512 |
compatible = "fsl,anatop-regulator"; |
| 513 |
regulator-name = "vdd3p0"; |
| 514 |
regulator-min-microvolt = <2625000>; |
| 515 |
regulator-max-microvolt = <3400000>; |
| 516 |
anatop-reg-offset = <0x120>; |
| 517 |
anatop-vol-bit-shift = <8>; |
| 518 |
anatop-vol-bit-width = <5>; |
| 519 |
anatop-min-bit-val = <0>; |
| 520 |
anatop-min-voltage = <2625000>; |
| 521 |
anatop-max-voltage = <3400000>; |
| 522 |
anatop-enable-bit = <0>; |
| 523 |
}; |
| 524 |
|
| 525 |
tempmon: tempmon { |
| 526 |
compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon"; |
| 527 |
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; |
| 528 |
interrupt-parent = <&gpc>; |
| 529 |
fsl,tempmon = <&anatop>; |
| 530 |
nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; |
| 531 |
nvmem-cell-names = "calib", "temp_grade"; |
| 532 |
clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>; |
| 533 |
#thermal-sensor-cells = <0>; |
| 534 |
}; |
| 535 |
}; |
| 536 |
|
| 537 |
usbphy1: usb-phy@20c9000 { |
| 538 |
compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy", |
| 539 |
"fsl,imx23-usbphy"; |
| 540 |
reg = <0x020c9000 0x1000>; |
| 541 |
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; |
| 542 |
clocks = <&clks IMX6SLL_CLK_USBPHY1>; |
| 543 |
phy-3p0-supply = <®_3p0>; |
| 544 |
fsl,anatop = <&anatop>; |
| 545 |
}; |
| 546 |
|
| 547 |
usbphy2: usb-phy@20ca000 { |
| 548 |
compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy", |
| 549 |
"fsl,imx23-usbphy"; |
| 550 |
reg = <0x020ca000 0x1000>; |
| 551 |
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; |
| 552 |
clocks = <&clks IMX6SLL_CLK_USBPHY2>; |
| 553 |
phy-3p0-supply = <®_3p0>; |
| 554 |
fsl,anatop = <&anatop>; |
| 555 |
}; |
| 556 |
|
| 557 |
snvs: snvs@20cc000 { |
| 558 |
compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; |
| 559 |
reg = <0x020cc000 0x4000>; |
| 560 |
|
| 561 |
snvs_rtc: snvs-rtc-lp { |
| 562 |
compatible = "fsl,sec-v4.0-mon-rtc-lp"; |
| 563 |
regmap = <&snvs>; |
| 564 |
offset = <0x34>; |
| 565 |
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, |
| 566 |
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; |
| 567 |
}; |
| 568 |
|
| 569 |
snvs_poweroff: snvs-poweroff { |
| 570 |
compatible = "syscon-poweroff"; |
| 571 |
regmap = <&snvs>; |
| 572 |
offset = <0x38>; |
| 573 |
mask = <0x61>; |
| 574 |
status = "disabled"; |
| 575 |
}; |
| 576 |
|
| 577 |
snvs_pwrkey: snvs-powerkey { |
| 578 |
compatible = "fsl,sec-v4.0-pwrkey"; |
| 579 |
regmap = <&snvs>; |
| 580 |
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; |
| 581 |
linux,keycode = <KEY_POWER>; |
| 582 |
wakeup-source; |
| 583 |
status = "disabled"; |
| 584 |
}; |
| 585 |
}; |
| 586 |
|
| 587 |
src: reset-controller@20d8000 { |
| 588 |
compatible = "fsl,imx6sll-src", "fsl,imx51-src"; |
| 589 |
reg = <0x020d8000 0x4000>; |
| 590 |
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, |
| 591 |
<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| 592 |
#reset-cells = <1>; |
| 593 |
}; |
| 594 |
|
| 595 |
gpc: interrupt-controller@20dc000 { |
| 596 |
compatible = "fsl,imx6sll-gpc", "fsl,imx6q-gpc"; |
| 597 |
reg = <0x020dc000 0x4000>; |
| 598 |
interrupt-controller; |
| 599 |
#interrupt-cells = <3>; |
| 600 |
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; |
| 601 |
interrupt-parent = <&intc>; |
| 602 |
clocks = <&clks IMX6SLL_CLK_IPG>; |
| 603 |
clock-names = "ipg"; |
| 604 |
|
| 605 |
pgc { |
| 606 |
#address-cells = <1>; |
| 607 |
#size-cells = <0>; |
| 608 |
|
| 609 |
power-domain@0 { |
| 610 |
reg = <0>; |
| 611 |
#power-domain-cells = <0>; |
| 612 |
}; |
| 613 |
}; |
| 614 |
}; |
| 615 |
|
| 616 |
iomuxc: pinctrl@20e0000 { |
| 617 |
compatible = "fsl,imx6sll-iomuxc"; |
| 618 |
reg = <0x020e0000 0x4000>; |
| 619 |
}; |
| 620 |
|
| 621 |
gpr: iomuxc-gpr@20e4000 { |
| 622 |
compatible = "fsl,imx6sll-iomuxc-gpr", |
| 623 |
"fsl,imx6q-iomuxc-gpr", "syscon"; |
| 624 |
reg = <0x020e4000 0x4000>; |
| 625 |
}; |
| 626 |
|
| 627 |
csi: csi@20e8000 { |
| 628 |
compatible = "fsl,imx6sll-csi", "fsl,imx6s-csi"; |
| 629 |
reg = <0x020e8000 0x4000>; |
| 630 |
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| 631 |
clocks = <&clks IMX6SLL_CLK_DUMMY>, |
| 632 |
<&clks IMX6SLL_CLK_CSI>, |
| 633 |
<&clks IMX6SLL_CLK_DUMMY>; |
| 634 |
clock-names = "disp-axi", "csi_mclk", "disp_dcic"; |
| 635 |
status = "disabled"; |
| 636 |
}; |
| 637 |
|
| 638 |
sdma: dma-controller@20ec000 { |
| 639 |
compatible = "fsl,imx6sll-sdma", "fsl,imx6ul-sdma"; |
| 640 |
reg = <0x020ec000 0x4000>; |
| 641 |
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| 642 |
clocks = <&clks IMX6SLL_CLK_IPG>, |
| 643 |
<&clks IMX6SLL_CLK_SDMA>; |
| 644 |
clock-names = "ipg", "ahb"; |
| 645 |
#dma-cells = <3>; |
| 646 |
iram = <&ocram>; |
| 647 |
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; |
| 648 |
}; |
| 649 |
|
| 650 |
pxp: pxp@20f0000 { |
| 651 |
compatible = "fsl,imx6sll-pxp", "fsl,imx6ull-pxp"; |
| 652 |
reg = <0x20f0000 0x4000>; |
| 653 |
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, |
| 654 |
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; |
| 655 |
clocks = <&clks IMX6SLL_CLK_PXP>; |
| 656 |
clock-names = "axi"; |
| 657 |
}; |
| 658 |
|
| 659 |
lcdif: lcd-controller@20f8000 { |
| 660 |
compatible = "fsl,imx6sll-lcdif", "fsl,imx6sx-lcdif"; |
| 661 |
reg = <0x020f8000 0x4000>; |
| 662 |
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; |
| 663 |
clocks = <&clks IMX6SLL_CLK_LCDIF_PIX>, |
| 664 |
<&clks IMX6SLL_CLK_LCDIF_APB>, |
| 665 |
<&clks IMX6SLL_CLK_DUMMY>; |
| 666 |
clock-names = "pix", "axi", "disp_axi"; |
| 667 |
status = "disabled"; |
| 668 |
}; |
| 669 |
|
| 670 |
dcp: crypto@20fc000 { |
| 671 |
compatible = "fsl,imx28-dcp"; |
| 672 |
reg = <0x020fc000 0x4000>; |
| 673 |
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, |
| 674 |
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, |
| 675 |
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; |
| 676 |
clocks = <&clks IMX6SLL_CLK_DCP>; |
| 677 |
clock-names = "dcp"; |
| 678 |
}; |
| 679 |
}; |
| 680 |
|
| 681 |
aips2: bus@2100000 { |
| 682 |
compatible = "fsl,aips-bus", "simple-bus"; |
| 683 |
#address-cells = <1>; |
| 684 |
#size-cells = <1>; |
| 685 |
reg = <0x02100000 0x100000>; |
| 686 |
ranges; |
| 687 |
|
| 688 |
usbotg1: usb@2184000 { |
| 689 |
compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb", |
| 690 |
"fsl,imx27-usb"; |
| 691 |
reg = <0x02184000 0x200>; |
| 692 |
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; |
| 693 |
clocks = <&clks IMX6SLL_CLK_USBOH3>; |
| 694 |
fsl,usbphy = <&usbphy1>; |
| 695 |
fsl,usbmisc = <&usbmisc 0>; |
| 696 |
ahb-burst-config = <0x0>; |
| 697 |
tx-burst-size-dword = <0x10>; |
| 698 |
rx-burst-size-dword = <0x10>; |
| 699 |
status = "disabled"; |
| 700 |
}; |
| 701 |
|
| 702 |
usbotg2: usb@2184200 { |
| 703 |
compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb", |
| 704 |
"fsl,imx27-usb"; |
| 705 |
reg = <0x02184200 0x200>; |
| 706 |
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| 707 |
clocks = <&clks IMX6SLL_CLK_USBOH3>; |
| 708 |
fsl,usbphy = <&usbphy2>; |
| 709 |
fsl,usbmisc = <&usbmisc 1>; |
| 710 |
ahb-burst-config = <0x0>; |
| 711 |
tx-burst-size-dword = <0x10>; |
| 712 |
rx-burst-size-dword = <0x10>; |
| 713 |
status = "disabled"; |
| 714 |
}; |
| 715 |
|
| 716 |
usbmisc: usbmisc@2184800 { |
| 717 |
#index-cells = <1>; |
| 718 |
compatible = "fsl,imx6sll-usbmisc", "fsl,imx6ul-usbmisc", |
| 719 |
"fsl,imx6q-usbmisc"; |
| 720 |
reg = <0x02184800 0x200>; |
| 721 |
}; |
| 722 |
|
| 723 |
usdhc1: mmc@2190000 { |
| 724 |
compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc"; |
| 725 |
reg = <0x02190000 0x4000>; |
| 726 |
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; |
| 727 |
clocks = <&clks IMX6SLL_CLK_USDHC1>, |
| 728 |
<&clks IMX6SLL_CLK_USDHC1>, |
| 729 |
<&clks IMX6SLL_CLK_USDHC1>; |
| 730 |
clock-names = "ipg", "ahb", "per"; |
| 731 |
bus-width = <4>; |
| 732 |
fsl,tuning-step = <2>; |
| 733 |
fsl,tuning-start-tap = <20>; |
| 734 |
status = "disabled"; |
| 735 |
}; |
| 736 |
|
| 737 |
usdhc2: mmc@2194000 { |
| 738 |
compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc"; |
| 739 |
reg = <0x02194000 0x4000>; |
| 740 |
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; |
| 741 |
clocks = <&clks IMX6SLL_CLK_USDHC2>, |
| 742 |
<&clks IMX6SLL_CLK_USDHC2>, |
| 743 |
<&clks IMX6SLL_CLK_USDHC2>; |
| 744 |
clock-names = "ipg", "ahb", "per"; |
| 745 |
bus-width = <4>; |
| 746 |
fsl,tuning-step = <2>; |
| 747 |
fsl,tuning-start-tap = <20>; |
| 748 |
status = "disabled"; |
| 749 |
}; |
| 750 |
|
| 751 |
usdhc3: mmc@2198000 { |
| 752 |
compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc"; |
| 753 |
reg = <0x02198000 0x4000>; |
| 754 |
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; |
| 755 |
clocks = <&clks IMX6SLL_CLK_USDHC3>, |
| 756 |
<&clks IMX6SLL_CLK_USDHC3>, |
| 757 |
<&clks IMX6SLL_CLK_USDHC3>; |
| 758 |
clock-names = "ipg", "ahb", "per"; |
| 759 |
bus-width = <4>; |
| 760 |
fsl,tuning-step = <2>; |
| 761 |
fsl,tuning-start-tap = <20>; |
| 762 |
status = "disabled"; |
| 763 |
}; |
| 764 |
|
| 765 |
i2c1: i2c@21a0000 { |
| 766 |
#address-cells = <1>; |
| 767 |
#size-cells = <0>; |
| 768 |
compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c"; |
| 769 |
reg = <0x021a0000 0x4000>; |
| 770 |
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
| 771 |
clocks = <&clks IMX6SLL_CLK_I2C1>; |
| 772 |
status = "disabled"; |
| 773 |
}; |
| 774 |
|
| 775 |
i2c2: i2c@21a4000 { |
| 776 |
#address-cells = <1>; |
| 777 |
#size-cells = <0>; |
| 778 |
compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c"; |
| 779 |
reg = <0x021a4000 0x4000>; |
| 780 |
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| 781 |
clocks = <&clks IMX6SLL_CLK_I2C2>; |
| 782 |
status = "disabled"; |
| 783 |
}; |
| 784 |
|
| 785 |
i2c3: i2c@21a8000 { |
| 786 |
#address-cells = <1>; |
| 787 |
#size-cells = <0>; |
| 788 |
compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c"; |
| 789 |
reg = <0x021a8000 0x4000>; |
| 790 |
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; |
| 791 |
clocks = <&clks IMX6SLL_CLK_I2C3>; |
| 792 |
status = "disabled"; |
| 793 |
}; |
| 794 |
|
| 795 |
mmdc: memory-controller@21b0000 { |
| 796 |
compatible = "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc"; |
| 797 |
reg = <0x021b0000 0x4000>; |
| 798 |
clocks = <&clks IMX6SLL_CLK_MMDC_P0_IPG>; |
| 799 |
}; |
| 800 |
|
| 801 |
rngb: rng@21b4000 { |
| 802 |
compatible = "fsl,imx6sll-rngb", "fsl,imx25-rngb"; |
| 803 |
reg = <0x021b4000 0x4000>; |
| 804 |
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; |
| 805 |
clocks = <&clks IMX6SLL_CLK_DUMMY>; |
| 806 |
}; |
| 807 |
|
| 808 |
ocotp: efuse@21bc000 { |
| 809 |
#address-cells = <1>; |
| 810 |
#size-cells = <1>; |
| 811 |
compatible = "fsl,imx6sll-ocotp", "syscon"; |
| 812 |
reg = <0x021bc000 0x4000>; |
| 813 |
clocks = <&clks IMX6SLL_CLK_OCOTP>; |
| 814 |
|
| 815 |
cpu_speed_grade: speed-grade@10 { |
| 816 |
reg = <0x10 4>; |
| 817 |
}; |
| 818 |
|
| 819 |
tempmon_calib: calib@38 { |
| 820 |
reg = <0x38 4>; |
| 821 |
}; |
| 822 |
|
| 823 |
tempmon_temp_grade: temp-grade@20 { |
| 824 |
reg = <0x20 4>; |
| 825 |
}; |
| 826 |
}; |
| 827 |
|
| 828 |
audmux: audmux@21d8000 { |
| 829 |
compatible = "fsl,imx6sll-audmux", "fsl,imx31-audmux"; |
| 830 |
reg = <0x021d8000 0x4000>; |
| 831 |
status = "disabled"; |
| 832 |
}; |
| 833 |
|
| 834 |
uart5: serial@21f4000 { |
| 835 |
compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", |
| 836 |
"fsl,imx21-uart"; |
| 837 |
reg = <0x021f4000 0x4000>; |
| 838 |
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; |
| 839 |
dmas = <&sdma 33 4 0>, <&sdma 34 4 0>; |
| 840 |
dma-names = "rx", "tx"; |
| 841 |
clocks = <&clks IMX6SLL_CLK_UART5_IPG>, |
| 842 |
<&clks IMX6SLL_CLK_UART5_SERIAL>; |
| 843 |
clock-names = "ipg", "per"; |
| 844 |
status = "disabled"; |
| 845 |
}; |
| 846 |
}; |
| 847 |
}; |
| 848 |
}; |