| 1 |
// SPDX-License-Identifier: GPL-2.0+ |
| 2 |
// |
| 3 |
// Copyright 2012 Sascha Hauer, Pengutronix |
| 4 |
|
| 5 |
#include "imx27-pinfunc.h" |
| 6 |
|
| 7 |
#include <dt-bindings/clock/imx27-clock.h> |
| 8 |
#include <dt-bindings/gpio/gpio.h> |
| 9 |
#include <dt-bindings/input/input.h> |
| 10 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 11 |
|
| 12 |
/ { |
| 13 |
#address-cells = <1>; |
| 14 |
#size-cells = <1>; |
| 15 |
/* |
| 16 |
* The decompressor and also some bootloaders rely on a |
| 17 |
* pre-existing /chosen node to be available to insert the |
| 18 |
* command line and merge other ATAGS info. |
| 19 |
*/ |
| 20 |
chosen {}; |
| 21 |
|
| 22 |
aliases { |
| 23 |
ethernet0 = &fec; |
| 24 |
gpio0 = &gpio1; |
| 25 |
gpio1 = &gpio2; |
| 26 |
gpio2 = &gpio3; |
| 27 |
gpio3 = &gpio4; |
| 28 |
gpio4 = &gpio5; |
| 29 |
gpio5 = &gpio6; |
| 30 |
i2c0 = &i2c1; |
| 31 |
i2c1 = &i2c2; |
| 32 |
serial0 = &uart1; |
| 33 |
serial1 = &uart2; |
| 34 |
serial2 = &uart3; |
| 35 |
serial3 = &uart4; |
| 36 |
serial4 = &uart5; |
| 37 |
serial5 = &uart6; |
| 38 |
spi0 = &cspi1; |
| 39 |
spi1 = &cspi2; |
| 40 |
spi2 = &cspi3; |
| 41 |
}; |
| 42 |
|
| 43 |
aitc: aitc-interrupt-controller@10040000 { |
| 44 |
compatible = "fsl,imx27-aitc", "fsl,avic"; |
| 45 |
interrupt-controller; |
| 46 |
#interrupt-cells = <1>; |
| 47 |
reg = <0x10040000 0x1000>; |
| 48 |
}; |
| 49 |
|
| 50 |
clocks { |
| 51 |
clk_osc26m: osc26m { |
| 52 |
compatible = "fsl,imx-osc26m", "fixed-clock"; |
| 53 |
#clock-cells = <0>; |
| 54 |
clock-frequency = <26000000>; |
| 55 |
}; |
| 56 |
}; |
| 57 |
|
| 58 |
cpus { |
| 59 |
#size-cells = <0>; |
| 60 |
#address-cells = <1>; |
| 61 |
|
| 62 |
cpu: cpu@0 { |
| 63 |
device_type = "cpu"; |
| 64 |
reg = <0>; |
| 65 |
compatible = "arm,arm926ej-s"; |
| 66 |
operating-points = < |
| 67 |
/* kHz uV */ |
| 68 |
266000 1300000 |
| 69 |
399000 1450000 |
| 70 |
>; |
| 71 |
clock-latency = <62500>; |
| 72 |
clocks = <&clks IMX27_CLK_CPU_DIV>; |
| 73 |
voltage-tolerance = <5>; |
| 74 |
}; |
| 75 |
}; |
| 76 |
|
| 77 |
soc: soc { |
| 78 |
#address-cells = <1>; |
| 79 |
#size-cells = <1>; |
| 80 |
compatible = "simple-bus"; |
| 81 |
interrupt-parent = <&aitc>; |
| 82 |
ranges; |
| 83 |
|
| 84 |
aipi1: bus@10000000 { /* AIPI1 */ |
| 85 |
compatible = "fsl,aipi-bus", "simple-bus"; |
| 86 |
#address-cells = <1>; |
| 87 |
#size-cells = <1>; |
| 88 |
reg = <0x10000000 0x20000>; |
| 89 |
ranges; |
| 90 |
|
| 91 |
dma: dma-controller@10001000 { |
| 92 |
compatible = "fsl,imx27-dma"; |
| 93 |
reg = <0x10001000 0x1000>; |
| 94 |
interrupts = <32>; |
| 95 |
clocks = <&clks IMX27_CLK_DMA_IPG_GATE>, |
| 96 |
<&clks IMX27_CLK_DMA_AHB_GATE>; |
| 97 |
clock-names = "ipg", "ahb"; |
| 98 |
#dma-cells = <1>; |
| 99 |
dma-channels = <16>; |
| 100 |
}; |
| 101 |
|
| 102 |
wdog: watchdog@10002000 { |
| 103 |
compatible = "fsl,imx27-wdt", "fsl,imx21-wdt"; |
| 104 |
reg = <0x10002000 0x1000>; |
| 105 |
interrupts = <27>; |
| 106 |
clocks = <&clks IMX27_CLK_WDOG_IPG_GATE>; |
| 107 |
}; |
| 108 |
|
| 109 |
gpt1: timer@10003000 { |
| 110 |
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; |
| 111 |
reg = <0x10003000 0x1000>; |
| 112 |
interrupts = <26>; |
| 113 |
clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>, |
| 114 |
<&clks IMX27_CLK_PER1_GATE>; |
| 115 |
clock-names = "ipg", "per"; |
| 116 |
}; |
| 117 |
|
| 118 |
gpt2: timer@10004000 { |
| 119 |
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; |
| 120 |
reg = <0x10004000 0x1000>; |
| 121 |
interrupts = <25>; |
| 122 |
clocks = <&clks IMX27_CLK_GPT2_IPG_GATE>, |
| 123 |
<&clks IMX27_CLK_PER1_GATE>; |
| 124 |
clock-names = "ipg", "per"; |
| 125 |
}; |
| 126 |
|
| 127 |
gpt3: timer@10005000 { |
| 128 |
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; |
| 129 |
reg = <0x10005000 0x1000>; |
| 130 |
interrupts = <24>; |
| 131 |
clocks = <&clks IMX27_CLK_GPT3_IPG_GATE>, |
| 132 |
<&clks IMX27_CLK_PER1_GATE>; |
| 133 |
clock-names = "ipg", "per"; |
| 134 |
}; |
| 135 |
|
| 136 |
pwm: pwm@10006000 { |
| 137 |
#pwm-cells = <3>; |
| 138 |
compatible = "fsl,imx27-pwm"; |
| 139 |
reg = <0x10006000 0x1000>; |
| 140 |
interrupts = <23>; |
| 141 |
clocks = <&clks IMX27_CLK_PWM_IPG_GATE>, |
| 142 |
<&clks IMX27_CLK_PER1_GATE>; |
| 143 |
clock-names = "ipg", "per"; |
| 144 |
}; |
| 145 |
|
| 146 |
rtc: rtc@10007000 { |
| 147 |
compatible = "fsl,imx21-rtc"; |
| 148 |
reg = <0x10007000 0x1000>; |
| 149 |
interrupts = <22>; |
| 150 |
clocks = <&clks IMX27_CLK_CKIL>, |
| 151 |
<&clks IMX27_CLK_RTC_IPG_GATE>; |
| 152 |
clock-names = "ref", "ipg"; |
| 153 |
}; |
| 154 |
|
| 155 |
kpp: kpp@10008000 { |
| 156 |
compatible = "fsl,imx27-kpp", "fsl,imx21-kpp"; |
| 157 |
reg = <0x10008000 0x1000>; |
| 158 |
interrupts = <21>; |
| 159 |
clocks = <&clks IMX27_CLK_KPP_IPG_GATE>; |
| 160 |
status = "disabled"; |
| 161 |
}; |
| 162 |
|
| 163 |
owire: owire@10009000 { |
| 164 |
compatible = "fsl,imx27-owire", "fsl,imx21-owire"; |
| 165 |
reg = <0x10009000 0x1000>; |
| 166 |
clocks = <&clks IMX27_CLK_OWIRE_IPG_GATE>; |
| 167 |
status = "disabled"; |
| 168 |
}; |
| 169 |
|
| 170 |
uart1: serial@1000a000 { |
| 171 |
compatible = "fsl,imx27-uart", "fsl,imx21-uart"; |
| 172 |
reg = <0x1000a000 0x1000>; |
| 173 |
interrupts = <20>; |
| 174 |
clocks = <&clks IMX27_CLK_UART1_IPG_GATE>, |
| 175 |
<&clks IMX27_CLK_PER1_GATE>; |
| 176 |
clock-names = "ipg", "per"; |
| 177 |
status = "disabled"; |
| 178 |
}; |
| 179 |
|
| 180 |
uart2: serial@1000b000 { |
| 181 |
compatible = "fsl,imx27-uart", "fsl,imx21-uart"; |
| 182 |
reg = <0x1000b000 0x1000>; |
| 183 |
interrupts = <19>; |
| 184 |
clocks = <&clks IMX27_CLK_UART2_IPG_GATE>, |
| 185 |
<&clks IMX27_CLK_PER1_GATE>; |
| 186 |
clock-names = "ipg", "per"; |
| 187 |
status = "disabled"; |
| 188 |
}; |
| 189 |
|
| 190 |
uart3: serial@1000c000 { |
| 191 |
compatible = "fsl,imx27-uart", "fsl,imx21-uart"; |
| 192 |
reg = <0x1000c000 0x1000>; |
| 193 |
interrupts = <18>; |
| 194 |
clocks = <&clks IMX27_CLK_UART3_IPG_GATE>, |
| 195 |
<&clks IMX27_CLK_PER1_GATE>; |
| 196 |
clock-names = "ipg", "per"; |
| 197 |
status = "disabled"; |
| 198 |
}; |
| 199 |
|
| 200 |
uart4: serial@1000d000 { |
| 201 |
compatible = "fsl,imx27-uart", "fsl,imx21-uart"; |
| 202 |
reg = <0x1000d000 0x1000>; |
| 203 |
interrupts = <17>; |
| 204 |
clocks = <&clks IMX27_CLK_UART4_IPG_GATE>, |
| 205 |
<&clks IMX27_CLK_PER1_GATE>; |
| 206 |
clock-names = "ipg", "per"; |
| 207 |
status = "disabled"; |
| 208 |
}; |
| 209 |
|
| 210 |
cspi1: spi@1000e000 { |
| 211 |
#address-cells = <1>; |
| 212 |
#size-cells = <0>; |
| 213 |
compatible = "fsl,imx27-cspi"; |
| 214 |
reg = <0x1000e000 0x1000>; |
| 215 |
interrupts = <16>; |
| 216 |
clocks = <&clks IMX27_CLK_CSPI1_IPG_GATE>, |
| 217 |
<&clks IMX27_CLK_PER2_GATE>; |
| 218 |
clock-names = "ipg", "per"; |
| 219 |
status = "disabled"; |
| 220 |
}; |
| 221 |
|
| 222 |
cspi2: spi@1000f000 { |
| 223 |
#address-cells = <1>; |
| 224 |
#size-cells = <0>; |
| 225 |
compatible = "fsl,imx27-cspi"; |
| 226 |
reg = <0x1000f000 0x1000>; |
| 227 |
interrupts = <15>; |
| 228 |
clocks = <&clks IMX27_CLK_CSPI2_IPG_GATE>, |
| 229 |
<&clks IMX27_CLK_PER2_GATE>; |
| 230 |
clock-names = "ipg", "per"; |
| 231 |
status = "disabled"; |
| 232 |
}; |
| 233 |
|
| 234 |
ssi1: ssi@10010000 { |
| 235 |
#sound-dai-cells = <0>; |
| 236 |
compatible = "fsl,imx27-ssi", "fsl,imx21-ssi"; |
| 237 |
reg = <0x10010000 0x1000>; |
| 238 |
interrupts = <14>; |
| 239 |
clocks = <&clks IMX27_CLK_SSI1_IPG_GATE>; |
| 240 |
dmas = <&dma 12>, <&dma 13>, <&dma 14>, <&dma 15>; |
| 241 |
dma-names = "rx0", "tx0", "rx1", "tx1"; |
| 242 |
fsl,fifo-depth = <8>; |
| 243 |
status = "disabled"; |
| 244 |
}; |
| 245 |
|
| 246 |
ssi2: ssi@10011000 { |
| 247 |
#sound-dai-cells = <0>; |
| 248 |
compatible = "fsl,imx27-ssi", "fsl,imx21-ssi"; |
| 249 |
reg = <0x10011000 0x1000>; |
| 250 |
interrupts = <13>; |
| 251 |
clocks = <&clks IMX27_CLK_SSI2_IPG_GATE>; |
| 252 |
dmas = <&dma 8>, <&dma 9>, <&dma 10>, <&dma 11>; |
| 253 |
dma-names = "rx0", "tx0", "rx1", "tx1"; |
| 254 |
fsl,fifo-depth = <8>; |
| 255 |
status = "disabled"; |
| 256 |
}; |
| 257 |
|
| 258 |
i2c1: i2c@10012000 { |
| 259 |
#address-cells = <1>; |
| 260 |
#size-cells = <0>; |
| 261 |
compatible = "fsl,imx27-i2c", "fsl,imx21-i2c"; |
| 262 |
reg = <0x10012000 0x1000>; |
| 263 |
interrupts = <12>; |
| 264 |
clocks = <&clks IMX27_CLK_I2C1_IPG_GATE>; |
| 265 |
status = "disabled"; |
| 266 |
}; |
| 267 |
|
| 268 |
sdhci1: mmc@10013000 { |
| 269 |
compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; |
| 270 |
reg = <0x10013000 0x1000>; |
| 271 |
interrupts = <11>; |
| 272 |
clocks = <&clks IMX27_CLK_SDHC1_IPG_GATE>, |
| 273 |
<&clks IMX27_CLK_PER2_GATE>; |
| 274 |
clock-names = "ipg", "per"; |
| 275 |
dmas = <&dma 7>; |
| 276 |
dma-names = "rx-tx"; |
| 277 |
status = "disabled"; |
| 278 |
}; |
| 279 |
|
| 280 |
sdhci2: mmc@10014000 { |
| 281 |
compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; |
| 282 |
reg = <0x10014000 0x1000>; |
| 283 |
interrupts = <10>; |
| 284 |
clocks = <&clks IMX27_CLK_SDHC2_IPG_GATE>, |
| 285 |
<&clks IMX27_CLK_PER2_GATE>; |
| 286 |
clock-names = "ipg", "per"; |
| 287 |
dmas = <&dma 6>; |
| 288 |
dma-names = "rx-tx"; |
| 289 |
status = "disabled"; |
| 290 |
}; |
| 291 |
|
| 292 |
iomuxc: iomuxc@10015000 { |
| 293 |
compatible = "fsl,imx27-iomuxc"; |
| 294 |
reg = <0x10015000 0x600>; |
| 295 |
#address-cells = <1>; |
| 296 |
#size-cells = <1>; |
| 297 |
ranges; |
| 298 |
|
| 299 |
gpio1: gpio@10015000 { |
| 300 |
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; |
| 301 |
reg = <0x10015000 0x100>; |
| 302 |
clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; |
| 303 |
interrupts = <8>; |
| 304 |
gpio-controller; |
| 305 |
#gpio-cells = <2>; |
| 306 |
interrupt-controller; |
| 307 |
#interrupt-cells = <2>; |
| 308 |
}; |
| 309 |
|
| 310 |
gpio2: gpio@10015100 { |
| 311 |
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; |
| 312 |
reg = <0x10015100 0x100>; |
| 313 |
clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; |
| 314 |
interrupts = <8>; |
| 315 |
gpio-controller; |
| 316 |
#gpio-cells = <2>; |
| 317 |
interrupt-controller; |
| 318 |
#interrupt-cells = <2>; |
| 319 |
}; |
| 320 |
|
| 321 |
gpio3: gpio@10015200 { |
| 322 |
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; |
| 323 |
reg = <0x10015200 0x100>; |
| 324 |
clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; |
| 325 |
interrupts = <8>; |
| 326 |
gpio-controller; |
| 327 |
#gpio-cells = <2>; |
| 328 |
interrupt-controller; |
| 329 |
#interrupt-cells = <2>; |
| 330 |
}; |
| 331 |
|
| 332 |
gpio4: gpio@10015300 { |
| 333 |
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; |
| 334 |
reg = <0x10015300 0x100>; |
| 335 |
clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; |
| 336 |
interrupts = <8>; |
| 337 |
gpio-controller; |
| 338 |
#gpio-cells = <2>; |
| 339 |
interrupt-controller; |
| 340 |
#interrupt-cells = <2>; |
| 341 |
}; |
| 342 |
|
| 343 |
gpio5: gpio@10015400 { |
| 344 |
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; |
| 345 |
reg = <0x10015400 0x100>; |
| 346 |
clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; |
| 347 |
interrupts = <8>; |
| 348 |
gpio-controller; |
| 349 |
#gpio-cells = <2>; |
| 350 |
interrupt-controller; |
| 351 |
#interrupt-cells = <2>; |
| 352 |
}; |
| 353 |
|
| 354 |
gpio6: gpio@10015500 { |
| 355 |
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; |
| 356 |
reg = <0x10015500 0x100>; |
| 357 |
clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; |
| 358 |
interrupts = <8>; |
| 359 |
gpio-controller; |
| 360 |
#gpio-cells = <2>; |
| 361 |
interrupt-controller; |
| 362 |
#interrupt-cells = <2>; |
| 363 |
}; |
| 364 |
}; |
| 365 |
|
| 366 |
audmux: audmux@10016000 { |
| 367 |
compatible = "fsl,imx27-audmux", "fsl,imx21-audmux"; |
| 368 |
reg = <0x10016000 0x1000>; |
| 369 |
clocks = <&clks IMX27_CLK_DUMMY>; |
| 370 |
clock-names = "audmux"; |
| 371 |
status = "disabled"; |
| 372 |
}; |
| 373 |
|
| 374 |
cspi3: spi@10017000 { |
| 375 |
#address-cells = <1>; |
| 376 |
#size-cells = <0>; |
| 377 |
compatible = "fsl,imx27-cspi"; |
| 378 |
reg = <0x10017000 0x1000>; |
| 379 |
interrupts = <6>; |
| 380 |
clocks = <&clks IMX27_CLK_CSPI3_IPG_GATE>, |
| 381 |
<&clks IMX27_CLK_PER2_GATE>; |
| 382 |
clock-names = "ipg", "per"; |
| 383 |
status = "disabled"; |
| 384 |
}; |
| 385 |
|
| 386 |
gpt4: timer@10019000 { |
| 387 |
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; |
| 388 |
reg = <0x10019000 0x1000>; |
| 389 |
interrupts = <4>; |
| 390 |
clocks = <&clks IMX27_CLK_GPT4_IPG_GATE>, |
| 391 |
<&clks IMX27_CLK_PER1_GATE>; |
| 392 |
clock-names = "ipg", "per"; |
| 393 |
}; |
| 394 |
|
| 395 |
gpt5: timer@1001a000 { |
| 396 |
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; |
| 397 |
reg = <0x1001a000 0x1000>; |
| 398 |
interrupts = <3>; |
| 399 |
clocks = <&clks IMX27_CLK_GPT5_IPG_GATE>, |
| 400 |
<&clks IMX27_CLK_PER1_GATE>; |
| 401 |
clock-names = "ipg", "per"; |
| 402 |
}; |
| 403 |
|
| 404 |
uart5: serial@1001b000 { |
| 405 |
compatible = "fsl,imx27-uart", "fsl,imx21-uart"; |
| 406 |
reg = <0x1001b000 0x1000>; |
| 407 |
interrupts = <49>; |
| 408 |
clocks = <&clks IMX27_CLK_UART5_IPG_GATE>, |
| 409 |
<&clks IMX27_CLK_PER1_GATE>; |
| 410 |
clock-names = "ipg", "per"; |
| 411 |
status = "disabled"; |
| 412 |
}; |
| 413 |
|
| 414 |
uart6: serial@1001c000 { |
| 415 |
compatible = "fsl,imx27-uart", "fsl,imx21-uart"; |
| 416 |
reg = <0x1001c000 0x1000>; |
| 417 |
interrupts = <48>; |
| 418 |
clocks = <&clks IMX27_CLK_UART6_IPG_GATE>, |
| 419 |
<&clks IMX27_CLK_PER1_GATE>; |
| 420 |
clock-names = "ipg", "per"; |
| 421 |
status = "disabled"; |
| 422 |
}; |
| 423 |
|
| 424 |
i2c2: i2c@1001d000 { |
| 425 |
#address-cells = <1>; |
| 426 |
#size-cells = <0>; |
| 427 |
compatible = "fsl,imx27-i2c", "fsl,imx21-i2c"; |
| 428 |
reg = <0x1001d000 0x1000>; |
| 429 |
interrupts = <1>; |
| 430 |
clocks = <&clks IMX27_CLK_I2C2_IPG_GATE>; |
| 431 |
status = "disabled"; |
| 432 |
}; |
| 433 |
|
| 434 |
sdhci3: mmc@1001e000 { |
| 435 |
compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; |
| 436 |
reg = <0x1001e000 0x1000>; |
| 437 |
interrupts = <9>; |
| 438 |
clocks = <&clks IMX27_CLK_SDHC3_IPG_GATE>, |
| 439 |
<&clks IMX27_CLK_PER2_GATE>; |
| 440 |
clock-names = "ipg", "per"; |
| 441 |
dmas = <&dma 36>; |
| 442 |
dma-names = "rx-tx"; |
| 443 |
status = "disabled"; |
| 444 |
}; |
| 445 |
|
| 446 |
gpt6: timer@1001f000 { |
| 447 |
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; |
| 448 |
reg = <0x1001f000 0x1000>; |
| 449 |
interrupts = <2>; |
| 450 |
clocks = <&clks IMX27_CLK_GPT6_IPG_GATE>, |
| 451 |
<&clks IMX27_CLK_PER1_GATE>; |
| 452 |
clock-names = "ipg", "per"; |
| 453 |
}; |
| 454 |
}; |
| 455 |
|
| 456 |
aipi2: bus@10020000 { /* AIPI2 */ |
| 457 |
compatible = "fsl,aipi-bus", "simple-bus"; |
| 458 |
#address-cells = <1>; |
| 459 |
#size-cells = <1>; |
| 460 |
reg = <0x10020000 0x20000>; |
| 461 |
ranges; |
| 462 |
|
| 463 |
fb: fb@10021000 { |
| 464 |
compatible = "fsl,imx27-fb", "fsl,imx21-fb"; |
| 465 |
interrupts = <61>; |
| 466 |
reg = <0x10021000 0x1000>; |
| 467 |
clocks = <&clks IMX27_CLK_LCDC_IPG_GATE>, |
| 468 |
<&clks IMX27_CLK_LCDC_AHB_GATE>, |
| 469 |
<&clks IMX27_CLK_PER3_GATE>; |
| 470 |
clock-names = "ipg", "ahb", "per"; |
| 471 |
status = "disabled"; |
| 472 |
}; |
| 473 |
|
| 474 |
coda: coda@10023000 { |
| 475 |
compatible = "fsl,imx27-vpu", "cnm,codadx6"; |
| 476 |
reg = <0x10023000 0x0200>; |
| 477 |
interrupts = <53>; |
| 478 |
clocks = <&clks IMX27_CLK_VPU_BAUD_GATE>, |
| 479 |
<&clks IMX27_CLK_VPU_AHB_GATE>; |
| 480 |
clock-names = "per", "ahb"; |
| 481 |
iram = <&iram>; |
| 482 |
}; |
| 483 |
|
| 484 |
usbotg: usb@10024000 { |
| 485 |
compatible = "fsl,imx27-usb"; |
| 486 |
reg = <0x10024000 0x200>; |
| 487 |
interrupts = <56>; |
| 488 |
clocks = <&clks IMX27_CLK_USB_IPG_GATE>, |
| 489 |
<&clks IMX27_CLK_USB_AHB_GATE>, |
| 490 |
<&clks IMX27_CLK_USB_DIV>; |
| 491 |
clock-names = "ipg", "ahb", "per"; |
| 492 |
fsl,usbmisc = <&usbmisc 0>; |
| 493 |
status = "disabled"; |
| 494 |
}; |
| 495 |
|
| 496 |
usbh1: usb@10024200 { |
| 497 |
compatible = "fsl,imx27-usb"; |
| 498 |
reg = <0x10024200 0x200>; |
| 499 |
interrupts = <54>; |
| 500 |
clocks = <&clks IMX27_CLK_USB_IPG_GATE>, |
| 501 |
<&clks IMX27_CLK_USB_AHB_GATE>, |
| 502 |
<&clks IMX27_CLK_USB_DIV>; |
| 503 |
clock-names = "ipg", "ahb", "per"; |
| 504 |
fsl,usbmisc = <&usbmisc 1>; |
| 505 |
dr_mode = "host"; |
| 506 |
status = "disabled"; |
| 507 |
}; |
| 508 |
|
| 509 |
usbh2: usb@10024400 { |
| 510 |
compatible = "fsl,imx27-usb"; |
| 511 |
reg = <0x10024400 0x200>; |
| 512 |
interrupts = <55>; |
| 513 |
clocks = <&clks IMX27_CLK_USB_IPG_GATE>, |
| 514 |
<&clks IMX27_CLK_USB_AHB_GATE>, |
| 515 |
<&clks IMX27_CLK_USB_DIV>; |
| 516 |
clock-names = "ipg", "ahb", "per"; |
| 517 |
fsl,usbmisc = <&usbmisc 2>; |
| 518 |
dr_mode = "host"; |
| 519 |
status = "disabled"; |
| 520 |
}; |
| 521 |
|
| 522 |
usbmisc: usbmisc@10024600 { |
| 523 |
#index-cells = <1>; |
| 524 |
compatible = "fsl,imx27-usbmisc"; |
| 525 |
reg = <0x10024600 0x200>; |
| 526 |
}; |
| 527 |
|
| 528 |
sahara2: crypto@10025000 { |
| 529 |
compatible = "fsl,imx27-sahara"; |
| 530 |
reg = <0x10025000 0x1000>; |
| 531 |
interrupts = <59>; |
| 532 |
clocks = <&clks IMX27_CLK_SAHARA_IPG_GATE>, |
| 533 |
<&clks IMX27_CLK_SAHARA_AHB_GATE>; |
| 534 |
clock-names = "ipg", "ahb"; |
| 535 |
}; |
| 536 |
|
| 537 |
clks: ccm@10027000 { |
| 538 |
compatible = "fsl,imx27-ccm"; |
| 539 |
reg = <0x10027000 0x1000>; |
| 540 |
#clock-cells = <1>; |
| 541 |
}; |
| 542 |
|
| 543 |
iim: efuse@10028000 { |
| 544 |
compatible = "fsl,imx27-iim"; |
| 545 |
reg = <0x10028000 0x1000>; |
| 546 |
interrupts = <62>; |
| 547 |
clocks = <&clks IMX27_CLK_IIM_IPG_GATE>; |
| 548 |
}; |
| 549 |
|
| 550 |
fec: ethernet@1002b000 { |
| 551 |
compatible = "fsl,imx27-fec"; |
| 552 |
reg = <0x1002b000 0x1000>; |
| 553 |
interrupts = <50>; |
| 554 |
clocks = <&clks IMX27_CLK_FEC_IPG_GATE>, |
| 555 |
<&clks IMX27_CLK_FEC_AHB_GATE>; |
| 556 |
clock-names = "ipg", "ahb"; |
| 557 |
status = "disabled"; |
| 558 |
}; |
| 559 |
}; |
| 560 |
|
| 561 |
nfc: nand-controller@d8000000 { |
| 562 |
#address-cells = <1>; |
| 563 |
#size-cells = <1>; |
| 564 |
compatible = "fsl,imx27-nand"; |
| 565 |
reg = <0xd8000000 0x1000>; |
| 566 |
interrupts = <29>; |
| 567 |
clocks = <&clks IMX27_CLK_NFC_BAUD_GATE>; |
| 568 |
status = "disabled"; |
| 569 |
}; |
| 570 |
|
| 571 |
weim: memory-controller@d8002000 { |
| 572 |
#address-cells = <2>; |
| 573 |
#size-cells = <1>; |
| 574 |
compatible = "fsl,imx27-weim"; |
| 575 |
reg = <0xd8002000 0x1000>; |
| 576 |
clocks = <&clks IMX27_CLK_EMI_AHB_GATE>; |
| 577 |
ranges = < |
| 578 |
0 0 0xc0000000 0x08000000 |
| 579 |
1 0 0xc8000000 0x08000000 |
| 580 |
2 0 0xd0000000 0x02000000 |
| 581 |
3 0 0xd2000000 0x02000000 |
| 582 |
4 0 0xd4000000 0x02000000 |
| 583 |
5 0 0xd6000000 0x02000000 |
| 584 |
>; |
| 585 |
status = "disabled"; |
| 586 |
}; |
| 587 |
|
| 588 |
iram: sram@ffff4c00 { |
| 589 |
compatible = "mmio-sram"; |
| 590 |
reg = <0xffff4c00 0xb400>; |
| 591 |
ranges = <0 0xffff4c00 0xb400>; |
| 592 |
#address-cells = <1>; |
| 593 |
#size-cells = <1>; |
| 594 |
}; |
| 595 |
}; |
| 596 |
}; |