| 1 |
// SPDX-License-Identifier: GPL-2.0 OR MIT |
| 2 |
// |
| 3 |
// Device Tree Source for General Electric B1x5v2 |
| 4 |
// patient monitor series |
| 5 |
// |
| 6 |
// Copyright 2018-2021 General Electric Company |
| 7 |
// Copyright 2018-2021 Collabora |
| 8 |
|
| 9 |
#include <dt-bindings/input/input.h> |
| 10 |
#include "imx6dl-b1x5pv2.dtsi" |
| 11 |
|
| 12 |
/ { |
| 13 |
reg_3v3_acm: regulator-3v3-acm { |
| 14 |
compatible = "regulator-fixed"; |
| 15 |
regulator-name = "3V3 ACM"; |
| 16 |
regulator-min-microvolt = <3300000>; |
| 17 |
regulator-max-microvolt = <3300000>; |
| 18 |
regulator-always-on; |
| 19 |
vin-supply = <®_3v3>; |
| 20 |
}; |
| 21 |
}; |
| 22 |
|
| 23 |
&i2c1 { |
| 24 |
tca6416: gpio-controller@21 { |
| 25 |
compatible = "ti,tca6416"; |
| 26 |
reg = <0x21>; |
| 27 |
gpio-controller; |
| 28 |
#gpio-cells = <2>; |
| 29 |
reset-gpios = <&tca6424a 9 GPIO_ACTIVE_LOW>; |
| 30 |
vcc-supply = <®_3v3_acm>; |
| 31 |
gpio-line-names = "ACM1_EN", "ACM1_CL0", "ACM1_CL1", "ACM1_CL2", |
| 32 |
"", "ACM2_EN", "ACM2_CL0", "ACM2_CL1", |
| 33 |
"ACM2_CL2", "", "", "", |
| 34 |
"", "", "", ""; |
| 35 |
|
| 36 |
/* |
| 37 |
* The interrupt pin is connected to &tca6424a pin 1, but the Linux |
| 38 |
* TCA6424 driver cannot handle low type interrupts at the moment |
| 39 |
* (and support cannot be added without some ugly hacks). Since this |
| 40 |
* controller does not have any input type GPIOs, just pretend |
| 41 |
* that the interrupt pin is unconnected. |
| 42 |
*/ |
| 43 |
}; |
| 44 |
}; |
| 45 |
|
| 46 |
&i2c5 { |
| 47 |
mpl3115a2: pressure-sensor@60 { |
| 48 |
compatible = "fsl,mpl3115"; |
| 49 |
reg = <0x60>; |
| 50 |
vdd-supply = <®_3v3>; |
| 51 |
vddio-supply = <®_3v3>; |
| 52 |
/* |
| 53 |
* The MPL3115 interrupts are connected to pin 22 and 23 |
| 54 |
* of &tca6424a, but the binding does not yet support |
| 55 |
* interrupts. |
| 56 |
*/ |
| 57 |
}; |
| 58 |
}; |