Debian Codegraph @

arch/arm/boot/dts/nxp/imx/e60k02.dtsi

raw
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Copyright 2019 Andreas Kemnade
4 * based on works
5 * Copyright 2016 Freescale Semiconductor, Inc.
6 * and
7 * Copyright (C) 2014 Ricoh Electronic Devices Co., Ltd
8 *
9 * Netronix E60K02 board common.
10 * This board is equipped with different SoCs and
11 * found in ebook-readers like the Kobo Clara HD (with i.MX6SLL) and
12 * the Tolino Shine 3 (with i.MX6SL)
13 */
14 #include <dt-bindings/input/input.h>
15
16 / {
17 aliases {
18 mmc0 = &usdhc2;
19 mmc1 = &usdhc3;
20 };
21
22 chosen {
23 stdout-path = &uart1;
24 };
25
26 epd_pmic_supply: regulator-epd-pmic-in {
27 compatible = "regulator-fixed";
28 regulator-name = "epd_pmic_supply";
29 gpio = <&gpio2 14 GPIO_ACTIVE_HIGH>;
30 enable-active-high;
31 startup-delay-us = <20000>;
32 };
33
34 gpio_keys: gpio-keys {
35 compatible = "gpio-keys";
36
37 key-power {
38 label = "Power";
39 gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
40 linux,code = <KEY_POWER>;
41 wakeup-source;
42 };
43
44 key-cover {
45 label = "Cover";
46 gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
47 linux,code = <SW_LID>;
48 linux,input-type = <EV_SW>;
49 wakeup-source;
50 };
51 };
52
53 leds: leds {
54 compatible = "gpio-leds";
55
56 led {
57 label = "e60k02:white:on";
58 gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
59 linux,default-trigger = "timer";
60 };
61 };
62
63 memory@80000000 {
64 device_type = "memory";
65 reg = <0x80000000 0x20000000>;
66 };
67
68 reg_wifi: regulator-wifi {
69 compatible = "regulator-fixed";
70 regulator-name = "SD3_SPWR";
71 regulator-min-microvolt = <3000000>;
72 regulator-max-microvolt = <3000000>;
73 gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
74 enable-active-high;
75 };
76
77 wifi_pwrseq: wifi_pwrseq {
78 compatible = "mmc-pwrseq-simple";
79 post-power-on-delay-ms = <20>;
80 reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
81 };
82 };
83
84
85 &i2c1 {
86 clock-frequency = <100000>;
87 status = "okay";
88
89 lm3630a: backlight@36 {
90 reg = <0x36>;
91 compatible = "ti,lm3630a";
92 enable-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
93
94 #address-cells = <1>;
95 #size-cells = <0>;
96
97 led@0 {
98 reg = <0>;
99 led-sources = <0>;
100 label = "backlight_warm";
101 default-brightness = <0>;
102 max-brightness = <255>;
103 };
104
105 led@1 {
106 reg = <1>;
107 led-sources = <1>;
108 label = "backlight_cold";
109 default-brightness = <0>;
110 max-brightness = <255>;
111 };
112 };
113 };
114
115 &i2c2 {
116 clock-frequency = <100000>;
117 status = "okay";
118
119 touchscreen@24 {
120 compatible = "cypress,tt21000";
121 reg = <0x24>;
122 pinctrl-names = "default";
123 pinctrl-0 = <&pinctrl_cyttsp5_gpio>;
124 interrupt-parent = <&gpio5>;
125 interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
126 reset-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
127 vdd-supply = <&ldo5_reg>;
128 };
129
130 tps65185: pmic@68 {
131 compatible = "ti,tps65185";
132 reg = <0x68>;
133 interrupt-parent = <&gpio2>;
134 interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
135 vin-supply = <&epd_pmic_supply>;
136 pwr-good-gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
137 vcom-ctrl-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
138 wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
139 enable-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
140
141 regulators {
142 vcom_reg: vcom {
143 regulator-name = "vcom";
144 };
145
146 vposneg_reg: vposneg {
147 regulator-name = "vposneg";
148 regulator-min-microvolt = <15000000>;
149 regulator-max-microvolt = <15000000>;
150 };
151
152 v3p3_reg: v3p3 {
153 regulator-name = "v3p3";
154 };
155 };
156 };
157 };
158
159 &i2c3 {
160 clock-frequency = <100000>;
161 status = "okay";
162
163 ricoh619: pmic@32 {
164 compatible = "ricoh,rc5t619";
165 reg = <0x32>;
166 interrupt-parent = <&gpio5>;
167 interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
168 system-power-controller;
169
170 regulators {
171 dcdc1_reg: DCDC1 {
172 regulator-name = "DCDC1";
173 regulator-min-microvolt = <300000>;
174 regulator-max-microvolt = <1875000>;
175 regulator-always-on;
176 regulator-boot-on;
177
178 regulator-state-mem {
179 regulator-on-in-suspend;
180 regulator-suspend-max-microvolt = <900000>;
181 regulator-suspend-min-microvolt = <900000>;
182 };
183 };
184
185 /* Core3_3V3 */
186 dcdc2_reg: DCDC2 {
187 regulator-name = "DCDC2";
188 regulator-always-on;
189 regulator-boot-on;
190
191 regulator-state-mem {
192 regulator-on-in-suspend;
193 regulator-suspend-max-microvolt = <3300000>;
194 regulator-suspend-min-microvolt = <3300000>;
195 };
196 };
197
198 dcdc3_reg: DCDC3 {
199 regulator-name = "DCDC3";
200 regulator-min-microvolt = <300000>;
201 regulator-max-microvolt = <1875000>;
202 regulator-always-on;
203 regulator-boot-on;
204
205 regulator-state-mem {
206 regulator-on-in-suspend;
207 regulator-suspend-max-microvolt = <1140000>;
208 regulator-suspend-min-microvolt = <1140000>;
209 };
210 };
211
212 /* Core4_1V2 */
213 dcdc4_reg: DCDC4 {
214 regulator-name = "DCDC4";
215 regulator-min-microvolt = <1200000>;
216 regulator-max-microvolt = <1200000>;
217 regulator-always-on;
218 regulator-boot-on;
219
220 regulator-state-mem {
221 regulator-on-in-suspend;
222 regulator-suspend-max-microvolt = <1140000>;
223 regulator-suspend-min-microvolt = <1140000>;
224 };
225 };
226
227 /* Core4_1V8 */
228 dcdc5_reg: DCDC5 {
229 regulator-name = "DCDC5";
230 regulator-min-microvolt = <1800000>;
231 regulator-max-microvolt = <1800000>;
232 regulator-always-on;
233 regulator-boot-on;
234
235 regulator-state-mem {
236 regulator-on-in-suspend;
237 regulator-suspend-max-microvolt = <1700000>;
238 regulator-suspend-min-microvolt = <1700000>;
239 };
240 };
241
242 /* IR_3V3 */
243 ldo1_reg: LDO1 {
244 regulator-name = "LDO1";
245 regulator-boot-on;
246 };
247
248 /* Core1_3V3 */
249 ldo2_reg: LDO2 {
250 regulator-name = "LDO2";
251 regulator-always-on;
252 regulator-boot-on;
253
254 regulator-state-mem {
255 regulator-on-in-suspend;
256 regulator-suspend-max-microvolt = <3000000>;
257 regulator-suspend-min-microvolt = <3000000>;
258 };
259 };
260
261 /* Core5_1V2 */
262 ldo3_reg: LDO3 {
263 regulator-name = "LDO3";
264 regulator-always-on;
265 regulator-boot-on;
266 };
267
268 ldo4_reg: LDO4 {
269 regulator-name = "LDO4";
270 regulator-boot-on;
271 };
272
273 /* SPD_3V3 */
274 ldo5_reg: LDO5 {
275 regulator-name = "LDO5";
276 regulator-always-on;
277 regulator-boot-on;
278 };
279
280 /* DDR_0V6 */
281 ldo6_reg: LDO6 {
282 regulator-name = "LDO6";
283 regulator-always-on;
284 regulator-boot-on;
285 };
286
287 /* VDD_PWM */
288 ldo7_reg: LDO7 {
289 regulator-name = "LDO7";
290 regulator-always-on;
291 regulator-boot-on;
292 };
293
294 /* ldo_1v8 */
295 ldo8_reg: LDO8 {
296 regulator-name = "LDO8";
297 regulator-min-microvolt = <1800000>;
298 regulator-max-microvolt = <1800000>;
299 regulator-always-on;
300 regulator-boot-on;
301 };
302
303 ldo9_reg: LDO9 {
304 regulator-name = "LDO9";
305 regulator-boot-on;
306 };
307
308 ldo10_reg: LDO10 {
309 regulator-name = "LDO10";
310 regulator-boot-on;
311 };
312
313 ldortc1_reg: LDORTC1 {
314 regulator-name = "LDORTC1";
315 regulator-boot-on;
316 };
317 };
318 };
319 };
320
321 &snvs_rtc {
322 /* we are using the rtc in the pmic, not disabled in imx6sll.dtsi */
323 status = "disabled";
324 };
325
326 &uart1 {
327 /* J4, through-hole */
328 status = "okay";
329 };
330
331 &uart4 {
332 /* TP198, next to J4, SMD pads */
333 status = "okay";
334 };
335
336 &usdhc2 {
337 non-removable;
338 status = "okay";
339 };
340
341 &usdhc3 {
342 vmmc-supply = <&reg_wifi>;
343 mmc-pwrseq = <&wifi_pwrseq>;
344 cap-power-off-card;
345 non-removable;
346 status = "okay";
347 };
348
349 &usbotg1 {
350 pinctrl-names = "default";
351 pinctrl-0 = <&pinctrl_usbotg1>;
352 disable-over-current;
353 srp-disable;
354 hnp-disable;
355 adp-disable;
356 status = "okay";
357 };