| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Support for Variscite DART-MX6 Carrier-board |
| 4 |
* |
| 5 |
* Copyright 2017 BayLibre, SAS |
| 6 |
* Author: Neil Armstrong <[email protected]> |
| 7 |
*/ |
| 8 |
|
| 9 |
/dts-v1/; |
| 10 |
|
| 11 |
#include "imx6q.dtsi" |
| 12 |
#include "imx6qdl-var-dart.dtsi" |
| 13 |
#include <dt-bindings/input/linux-event-codes.h> |
| 14 |
|
| 15 |
/ { |
| 16 |
model = "Variscite DART-MX6 Carrier-board"; |
| 17 |
compatible = "variscite,dt6customboard", "fsl,imx6q"; |
| 18 |
|
| 19 |
backlight_lvds: backlight { |
| 20 |
compatible = "pwm-backlight"; |
| 21 |
pwms = <&pwm2 0 50000 0>; |
| 22 |
brightness-levels = <0 4 8 16 32 64 128 248>; |
| 23 |
default-brightness-level = <7>; |
| 24 |
status = "okay"; |
| 25 |
}; |
| 26 |
|
| 27 |
gpio-keys { |
| 28 |
compatible = "gpio-keys"; |
| 29 |
autorepeat; |
| 30 |
|
| 31 |
key-back { |
| 32 |
gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; |
| 33 |
linux,code = <KEY_BACK>; |
| 34 |
label = "Key Back"; |
| 35 |
linux,input-type = <1>; |
| 36 |
debounce-interval = <100>; |
| 37 |
wakeup-source; |
| 38 |
}; |
| 39 |
|
| 40 |
key-home { |
| 41 |
gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; |
| 42 |
linux,code = <KEY_HOME>; |
| 43 |
label = "Key Home"; |
| 44 |
linux,input-type = <1>; |
| 45 |
debounce-interval = <100>; |
| 46 |
wakeup-source; |
| 47 |
}; |
| 48 |
|
| 49 |
key-menu { |
| 50 |
gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; |
| 51 |
linux,code = <KEY_MENU>; |
| 52 |
label = "Key Menu"; |
| 53 |
linux,input-type = <1>; |
| 54 |
debounce-interval = <100>; |
| 55 |
wakeup-source; |
| 56 |
}; |
| 57 |
}; |
| 58 |
|
| 59 |
gpio-leds { |
| 60 |
compatible = "gpio-leds"; |
| 61 |
|
| 62 |
led1 { |
| 63 |
gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>; |
| 64 |
linux,default-trigger = "heartbeat"; |
| 65 |
}; |
| 66 |
|
| 67 |
led2 { |
| 68 |
gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; |
| 69 |
linux,default-trigger = "default-on"; |
| 70 |
}; |
| 71 |
}; |
| 72 |
|
| 73 |
panel1: lvds-panel { |
| 74 |
compatible = "sgd,gktw70sdae4se", "panel-lvds"; |
| 75 |
backlight = <&backlight_lvds>; |
| 76 |
width-mm = <153>; |
| 77 |
height-mm = <86>; |
| 78 |
label = "gktw70sdae4se"; |
| 79 |
data-mapping = "jeida-18"; |
| 80 |
|
| 81 |
panel-timing { |
| 82 |
clock-frequency = <32000000>; |
| 83 |
hactive = <800>; |
| 84 |
vactive = <480>; |
| 85 |
hback-porch = <39>; |
| 86 |
hfront-porch = <39>; |
| 87 |
vback-porch = <29>; |
| 88 |
vfront-porch = <13>; |
| 89 |
hsync-len = <47>; |
| 90 |
vsync-len = <2>; |
| 91 |
}; |
| 92 |
|
| 93 |
port { |
| 94 |
panel_in: endpoint { |
| 95 |
remote-endpoint = <&lvds1_out>; |
| 96 |
}; |
| 97 |
}; |
| 98 |
}; |
| 99 |
|
| 100 |
reg_usb_h1_vbus: regulator-usbh1vbus { |
| 101 |
compatible = "regulator-fixed"; |
| 102 |
regulator-name = "usb_h1_vbus"; |
| 103 |
regulator-min-microvolt = <5000000>; |
| 104 |
regulator-max-microvolt = <5000000>; |
| 105 |
gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; |
| 106 |
enable-active-high; |
| 107 |
}; |
| 108 |
|
| 109 |
reg_usb_otg_vbus: regulator-usbotgvbus { |
| 110 |
compatible = "regulator-fixed"; |
| 111 |
regulator-name = "usb_otg_vbus"; |
| 112 |
regulator-min-microvolt = <5000000>; |
| 113 |
regulator-max-microvolt = <5000000>; |
| 114 |
gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; |
| 115 |
enable-active-high; |
| 116 |
}; |
| 117 |
|
| 118 |
sound { |
| 119 |
compatible = "simple-audio-card"; |
| 120 |
simple-audio-card,name = "dt6-customboard-audio"; |
| 121 |
simple-audio-card,format = "i2s"; |
| 122 |
simple-audio-card,bitclock-master = <&sound_codec>; |
| 123 |
simple-audio-card,frame-master = <&sound_codec>; |
| 124 |
simple-audio-card,widgets = "Headphone", "Headphone Jack", |
| 125 |
"Line", "Line In"; |
| 126 |
simple-audio-card,routing = "Headphone Jack", "HPLOUT", |
| 127 |
"Headphone Jack", "HPROUT", |
| 128 |
"LINE1L", "Line In", |
| 129 |
"LINE1R", "Line In"; |
| 130 |
|
| 131 |
sound_cpu: simple-audio-card,cpu { |
| 132 |
sound-dai = <&ssi2>; |
| 133 |
}; |
| 134 |
|
| 135 |
sound_codec: simple-audio-card,codec { |
| 136 |
sound-dai = <&tlv320aic3106>; |
| 137 |
clocks = <&clks IMX6QDL_CLK_CKO>; |
| 138 |
}; |
| 139 |
}; |
| 140 |
}; |
| 141 |
|
| 142 |
&can1 { |
| 143 |
status = "okay"; |
| 144 |
}; |
| 145 |
|
| 146 |
&ecspi1 { |
| 147 |
cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, |
| 148 |
<&gpio4 10 GPIO_ACTIVE_LOW>; |
| 149 |
status = "okay"; |
| 150 |
}; |
| 151 |
|
| 152 |
&fec { |
| 153 |
status = "okay"; |
| 154 |
phy-mode = "rgmii"; |
| 155 |
phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; |
| 156 |
}; |
| 157 |
|
| 158 |
&hdmi { |
| 159 |
status = "okay"; |
| 160 |
}; |
| 161 |
|
| 162 |
&i2c1 { |
| 163 |
clock-frequency = <100000>; |
| 164 |
status = "okay"; |
| 165 |
}; |
| 166 |
|
| 167 |
&i2c3 { |
| 168 |
clock-frequency = <100000>; |
| 169 |
status = "okay"; |
| 170 |
|
| 171 |
touchscreen@38 { |
| 172 |
compatible = "edt,edt-ft5x06"; |
| 173 |
reg = <0x38>; |
| 174 |
interrupt-parent = <&gpio1>; |
| 175 |
interrupts = <4 IRQ_TYPE_EDGE_FALLING>; |
| 176 |
touchscreen-size-x = <800>; |
| 177 |
touchscreen-size-y = <480>; |
| 178 |
touchscreen-inverted-x; |
| 179 |
touchscreen-inverted-y; |
| 180 |
wakeup-source; |
| 181 |
}; |
| 182 |
|
| 183 |
rtc@68 { |
| 184 |
compatible = "isil,isl12057"; |
| 185 |
reg = <0x68>; |
| 186 |
}; |
| 187 |
}; |
| 188 |
|
| 189 |
&ldb { |
| 190 |
status = "okay"; |
| 191 |
|
| 192 |
lvds-channel@1 { |
| 193 |
status = "okay"; |
| 194 |
|
| 195 |
port@4 { |
| 196 |
reg = <4>; |
| 197 |
|
| 198 |
lvds1_out: endpoint { |
| 199 |
remote-endpoint = <&panel_in>; |
| 200 |
}; |
| 201 |
}; |
| 202 |
}; |
| 203 |
}; |
| 204 |
|
| 205 |
&pwm2 { |
| 206 |
status = "okay"; |
| 207 |
}; |
| 208 |
|
| 209 |
&uart1 { |
| 210 |
status = "okay"; |
| 211 |
}; |
| 212 |
|
| 213 |
&uart3 { |
| 214 |
status = "okay"; |
| 215 |
}; |
| 216 |
|
| 217 |
&usbh1 { |
| 218 |
vbus-supply = <®_usb_h1_vbus>; |
| 219 |
status = "okay"; |
| 220 |
}; |
| 221 |
|
| 222 |
&usbotg { |
| 223 |
vbus-supply = <®_usb_otg_vbus>; |
| 224 |
dr_mode = "otg"; |
| 225 |
srp-disable; |
| 226 |
hnp-disable; |
| 227 |
adp-disable; |
| 228 |
status = "okay"; |
| 229 |
}; |
| 230 |
|
| 231 |
&usdhc2 { |
| 232 |
cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; |
| 233 |
status = "okay"; |
| 234 |
}; |