| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
| 2 |
/* |
| 3 |
* Copyright 2016-2022 Toradex |
| 4 |
*/ |
| 5 |
|
| 6 |
/ { |
| 7 |
/* Fixed crystal dedicated to MCP2515. */ |
| 8 |
clk16m: clk16m { |
| 9 |
compatible = "fixed-clock"; |
| 10 |
#clock-cells = <0>; |
| 11 |
clock-frequency = <16000000>; |
| 12 |
}; |
| 13 |
}; |
| 14 |
|
| 15 |
/* Colibri AD0 to AD3 */ |
| 16 |
&adc1 { |
| 17 |
status = "okay"; |
| 18 |
}; |
| 19 |
|
| 20 |
/* |
| 21 |
* The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3. |
| 22 |
* So if you enable following capacitive touch controller, disable pwm2/pwm3 first. |
| 23 |
*/ |
| 24 |
&atmel_mxt_ts { |
| 25 |
interrupt-parent = <&gpio1>; |
| 26 |
interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 / INT */ |
| 27 |
pinctrl-0 = <&pinctrl_atmel_adapter>; |
| 28 |
reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* SODIMM 30 / RST */ |
| 29 |
status = "disabled"; |
| 30 |
}; |
| 31 |
|
| 32 |
/* Colibri SSP */ |
| 33 |
&ecspi3 { |
| 34 |
status = "okay"; |
| 35 |
|
| 36 |
mcp2515: can@0 { |
| 37 |
clocks = <&clk16m>; |
| 38 |
compatible = "microchip,mcp2515"; |
| 39 |
interrupt-parent = <&gpio5>; |
| 40 |
interrupts = <2 IRQ_TYPE_EDGE_FALLING>; |
| 41 |
pinctrl-names = "default"; |
| 42 |
pinctrl-0 = <&pinctrl_can_int>; |
| 43 |
reg = <0>; |
| 44 |
spi-max-frequency = <10000000>; |
| 45 |
vdd-supply = <®_3v3>; |
| 46 |
xceiver-supply = <®_5v0>; |
| 47 |
}; |
| 48 |
}; |
| 49 |
|
| 50 |
/* Colibri Fast Ethernet */ |
| 51 |
&fec1 { |
| 52 |
status = "okay"; |
| 53 |
}; |
| 54 |
|
| 55 |
/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */ |
| 56 |
&i2c4 { |
| 57 |
status = "okay"; |
| 58 |
}; |
| 59 |
|
| 60 |
/* Colibri PWM<A> */ |
| 61 |
&pwm1 { |
| 62 |
status = "okay"; |
| 63 |
}; |
| 64 |
|
| 65 |
/* Colibri PWM<B> */ |
| 66 |
&pwm2 { |
| 67 |
/* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */ |
| 68 |
status = "okay"; |
| 69 |
}; |
| 70 |
|
| 71 |
/* Colibri PWM<C> */ |
| 72 |
&pwm3 { |
| 73 |
/* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */ |
| 74 |
status = "okay"; |
| 75 |
}; |
| 76 |
|
| 77 |
/* Colibri PWM<D> */ |
| 78 |
&pwm4 { |
| 79 |
status = "okay"; |
| 80 |
}; |
| 81 |
|
| 82 |
/* M41T0M6 real time clock */ |
| 83 |
&rtc { |
| 84 |
status = "okay"; |
| 85 |
}; |
| 86 |
|
| 87 |
/* Colibri UART_A */ |
| 88 |
&uart1 { |
| 89 |
status = "okay"; |
| 90 |
}; |
| 91 |
|
| 92 |
/* Colibri UART_B */ |
| 93 |
&uart2 { |
| 94 |
status = "okay"; |
| 95 |
}; |
| 96 |
|
| 97 |
/* Colibri UART_C */ |
| 98 |
&uart3 { |
| 99 |
status = "okay"; |
| 100 |
}; |
| 101 |
|
| 102 |
/* Colibri USBC */ |
| 103 |
&usbotg1 { |
| 104 |
disable-over-current; |
| 105 |
status = "okay"; |
| 106 |
}; |
| 107 |
|
| 108 |
/* Colibri MMC/SD */ |
| 109 |
&usdhc1 { |
| 110 |
status = "okay"; |
| 111 |
}; |