| 1 |
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
| 2 |
/* |
| 3 |
* Copyright 2014-2022 Toradex |
| 4 |
* Copyright 2012 Freescale Semiconductor, Inc. |
| 5 |
* Copyright 2011 Linaro Ltd. |
| 6 |
*/ |
| 7 |
|
| 8 |
/dts-v1/; |
| 9 |
|
| 10 |
#include <dt-bindings/gpio/gpio.h> |
| 11 |
#include <dt-bindings/input/input.h> |
| 12 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 13 |
#include "imx6q.dtsi" |
| 14 |
#include "imx6qdl-apalis.dtsi" |
| 15 |
|
| 16 |
/ { |
| 17 |
model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board"; |
| 18 |
compatible = "toradex,apalis_imx6q-ixora", "toradex,apalis_imx6q", |
| 19 |
"fsl,imx6q"; |
| 20 |
|
| 21 |
aliases { |
| 22 |
i2c0 = &i2c1; |
| 23 |
i2c1 = &i2c3; |
| 24 |
i2c2 = &i2c2; |
| 25 |
rtc0 = &rtc_i2c; |
| 26 |
rtc1 = &snvs_rtc; |
| 27 |
}; |
| 28 |
|
| 29 |
chosen { |
| 30 |
stdout-path = "serial0:115200n8"; |
| 31 |
}; |
| 32 |
|
| 33 |
leds { |
| 34 |
compatible = "gpio-leds"; |
| 35 |
pinctrl-names = "default"; |
| 36 |
pinctrl-0 = <&pinctrl_leds_ixora>; |
| 37 |
|
| 38 |
led4-green { |
| 39 |
gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; |
| 40 |
label = "LED_4_GREEN"; |
| 41 |
}; |
| 42 |
|
| 43 |
led4-red { |
| 44 |
gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; |
| 45 |
label = "LED_4_RED"; |
| 46 |
}; |
| 47 |
|
| 48 |
led5-green { |
| 49 |
gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; |
| 50 |
label = "LED_5_GREEN"; |
| 51 |
}; |
| 52 |
|
| 53 |
led5-red { |
| 54 |
gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; |
| 55 |
label = "LED_5_RED"; |
| 56 |
}; |
| 57 |
}; |
| 58 |
}; |
| 59 |
|
| 60 |
&can1 { |
| 61 |
status = "okay"; |
| 62 |
}; |
| 63 |
|
| 64 |
&can2 { |
| 65 |
status = "okay"; |
| 66 |
}; |
| 67 |
|
| 68 |
/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ |
| 69 |
&i2c1 { |
| 70 |
status = "okay"; |
| 71 |
|
| 72 |
eeprom@50 { |
| 73 |
compatible = "atmel,24c02"; |
| 74 |
reg = <0x50>; |
| 75 |
}; |
| 76 |
|
| 77 |
/* M41T0M6 real time clock on carrier board */ |
| 78 |
rtc_i2c: rtc@68 { |
| 79 |
compatible = "st,m41t0"; |
| 80 |
reg = <0x68>; |
| 81 |
}; |
| 82 |
}; |
| 83 |
|
| 84 |
/* |
| 85 |
* I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier |
| 86 |
* board) |
| 87 |
*/ |
| 88 |
&i2c3 { |
| 89 |
status = "okay"; |
| 90 |
}; |
| 91 |
|
| 92 |
&pcie { |
| 93 |
pinctrl-names = "default"; |
| 94 |
pinctrl-0 = <&pinctrl_reset_moci>; |
| 95 |
/* active-high meaning opposite of regular PERST# active-low polarity */ |
| 96 |
reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; |
| 97 |
reset-gpio-active-high; |
| 98 |
status = "okay"; |
| 99 |
}; |
| 100 |
|
| 101 |
&pwm1 { |
| 102 |
status = "okay"; |
| 103 |
}; |
| 104 |
|
| 105 |
&pwm2 { |
| 106 |
status = "okay"; |
| 107 |
}; |
| 108 |
|
| 109 |
&pwm3 { |
| 110 |
status = "okay"; |
| 111 |
}; |
| 112 |
|
| 113 |
&pwm4 { |
| 114 |
status = "okay"; |
| 115 |
}; |
| 116 |
|
| 117 |
®_usb_host_vbus { |
| 118 |
status = "okay"; |
| 119 |
}; |
| 120 |
|
| 121 |
®_usb_otg_vbus { |
| 122 |
status = "okay"; |
| 123 |
}; |
| 124 |
|
| 125 |
&sata { |
| 126 |
status = "okay"; |
| 127 |
}; |
| 128 |
|
| 129 |
&sound_spdif { |
| 130 |
status = "okay"; |
| 131 |
}; |
| 132 |
|
| 133 |
&spdif { |
| 134 |
status = "okay"; |
| 135 |
}; |
| 136 |
|
| 137 |
&uart1 { |
| 138 |
status = "okay"; |
| 139 |
}; |
| 140 |
|
| 141 |
&uart2 { |
| 142 |
status = "okay"; |
| 143 |
}; |
| 144 |
|
| 145 |
&uart4 { |
| 146 |
status = "okay"; |
| 147 |
}; |
| 148 |
|
| 149 |
&uart5 { |
| 150 |
status = "okay"; |
| 151 |
}; |
| 152 |
|
| 153 |
&usbh1 { |
| 154 |
disable-over-current; |
| 155 |
vbus-supply = <®_usb_host_vbus>; |
| 156 |
status = "okay"; |
| 157 |
}; |
| 158 |
|
| 159 |
&usbotg { |
| 160 |
disable-over-current; |
| 161 |
vbus-supply = <®_usb_otg_vbus>; |
| 162 |
status = "okay"; |
| 163 |
}; |
| 164 |
|
| 165 |
/* SD1 */ |
| 166 |
&usdhc2 { |
| 167 |
cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; |
| 168 |
pinctrl-names = "default"; |
| 169 |
pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>; |
| 170 |
status = "okay"; |
| 171 |
}; |
| 172 |
|
| 173 |
&iomuxc { |
| 174 |
pinctrl_leds_ixora: ledsixoragrp { |
| 175 |
fsl,pins = < |
| 176 |
MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0 |
| 177 |
MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b0 |
| 178 |
MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 |
| 179 |
MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 |
| 180 |
>; |
| 181 |
}; |
| 182 |
}; |