| 1 |
// SPDX-License-Identifier: GPL-2.0+ OR MIT |
| 2 |
// |
| 3 |
// Copyright 2015 Freescale Semiconductor, Inc. |
| 4 |
// Copyright 2016 Toradex AG |
| 5 |
|
| 6 |
#include "imx7s.dtsi" |
| 7 |
#include <dt-bindings/reset/imx7-reset.h> |
| 8 |
|
| 9 |
/ { |
| 10 |
aliases { |
| 11 |
usb0 = &usbotg1; |
| 12 |
usb1 = &usbotg2; |
| 13 |
usb2 = &usbh; |
| 14 |
}; |
| 15 |
|
| 16 |
cpus { |
| 17 |
cpu0: cpu@0 { |
| 18 |
clock-frequency = <996000000>; |
| 19 |
operating-points-v2 = <&cpu0_opp_table>; |
| 20 |
#cooling-cells = <2>; |
| 21 |
nvmem-cells = <&fuse_grade>; |
| 22 |
nvmem-cell-names = "speed_grade"; |
| 23 |
}; |
| 24 |
|
| 25 |
cpu1: cpu@1 { |
| 26 |
compatible = "arm,cortex-a7"; |
| 27 |
device_type = "cpu"; |
| 28 |
reg = <1>; |
| 29 |
clock-frequency = <996000000>; |
| 30 |
operating-points-v2 = <&cpu0_opp_table>; |
| 31 |
#cooling-cells = <2>; |
| 32 |
cpu-idle-states = <&cpu_sleep_wait>; |
| 33 |
}; |
| 34 |
}; |
| 35 |
|
| 36 |
timer { |
| 37 |
compatible = "arm,armv7-timer"; |
| 38 |
interrupt-parent = <&intc>; |
| 39 |
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, |
| 40 |
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, |
| 41 |
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, |
| 42 |
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; |
| 43 |
}; |
| 44 |
|
| 45 |
cpu0_opp_table: opp-table { |
| 46 |
compatible = "operating-points-v2"; |
| 47 |
opp-shared; |
| 48 |
|
| 49 |
opp-792000000 { |
| 50 |
opp-hz = /bits/ 64 <792000000>; |
| 51 |
opp-microvolt = <1000000 950000 1250000>; |
| 52 |
clock-latency-ns = <150000>; |
| 53 |
opp-supported-hw = <0xd>, <0x7>; |
| 54 |
opp-suspend; |
| 55 |
}; |
| 56 |
|
| 57 |
opp-996000000 { |
| 58 |
opp-hz = /bits/ 64 <996000000>; |
| 59 |
opp-microvolt = <1100000 1045000 1250000>; |
| 60 |
clock-latency-ns = <150000>; |
| 61 |
opp-supported-hw = <0xc>, <0x7>; |
| 62 |
opp-suspend; |
| 63 |
}; |
| 64 |
|
| 65 |
opp-1200000000 { |
| 66 |
opp-hz = /bits/ 64 <1200000000>; |
| 67 |
opp-microvolt = <1225000 1200000 1250000>; |
| 68 |
clock-latency-ns = <150000>; |
| 69 |
opp-supported-hw = <0x8>, <0x3>; |
| 70 |
opp-suspend; |
| 71 |
}; |
| 72 |
}; |
| 73 |
|
| 74 |
usbphynop2: usbphynop2 { |
| 75 |
compatible = "usb-nop-xceiv"; |
| 76 |
clocks = <&clks IMX7D_USB_PHY2_CLK>; |
| 77 |
clock-names = "main_clk"; |
| 78 |
#phy-cells = <0>; |
| 79 |
}; |
| 80 |
|
| 81 |
soc: soc { |
| 82 |
etm@3007d000 { |
| 83 |
compatible = "arm,coresight-etm3x", "arm,primecell"; |
| 84 |
reg = <0x3007d000 0x1000>; |
| 85 |
|
| 86 |
/* |
| 87 |
* System will hang if added nosmp in kernel command line |
| 88 |
* without arm,primecell-periphid because amba bus try to |
| 89 |
* read id and core1 power off at this time. |
| 90 |
*/ |
| 91 |
arm,primecell-periphid = <0xbb956>; |
| 92 |
cpu = <&cpu1>; |
| 93 |
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; |
| 94 |
clock-names = "apb_pclk"; |
| 95 |
|
| 96 |
out-ports { |
| 97 |
port { |
| 98 |
etm1_out_port: endpoint { |
| 99 |
remote-endpoint = <&ca_funnel_in_port1>; |
| 100 |
}; |
| 101 |
}; |
| 102 |
}; |
| 103 |
}; |
| 104 |
|
| 105 |
intc: interrupt-controller@31001000 { |
| 106 |
compatible = "arm,cortex-a7-gic"; |
| 107 |
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; |
| 108 |
#interrupt-cells = <3>; |
| 109 |
interrupt-controller; |
| 110 |
interrupt-parent = <&intc>; |
| 111 |
reg = <0x31001000 0x1000>, |
| 112 |
<0x31002000 0x2000>, |
| 113 |
<0x31004000 0x2000>, |
| 114 |
<0x31006000 0x2000>; |
| 115 |
}; |
| 116 |
|
| 117 |
pcie: pcie@33800000 { |
| 118 |
compatible = "fsl,imx7d-pcie"; |
| 119 |
reg = <0x33800000 0x4000>, |
| 120 |
<0x4ff00000 0x80000>; |
| 121 |
reg-names = "dbi", "config"; |
| 122 |
#address-cells = <3>; |
| 123 |
#size-cells = <2>; |
| 124 |
device_type = "pci"; |
| 125 |
bus-range = <0x00 0xff>; |
| 126 |
ranges = <0x81000000 0 0 0x4ff80000 0 0x00010000>, /* downstream I/O */ |
| 127 |
<0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */ |
| 128 |
num-lanes = <1>; |
| 129 |
interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; |
| 130 |
interrupt-names = "msi"; |
| 131 |
#interrupt-cells = <1>; |
| 132 |
interrupt-map-mask = <0 0 0 0x7>; |
| 133 |
/* |
| 134 |
* Reference manual lists pci irqs incorrectly |
| 135 |
* Real hardware ordering is same as imx6: D+MSI, C, B, A |
| 136 |
*/ |
| 137 |
interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, |
| 138 |
<0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, |
| 139 |
<0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, |
| 140 |
<0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; |
| 141 |
clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>, |
| 142 |
<&clks IMX7D_PLL_ENET_MAIN_100M_CLK>, |
| 143 |
<&clks IMX7D_PCIE_PHY_ROOT_CLK>; |
| 144 |
clock-names = "pcie", "pcie_bus", "pcie_phy"; |
| 145 |
assigned-clocks = <&clks IMX7D_PCIE_CTRL_ROOT_SRC>, |
| 146 |
<&clks IMX7D_PCIE_PHY_ROOT_SRC>; |
| 147 |
assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_250M_CLK>, |
| 148 |
<&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; |
| 149 |
|
| 150 |
fsl,max-link-speed = <2>; |
| 151 |
power-domains = <&pgc_pcie_phy>; |
| 152 |
resets = <&src IMX7_RESET_PCIEPHY>, |
| 153 |
<&src IMX7_RESET_PCIE_CTRL_APPS_EN>, |
| 154 |
<&src IMX7_RESET_PCIE_CTRL_APPS_TURNOFF>; |
| 155 |
reset-names = "pciephy", "apps", "turnoff"; |
| 156 |
fsl,imx7d-pcie-phy = <&pcie_phy>; |
| 157 |
status = "disabled"; |
| 158 |
}; |
| 159 |
}; |
| 160 |
}; |
| 161 |
|
| 162 |
&aips2 { |
| 163 |
pcie_phy: pcie-phy@306d0000 { |
| 164 |
compatible = "fsl,imx7d-pcie-phy"; |
| 165 |
reg = <0x306d0000 0x10000>; |
| 166 |
status = "disabled"; |
| 167 |
}; |
| 168 |
|
| 169 |
pxp: pxp@30700000 { |
| 170 |
compatible = "fsl,imx7d-pxp"; |
| 171 |
reg = <0x30700000 0x10000>; |
| 172 |
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| 173 |
<GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; |
| 174 |
clocks = <&clks IMX7D_PXP_CLK>; |
| 175 |
clock-names = "axi"; |
| 176 |
}; |
| 177 |
}; |
| 178 |
|
| 179 |
&aips3 { |
| 180 |
usbotg2: usb@30b20000 { |
| 181 |
compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; |
| 182 |
reg = <0x30b20000 0x200>; |
| 183 |
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| 184 |
clocks = <&clks IMX7D_USB_CTRL_CLK>; |
| 185 |
fsl,usbphy = <&usbphynop2>; |
| 186 |
fsl,usbmisc = <&usbmisc2 0>; |
| 187 |
phy-clkgate-delay-us = <400>; |
| 188 |
status = "disabled"; |
| 189 |
}; |
| 190 |
|
| 191 |
usbmisc2: usbmisc@30b20200 { |
| 192 |
#index-cells = <1>; |
| 193 |
compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; |
| 194 |
reg = <0x30b20200 0x200>; |
| 195 |
}; |
| 196 |
|
| 197 |
fec2: ethernet@30bf0000 { |
| 198 |
compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec"; |
| 199 |
reg = <0x30bf0000 0x10000>; |
| 200 |
interrupt-names = "int0", "int1", "int2", "pps"; |
| 201 |
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, |
| 202 |
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, |
| 203 |
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, |
| 204 |
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; |
| 205 |
clocks = <&clks IMX7D_ENET2_IPG_ROOT_CLK>, |
| 206 |
<&clks IMX7D_ENET_AXI_ROOT_CLK>, |
| 207 |
<&clks IMX7D_ENET2_TIME_ROOT_CLK>, |
| 208 |
<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>, |
| 209 |
<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; |
| 210 |
clock-names = "ipg", "ahb", "ptp", |
| 211 |
"enet_clk_ref", "enet_out"; |
| 212 |
fsl,num-tx-queues = <3>; |
| 213 |
fsl,num-rx-queues = <3>; |
| 214 |
fsl,stop-mode = <&gpr 0x10 4>; |
| 215 |
status = "disabled"; |
| 216 |
}; |
| 217 |
}; |
| 218 |
|
| 219 |
&ca_funnel_in_ports { |
| 220 |
port@1 { |
| 221 |
reg = <1>; |
| 222 |
ca_funnel_in_port1: endpoint { |
| 223 |
remote-endpoint = <&etm1_out_port>; |
| 224 |
}; |
| 225 |
}; |
| 226 |
}; |