| 1 |
// SPDX-License-Identifier: (GPL-2.0) |
| 2 |
/* |
| 3 |
* Device tree for the Kobo Clara 2E rev B ebook reader |
| 4 |
* |
| 5 |
* Name on mainboard is: 37NB-E60K2M+4B0 |
| 6 |
* Serials start with: E60K2M (a number also seen in |
| 7 |
* vendor kernel sources) |
| 8 |
* |
| 9 |
* Copyright 2024 Andreas Kemnade |
| 10 |
*/ |
| 11 |
|
| 12 |
/dts-v1/; |
| 13 |
|
| 14 |
#include "imx6sll-kobo-clara2e-common.dtsi" |
| 15 |
|
| 16 |
/ { |
| 17 |
model = "Kobo Clara 2E"; |
| 18 |
compatible = "kobo,clara2e-b", "kobo,clara2e", "fsl,imx6sll"; |
| 19 |
|
| 20 |
epd_pmic_supply: regulator-epd-pmic-in { |
| 21 |
compatible = "regulator-fixed"; |
| 22 |
pinctrl-names = "default"; |
| 23 |
pinctrl-0 = <&pinctrl_epd_pmic_supply>; |
| 24 |
regulator-name = "epd_pmic_supply"; |
| 25 |
gpio = <&gpio2 14 GPIO_ACTIVE_HIGH>; |
| 26 |
enable-active-high; |
| 27 |
startup-delay-us = <20000>; |
| 28 |
}; |
| 29 |
}; |
| 30 |
|
| 31 |
&i2c2 { |
| 32 |
jd9930: pmic@18 { |
| 33 |
compatible = "fitipower,jd9930", "fitipower,fp9931"; |
| 34 |
reg = <0x18>; |
| 35 |
pinctrl-names = "default"; |
| 36 |
pinctrl-0 = <&pinctrl_jd9930_gpio>; |
| 37 |
vin-supply = <&epd_pmic_supply>; |
| 38 |
pg-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>; |
| 39 |
en-ts-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>; |
| 40 |
enable-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; |
| 41 |
fitipower,tdly-ms = <2 2 2 2>; |
| 42 |
|
| 43 |
regulators { |
| 44 |
vcom_reg: vcom { |
| 45 |
regulator-name = "vcom"; |
| 46 |
/* |
| 47 |
* For optimal performance these should be |
| 48 |
* tuned on a per batch basis e.g. using |
| 49 |
* overlays. |
| 50 |
*/ |
| 51 |
regulator-min-microvolt = <2352840>; |
| 52 |
regulator-max-microvolt = <2352840>; |
| 53 |
}; |
| 54 |
|
| 55 |
vposneg_reg: vposneg { |
| 56 |
regulator-name = "vposneg"; |
| 57 |
regulator-min-microvolt = <15060000>; |
| 58 |
regulator-max-microvolt = <15060000>; |
| 59 |
}; |
| 60 |
|
| 61 |
v3p3_reg: v3p3 { |
| 62 |
regulator-name = "v3p3"; |
| 63 |
}; |
| 64 |
}; |
| 65 |
}; |
| 66 |
}; |
| 67 |
|
| 68 |
&iomuxc { |
| 69 |
pinctrl_jd9930_gpio: jd9930-gpiogrp { |
| 70 |
fsl,pins = < |
| 71 |
MX6SLL_PAD_EPDC_PWR_CTRL0__GPIO2_IO07 0x17059 /* PG */ |
| 72 |
MX6SLL_PAD_EPDC_PWR_CTRL1__GPIO2_IO08 0x40010059 /* EN */ |
| 73 |
MX6SLL_PAD_EPDC_PWR_CTRL2__GPIO2_IO09 0x40010059 /* EN_TS */ |
| 74 |
>; |
| 75 |
}; |
| 76 |
|
| 77 |
pinctrl_epd_pmic_supply: epd-pmic-supplygrp { |
| 78 |
fsl,pins = < |
| 79 |
MX6SLL_PAD_EPDC_PWR_WAKE__GPIO2_IO14 0x40010059 |
| 80 |
>; |
| 81 |
}; |
| 82 |
}; |