| 1 |
// SPDX-License-Identifier: GPL-2.0+ |
| 2 |
/* |
| 3 |
* Copyright (C) 2015-2021 DH electronics GmbH |
| 4 |
* Copyright (C) 2018 Marek Vasut <[email protected]> |
| 5 |
*/ |
| 6 |
|
| 7 |
#include <dt-bindings/gpio/gpio.h> |
| 8 |
#include <dt-bindings/input/input.h> |
| 9 |
#include <dt-bindings/leds/common.h> |
| 10 |
#include <dt-bindings/pwm/pwm.h> |
| 11 |
|
| 12 |
/ { |
| 13 |
chosen { |
| 14 |
stdout-path = "serial0:115200n8"; |
| 15 |
}; |
| 16 |
|
| 17 |
clk_ext_audio_codec: clock-codec { |
| 18 |
#clock-cells = <0>; |
| 19 |
clock-frequency = <24000000>; |
| 20 |
compatible = "fixed-clock"; |
| 21 |
}; |
| 22 |
|
| 23 |
display_bl: display-bl { |
| 24 |
brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>; |
| 25 |
compatible = "pwm-backlight"; |
| 26 |
default-brightness-level = <8>; |
| 27 |
enable-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; /* GPIO G */ |
| 28 |
pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>; |
| 29 |
status = "okay"; |
| 30 |
}; |
| 31 |
|
| 32 |
lcd_display: disp0 { |
| 33 |
#address-cells = <1>; |
| 34 |
#size-cells = <0>; |
| 35 |
compatible = "fsl,imx-parallel-display"; |
| 36 |
interface-pix-fmt = "rgb24"; |
| 37 |
pinctrl-0 = <&pinctrl_ipu1_lcdif &pinctrl_dhcom_g>; |
| 38 |
pinctrl-names = "default"; |
| 39 |
status = "okay"; |
| 40 |
|
| 41 |
port@0 { |
| 42 |
reg = <0>; |
| 43 |
|
| 44 |
lcd_display_in: endpoint { |
| 45 |
remote-endpoint = <&ipu1_di0_disp0>; |
| 46 |
}; |
| 47 |
}; |
| 48 |
|
| 49 |
port@1 { |
| 50 |
reg = <1>; |
| 51 |
|
| 52 |
lcd_display_out: endpoint { |
| 53 |
remote-endpoint = <&lcd_panel_in>; |
| 54 |
}; |
| 55 |
}; |
| 56 |
}; |
| 57 |
|
| 58 |
gpio-keys { |
| 59 |
compatible = "gpio-keys"; |
| 60 |
|
| 61 |
button-0 { |
| 62 |
gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* GPIO A */ |
| 63 |
label = "TA1-GPIO-A"; |
| 64 |
linux,code = <KEY_A>; |
| 65 |
pinctrl-0 = <&pinctrl_dhcom_a>; |
| 66 |
pinctrl-names = "default"; |
| 67 |
wakeup-source; |
| 68 |
}; |
| 69 |
|
| 70 |
button-1 { |
| 71 |
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* GPIO B */ |
| 72 |
label = "TA2-GPIO-B"; |
| 73 |
linux,code = <KEY_B>; |
| 74 |
pinctrl-0 = <&pinctrl_dhcom_b>; |
| 75 |
pinctrl-names = "default"; |
| 76 |
wakeup-source; |
| 77 |
}; |
| 78 |
|
| 79 |
button-2 { |
| 80 |
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; /* GPIO C */ |
| 81 |
label = "TA3-GPIO-C"; |
| 82 |
linux,code = <KEY_C>; |
| 83 |
pinctrl-0 = <&pinctrl_dhcom_c>; |
| 84 |
pinctrl-names = "default"; |
| 85 |
wakeup-source; |
| 86 |
}; |
| 87 |
|
| 88 |
button-3 { |
| 89 |
gpios = <&gpio6 3 GPIO_ACTIVE_LOW>; /* GPIO D */ |
| 90 |
label = "TA4-GPIO-D"; |
| 91 |
linux,code = <KEY_D>; |
| 92 |
pinctrl-0 = <&pinctrl_dhcom_d>; |
| 93 |
pinctrl-names = "default"; |
| 94 |
wakeup-source; |
| 95 |
}; |
| 96 |
}; |
| 97 |
|
| 98 |
led { |
| 99 |
compatible = "gpio-leds"; |
| 100 |
|
| 101 |
/* |
| 102 |
* Disable led-5, because GPIO E is |
| 103 |
* already used as touch interrupt. |
| 104 |
*/ |
| 105 |
led-5 { |
| 106 |
color = <LED_COLOR_ID_GREEN>; |
| 107 |
default-state = "off"; |
| 108 |
function = LED_FUNCTION_INDICATOR; |
| 109 |
gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* GPIO E */ |
| 110 |
pinctrl-0 = <&pinctrl_dhcom_e>; |
| 111 |
pinctrl-names = "default"; |
| 112 |
status = "disabled"; |
| 113 |
}; |
| 114 |
|
| 115 |
led-6 { |
| 116 |
color = <LED_COLOR_ID_GREEN>; |
| 117 |
default-state = "off"; |
| 118 |
function = LED_FUNCTION_INDICATOR; |
| 119 |
gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>; /* GPIO F */ |
| 120 |
pinctrl-0 = <&pinctrl_dhcom_f>; |
| 121 |
pinctrl-names = "default"; |
| 122 |
}; |
| 123 |
|
| 124 |
led-7 { |
| 125 |
color = <LED_COLOR_ID_GREEN>; |
| 126 |
default-state = "off"; |
| 127 |
function = LED_FUNCTION_INDICATOR; |
| 128 |
gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* GPIO H */ |
| 129 |
pinctrl-0 = <&pinctrl_dhcom_h>; |
| 130 |
pinctrl-names = "default"; |
| 131 |
}; |
| 132 |
|
| 133 |
led-8 { |
| 134 |
color = <LED_COLOR_ID_GREEN>; |
| 135 |
default-state = "off"; |
| 136 |
function = LED_FUNCTION_INDICATOR; |
| 137 |
gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO I */ |
| 138 |
pinctrl-0 = <&pinctrl_dhcom_i>; |
| 139 |
pinctrl-names = "default"; |
| 140 |
}; |
| 141 |
}; |
| 142 |
|
| 143 |
panel { |
| 144 |
backlight = <&display_bl>; |
| 145 |
compatible = "edt,etm0700g0edh6"; |
| 146 |
power-supply = <®_panel_3v3>; |
| 147 |
|
| 148 |
port { |
| 149 |
lcd_panel_in: endpoint { |
| 150 |
remote-endpoint = <&lcd_display_out>; |
| 151 |
}; |
| 152 |
}; |
| 153 |
}; |
| 154 |
|
| 155 |
/* Filtered supply voltage */ |
| 156 |
reg_pdk2_24v: regulator-pdk2-24v { |
| 157 |
compatible = "regulator-fixed"; |
| 158 |
regulator-always-on; |
| 159 |
regulator-max-microvolt = <24000000>; |
| 160 |
regulator-min-microvolt = <24000000>; |
| 161 |
regulator-name = "24V_PDK2"; |
| 162 |
}; |
| 163 |
|
| 164 |
/* 560-200 U1 */ |
| 165 |
reg_panel_3v3: regulator-panel-3v3 { |
| 166 |
compatible = "regulator-fixed"; |
| 167 |
regulator-always-on; |
| 168 |
regulator-min-microvolt = <3300000>; |
| 169 |
regulator-max-microvolt = <3300000>; |
| 170 |
regulator-name = "3V3_PANEL"; |
| 171 |
vin-supply = <®_pdk2_24v>; |
| 172 |
}; |
| 173 |
|
| 174 |
sound { |
| 175 |
audio-codec = <&sgtl5000>; |
| 176 |
audio-routing = |
| 177 |
"MIC_IN", "Mic Jack", |
| 178 |
"Mic Jack", "Mic Bias", |
| 179 |
"LINE_IN", "Line In Jack", |
| 180 |
"Headphone Jack", "HP_OUT"; |
| 181 |
compatible = "fsl,imx-audio-sgtl5000"; |
| 182 |
model = "imx-sgtl5000"; |
| 183 |
mux-ext-port = <3>; |
| 184 |
mux-int-port = <1>; |
| 185 |
ssi-controller = <&ssi1>; |
| 186 |
}; |
| 187 |
}; |
| 188 |
|
| 189 |
&audmux { |
| 190 |
pinctrl-0 = <&pinctrl_audmux_ext>; |
| 191 |
pinctrl-names = "default"; |
| 192 |
status = "okay"; |
| 193 |
}; |
| 194 |
|
| 195 |
&can1 { |
| 196 |
status = "okay"; |
| 197 |
}; |
| 198 |
|
| 199 |
&can2 { |
| 200 |
status = "disabled"; |
| 201 |
}; |
| 202 |
|
| 203 |
/* 1G ethernet */ |
| 204 |
/delete-node/ ðphy0; |
| 205 |
&fec { |
| 206 |
phy-mode = "rgmii"; |
| 207 |
phy-handle = <ðphy7>; |
| 208 |
pinctrl-0 = <&pinctrl_enet_1G>; |
| 209 |
pinctrl-names = "default"; |
| 210 |
status = "okay"; |
| 211 |
|
| 212 |
mdio { |
| 213 |
#address-cells = <1>; |
| 214 |
#size-cells = <0>; |
| 215 |
|
| 216 |
ethphy7: ethernet-phy@7 { /* KSZ 9021 */ |
| 217 |
compatible = "ethernet-phy-ieee802.3-c22"; |
| 218 |
interrupt-parent = <&gpio1>; |
| 219 |
interrupts = <0 IRQ_TYPE_LEVEL_LOW>; |
| 220 |
pinctrl-0 = <&pinctrl_ethphy7>; |
| 221 |
pinctrl-names = "default"; |
| 222 |
reg = <7>; |
| 223 |
reset-assert-us = <1000>; |
| 224 |
reset-deassert-us = <1000>; |
| 225 |
reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; |
| 226 |
rxc-skew-ps = <3000>; |
| 227 |
rxd0-skew-ps = <0>; |
| 228 |
rxd1-skew-ps = <0>; |
| 229 |
rxd2-skew-ps = <0>; |
| 230 |
rxd3-skew-ps = <0>; |
| 231 |
rxdv-skew-ps = <0>; |
| 232 |
txc-skew-ps = <3000>; |
| 233 |
txd0-skew-ps = <0>; |
| 234 |
txd1-skew-ps = <0>; |
| 235 |
txd2-skew-ps = <0>; |
| 236 |
txd3-skew-ps = <0>; |
| 237 |
txen-skew-ps = <0>; |
| 238 |
}; |
| 239 |
}; |
| 240 |
}; |
| 241 |
|
| 242 |
&hdmi { |
| 243 |
ddc-i2c-bus = <&i2c2>; |
| 244 |
status = "okay"; |
| 245 |
}; |
| 246 |
|
| 247 |
&i2c2 { |
| 248 |
sgtl5000: codec@a { |
| 249 |
#sound-dai-cells = <0>; |
| 250 |
clocks = <&clk_ext_audio_codec>; |
| 251 |
compatible = "fsl,sgtl5000"; |
| 252 |
reg = <0x0a>; |
| 253 |
VDDA-supply = <®_3p3v>; |
| 254 |
VDDIO-supply = <&sw2_reg>; |
| 255 |
}; |
| 256 |
|
| 257 |
touchscreen@38 { |
| 258 |
compatible = "edt,edt-ft5406"; |
| 259 |
interrupt-parent = <&gpio4>; |
| 260 |
interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */ |
| 261 |
pinctrl-0 = <&pinctrl_dhcom_e>; |
| 262 |
pinctrl-names = "default"; |
| 263 |
reg = <0x38>; |
| 264 |
}; |
| 265 |
}; |
| 266 |
|
| 267 |
&ipu1_di0_disp0 { |
| 268 |
remote-endpoint = <&lcd_display_in>; |
| 269 |
}; |
| 270 |
|
| 271 |
&pcie { |
| 272 |
pinctrl-0 = <&pinctrl_pcie &pinctrl_dhcom_j>; |
| 273 |
reset-gpio = <&gpio6 14 GPIO_ACTIVE_LOW>; /* GPIO J */ |
| 274 |
status = "okay"; |
| 275 |
}; |
| 276 |
|
| 277 |
&pwm1 { |
| 278 |
status = "okay"; |
| 279 |
}; |
| 280 |
|
| 281 |
&ssi1 { |
| 282 |
status = "okay"; |
| 283 |
}; |
| 284 |
|
| 285 |
&usbh1 { |
| 286 |
disable-over-current; |
| 287 |
}; |
| 288 |
|
| 289 |
&usdhc2 { /* SD card */ |
| 290 |
status = "okay"; |
| 291 |
}; |
| 292 |
|
| 293 |
&iomuxc { |
| 294 |
pinctrl-0 = < |
| 295 |
/* |
| 296 |
* The following DHCOM GPIOs are used on this board. |
| 297 |
* Therefore, they have been removed from the list below. |
| 298 |
* A: key TA1 |
| 299 |
* B: key TA2 |
| 300 |
* C: key TA3 |
| 301 |
* D: key TA4 |
| 302 |
* E: touchscreen |
| 303 |
* F: led6 |
| 304 |
* G: backlight enable |
| 305 |
* H: led7 |
| 306 |
* I: led8 |
| 307 |
* J: PCIe reset |
| 308 |
*/ |
| 309 |
&pinctrl_hog_base |
| 310 |
&pinctrl_dhcom_k &pinctrl_dhcom_l |
| 311 |
&pinctrl_dhcom_m &pinctrl_dhcom_n &pinctrl_dhcom_o |
| 312 |
&pinctrl_dhcom_p &pinctrl_dhcom_q &pinctrl_dhcom_r |
| 313 |
&pinctrl_dhcom_s &pinctrl_dhcom_t &pinctrl_dhcom_u |
| 314 |
&pinctrl_dhcom_v &pinctrl_dhcom_w &pinctrl_dhcom_int |
| 315 |
>; |
| 316 |
pinctrl-names = "default"; |
| 317 |
|
| 318 |
pinctrl_audmux_ext: audmux-ext-grp { |
| 319 |
fsl,pins = < |
| 320 |
MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 |
| 321 |
MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 |
| 322 |
MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 |
| 323 |
MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 |
| 324 |
>; |
| 325 |
}; |
| 326 |
|
| 327 |
pinctrl_enet_1G: enet-1G-grp { |
| 328 |
fsl,pins = < |
| 329 |
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 |
| 330 |
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 |
| 331 |
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 |
| 332 |
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 |
| 333 |
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 |
| 334 |
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 |
| 335 |
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 |
| 336 |
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 |
| 337 |
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 |
| 338 |
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 |
| 339 |
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 |
| 340 |
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 |
| 341 |
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 |
| 342 |
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 |
| 343 |
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 |
| 344 |
>; |
| 345 |
}; |
| 346 |
|
| 347 |
pinctrl_ethphy7: ethphy7-grp { |
| 348 |
fsl,pins = < |
| 349 |
MX6QDL_PAD_EIM_D26__GPIO3_IO26 0xb1 /* WOL */ |
| 350 |
MX6QDL_PAD_EIM_D29__GPIO3_IO29 0xb0 /* Reset */ |
| 351 |
MX6QDL_PAD_GPIO_0__GPIO1_IO00 0xb1 /* Int */ |
| 352 |
>; |
| 353 |
}; |
| 354 |
}; |