| 1 |
/* |
| 2 |
* Copyright (C) 2013,2014 Russell King |
| 3 |
* |
| 4 |
* This file is dual-licensed: you can use it either under the terms |
| 5 |
* of the GPL or the X11 license, at your option. Note that this dual |
| 6 |
* licensing only applies to this file, and not this project as a |
| 7 |
* whole. |
| 8 |
* |
| 9 |
* a) This file is free software; you can redistribute it and/or |
| 10 |
* modify it under the terms of the GNU General Public License |
| 11 |
* version 2 as published by the Free Software Foundation. |
| 12 |
* |
| 13 |
* This file is distributed in the hope that it will be useful, |
| 14 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 16 |
* GNU General Public License for more details. |
| 17 |
* |
| 18 |
* Or, alternatively, |
| 19 |
* |
| 20 |
* b) Permission is hereby granted, free of charge, to any person |
| 21 |
* obtaining a copy of this software and associated documentation |
| 22 |
* files (the "Software"), to deal in the Software without |
| 23 |
* restriction, including without limitation the rights to use, |
| 24 |
* copy, modify, merge, publish, distribute, sublicense, and/or |
| 25 |
* sell copies of the Software, and to permit persons to whom the |
| 26 |
* Software is furnished to do so, subject to the following |
| 27 |
* conditions: |
| 28 |
* |
| 29 |
* The above copyright notice and this permission notice shall be |
| 30 |
* included in all copies or substantial portions of the Software. |
| 31 |
* |
| 32 |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 33 |
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| 34 |
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 35 |
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| 36 |
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| 37 |
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| 38 |
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| 39 |
* OTHER DEALINGS IN THE SOFTWARE. |
| 40 |
*/ |
| 41 |
#include <dt-bindings/gpio/gpio.h> |
| 42 |
/ { |
| 43 |
clk_brcm: brcm-clock { |
| 44 |
compatible = "gpio-gate-clock"; |
| 45 |
#clock-cells = <0>; |
| 46 |
pinctrl-names = "default"; |
| 47 |
pinctrl-0 = <&pinctrl_microsom_brcm_osc>; |
| 48 |
enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>; |
| 49 |
}; |
| 50 |
|
| 51 |
reg_brcm: brcm-reg { |
| 52 |
compatible = "regulator-fixed"; |
| 53 |
enable-active-high; |
| 54 |
gpio = <&gpio3 19 0>; |
| 55 |
pinctrl-names = "default"; |
| 56 |
pinctrl-0 = <&pinctrl_microsom_brcm_reg>; |
| 57 |
regulator-name = "brcm_reg"; |
| 58 |
regulator-min-microvolt = <3300000>; |
| 59 |
regulator-max-microvolt = <3300000>; |
| 60 |
startup-delay-us = <200000>; |
| 61 |
}; |
| 62 |
|
| 63 |
usdhc1_pwrseq: usdhc1_pwrseq { |
| 64 |
compatible = "mmc-pwrseq-simple"; |
| 65 |
reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>, |
| 66 |
<&gpio6 0 GPIO_ACTIVE_LOW>; |
| 67 |
clocks = <&clk_brcm>; |
| 68 |
clock-names = "ext_clock"; |
| 69 |
}; |
| 70 |
}; |
| 71 |
|
| 72 |
&iomuxc { |
| 73 |
pinctrl_microsom_brcm_bt: microsom-brcm-btgrp { |
| 74 |
fsl,pins = < |
| 75 |
MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x40013070 |
| 76 |
MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01 0x40013070 |
| 77 |
MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04 0x40013070 |
| 78 |
>; |
| 79 |
}; |
| 80 |
|
| 81 |
pinctrl_microsom_brcm_osc: microsom-brcm-oscgrp { |
| 82 |
fsl,pins = < |
| 83 |
MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x40013070 |
| 84 |
>; |
| 85 |
}; |
| 86 |
|
| 87 |
pinctrl_microsom_brcm_reg: microsom-brcm-reggrp { |
| 88 |
fsl,pins = < |
| 89 |
MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x40013070 |
| 90 |
>; |
| 91 |
}; |
| 92 |
|
| 93 |
pinctrl_microsom_brcm_wifi: microsom-brcm-wifigrp { |
| 94 |
fsl,pins = < |
| 95 |
MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K 0x1b0b0 |
| 96 |
MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x40013070 |
| 97 |
MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x40013070 |
| 98 |
MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x40013070 |
| 99 |
>; |
| 100 |
}; |
| 101 |
|
| 102 |
pinctrl_microsom_uart4: microsom-uart4grp { |
| 103 |
fsl,pins = < |
| 104 |
MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 |
| 105 |
MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 |
| 106 |
MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 |
| 107 |
MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 |
| 108 |
>; |
| 109 |
}; |
| 110 |
|
| 111 |
pinctrl_microsom_usdhc1: microsom-usdhc1grp { |
| 112 |
fsl,pins = < |
| 113 |
MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 |
| 114 |
MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 |
| 115 |
MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 |
| 116 |
MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 |
| 117 |
MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 |
| 118 |
MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 |
| 119 |
>; |
| 120 |
}; |
| 121 |
}; |
| 122 |
|
| 123 |
/* UART4 - Connected to optional BRCM Wifi/BT/FM */ |
| 124 |
&uart4 { |
| 125 |
pinctrl-names = "default"; |
| 126 |
pinctrl-0 = <&pinctrl_microsom_brcm_bt &pinctrl_microsom_uart4>; |
| 127 |
uart-has-rtscts; |
| 128 |
status = "okay"; |
| 129 |
}; |
| 130 |
|
| 131 |
/* USDHC1 - Connected to optional BRCM Wifi/BT/FM */ |
| 132 |
&usdhc1 { |
| 133 |
pinctrl-names = "default"; |
| 134 |
pinctrl-0 = <&pinctrl_microsom_brcm_wifi &pinctrl_microsom_usdhc1>; |
| 135 |
bus-width = <4>; |
| 136 |
mmc-pwrseq = <&usdhc1_pwrseq>; |
| 137 |
keep-power-in-suspend; |
| 138 |
no-1-8-v; |
| 139 |
non-removable; |
| 140 |
vmmc-supply = <®_brcm>; |
| 141 |
status = "okay"; |
| 142 |
}; |