| 1 |
// SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| 2 |
// |
| 3 |
// Copyright (C) 2018 emtrion GmbH |
| 4 |
// |
| 5 |
|
| 6 |
/ { |
| 7 |
aliases { |
| 8 |
boardid = &boardid; |
| 9 |
mmc0 = &usdhc3; |
| 10 |
mmc1 = &usdhc2; |
| 11 |
mmc2 = &usdhc1; |
| 12 |
mmc3 = &usdhc4; |
| 13 |
}; |
| 14 |
|
| 15 |
reg_wall_5p0: reg-wall5p0 { |
| 16 |
compatible = "regulator-fixed"; |
| 17 |
regulator-name = "Main-Supply"; |
| 18 |
regulator-min-microvolt = <5000000>; |
| 19 |
regulator-max-microvolt = <5000000>; |
| 20 |
regulator-always-on; |
| 21 |
regulator-boot-on; |
| 22 |
}; |
| 23 |
|
| 24 |
reg_base3p3: reg-base3p3 { |
| 25 |
compatible = "regulator-fixed"; |
| 26 |
vin-supply = <®_wall_5p0>; |
| 27 |
regulator-name = "3V3-avari"; |
| 28 |
regulator-min-microvolt = <3300000>; |
| 29 |
regulator-max-microvolt = <3300000>; |
| 30 |
regulator-always-on; |
| 31 |
regulator-boot-on; |
| 32 |
}; |
| 33 |
|
| 34 |
reg_base1p5: reg-base1p5 { |
| 35 |
compatible = "regulator-fixed"; |
| 36 |
vin-supply = <®_base3p3>; |
| 37 |
regulator-name = "1V5-avari"; |
| 38 |
regulator-min-microvolt = <1500000>; |
| 39 |
regulator-max-microvolt = <1500000>; |
| 40 |
regulator-always-on; |
| 41 |
regulator-boot-on; |
| 42 |
}; |
| 43 |
|
| 44 |
reg_usb_otg: reg-otgvbus { |
| 45 |
compatible = "regulator-fixed"; |
| 46 |
vin-supply = <®_wall_5p0>; |
| 47 |
regulator-name = "OTG_VBUS"; |
| 48 |
regulator-min-microvolt = <5000000>; |
| 49 |
regulator-max-microvolt = <5000000>; |
| 50 |
gpio = <&gpio1 8 GPIO_ACTIVE_LOW>; |
| 51 |
regulator-always-on; |
| 52 |
}; |
| 53 |
|
| 54 |
clk_codec: clock-codec { |
| 55 |
compatible = "fixed-clock"; |
| 56 |
#clock-cells = <0>; |
| 57 |
clock-frequency = <12000000>; |
| 58 |
}; |
| 59 |
|
| 60 |
sound { |
| 61 |
compatible = "fsl,imx-audio-sgtl5000"; |
| 62 |
model = "emCON-avari-sgtl5000"; |
| 63 |
ssi-controller = <&ssi2>; |
| 64 |
audio-codec = <&sgtl5000>; |
| 65 |
audio-routing = |
| 66 |
"Headphone Jack", "HP_OUT"; |
| 67 |
mux-int-port = <2>; |
| 68 |
mux-ext-port = <3>; |
| 69 |
}; |
| 70 |
}; |
| 71 |
|
| 72 |
&audmux { |
| 73 |
pinctrl-names = "default"; |
| 74 |
pinctrl-0 = <&pinctrl_audmux>; |
| 75 |
status = "okay"; |
| 76 |
}; |
| 77 |
|
| 78 |
&can1 { |
| 79 |
status = "okay"; |
| 80 |
}; |
| 81 |
|
| 82 |
&can2 { |
| 83 |
status = "okay"; |
| 84 |
}; |
| 85 |
|
| 86 |
&ecspi2 { |
| 87 |
status = "okay"; |
| 88 |
}; |
| 89 |
|
| 90 |
&hdmi { |
| 91 |
ddc-i2c-bus = <&i2c2>; |
| 92 |
status = "okay"; |
| 93 |
}; |
| 94 |
|
| 95 |
&i2c2 { |
| 96 |
status = "okay"; |
| 97 |
}; |
| 98 |
|
| 99 |
&i2c3 { |
| 100 |
clock-frequency = <100000>; |
| 101 |
pinctrl-names = "default"; |
| 102 |
pinctrl-0 = <&pinctrl_i2c3>; |
| 103 |
status = "okay"; |
| 104 |
|
| 105 |
sgtl5000: audio-codec@a { |
| 106 |
compatible = "fsl,sgtl5000"; |
| 107 |
reg = <0x0a>; |
| 108 |
#sound-dai-cells = <0>; |
| 109 |
clocks = <&clk_codec>; |
| 110 |
VDDA-supply = <®_base3p3>; |
| 111 |
VDDIO-supply = <®_base3p3>; |
| 112 |
}; |
| 113 |
|
| 114 |
captouch: touchscreen@38 { |
| 115 |
compatible = "edt,edt-ft5406"; |
| 116 |
reg = <0x38>; |
| 117 |
pinctrl-names = "default"; |
| 118 |
pinctrl-0 = <&pinctrl_irq_touch2 &pinctrl_emcon_gpio4>; |
| 119 |
interrupt-parent = <&gpio6>; |
| 120 |
interrupts = <31 IRQ_TYPE_EDGE_FALLING>; |
| 121 |
wake-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; |
| 122 |
wakeup-source; |
| 123 |
}; |
| 124 |
|
| 125 |
boardid: gpio@3a { |
| 126 |
compatible = "nxp,pca8574"; |
| 127 |
reg = <0x3a>; |
| 128 |
gpio-controller; |
| 129 |
#gpio-cells = <2>; |
| 130 |
}; |
| 131 |
}; |
| 132 |
|
| 133 |
&pcie { |
| 134 |
status = "okay"; |
| 135 |
}; |
| 136 |
|
| 137 |
&rgb_encoder { |
| 138 |
status = "okay"; |
| 139 |
}; |
| 140 |
|
| 141 |
&rgb_panel { |
| 142 |
compatible = "edt,etm0700g0bdh6"; |
| 143 |
status = "okay"; |
| 144 |
}; |
| 145 |
|
| 146 |
&ssi2 { |
| 147 |
status = "okay"; |
| 148 |
}; |
| 149 |
|
| 150 |
&uart2 { |
| 151 |
status = "okay"; |
| 152 |
uart-has-rtscts; |
| 153 |
}; |
| 154 |
|
| 155 |
&uart3 { |
| 156 |
status = "okay"; |
| 157 |
}; |
| 158 |
|
| 159 |
&uart4 { |
| 160 |
status = "okay"; |
| 161 |
}; |
| 162 |
|
| 163 |
&uart5 { |
| 164 |
status = "okay"; |
| 165 |
}; |
| 166 |
|
| 167 |
&usbh1 { |
| 168 |
status = "okay"; |
| 169 |
}; |
| 170 |
|
| 171 |
&usbotg { |
| 172 |
status = "okay"; |
| 173 |
}; |
| 174 |
|
| 175 |
&usdhc1 { |
| 176 |
status = "okay"; |
| 177 |
}; |