| 1 |
/* |
| 2 |
* Copyright (C) 2013,2014 Russell King |
| 3 |
* |
| 4 |
* This file is dual-licensed: you can use it either under the terms |
| 5 |
* of the GPL or the X11 license, at your option. Note that this dual |
| 6 |
* licensing only applies to this file, and not this project as a |
| 7 |
* whole. |
| 8 |
* |
| 9 |
* a) This file is free software; you can redistribute it and/or |
| 10 |
* modify it under the terms of the GNU General Public License |
| 11 |
* version 2 as published by the Free Software Foundation. |
| 12 |
* |
| 13 |
* This file is distributed in the hope that it will be useful, |
| 14 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 16 |
* GNU General Public License for more details. |
| 17 |
* |
| 18 |
* Or, alternatively, |
| 19 |
* |
| 20 |
* b) Permission is hereby granted, free of charge, to any person |
| 21 |
* obtaining a copy of this software and associated documentation |
| 22 |
* files (the "Software"), to deal in the Software without |
| 23 |
* restriction, including without limitation the rights to use, |
| 24 |
* copy, modify, merge, publish, distribute, sublicense, and/or |
| 25 |
* sell copies of the Software, and to permit persons to whom the |
| 26 |
* Software is furnished to do so, subject to the following |
| 27 |
* conditions: |
| 28 |
* |
| 29 |
* The above copyright notice and this permission notice shall be |
| 30 |
* included in all copies or substantial portions of the Software. |
| 31 |
* |
| 32 |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 33 |
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| 34 |
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 35 |
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| 36 |
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| 37 |
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| 38 |
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| 39 |
* OTHER DEALINGS IN THE SOFTWARE. |
| 40 |
*/ |
| 41 |
#include <dt-bindings/gpio/gpio.h> |
| 42 |
|
| 43 |
/ { |
| 44 |
nvcc_sd1: regulator-nvcc-sd1 { |
| 45 |
compatible = "regulator-fixed"; |
| 46 |
regulator-always-on; |
| 47 |
regulator-name = "nvcc_sd1"; |
| 48 |
regulator-min-microvolt = <1800000>; |
| 49 |
regulator-max-microvolt = <1800000>; |
| 50 |
vin-supply = <&vcc_3v3>; |
| 51 |
}; |
| 52 |
|
| 53 |
clk_ti_wifi: ti-wifi-clock { |
| 54 |
/* This is a hack around the kernel - using "fixed clock" |
| 55 |
* results in the "pinctrl" properties being ignored, and |
| 56 |
* the clock not being output. Instead, use a gated clock |
| 57 |
* and the unrouted WL_XTAL_PU gpio. |
| 58 |
*/ |
| 59 |
compatible = "gpio-gate-clock"; |
| 60 |
#clock-cells = <0>; |
| 61 |
clock-frequency = <32768>; |
| 62 |
pinctrl-names = "default"; |
| 63 |
pinctrl-0 = <&pinctrl_microsom_ti_clk>; |
| 64 |
enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>; |
| 65 |
}; |
| 66 |
|
| 67 |
pwrseq_ti_wifi: ti-wifi-pwrseq { |
| 68 |
compatible = "mmc-pwrseq-simple"; |
| 69 |
pinctrl-names = "default"; |
| 70 |
pinctrl-0 = <&pinctrl_microsom_ti_wifi_en>; |
| 71 |
reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; |
| 72 |
post-power-on-delay-ms = <200>; |
| 73 |
clocks = <&clk_ti_wifi>; |
| 74 |
clock-names = "ext_clock"; |
| 75 |
}; |
| 76 |
}; |
| 77 |
|
| 78 |
&iomuxc { |
| 79 |
pinctrl_microsom_ti_bt: microsom-ti-btgrp { |
| 80 |
fsl,pins = < |
| 81 |
/* BT_EN_SOC */ |
| 82 |
MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x40013070 |
| 83 |
>; |
| 84 |
}; |
| 85 |
|
| 86 |
pinctrl_microsom_ti_clk: microsom-ti-clkgrp { |
| 87 |
fsl,pins = < |
| 88 |
/* EXT_32K */ |
| 89 |
MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K 0x1b0b0 |
| 90 |
/* WL_XTAL_PU (unrouted) */ |
| 91 |
MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x40013070 |
| 92 |
>; |
| 93 |
}; |
| 94 |
|
| 95 |
pinctrl_microsom_ti_wifi_en: microsom-ti-wifi-engrp { |
| 96 |
fsl,pins = < |
| 97 |
/* WLAN_EN_SOC */ |
| 98 |
MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x40013070 |
| 99 |
>; |
| 100 |
}; |
| 101 |
|
| 102 |
pinctrl_microsom_ti_wifi_irq: microsom-ti-wifi-irqgrp { |
| 103 |
fsl,pins = < |
| 104 |
/* WLAN_IRQ */ |
| 105 |
MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04 0x40013070 |
| 106 |
>; |
| 107 |
}; |
| 108 |
|
| 109 |
pinctrl_microsom_uart4: microsom-uart4grp { |
| 110 |
fsl,pins = < |
| 111 |
MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 |
| 112 |
MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 |
| 113 |
MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 |
| 114 |
MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 |
| 115 |
>; |
| 116 |
}; |
| 117 |
|
| 118 |
pinctrl_microsom_usdhc1: microsom-usdhc1grp { |
| 119 |
fsl,pins = < |
| 120 |
MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 |
| 121 |
MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 |
| 122 |
MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 |
| 123 |
MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 |
| 124 |
MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 |
| 125 |
MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 |
| 126 |
>; |
| 127 |
}; |
| 128 |
}; |
| 129 |
|
| 130 |
/* UART4 - Connected to optional TI Wi-Fi/BT/FM */ |
| 131 |
&uart4 { |
| 132 |
pinctrl-names = "default"; |
| 133 |
pinctrl-0 = <&pinctrl_microsom_uart4>; |
| 134 |
uart-has-rtscts; |
| 135 |
status = "okay"; |
| 136 |
|
| 137 |
bluetooth { |
| 138 |
compatible = "ti,wl1837-st"; |
| 139 |
clocks = <&clk_ti_wifi>; |
| 140 |
clock-names = "ext_clock"; |
| 141 |
enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; |
| 142 |
pinctrl-names = "default"; |
| 143 |
pinctrl-0 = <&pinctrl_microsom_ti_bt>; |
| 144 |
}; |
| 145 |
}; |
| 146 |
|
| 147 |
/* USDHC1 - Connected to optional TI Wi-Fi/BT/FM */ |
| 148 |
&usdhc1 { |
| 149 |
pinctrl-names = "default"; |
| 150 |
pinctrl-0 = <&pinctrl_microsom_usdhc1>; |
| 151 |
bus-width = <4>; |
| 152 |
keep-power-in-suspend; |
| 153 |
mmc-pwrseq = <&pwrseq_ti_wifi>; |
| 154 |
cap-power-off-card; |
| 155 |
non-removable; |
| 156 |
vmmc-supply = <&vcc_3v3>; |
| 157 |
/* vqmmc-supply = <&nvcc_sd1>; - MMC layer doesn't like it! */ |
| 158 |
status = "okay"; |
| 159 |
#address-cells = <1>; |
| 160 |
#size-cells = <0>; |
| 161 |
|
| 162 |
wlcore@2 { |
| 163 |
compatible = "ti,wl1837"; |
| 164 |
reg = <2>; |
| 165 |
interrupts-extended = <&gpio6 4 IRQ_TYPE_LEVEL_HIGH>; |
| 166 |
pinctrl-names = "default"; |
| 167 |
pinctrl-0 = <&pinctrl_microsom_ti_wifi_irq>; |
| 168 |
}; |
| 169 |
}; |