| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR X11) |
| 2 |
/* |
| 3 |
* Copyright 2018 Icenowy Zheng <[email protected]> |
| 4 |
* Copyright 2018 Mesih Kilinc <[email protected]> |
| 5 |
*/ |
| 6 |
|
| 7 |
#include <dt-bindings/clock/suniv-ccu-f1c100s.h> |
| 8 |
#include <dt-bindings/reset/suniv-ccu-f1c100s.h> |
| 9 |
#include <dt-bindings/dma/sun4i-a10.h> |
| 10 |
|
| 11 |
/ { |
| 12 |
#address-cells = <1>; |
| 13 |
#size-cells = <1>; |
| 14 |
interrupt-parent = <&intc>; |
| 15 |
|
| 16 |
clocks { |
| 17 |
osc24M: clk-24M { |
| 18 |
#clock-cells = <0>; |
| 19 |
compatible = "fixed-clock"; |
| 20 |
clock-frequency = <24000000>; |
| 21 |
clock-output-names = "osc24M"; |
| 22 |
}; |
| 23 |
|
| 24 |
osc32k: clk-32k { |
| 25 |
#clock-cells = <0>; |
| 26 |
compatible = "fixed-clock"; |
| 27 |
clock-frequency = <32768>; |
| 28 |
clock-output-names = "osc32k"; |
| 29 |
}; |
| 30 |
}; |
| 31 |
|
| 32 |
cpus { |
| 33 |
#address-cells = <1>; |
| 34 |
#size-cells = <0>; |
| 35 |
|
| 36 |
cpu@0 { |
| 37 |
compatible = "arm,arm926ej-s"; |
| 38 |
device_type = "cpu"; |
| 39 |
reg = <0x0>; |
| 40 |
}; |
| 41 |
}; |
| 42 |
|
| 43 |
soc { |
| 44 |
compatible = "simple-bus"; |
| 45 |
#address-cells = <1>; |
| 46 |
#size-cells = <1>; |
| 47 |
ranges; |
| 48 |
|
| 49 |
sram-controller@1c00000 { |
| 50 |
compatible = "allwinner,suniv-f1c100s-system-control", |
| 51 |
"allwinner,sun4i-a10-system-control"; |
| 52 |
reg = <0x01c00000 0x30>; |
| 53 |
#address-cells = <1>; |
| 54 |
#size-cells = <1>; |
| 55 |
ranges; |
| 56 |
|
| 57 |
sram_d: sram@10000 { |
| 58 |
compatible = "mmio-sram"; |
| 59 |
reg = <0x00010000 0x1000>; |
| 60 |
#address-cells = <1>; |
| 61 |
#size-cells = <1>; |
| 62 |
ranges = <0 0x00010000 0x1000>; |
| 63 |
|
| 64 |
otg_sram: sram-section@0 { |
| 65 |
compatible = "allwinner,suniv-f1c100s-sram-d", |
| 66 |
"allwinner,sun4i-a10-sram-d"; |
| 67 |
reg = <0x0000 0x1000>; |
| 68 |
status = "disabled"; |
| 69 |
}; |
| 70 |
}; |
| 71 |
}; |
| 72 |
|
| 73 |
spi0: spi@1c05000 { |
| 74 |
compatible = "allwinner,suniv-f1c100s-spi", |
| 75 |
"allwinner,sun8i-h3-spi"; |
| 76 |
reg = <0x01c05000 0x1000>; |
| 77 |
interrupts = <10>; |
| 78 |
clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_BUS_SPI0>; |
| 79 |
clock-names = "ahb", "mod"; |
| 80 |
resets = <&ccu RST_BUS_SPI0>; |
| 81 |
status = "disabled"; |
| 82 |
num-cs = <1>; |
| 83 |
#address-cells = <1>; |
| 84 |
#size-cells = <0>; |
| 85 |
}; |
| 86 |
|
| 87 |
spi1: spi@1c06000 { |
| 88 |
compatible = "allwinner,suniv-f1c100s-spi", |
| 89 |
"allwinner,sun8i-h3-spi"; |
| 90 |
reg = <0x01c06000 0x1000>; |
| 91 |
interrupts = <11>; |
| 92 |
clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_BUS_SPI1>; |
| 93 |
clock-names = "ahb", "mod"; |
| 94 |
resets = <&ccu RST_BUS_SPI1>; |
| 95 |
status = "disabled"; |
| 96 |
num-cs = <1>; |
| 97 |
#address-cells = <1>; |
| 98 |
#size-cells = <0>; |
| 99 |
}; |
| 100 |
|
| 101 |
mmc0: mmc@1c0f000 { |
| 102 |
compatible = "allwinner,suniv-f1c100s-mmc", |
| 103 |
"allwinner,sun7i-a20-mmc"; |
| 104 |
reg = <0x01c0f000 0x1000>; |
| 105 |
clocks = <&ccu CLK_BUS_MMC0>, |
| 106 |
<&ccu CLK_MMC0>, |
| 107 |
<&ccu CLK_MMC0_OUTPUT>, |
| 108 |
<&ccu CLK_MMC0_SAMPLE>; |
| 109 |
clock-names = "ahb", "mmc", "output", "sample"; |
| 110 |
resets = <&ccu RST_BUS_MMC0>; |
| 111 |
reset-names = "ahb"; |
| 112 |
interrupts = <23>; |
| 113 |
pinctrl-names = "default"; |
| 114 |
pinctrl-0 = <&mmc0_pins>; |
| 115 |
status = "disabled"; |
| 116 |
#address-cells = <1>; |
| 117 |
#size-cells = <0>; |
| 118 |
}; |
| 119 |
|
| 120 |
mmc1: mmc@1c10000 { |
| 121 |
compatible = "allwinner,suniv-f1c100s-mmc", |
| 122 |
"allwinner,sun7i-a20-mmc"; |
| 123 |
reg = <0x01c10000 0x1000>; |
| 124 |
clocks = <&ccu CLK_BUS_MMC1>, |
| 125 |
<&ccu CLK_MMC1>, |
| 126 |
<&ccu CLK_MMC1_OUTPUT>, |
| 127 |
<&ccu CLK_MMC1_SAMPLE>; |
| 128 |
clock-names = "ahb", "mmc", "output", "sample"; |
| 129 |
resets = <&ccu RST_BUS_MMC1>; |
| 130 |
reset-names = "ahb"; |
| 131 |
interrupts = <24>; |
| 132 |
status = "disabled"; |
| 133 |
#address-cells = <1>; |
| 134 |
#size-cells = <0>; |
| 135 |
}; |
| 136 |
|
| 137 |
usb_otg: usb@1c13000 { |
| 138 |
compatible = "allwinner,suniv-f1c100s-musb"; |
| 139 |
reg = <0x01c13000 0x0400>; |
| 140 |
clocks = <&ccu CLK_BUS_OTG>; |
| 141 |
resets = <&ccu RST_BUS_OTG>; |
| 142 |
interrupts = <26>; |
| 143 |
interrupt-names = "mc"; |
| 144 |
phys = <&usbphy 0>; |
| 145 |
phy-names = "usb"; |
| 146 |
extcon = <&usbphy 0>; |
| 147 |
allwinner,sram = <&otg_sram 1>; |
| 148 |
status = "disabled"; |
| 149 |
}; |
| 150 |
|
| 151 |
usbphy: phy@1c13400 { |
| 152 |
compatible = "allwinner,suniv-f1c100s-usb-phy"; |
| 153 |
reg = <0x01c13400 0x10>; |
| 154 |
reg-names = "phy_ctrl"; |
| 155 |
clocks = <&ccu CLK_USB_PHY0>; |
| 156 |
clock-names = "usb0_phy"; |
| 157 |
resets = <&ccu RST_USB_PHY0>; |
| 158 |
reset-names = "usb0_reset"; |
| 159 |
#phy-cells = <1>; |
| 160 |
status = "disabled"; |
| 161 |
}; |
| 162 |
|
| 163 |
dma: dma-controller@1c02000 { |
| 164 |
compatible = "allwinner,suniv-f1c100s-dma"; |
| 165 |
reg = <0x01c02000 0x1000>; |
| 166 |
interrupts = <18>; |
| 167 |
clocks = <&ccu CLK_BUS_DMA>; |
| 168 |
resets = <&ccu RST_BUS_DMA>; |
| 169 |
#dma-cells = <2>; |
| 170 |
}; |
| 171 |
|
| 172 |
ccu: clock@1c20000 { |
| 173 |
compatible = "allwinner,suniv-f1c100s-ccu"; |
| 174 |
reg = <0x01c20000 0x400>; |
| 175 |
clocks = <&osc24M>, <&osc32k>; |
| 176 |
clock-names = "hosc", "losc"; |
| 177 |
#clock-cells = <1>; |
| 178 |
#reset-cells = <1>; |
| 179 |
}; |
| 180 |
|
| 181 |
intc: interrupt-controller@1c20400 { |
| 182 |
compatible = "allwinner,suniv-f1c100s-ic"; |
| 183 |
reg = <0x01c20400 0x400>; |
| 184 |
interrupt-controller; |
| 185 |
#interrupt-cells = <1>; |
| 186 |
}; |
| 187 |
|
| 188 |
pio: pinctrl@1c20800 { |
| 189 |
compatible = "allwinner,suniv-f1c100s-pinctrl"; |
| 190 |
reg = <0x01c20800 0x400>; |
| 191 |
interrupts = <38>, <39>, <40>; |
| 192 |
clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; |
| 193 |
clock-names = "apb", "hosc", "losc"; |
| 194 |
gpio-controller; |
| 195 |
interrupt-controller; |
| 196 |
#interrupt-cells = <3>; |
| 197 |
#gpio-cells = <3>; |
| 198 |
|
| 199 |
mmc0_pins: mmc0-pins { |
| 200 |
pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; |
| 201 |
function = "mmc0"; |
| 202 |
drive-strength = <30>; |
| 203 |
}; |
| 204 |
|
| 205 |
/omit-if-no-ref/ |
| 206 |
i2c0_pd_pins: i2c0-pd-pins { |
| 207 |
pins = "PD0", "PD12"; |
| 208 |
function = "i2c0"; |
| 209 |
}; |
| 210 |
|
| 211 |
spi0_pc_pins: spi0-pc-pins { |
| 212 |
pins = "PC0", "PC1", "PC2", "PC3"; |
| 213 |
function = "spi0"; |
| 214 |
}; |
| 215 |
|
| 216 |
uart0_pe_pins: uart0-pe-pins { |
| 217 |
pins = "PE0", "PE1"; |
| 218 |
function = "uart0"; |
| 219 |
}; |
| 220 |
|
| 221 |
/omit-if-no-ref/ |
| 222 |
uart1_pa_pins: uart1-pa-pins { |
| 223 |
pins = "PA2", "PA3"; |
| 224 |
function = "uart1"; |
| 225 |
}; |
| 226 |
}; |
| 227 |
|
| 228 |
i2c0: i2c@1c27000 { |
| 229 |
compatible = "allwinner,suniv-f1c100s-i2c", |
| 230 |
"allwinner,sun6i-a31-i2c"; |
| 231 |
reg = <0x01c27000 0x400>; |
| 232 |
interrupts = <7>; |
| 233 |
clocks = <&ccu CLK_BUS_I2C0>; |
| 234 |
resets = <&ccu RST_BUS_I2C0>; |
| 235 |
#address-cells = <1>; |
| 236 |
#size-cells = <0>; |
| 237 |
status = "disabled"; |
| 238 |
}; |
| 239 |
|
| 240 |
i2c1: i2c@1c27400 { |
| 241 |
compatible = "allwinner,suniv-f1c100s-i2c", |
| 242 |
"allwinner,sun6i-a31-i2c"; |
| 243 |
reg = <0x01c27400 0x400>; |
| 244 |
interrupts = <8>; |
| 245 |
clocks = <&ccu CLK_BUS_I2C1>; |
| 246 |
resets = <&ccu RST_BUS_I2C1>; |
| 247 |
#address-cells = <1>; |
| 248 |
#size-cells = <0>; |
| 249 |
status = "disabled"; |
| 250 |
}; |
| 251 |
|
| 252 |
i2c2: i2c@1c27800 { |
| 253 |
compatible = "allwinner,suniv-f1c100s-i2c", |
| 254 |
"allwinner,sun6i-a31-i2c"; |
| 255 |
reg = <0x01c27800 0x400>; |
| 256 |
interrupts = <9>; |
| 257 |
clocks = <&ccu CLK_BUS_I2C2>; |
| 258 |
resets = <&ccu RST_BUS_I2C2>; |
| 259 |
#address-cells = <1>; |
| 260 |
#size-cells = <0>; |
| 261 |
status = "disabled"; |
| 262 |
}; |
| 263 |
|
| 264 |
timer@1c20c00 { |
| 265 |
compatible = "allwinner,suniv-f1c100s-timer"; |
| 266 |
reg = <0x01c20c00 0x90>; |
| 267 |
interrupts = <13>, <14>, <15>; |
| 268 |
clocks = <&osc24M>; |
| 269 |
}; |
| 270 |
|
| 271 |
wdt: watchdog@1c20ca0 { |
| 272 |
compatible = "allwinner,suniv-f1c100s-wdt", |
| 273 |
"allwinner,sun6i-a31-wdt"; |
| 274 |
reg = <0x01c20ca0 0x20>; |
| 275 |
interrupts = <16>; |
| 276 |
clocks = <&osc32k>; |
| 277 |
}; |
| 278 |
|
| 279 |
pwm: pwm@1c21000 { |
| 280 |
compatible = "allwinner,suniv-f1c100s-pwm", |
| 281 |
"allwinner,sun7i-a20-pwm"; |
| 282 |
reg = <0x01c21000 0x400>; |
| 283 |
clocks = <&osc24M>; |
| 284 |
#pwm-cells = <3>; |
| 285 |
status = "disabled"; |
| 286 |
}; |
| 287 |
|
| 288 |
ir: ir@1c22c00 { |
| 289 |
compatible = "allwinner,suniv-f1c100s-ir", |
| 290 |
"allwinner,sun6i-a31-ir"; |
| 291 |
reg = <0x01c22c00 0x400>; |
| 292 |
clocks = <&ccu CLK_BUS_IR>, <&ccu CLK_IR>; |
| 293 |
clock-names = "apb", "ir"; |
| 294 |
resets = <&ccu RST_BUS_IR>; |
| 295 |
interrupts = <6>; |
| 296 |
status = "disabled"; |
| 297 |
}; |
| 298 |
|
| 299 |
lradc: lradc@1c23400 { |
| 300 |
compatible = "allwinner,suniv-f1c100s-lradc", |
| 301 |
"allwinner,sun8i-a83t-r-lradc"; |
| 302 |
reg = <0x01c23400 0x400>; |
| 303 |
interrupts = <22>; |
| 304 |
status = "disabled"; |
| 305 |
}; |
| 306 |
|
| 307 |
uart0: serial@1c25000 { |
| 308 |
compatible = "snps,dw-apb-uart"; |
| 309 |
reg = <0x01c25000 0x400>; |
| 310 |
interrupts = <1>; |
| 311 |
reg-shift = <2>; |
| 312 |
reg-io-width = <4>; |
| 313 |
clocks = <&ccu CLK_BUS_UART0>; |
| 314 |
resets = <&ccu RST_BUS_UART0>; |
| 315 |
status = "disabled"; |
| 316 |
}; |
| 317 |
|
| 318 |
uart1: serial@1c25400 { |
| 319 |
compatible = "snps,dw-apb-uart"; |
| 320 |
reg = <0x01c25400 0x400>; |
| 321 |
interrupts = <2>; |
| 322 |
reg-shift = <2>; |
| 323 |
reg-io-width = <4>; |
| 324 |
clocks = <&ccu CLK_BUS_UART1>; |
| 325 |
resets = <&ccu RST_BUS_UART1>; |
| 326 |
status = "disabled"; |
| 327 |
}; |
| 328 |
|
| 329 |
uart2: serial@1c25800 { |
| 330 |
compatible = "snps,dw-apb-uart"; |
| 331 |
reg = <0x01c25800 0x400>; |
| 332 |
interrupts = <3>; |
| 333 |
reg-shift = <2>; |
| 334 |
reg-io-width = <4>; |
| 335 |
clocks = <&ccu CLK_BUS_UART2>; |
| 336 |
resets = <&ccu RST_BUS_UART2>; |
| 337 |
status = "disabled"; |
| 338 |
}; |
| 339 |
|
| 340 |
codec: codec@1c23c00 { |
| 341 |
#sound-dai-cells = <0>; |
| 342 |
compatible = "allwinner,suniv-f1c100s-codec"; |
| 343 |
reg = <0x01c23c00 0x400>; |
| 344 |
interrupts = <21>; |
| 345 |
clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_CODEC>; |
| 346 |
clock-names = "apb", "codec"; |
| 347 |
dmas = <&dma SUN4I_DMA_NORMAL 12>, |
| 348 |
<&dma SUN4I_DMA_NORMAL 12>; |
| 349 |
dma-names = "rx", "tx"; |
| 350 |
resets = <&ccu RST_BUS_CODEC>; |
| 351 |
status = "disabled"; |
| 352 |
}; |
| 353 |
}; |
| 354 |
}; |