| 1 |
/* |
| 2 |
* Copyright 2012-2015 Maxime Ripard |
| 3 |
* |
| 4 |
* Maxime Ripard <[email protected]> |
| 5 |
* |
| 6 |
* This file is dual-licensed: you can use it either under the terms |
| 7 |
* of the GPL or the X11 license, at your option. Note that this dual |
| 8 |
* licensing only applies to this file, and not this project as a |
| 9 |
* whole. |
| 10 |
* |
| 11 |
* a) This library is free software; you can redistribute it and/or |
| 12 |
* modify it under the terms of the GNU General Public License as |
| 13 |
* published by the Free Software Foundation; either version 2 of the |
| 14 |
* License, or (at your option) any later version. |
| 15 |
* |
| 16 |
* This library is distributed in the hope that it will be useful, |
| 17 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 18 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 19 |
* GNU General Public License for more details. |
| 20 |
* |
| 21 |
* Or, alternatively, |
| 22 |
* |
| 23 |
* b) Permission is hereby granted, free of charge, to any person |
| 24 |
* obtaining a copy of this software and associated documentation |
| 25 |
* files (the "Software"), to deal in the Software without |
| 26 |
* restriction, including without limitation the rights to use, |
| 27 |
* copy, modify, merge, publish, distribute, sublicense, and/or |
| 28 |
* sell copies of the Software, and to permit persons to whom the |
| 29 |
* Software is furnished to do so, subject to the following |
| 30 |
* conditions: |
| 31 |
* |
| 32 |
* The above copyright notice and this permission notice shall be |
| 33 |
* included in all copies or substantial portions of the Software. |
| 34 |
* |
| 35 |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 36 |
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| 37 |
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 38 |
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| 39 |
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| 40 |
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| 41 |
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| 42 |
* OTHER DEALINGS IN THE SOFTWARE. |
| 43 |
*/ |
| 44 |
|
| 45 |
#include <dt-bindings/clock/sun5i-ccu.h> |
| 46 |
#include <dt-bindings/dma/sun4i-a10.h> |
| 47 |
#include <dt-bindings/reset/sun5i-ccu.h> |
| 48 |
|
| 49 |
/ { |
| 50 |
interrupt-parent = <&intc>; |
| 51 |
#address-cells = <1>; |
| 52 |
#size-cells = <1>; |
| 53 |
|
| 54 |
cpus { |
| 55 |
#address-cells = <1>; |
| 56 |
#size-cells = <0>; |
| 57 |
|
| 58 |
cpu0: cpu@0 { |
| 59 |
device_type = "cpu"; |
| 60 |
compatible = "arm,cortex-a8"; |
| 61 |
reg = <0x0>; |
| 62 |
clocks = <&ccu CLK_CPU>; |
| 63 |
}; |
| 64 |
}; |
| 65 |
|
| 66 |
chosen { |
| 67 |
#address-cells = <1>; |
| 68 |
#size-cells = <1>; |
| 69 |
ranges; |
| 70 |
|
| 71 |
framebuffer-lcd0 { |
| 72 |
compatible = "allwinner,simple-framebuffer", |
| 73 |
"simple-framebuffer"; |
| 74 |
allwinner,pipeline = "de_be0-lcd0"; |
| 75 |
clocks = <&ccu CLK_AHB_LCD>, <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>, |
| 76 |
<&ccu CLK_TCON_CH0>, <&ccu CLK_DRAM_DE_BE>; |
| 77 |
status = "disabled"; |
| 78 |
}; |
| 79 |
|
| 80 |
framebuffer-lcd0-tve0 { |
| 81 |
compatible = "allwinner,simple-framebuffer", |
| 82 |
"simple-framebuffer"; |
| 83 |
allwinner,pipeline = "de_be0-lcd0-tve0"; |
| 84 |
clocks = <&ccu CLK_AHB_TVE>, <&ccu CLK_AHB_LCD>, |
| 85 |
<&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>, |
| 86 |
<&ccu CLK_TCON_CH1>, <&ccu CLK_DRAM_DE_BE>; |
| 87 |
status = "disabled"; |
| 88 |
}; |
| 89 |
}; |
| 90 |
|
| 91 |
clocks { |
| 92 |
#address-cells = <1>; |
| 93 |
#size-cells = <1>; |
| 94 |
ranges; |
| 95 |
|
| 96 |
osc24M: clk-24M { |
| 97 |
#clock-cells = <0>; |
| 98 |
compatible = "fixed-clock"; |
| 99 |
clock-frequency = <24000000>; |
| 100 |
clock-output-names = "osc24M"; |
| 101 |
}; |
| 102 |
|
| 103 |
osc32k: clk-32k { |
| 104 |
#clock-cells = <0>; |
| 105 |
compatible = "fixed-clock"; |
| 106 |
clock-frequency = <32768>; |
| 107 |
clock-output-names = "osc32k"; |
| 108 |
}; |
| 109 |
}; |
| 110 |
|
| 111 |
reserved-memory { |
| 112 |
#address-cells = <1>; |
| 113 |
#size-cells = <1>; |
| 114 |
ranges; |
| 115 |
|
| 116 |
/* Address must be kept in the lower 256 MiBs of DRAM for VE. */ |
| 117 |
default-pool { |
| 118 |
compatible = "shared-dma-pool"; |
| 119 |
size = <0x6000000>; |
| 120 |
alloc-ranges = <0x40000000 0x10000000>; |
| 121 |
reusable; |
| 122 |
linux,cma-default; |
| 123 |
}; |
| 124 |
}; |
| 125 |
|
| 126 |
soc { |
| 127 |
compatible = "simple-bus"; |
| 128 |
#address-cells = <1>; |
| 129 |
#size-cells = <1>; |
| 130 |
dma-ranges; |
| 131 |
ranges; |
| 132 |
|
| 133 |
system-control@1c00000 { |
| 134 |
compatible = "allwinner,sun5i-a13-system-control"; |
| 135 |
reg = <0x01c00000 0x30>; |
| 136 |
#address-cells = <1>; |
| 137 |
#size-cells = <1>; |
| 138 |
ranges; |
| 139 |
|
| 140 |
sram_a: sram@0 { |
| 141 |
compatible = "mmio-sram"; |
| 142 |
reg = <0x00000000 0xc000>; |
| 143 |
#address-cells = <1>; |
| 144 |
#size-cells = <1>; |
| 145 |
ranges = <0 0x00000000 0xc000>; |
| 146 |
|
| 147 |
emac_sram: sram-section@8000 { |
| 148 |
compatible = "allwinner,sun5i-a13-sram-a3-a4", |
| 149 |
"allwinner,sun4i-a10-sram-a3-a4"; |
| 150 |
reg = <0x8000 0x4000>; |
| 151 |
status = "disabled"; |
| 152 |
}; |
| 153 |
}; |
| 154 |
|
| 155 |
sram_d: sram@10000 { |
| 156 |
compatible = "mmio-sram"; |
| 157 |
reg = <0x00010000 0x1000>; |
| 158 |
#address-cells = <1>; |
| 159 |
#size-cells = <1>; |
| 160 |
ranges = <0 0x00010000 0x1000>; |
| 161 |
|
| 162 |
otg_sram: sram-section@0 { |
| 163 |
compatible = "allwinner,sun5i-a13-sram-d", |
| 164 |
"allwinner,sun4i-a10-sram-d"; |
| 165 |
reg = <0x0000 0x1000>; |
| 166 |
status = "disabled"; |
| 167 |
}; |
| 168 |
}; |
| 169 |
|
| 170 |
sram_c: sram@1d00000 { |
| 171 |
compatible = "mmio-sram"; |
| 172 |
reg = <0x01d00000 0xd0000>; |
| 173 |
#address-cells = <1>; |
| 174 |
#size-cells = <1>; |
| 175 |
ranges = <0 0x01d00000 0xd0000>; |
| 176 |
|
| 177 |
ve_sram: sram-section@0 { |
| 178 |
compatible = "allwinner,sun5i-a13-sram-c1", |
| 179 |
"allwinner,sun4i-a10-sram-c1"; |
| 180 |
reg = <0x000000 0x80000>; |
| 181 |
}; |
| 182 |
}; |
| 183 |
}; |
| 184 |
|
| 185 |
mbus: dram-controller@1c01000 { |
| 186 |
compatible = "allwinner,sun5i-a13-mbus"; |
| 187 |
reg = <0x01c01000 0x1000>; |
| 188 |
clocks = <&ccu CLK_MBUS>; |
| 189 |
#address-cells = <1>; |
| 190 |
#size-cells = <1>; |
| 191 |
dma-ranges = <0x00000000 0x40000000 0x20000000>; |
| 192 |
#interconnect-cells = <1>; |
| 193 |
}; |
| 194 |
|
| 195 |
dma: dma-controller@1c02000 { |
| 196 |
compatible = "allwinner,sun4i-a10-dma"; |
| 197 |
reg = <0x01c02000 0x1000>; |
| 198 |
interrupts = <27>; |
| 199 |
clocks = <&ccu CLK_AHB_DMA>; |
| 200 |
#dma-cells = <2>; |
| 201 |
}; |
| 202 |
|
| 203 |
nfc: nand-controller@1c03000 { |
| 204 |
compatible = "allwinner,sun4i-a10-nand"; |
| 205 |
reg = <0x01c03000 0x1000>; |
| 206 |
interrupts = <37>; |
| 207 |
clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>; |
| 208 |
clock-names = "ahb", "mod"; |
| 209 |
dmas = <&dma SUN4I_DMA_DEDICATED 3>; |
| 210 |
dma-names = "rxtx"; |
| 211 |
status = "disabled"; |
| 212 |
#address-cells = <1>; |
| 213 |
#size-cells = <0>; |
| 214 |
}; |
| 215 |
|
| 216 |
spi0: spi@1c05000 { |
| 217 |
compatible = "allwinner,sun4i-a10-spi"; |
| 218 |
reg = <0x01c05000 0x1000>; |
| 219 |
interrupts = <10>; |
| 220 |
clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>; |
| 221 |
clock-names = "ahb", "mod"; |
| 222 |
dmas = <&dma SUN4I_DMA_DEDICATED 27>, |
| 223 |
<&dma SUN4I_DMA_DEDICATED 26>; |
| 224 |
dma-names = "rx", "tx"; |
| 225 |
status = "disabled"; |
| 226 |
#address-cells = <1>; |
| 227 |
#size-cells = <0>; |
| 228 |
}; |
| 229 |
|
| 230 |
spi1: spi@1c06000 { |
| 231 |
compatible = "allwinner,sun4i-a10-spi"; |
| 232 |
reg = <0x01c06000 0x1000>; |
| 233 |
interrupts = <11>; |
| 234 |
clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>; |
| 235 |
clock-names = "ahb", "mod"; |
| 236 |
dmas = <&dma SUN4I_DMA_DEDICATED 9>, |
| 237 |
<&dma SUN4I_DMA_DEDICATED 8>; |
| 238 |
dma-names = "rx", "tx"; |
| 239 |
status = "disabled"; |
| 240 |
#address-cells = <1>; |
| 241 |
#size-cells = <0>; |
| 242 |
}; |
| 243 |
|
| 244 |
tve0: tv-encoder@1c0a000 { |
| 245 |
compatible = "allwinner,sun4i-a10-tv-encoder"; |
| 246 |
reg = <0x01c0a000 0x1000>; |
| 247 |
clocks = <&ccu CLK_AHB_TVE>; |
| 248 |
resets = <&ccu RST_TVE>; |
| 249 |
status = "disabled"; |
| 250 |
|
| 251 |
port { |
| 252 |
|
| 253 |
tve0_in_tcon0: endpoint { |
| 254 |
remote-endpoint = <&tcon0_out_tve0>; |
| 255 |
}; |
| 256 |
}; |
| 257 |
}; |
| 258 |
|
| 259 |
emac: ethernet@1c0b000 { |
| 260 |
compatible = "allwinner,sun4i-a10-emac"; |
| 261 |
reg = <0x01c0b000 0x1000>; |
| 262 |
interrupts = <55>; |
| 263 |
clocks = <&ccu CLK_AHB_EMAC>; |
| 264 |
allwinner,sram = <&emac_sram 1>; |
| 265 |
status = "disabled"; |
| 266 |
}; |
| 267 |
|
| 268 |
mdio: mdio@1c0b080 { |
| 269 |
compatible = "allwinner,sun4i-a10-mdio"; |
| 270 |
reg = <0x01c0b080 0x14>; |
| 271 |
status = "disabled"; |
| 272 |
#address-cells = <1>; |
| 273 |
#size-cells = <0>; |
| 274 |
}; |
| 275 |
|
| 276 |
tcon0: lcd-controller@1c0c000 { |
| 277 |
compatible = "allwinner,sun5i-a13-tcon"; |
| 278 |
reg = <0x01c0c000 0x1000>; |
| 279 |
interrupts = <44>; |
| 280 |
dmas = <&dma SUN4I_DMA_DEDICATED 14>; |
| 281 |
resets = <&ccu RST_LCD>; |
| 282 |
reset-names = "lcd"; |
| 283 |
clocks = <&ccu CLK_AHB_LCD>, |
| 284 |
<&ccu CLK_TCON_CH0>, |
| 285 |
<&ccu CLK_TCON_CH1>; |
| 286 |
clock-names = "ahb", |
| 287 |
"tcon-ch0", |
| 288 |
"tcon-ch1"; |
| 289 |
clock-output-names = "tcon-data-clock"; |
| 290 |
#clock-cells = <0>; |
| 291 |
status = "disabled"; |
| 292 |
|
| 293 |
ports { |
| 294 |
#address-cells = <1>; |
| 295 |
#size-cells = <0>; |
| 296 |
|
| 297 |
tcon0_in: port@0 { |
| 298 |
reg = <0>; |
| 299 |
|
| 300 |
tcon0_in_be0: endpoint { |
| 301 |
remote-endpoint = <&be0_out_tcon0>; |
| 302 |
}; |
| 303 |
}; |
| 304 |
|
| 305 |
tcon0_out: port@1 { |
| 306 |
#address-cells = <1>; |
| 307 |
#size-cells = <0>; |
| 308 |
reg = <1>; |
| 309 |
|
| 310 |
tcon0_out_tve0: endpoint@1 { |
| 311 |
reg = <1>; |
| 312 |
remote-endpoint = <&tve0_in_tcon0>; |
| 313 |
allwinner,tcon-channel = <1>; |
| 314 |
}; |
| 315 |
}; |
| 316 |
}; |
| 317 |
}; |
| 318 |
|
| 319 |
video-codec@1c0e000 { |
| 320 |
compatible = "allwinner,sun5i-a13-video-engine"; |
| 321 |
reg = <0x01c0e000 0x1000>; |
| 322 |
clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>, |
| 323 |
<&ccu CLK_DRAM_VE>; |
| 324 |
clock-names = "ahb", "mod", "ram"; |
| 325 |
resets = <&ccu RST_VE>; |
| 326 |
interrupts = <53>; |
| 327 |
allwinner,sram = <&ve_sram 1>; |
| 328 |
}; |
| 329 |
|
| 330 |
mmc0: mmc@1c0f000 { |
| 331 |
compatible = "allwinner,sun5i-a13-mmc"; |
| 332 |
reg = <0x01c0f000 0x1000>; |
| 333 |
clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>; |
| 334 |
clock-names = "ahb", "mmc"; |
| 335 |
interrupts = <32>; |
| 336 |
pinctrl-names = "default"; |
| 337 |
pinctrl-0 = <&mmc0_pins>; |
| 338 |
status = "disabled"; |
| 339 |
#address-cells = <1>; |
| 340 |
#size-cells = <0>; |
| 341 |
}; |
| 342 |
|
| 343 |
mmc1: mmc@1c10000 { |
| 344 |
compatible = "allwinner,sun5i-a13-mmc"; |
| 345 |
reg = <0x01c10000 0x1000>; |
| 346 |
clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>; |
| 347 |
clock-names = "ahb", "mmc"; |
| 348 |
interrupts = <33>; |
| 349 |
status = "disabled"; |
| 350 |
#address-cells = <1>; |
| 351 |
#size-cells = <0>; |
| 352 |
}; |
| 353 |
|
| 354 |
mmc2: mmc@1c11000 { |
| 355 |
compatible = "allwinner,sun5i-a13-mmc"; |
| 356 |
reg = <0x01c11000 0x1000>; |
| 357 |
clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>; |
| 358 |
clock-names = "ahb", "mmc"; |
| 359 |
interrupts = <34>; |
| 360 |
status = "disabled"; |
| 361 |
#address-cells = <1>; |
| 362 |
#size-cells = <0>; |
| 363 |
}; |
| 364 |
|
| 365 |
usb_otg: usb@1c13000 { |
| 366 |
compatible = "allwinner,sun4i-a10-musb"; |
| 367 |
reg = <0x01c13000 0x0400>; |
| 368 |
clocks = <&ccu CLK_AHB_OTG>; |
| 369 |
interrupts = <38>; |
| 370 |
interrupt-names = "mc"; |
| 371 |
phys = <&usbphy 0>; |
| 372 |
phy-names = "usb"; |
| 373 |
extcon = <&usbphy 0>; |
| 374 |
allwinner,sram = <&otg_sram 1>; |
| 375 |
dr_mode = "otg"; |
| 376 |
status = "disabled"; |
| 377 |
}; |
| 378 |
|
| 379 |
usbphy: phy@1c13400 { |
| 380 |
#phy-cells = <1>; |
| 381 |
compatible = "allwinner,sun5i-a13-usb-phy"; |
| 382 |
reg = <0x01c13400 0x10>, <0x01c14800 0x4>; |
| 383 |
reg-names = "phy_ctrl", "pmu1"; |
| 384 |
clocks = <&ccu CLK_USB_PHY0>; |
| 385 |
clock-names = "usb_phy"; |
| 386 |
resets = <&ccu RST_USB_PHY0>, <&ccu RST_USB_PHY1>; |
| 387 |
reset-names = "usb0_reset", "usb1_reset"; |
| 388 |
status = "disabled"; |
| 389 |
}; |
| 390 |
|
| 391 |
ehci0: usb@1c14000 { |
| 392 |
compatible = "allwinner,sun5i-a13-ehci", "generic-ehci"; |
| 393 |
reg = <0x01c14000 0x100>; |
| 394 |
interrupts = <39>; |
| 395 |
clocks = <&ccu CLK_AHB_EHCI>; |
| 396 |
phys = <&usbphy 1>; |
| 397 |
phy-names = "usb"; |
| 398 |
status = "disabled"; |
| 399 |
}; |
| 400 |
|
| 401 |
ohci0: usb@1c14400 { |
| 402 |
compatible = "allwinner,sun5i-a13-ohci", "generic-ohci"; |
| 403 |
reg = <0x01c14400 0x100>; |
| 404 |
interrupts = <40>; |
| 405 |
clocks = <&ccu CLK_USB_OHCI>, <&ccu CLK_AHB_OHCI>; |
| 406 |
phys = <&usbphy 1>; |
| 407 |
phy-names = "usb"; |
| 408 |
status = "disabled"; |
| 409 |
}; |
| 410 |
|
| 411 |
crypto: crypto-engine@1c15000 { |
| 412 |
compatible = "allwinner,sun5i-a13-crypto", |
| 413 |
"allwinner,sun4i-a10-crypto"; |
| 414 |
reg = <0x01c15000 0x1000>; |
| 415 |
interrupts = <54>; |
| 416 |
clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>; |
| 417 |
clock-names = "ahb", "mod"; |
| 418 |
}; |
| 419 |
|
| 420 |
spi2: spi@1c17000 { |
| 421 |
compatible = "allwinner,sun4i-a10-spi"; |
| 422 |
reg = <0x01c17000 0x1000>; |
| 423 |
interrupts = <12>; |
| 424 |
clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>; |
| 425 |
clock-names = "ahb", "mod"; |
| 426 |
dmas = <&dma SUN4I_DMA_DEDICATED 29>, |
| 427 |
<&dma SUN4I_DMA_DEDICATED 28>; |
| 428 |
dma-names = "rx", "tx"; |
| 429 |
status = "disabled"; |
| 430 |
#address-cells = <1>; |
| 431 |
#size-cells = <0>; |
| 432 |
}; |
| 433 |
|
| 434 |
ccu: clock@1c20000 { |
| 435 |
reg = <0x01c20000 0x400>; |
| 436 |
clocks = <&osc24M>, <&osc32k>; |
| 437 |
clock-names = "hosc", "losc"; |
| 438 |
#clock-cells = <1>; |
| 439 |
#reset-cells = <1>; |
| 440 |
}; |
| 441 |
|
| 442 |
intc: interrupt-controller@1c20400 { |
| 443 |
compatible = "allwinner,sun4i-a10-ic"; |
| 444 |
reg = <0x01c20400 0x400>; |
| 445 |
interrupt-controller; |
| 446 |
#interrupt-cells = <1>; |
| 447 |
}; |
| 448 |
|
| 449 |
pio: pinctrl@1c20800 { |
| 450 |
reg = <0x01c20800 0x400>; |
| 451 |
interrupts = <28>; |
| 452 |
clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>; |
| 453 |
clock-names = "apb", "hosc", "losc"; |
| 454 |
gpio-controller; |
| 455 |
interrupt-controller; |
| 456 |
#interrupt-cells = <3>; |
| 457 |
#gpio-cells = <3>; |
| 458 |
|
| 459 |
emac_pd_pins: emac-pd-pins { |
| 460 |
pins = "PD6", "PD7", "PD10", |
| 461 |
"PD11", "PD12", "PD13", "PD14", |
| 462 |
"PD15", "PD18", "PD19", "PD20", |
| 463 |
"PD21", "PD22", "PD23", "PD24", |
| 464 |
"PD25", "PD26", "PD27"; |
| 465 |
function = "emac"; |
| 466 |
}; |
| 467 |
|
| 468 |
i2c0_pins: i2c0-pins { |
| 469 |
pins = "PB0", "PB1"; |
| 470 |
function = "i2c0"; |
| 471 |
}; |
| 472 |
|
| 473 |
i2c1_pins: i2c1-pins { |
| 474 |
pins = "PB15", "PB16"; |
| 475 |
function = "i2c1"; |
| 476 |
}; |
| 477 |
|
| 478 |
i2c2_pins: i2c2-pins { |
| 479 |
pins = "PB17", "PB18"; |
| 480 |
function = "i2c2"; |
| 481 |
}; |
| 482 |
|
| 483 |
ir0_rx_pin: ir0-rx-pin { |
| 484 |
pins = "PB4"; |
| 485 |
function = "ir0"; |
| 486 |
}; |
| 487 |
|
| 488 |
lcd_rgb565_pins: lcd-rgb565-pins { |
| 489 |
pins = "PD3", "PD4", "PD5", "PD6", "PD7", |
| 490 |
"PD10", "PD11", "PD12", "PD13", "PD14", "PD15", |
| 491 |
"PD19", "PD20", "PD21", "PD22", "PD23", |
| 492 |
"PD24", "PD25", "PD26", "PD27"; |
| 493 |
function = "lcd0"; |
| 494 |
}; |
| 495 |
|
| 496 |
lcd_rgb666_pins: lcd-rgb666-pins { |
| 497 |
pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", |
| 498 |
"PD10", "PD11", "PD12", "PD13", "PD14", "PD15", |
| 499 |
"PD18", "PD19", "PD20", "PD21", "PD22", "PD23", |
| 500 |
"PD24", "PD25", "PD26", "PD27"; |
| 501 |
function = "lcd0"; |
| 502 |
}; |
| 503 |
|
| 504 |
mmc0_pins: mmc0-pins { |
| 505 |
pins = "PF0", "PF1", "PF2", "PF3", |
| 506 |
"PF4", "PF5"; |
| 507 |
function = "mmc0"; |
| 508 |
drive-strength = <30>; |
| 509 |
bias-pull-up; |
| 510 |
}; |
| 511 |
|
| 512 |
mmc2_4bit_pc_pins: mmc2-4bit-pc-pins { |
| 513 |
pins = "PC6", "PC7", "PC8", "PC9", |
| 514 |
"PC10", "PC11"; |
| 515 |
function = "mmc2"; |
| 516 |
drive-strength = <30>; |
| 517 |
bias-pull-up; |
| 518 |
}; |
| 519 |
|
| 520 |
/omit-if-no-ref/ |
| 521 |
mmc2_4bit_pe_pins: mmc2-4bit-pe-pins { |
| 522 |
pins = "PE4", "PE5", "PE6", "PE7", |
| 523 |
"PE8", "PE9"; |
| 524 |
function = "mmc2"; |
| 525 |
drive-strength = <30>; |
| 526 |
bias-pull-up; |
| 527 |
}; |
| 528 |
|
| 529 |
mmc2_8bit_pins: mmc2-8bit-pins { |
| 530 |
pins = "PC6", "PC7", "PC8", "PC9", |
| 531 |
"PC10", "PC11", "PC12", "PC13", |
| 532 |
"PC14", "PC15"; |
| 533 |
function = "mmc2"; |
| 534 |
drive-strength = <30>; |
| 535 |
bias-pull-up; |
| 536 |
}; |
| 537 |
|
| 538 |
nand_pins: nand-pins { |
| 539 |
pins = "PC0", "PC1", "PC2", |
| 540 |
"PC5", "PC8", "PC9", "PC10", |
| 541 |
"PC11", "PC12", "PC13", "PC14", |
| 542 |
"PC15"; |
| 543 |
function = "nand0"; |
| 544 |
}; |
| 545 |
|
| 546 |
nand_cs0_pin: nand-cs0-pin { |
| 547 |
pins = "PC4"; |
| 548 |
function = "nand0"; |
| 549 |
}; |
| 550 |
|
| 551 |
nand_rb0_pin: nand-rb0-pin { |
| 552 |
pins = "PC6"; |
| 553 |
function = "nand0"; |
| 554 |
}; |
| 555 |
|
| 556 |
pwm0_pin: pwm0-pin { |
| 557 |
pins = "PB2"; |
| 558 |
function = "pwm"; |
| 559 |
}; |
| 560 |
|
| 561 |
spi2_pe_pins: spi2-pe-pins { |
| 562 |
pins = "PE1", "PE2", "PE3"; |
| 563 |
function = "spi2"; |
| 564 |
}; |
| 565 |
|
| 566 |
spi2_cs0_pe_pin: spi2-cs0-pe-pin { |
| 567 |
pins = "PE0"; |
| 568 |
function = "spi2"; |
| 569 |
}; |
| 570 |
|
| 571 |
uart1_pe_pins: uart1-pe-pins { |
| 572 |
pins = "PE10", "PE11"; |
| 573 |
function = "uart1"; |
| 574 |
}; |
| 575 |
|
| 576 |
uart1_pg_pins: uart1-pg-pins { |
| 577 |
pins = "PG3", "PG4"; |
| 578 |
function = "uart1"; |
| 579 |
}; |
| 580 |
|
| 581 |
uart2_pd_pins: uart2-pd-pins { |
| 582 |
pins = "PD2", "PD3"; |
| 583 |
function = "uart2"; |
| 584 |
}; |
| 585 |
|
| 586 |
uart2_cts_rts_pd_pins: uart2-cts-rts-pd-pins { |
| 587 |
pins = "PD4", "PD5"; |
| 588 |
function = "uart2"; |
| 589 |
}; |
| 590 |
|
| 591 |
uart3_pg_pins: uart3-pg-pins { |
| 592 |
pins = "PG9", "PG10"; |
| 593 |
function = "uart3"; |
| 594 |
}; |
| 595 |
|
| 596 |
uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins { |
| 597 |
pins = "PG11", "PG12"; |
| 598 |
function = "uart3"; |
| 599 |
}; |
| 600 |
}; |
| 601 |
|
| 602 |
timer@1c20c00 { |
| 603 |
compatible = "allwinner,sun4i-a10-timer"; |
| 604 |
reg = <0x01c20c00 0x90>; |
| 605 |
interrupts = <22>, |
| 606 |
<23>, |
| 607 |
<24>, |
| 608 |
<25>, |
| 609 |
<67>, |
| 610 |
<68>; |
| 611 |
clocks = <&ccu CLK_HOSC>; |
| 612 |
}; |
| 613 |
|
| 614 |
wdt: watchdog@1c20c90 { |
| 615 |
compatible = "allwinner,sun4i-a10-wdt"; |
| 616 |
reg = <0x01c20c90 0x10>; |
| 617 |
interrupts = <24>; |
| 618 |
clocks = <&osc24M>; |
| 619 |
}; |
| 620 |
|
| 621 |
ir0: ir@1c21800 { |
| 622 |
compatible = "allwinner,sun4i-a10-ir"; |
| 623 |
clocks = <&ccu CLK_APB0_IR>, <&ccu CLK_IR>; |
| 624 |
clock-names = "apb", "ir"; |
| 625 |
interrupts = <5>; |
| 626 |
reg = <0x01c21800 0x40>; |
| 627 |
status = "disabled"; |
| 628 |
}; |
| 629 |
|
| 630 |
lradc: lradc@1c22800 { |
| 631 |
compatible = "allwinner,sun4i-a10-lradc-keys"; |
| 632 |
reg = <0x01c22800 0x100>; |
| 633 |
interrupts = <31>; |
| 634 |
status = "disabled"; |
| 635 |
}; |
| 636 |
|
| 637 |
codec: codec@1c22c00 { |
| 638 |
#sound-dai-cells = <0>; |
| 639 |
compatible = "allwinner,sun4i-a10-codec"; |
| 640 |
reg = <0x01c22c00 0x40>; |
| 641 |
interrupts = <30>; |
| 642 |
clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>; |
| 643 |
clock-names = "apb", "codec"; |
| 644 |
dmas = <&dma SUN4I_DMA_NORMAL 19>, |
| 645 |
<&dma SUN4I_DMA_NORMAL 19>; |
| 646 |
dma-names = "rx", "tx"; |
| 647 |
status = "disabled"; |
| 648 |
}; |
| 649 |
|
| 650 |
sid: eeprom@1c23800 { |
| 651 |
compatible = "allwinner,sun4i-a10-sid"; |
| 652 |
reg = <0x01c23800 0x10>; |
| 653 |
}; |
| 654 |
|
| 655 |
rtp: rtp@1c25000 { |
| 656 |
compatible = "allwinner,sun5i-a13-ts"; |
| 657 |
reg = <0x01c25000 0x100>; |
| 658 |
interrupts = <29>; |
| 659 |
#thermal-sensor-cells = <0>; |
| 660 |
}; |
| 661 |
|
| 662 |
uart0: serial@1c28000 { |
| 663 |
compatible = "snps,dw-apb-uart"; |
| 664 |
reg = <0x01c28000 0x400>; |
| 665 |
interrupts = <1>; |
| 666 |
reg-shift = <2>; |
| 667 |
reg-io-width = <4>; |
| 668 |
clocks = <&ccu CLK_APB1_UART0>; |
| 669 |
status = "disabled"; |
| 670 |
}; |
| 671 |
|
| 672 |
uart1: serial@1c28400 { |
| 673 |
compatible = "snps,dw-apb-uart"; |
| 674 |
reg = <0x01c28400 0x400>; |
| 675 |
interrupts = <2>; |
| 676 |
reg-shift = <2>; |
| 677 |
reg-io-width = <4>; |
| 678 |
clocks = <&ccu CLK_APB1_UART1>; |
| 679 |
status = "disabled"; |
| 680 |
}; |
| 681 |
|
| 682 |
uart2: serial@1c28800 { |
| 683 |
compatible = "snps,dw-apb-uart"; |
| 684 |
reg = <0x01c28800 0x400>; |
| 685 |
interrupts = <3>; |
| 686 |
reg-shift = <2>; |
| 687 |
reg-io-width = <4>; |
| 688 |
clocks = <&ccu CLK_APB1_UART2>; |
| 689 |
status = "disabled"; |
| 690 |
}; |
| 691 |
|
| 692 |
uart3: serial@1c28c00 { |
| 693 |
compatible = "snps,dw-apb-uart"; |
| 694 |
reg = <0x01c28c00 0x400>; |
| 695 |
interrupts = <4>; |
| 696 |
reg-shift = <2>; |
| 697 |
reg-io-width = <4>; |
| 698 |
clocks = <&ccu CLK_APB1_UART3>; |
| 699 |
status = "disabled"; |
| 700 |
}; |
| 701 |
|
| 702 |
i2c0: i2c@1c2ac00 { |
| 703 |
compatible = "allwinner,sun4i-a10-i2c"; |
| 704 |
reg = <0x01c2ac00 0x400>; |
| 705 |
interrupts = <7>; |
| 706 |
clocks = <&ccu CLK_APB1_I2C0>; |
| 707 |
pinctrl-names = "default"; |
| 708 |
pinctrl-0 = <&i2c0_pins>; |
| 709 |
status = "disabled"; |
| 710 |
#address-cells = <1>; |
| 711 |
#size-cells = <0>; |
| 712 |
}; |
| 713 |
|
| 714 |
i2c1: i2c@1c2b000 { |
| 715 |
compatible = "allwinner,sun4i-a10-i2c"; |
| 716 |
reg = <0x01c2b000 0x400>; |
| 717 |
interrupts = <8>; |
| 718 |
clocks = <&ccu CLK_APB1_I2C1>; |
| 719 |
pinctrl-names = "default"; |
| 720 |
pinctrl-0 = <&i2c1_pins>; |
| 721 |
status = "disabled"; |
| 722 |
#address-cells = <1>; |
| 723 |
#size-cells = <0>; |
| 724 |
}; |
| 725 |
|
| 726 |
i2c2: i2c@1c2b400 { |
| 727 |
compatible = "allwinner,sun4i-a10-i2c"; |
| 728 |
reg = <0x01c2b400 0x400>; |
| 729 |
interrupts = <9>; |
| 730 |
clocks = <&ccu CLK_APB1_I2C2>; |
| 731 |
pinctrl-names = "default"; |
| 732 |
pinctrl-0 = <&i2c2_pins>; |
| 733 |
status = "disabled"; |
| 734 |
#address-cells = <1>; |
| 735 |
#size-cells = <0>; |
| 736 |
}; |
| 737 |
|
| 738 |
mali: gpu@1c40000 { |
| 739 |
compatible = "allwinner,sun4i-a10-mali", "arm,mali-400"; |
| 740 |
reg = <0x01c40000 0x10000>; |
| 741 |
interrupts = <69>, <70>, <71>, <72>, <73>; |
| 742 |
interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pmu"; |
| 743 |
clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>; |
| 744 |
clock-names = "bus", "core"; |
| 745 |
resets = <&ccu RST_GPU>; |
| 746 |
assigned-clocks = <&ccu CLK_GPU>; |
| 747 |
assigned-clock-rates = <320000000>; |
| 748 |
}; |
| 749 |
|
| 750 |
timer@1c60000 { |
| 751 |
compatible = "allwinner,sun5i-a13-hstimer"; |
| 752 |
reg = <0x01c60000 0x1000>; |
| 753 |
interrupts = <82>, <83>; |
| 754 |
clocks = <&ccu CLK_AHB_HSTIMER>; |
| 755 |
}; |
| 756 |
|
| 757 |
fe0: display-frontend@1e00000 { |
| 758 |
compatible = "allwinner,sun5i-a13-display-frontend"; |
| 759 |
reg = <0x01e00000 0x20000>; |
| 760 |
interrupts = <47>; |
| 761 |
clocks = <&ccu CLK_DE_FE>, <&ccu CLK_DE_FE>, |
| 762 |
<&ccu CLK_DRAM_DE_FE>; |
| 763 |
clock-names = "ahb", "mod", |
| 764 |
"ram"; |
| 765 |
resets = <&ccu RST_DE_FE>; |
| 766 |
interconnects = <&mbus 19>; |
| 767 |
interconnect-names = "dma-mem"; |
| 768 |
status = "disabled"; |
| 769 |
|
| 770 |
ports { |
| 771 |
#address-cells = <1>; |
| 772 |
#size-cells = <0>; |
| 773 |
|
| 774 |
fe0_out: port@1 { |
| 775 |
reg = <1>; |
| 776 |
|
| 777 |
fe0_out_be0: endpoint { |
| 778 |
remote-endpoint = <&be0_in_fe0>; |
| 779 |
}; |
| 780 |
}; |
| 781 |
}; |
| 782 |
}; |
| 783 |
|
| 784 |
be0: display-backend@1e60000 { |
| 785 |
compatible = "allwinner,sun5i-a13-display-backend"; |
| 786 |
reg = <0x01e60000 0x10000>; |
| 787 |
interrupts = <47>; |
| 788 |
clocks = <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>, |
| 789 |
<&ccu CLK_DRAM_DE_BE>; |
| 790 |
clock-names = "ahb", "mod", |
| 791 |
"ram"; |
| 792 |
resets = <&ccu RST_DE_BE>; |
| 793 |
interconnects = <&mbus 18>; |
| 794 |
interconnect-names = "dma-mem"; |
| 795 |
status = "disabled"; |
| 796 |
|
| 797 |
ports { |
| 798 |
#address-cells = <1>; |
| 799 |
#size-cells = <0>; |
| 800 |
|
| 801 |
be0_in: port@0 { |
| 802 |
reg = <0>; |
| 803 |
|
| 804 |
be0_in_fe0: endpoint { |
| 805 |
remote-endpoint = <&fe0_out_be0>; |
| 806 |
}; |
| 807 |
}; |
| 808 |
|
| 809 |
be0_out: port@1 { |
| 810 |
reg = <1>; |
| 811 |
|
| 812 |
be0_out_tcon0: endpoint { |
| 813 |
remote-endpoint = <&tcon0_in_be0>; |
| 814 |
}; |
| 815 |
}; |
| 816 |
}; |
| 817 |
}; |
| 818 |
}; |
| 819 |
}; |