| 1 |
/* |
| 2 |
* Copyright (C) 2015 Jens Kuske <[email protected]> |
| 3 |
* |
| 4 |
* This file is dual-licensed: you can use it either under the terms |
| 5 |
* of the GPL or the X11 license, at your option. Note that this dual |
| 6 |
* licensing only applies to this file, and not this project as a |
| 7 |
* whole. |
| 8 |
* |
| 9 |
* a) This file is free software; you can redistribute it and/or |
| 10 |
* modify it under the terms of the GNU General Public License as |
| 11 |
* published by the Free Software Foundation; either version 2 of the |
| 12 |
* License, or (at your option) any later version. |
| 13 |
* |
| 14 |
* This file is distributed in the hope that it will be useful, |
| 15 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 16 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 17 |
* GNU General Public License for more details. |
| 18 |
* |
| 19 |
* Or, alternatively, |
| 20 |
* |
| 21 |
* b) Permission is hereby granted, free of charge, to any person |
| 22 |
* obtaining a copy of this software and associated documentation |
| 23 |
* files (the "Software"), to deal in the Software without |
| 24 |
* restriction, including without limitation the rights to use, |
| 25 |
* copy, modify, merge, publish, distribute, sublicense, and/or |
| 26 |
* sell copies of the Software, and to permit persons to whom the |
| 27 |
* Software is furnished to do so, subject to the following |
| 28 |
* conditions: |
| 29 |
* |
| 30 |
* The above copyright notice and this permission notice shall be |
| 31 |
* included in all copies or substantial portions of the Software. |
| 32 |
* |
| 33 |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 34 |
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| 35 |
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 36 |
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| 37 |
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| 38 |
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| 39 |
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| 40 |
* OTHER DEALINGS IN THE SOFTWARE. |
| 41 |
*/ |
| 42 |
|
| 43 |
#include "sunxi-h3-h5.dtsi" |
| 44 |
#include <dt-bindings/thermal/thermal.h> |
| 45 |
|
| 46 |
/ { |
| 47 |
cpu0_opp_table: opp-table-cpu { |
| 48 |
compatible = "operating-points-v2"; |
| 49 |
opp-shared; |
| 50 |
|
| 51 |
opp-648000000 { |
| 52 |
opp-hz = /bits/ 64 <648000000>; |
| 53 |
opp-microvolt = <1040000 1040000 1300000>; |
| 54 |
clock-latency-ns = <244144>; /* 8 32k periods */ |
| 55 |
}; |
| 56 |
|
| 57 |
opp-816000000 { |
| 58 |
opp-hz = /bits/ 64 <816000000>; |
| 59 |
opp-microvolt = <1100000 1100000 1300000>; |
| 60 |
clock-latency-ns = <244144>; /* 8 32k periods */ |
| 61 |
}; |
| 62 |
|
| 63 |
opp-1008000000 { |
| 64 |
opp-hz = /bits/ 64 <1008000000>; |
| 65 |
opp-microvolt = <1200000 1200000 1300000>; |
| 66 |
clock-latency-ns = <244144>; /* 8 32k periods */ |
| 67 |
}; |
| 68 |
}; |
| 69 |
|
| 70 |
cpus { |
| 71 |
#address-cells = <1>; |
| 72 |
#size-cells = <0>; |
| 73 |
|
| 74 |
cpu0: cpu@0 { |
| 75 |
compatible = "arm,cortex-a7"; |
| 76 |
device_type = "cpu"; |
| 77 |
reg = <0>; |
| 78 |
clocks = <&ccu CLK_CPUX>; |
| 79 |
clock-names = "cpu"; |
| 80 |
operating-points-v2 = <&cpu0_opp_table>; |
| 81 |
#cooling-cells = <2>; |
| 82 |
}; |
| 83 |
|
| 84 |
cpu1: cpu@1 { |
| 85 |
compatible = "arm,cortex-a7"; |
| 86 |
device_type = "cpu"; |
| 87 |
reg = <1>; |
| 88 |
clocks = <&ccu CLK_CPUX>; |
| 89 |
clock-names = "cpu"; |
| 90 |
operating-points-v2 = <&cpu0_opp_table>; |
| 91 |
#cooling-cells = <2>; |
| 92 |
}; |
| 93 |
|
| 94 |
cpu2: cpu@2 { |
| 95 |
compatible = "arm,cortex-a7"; |
| 96 |
device_type = "cpu"; |
| 97 |
reg = <2>; |
| 98 |
clocks = <&ccu CLK_CPUX>; |
| 99 |
clock-names = "cpu"; |
| 100 |
operating-points-v2 = <&cpu0_opp_table>; |
| 101 |
#cooling-cells = <2>; |
| 102 |
}; |
| 103 |
|
| 104 |
cpu3: cpu@3 { |
| 105 |
compatible = "arm,cortex-a7"; |
| 106 |
device_type = "cpu"; |
| 107 |
reg = <3>; |
| 108 |
clocks = <&ccu CLK_CPUX>; |
| 109 |
clock-names = "cpu"; |
| 110 |
operating-points-v2 = <&cpu0_opp_table>; |
| 111 |
#cooling-cells = <2>; |
| 112 |
}; |
| 113 |
}; |
| 114 |
|
| 115 |
gpu_opp_table: opp-table-gpu { |
| 116 |
compatible = "operating-points-v2"; |
| 117 |
|
| 118 |
opp-120000000 { |
| 119 |
opp-hz = /bits/ 64 <120000000>; |
| 120 |
}; |
| 121 |
|
| 122 |
opp-312000000 { |
| 123 |
opp-hz = /bits/ 64 <312000000>; |
| 124 |
}; |
| 125 |
|
| 126 |
opp-432000000 { |
| 127 |
opp-hz = /bits/ 64 <432000000>; |
| 128 |
}; |
| 129 |
|
| 130 |
opp-576000000 { |
| 131 |
opp-hz = /bits/ 64 <576000000>; |
| 132 |
}; |
| 133 |
}; |
| 134 |
|
| 135 |
pmu { |
| 136 |
compatible = "arm,cortex-a7-pmu"; |
| 137 |
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, |
| 138 |
<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, |
| 139 |
<GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, |
| 140 |
<GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; |
| 141 |
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; |
| 142 |
}; |
| 143 |
|
| 144 |
timer { |
| 145 |
compatible = "arm,armv7-timer"; |
| 146 |
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 147 |
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 148 |
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 149 |
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; |
| 150 |
}; |
| 151 |
|
| 152 |
soc { |
| 153 |
deinterlace: deinterlace@1400000 { |
| 154 |
compatible = "allwinner,sun8i-h3-deinterlace"; |
| 155 |
reg = <0x01400000 0x20000>; |
| 156 |
clocks = <&ccu CLK_BUS_DEINTERLACE>, |
| 157 |
<&ccu CLK_DEINTERLACE>, |
| 158 |
<&ccu CLK_DRAM_DEINTERLACE>; |
| 159 |
clock-names = "bus", "mod", "ram"; |
| 160 |
resets = <&ccu RST_BUS_DEINTERLACE>; |
| 161 |
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; |
| 162 |
interconnects = <&mbus 9>; |
| 163 |
interconnect-names = "dma-mem"; |
| 164 |
}; |
| 165 |
|
| 166 |
syscon: system-control@1c00000 { |
| 167 |
compatible = "allwinner,sun8i-h3-system-control"; |
| 168 |
reg = <0x01c00000 0x1000>; |
| 169 |
#address-cells = <1>; |
| 170 |
#size-cells = <1>; |
| 171 |
ranges; |
| 172 |
|
| 173 |
sram_c: sram@1d00000 { |
| 174 |
compatible = "mmio-sram"; |
| 175 |
reg = <0x01d00000 0x80000>; |
| 176 |
#address-cells = <1>; |
| 177 |
#size-cells = <1>; |
| 178 |
ranges = <0 0x01d00000 0x80000>; |
| 179 |
|
| 180 |
ve_sram: sram-section@0 { |
| 181 |
compatible = "allwinner,sun8i-h3-sram-c1", |
| 182 |
"allwinner,sun4i-a10-sram-c1"; |
| 183 |
reg = <0x000000 0x80000>; |
| 184 |
}; |
| 185 |
}; |
| 186 |
}; |
| 187 |
|
| 188 |
video-codec@1c0e000 { |
| 189 |
compatible = "allwinner,sun8i-h3-video-engine"; |
| 190 |
reg = <0x01c0e000 0x1000>; |
| 191 |
clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>, |
| 192 |
<&ccu CLK_DRAM_VE>; |
| 193 |
clock-names = "ahb", "mod", "ram"; |
| 194 |
resets = <&ccu RST_BUS_VE>; |
| 195 |
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; |
| 196 |
allwinner,sram = <&ve_sram 1>; |
| 197 |
}; |
| 198 |
|
| 199 |
crypto: crypto@1c15000 { |
| 200 |
compatible = "allwinner,sun8i-h3-crypto"; |
| 201 |
reg = <0x01c15000 0x1000>; |
| 202 |
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; |
| 203 |
clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; |
| 204 |
clock-names = "bus", "mod"; |
| 205 |
resets = <&ccu RST_BUS_CE>; |
| 206 |
}; |
| 207 |
|
| 208 |
mali: gpu@1c40000 { |
| 209 |
compatible = "allwinner,sun8i-h3-mali", "arm,mali-400"; |
| 210 |
reg = <0x01c40000 0x10000>; |
| 211 |
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, |
| 212 |
<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, |
| 213 |
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, |
| 214 |
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, |
| 215 |
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, |
| 216 |
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, |
| 217 |
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; |
| 218 |
interrupt-names = "gp", |
| 219 |
"gpmmu", |
| 220 |
"pp0", |
| 221 |
"ppmmu0", |
| 222 |
"pp1", |
| 223 |
"ppmmu1", |
| 224 |
"pmu"; |
| 225 |
clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>; |
| 226 |
clock-names = "bus", "core"; |
| 227 |
resets = <&ccu RST_BUS_GPU>; |
| 228 |
operating-points-v2 = <&gpu_opp_table>; |
| 229 |
}; |
| 230 |
|
| 231 |
ths: thermal-sensor@1c25000 { |
| 232 |
compatible = "allwinner,sun8i-h3-ths"; |
| 233 |
reg = <0x01c25000 0x400>; |
| 234 |
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; |
| 235 |
resets = <&ccu RST_BUS_THS>; |
| 236 |
clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>; |
| 237 |
clock-names = "bus", "mod"; |
| 238 |
nvmem-cells = <&ths_calibration>; |
| 239 |
nvmem-cell-names = "calibration"; |
| 240 |
#thermal-sensor-cells = <0>; |
| 241 |
}; |
| 242 |
}; |
| 243 |
|
| 244 |
thermal-zones { |
| 245 |
cpu_thermal: cpu-thermal { |
| 246 |
polling-delay-passive = <0>; |
| 247 |
polling-delay = <0>; |
| 248 |
thermal-sensors = <&ths>; |
| 249 |
|
| 250 |
trips { |
| 251 |
cpu_hot_trip: cpu-hot { |
| 252 |
temperature = <80000>; |
| 253 |
hysteresis = <2000>; |
| 254 |
type = "passive"; |
| 255 |
}; |
| 256 |
|
| 257 |
cpu_very_hot_trip: cpu-very-hot { |
| 258 |
temperature = <100000>; |
| 259 |
hysteresis = <0>; |
| 260 |
type = "critical"; |
| 261 |
}; |
| 262 |
}; |
| 263 |
|
| 264 |
cooling-maps { |
| 265 |
map0 { |
| 266 |
trip = <&cpu_hot_trip>; |
| 267 |
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 268 |
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 269 |
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| 270 |
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| 271 |
}; |
| 272 |
}; |
| 273 |
}; |
| 274 |
}; |
| 275 |
}; |
| 276 |
|
| 277 |
&ccu { |
| 278 |
compatible = "allwinner,sun8i-h3-ccu"; |
| 279 |
}; |
| 280 |
|
| 281 |
&display_clocks { |
| 282 |
compatible = "allwinner,sun8i-h3-de2-clk"; |
| 283 |
}; |
| 284 |
|
| 285 |
&mbus { |
| 286 |
compatible = "allwinner,sun8i-h3-mbus"; |
| 287 |
}; |
| 288 |
|
| 289 |
&mmc0 { |
| 290 |
compatible = "allwinner,sun7i-a20-mmc"; |
| 291 |
clocks = <&ccu CLK_BUS_MMC0>, |
| 292 |
<&ccu CLK_MMC0>, |
| 293 |
<&ccu CLK_MMC0_OUTPUT>, |
| 294 |
<&ccu CLK_MMC0_SAMPLE>; |
| 295 |
clock-names = "ahb", |
| 296 |
"mmc", |
| 297 |
"output", |
| 298 |
"sample"; |
| 299 |
}; |
| 300 |
|
| 301 |
&mmc1 { |
| 302 |
compatible = "allwinner,sun7i-a20-mmc"; |
| 303 |
clocks = <&ccu CLK_BUS_MMC1>, |
| 304 |
<&ccu CLK_MMC1>, |
| 305 |
<&ccu CLK_MMC1_OUTPUT>, |
| 306 |
<&ccu CLK_MMC1_SAMPLE>; |
| 307 |
clock-names = "ahb", |
| 308 |
"mmc", |
| 309 |
"output", |
| 310 |
"sample"; |
| 311 |
}; |
| 312 |
|
| 313 |
&mmc2 { |
| 314 |
compatible = "allwinner,sun7i-a20-mmc"; |
| 315 |
clocks = <&ccu CLK_BUS_MMC2>, |
| 316 |
<&ccu CLK_MMC2>, |
| 317 |
<&ccu CLK_MMC2_OUTPUT>, |
| 318 |
<&ccu CLK_MMC2_SAMPLE>; |
| 319 |
clock-names = "ahb", |
| 320 |
"mmc", |
| 321 |
"output", |
| 322 |
"sample"; |
| 323 |
}; |
| 324 |
|
| 325 |
&pio { |
| 326 |
compatible = "allwinner,sun8i-h3-pinctrl"; |
| 327 |
}; |
| 328 |
|
| 329 |
&rtc { |
| 330 |
compatible = "allwinner,sun8i-h3-rtc"; |
| 331 |
}; |
| 332 |
|
| 333 |
&sid { |
| 334 |
compatible = "allwinner,sun8i-h3-sid"; |
| 335 |
}; |