| 1 |
/* |
| 2 |
* Copyright 2014 Hans de Goede <[email protected]> |
| 3 |
* |
| 4 |
* This file is dual-licensed: you can use it either under the terms |
| 5 |
* of the GPL or the X11 license, at your option. Note that this dual |
| 6 |
* licensing only applies to this file, and not this project as a |
| 7 |
* whole. |
| 8 |
* |
| 9 |
* a) This file is free software; you can redistribute it and/or |
| 10 |
* modify it under the terms of the GNU General Public License as |
| 11 |
* published by the Free Software Foundation; either version 2 of the |
| 12 |
* License, or (at your option) any later version. |
| 13 |
* |
| 14 |
* This file is distributed in the hope that it will be useful, |
| 15 |
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 16 |
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 17 |
* GNU General Public License for more details. |
| 18 |
* |
| 19 |
* Or, alternatively, |
| 20 |
* |
| 21 |
* b) Permission is hereby granted, free of charge, to any person |
| 22 |
* obtaining a copy of this software and associated documentation |
| 23 |
* files (the "Software"), to deal in the Software without |
| 24 |
* restriction, including without limitation the rights to use, |
| 25 |
* copy, modify, merge, publish, distribute, sublicense, and/or |
| 26 |
* sell copies of the Software, and to permit persons to whom the |
| 27 |
* Software is furnished to do so, subject to the following |
| 28 |
* conditions: |
| 29 |
* |
| 30 |
* The above copyright notice and this permission notice shall be |
| 31 |
* included in all copies or substantial portions of the Software. |
| 32 |
* |
| 33 |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 34 |
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| 35 |
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 36 |
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| 37 |
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| 38 |
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| 39 |
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| 40 |
* OTHER DEALINGS IN THE SOFTWARE. |
| 41 |
*/ |
| 42 |
|
| 43 |
/dts-v1/; |
| 44 |
#include "sun6i-a31.dtsi" |
| 45 |
#include "sunxi-common-regulators.dtsi" |
| 46 |
|
| 47 |
#include <dt-bindings/gpio/gpio.h> |
| 48 |
|
| 49 |
/ { |
| 50 |
model = "Mele A1000G Quad top set box"; |
| 51 |
compatible = "mele,a1000g-quad", "allwinner,sun6i-a31"; |
| 52 |
|
| 53 |
aliases { |
| 54 |
serial0 = &uart0; |
| 55 |
}; |
| 56 |
|
| 57 |
chosen { |
| 58 |
stdout-path = "serial0:115200n8"; |
| 59 |
}; |
| 60 |
|
| 61 |
leds { |
| 62 |
compatible = "gpio-leds"; |
| 63 |
|
| 64 |
led { |
| 65 |
label = "a1000g:blue:pwr"; |
| 66 |
gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; |
| 67 |
default-state = "on"; |
| 68 |
}; |
| 69 |
}; |
| 70 |
}; |
| 71 |
|
| 72 |
&cpu0 { |
| 73 |
cpu-supply = <®_dcdc3>; |
| 74 |
}; |
| 75 |
|
| 76 |
&ehci0 { |
| 77 |
status = "okay"; |
| 78 |
}; |
| 79 |
|
| 80 |
&ehci1 { |
| 81 |
status = "okay"; |
| 82 |
}; |
| 83 |
|
| 84 |
&gmac { |
| 85 |
pinctrl-names = "default"; |
| 86 |
pinctrl-0 = <&gmac_mii_pins>; |
| 87 |
phy-handle = <&phy1>; |
| 88 |
phy-mode = "mii"; |
| 89 |
phy-supply = <®_dldo1>; |
| 90 |
status = "okay"; |
| 91 |
}; |
| 92 |
|
| 93 |
&ir { |
| 94 |
pinctrl-names = "default"; |
| 95 |
pinctrl-0 = <&s_ir_rx_pin>; |
| 96 |
status = "okay"; |
| 97 |
}; |
| 98 |
|
| 99 |
&mdio { |
| 100 |
phy1: ethernet-phy@1 { |
| 101 |
reg = <1>; |
| 102 |
}; |
| 103 |
}; |
| 104 |
|
| 105 |
&mmc0 { |
| 106 |
vmmc-supply = <®_dcdc1>; |
| 107 |
bus-width = <4>; |
| 108 |
cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */ |
| 109 |
status = "okay"; |
| 110 |
}; |
| 111 |
|
| 112 |
&p2wi { |
| 113 |
status = "okay"; |
| 114 |
|
| 115 |
axp22x: pmic@68 { |
| 116 |
compatible = "x-powers,axp221"; |
| 117 |
reg = <0x68>; |
| 118 |
interrupt-parent = <&r_intc>; |
| 119 |
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; |
| 120 |
}; |
| 121 |
}; |
| 122 |
|
| 123 |
#include "axp22x.dtsi" |
| 124 |
|
| 125 |
®_aldo1 { |
| 126 |
regulator-min-microvolt = <3300000>; |
| 127 |
regulator-max-microvolt = <3300000>; |
| 128 |
regulator-name = "vcc-wifi"; |
| 129 |
}; |
| 130 |
|
| 131 |
®_aldo3 { |
| 132 |
regulator-always-on; |
| 133 |
regulator-min-microvolt = <2700000>; |
| 134 |
regulator-max-microvolt = <3300000>; |
| 135 |
regulator-name = "avcc"; |
| 136 |
}; |
| 137 |
|
| 138 |
®_dc5ldo { |
| 139 |
regulator-always-on; |
| 140 |
regulator-min-microvolt = <700000>; |
| 141 |
regulator-max-microvolt = <1320000>; |
| 142 |
regulator-name = "vdd-cpus"; /* This is an educated guess */ |
| 143 |
}; |
| 144 |
|
| 145 |
®_dcdc1 { |
| 146 |
regulator-always-on; |
| 147 |
regulator-min-microvolt = <3300000>; |
| 148 |
regulator-max-microvolt = <3300000>; |
| 149 |
regulator-name = "vcc-3v3"; |
| 150 |
}; |
| 151 |
|
| 152 |
®_dcdc2 { |
| 153 |
regulator-min-microvolt = <700000>; |
| 154 |
regulator-max-microvolt = <1320000>; |
| 155 |
regulator-name = "vdd-gpu"; |
| 156 |
}; |
| 157 |
|
| 158 |
®_dcdc3 { |
| 159 |
regulator-always-on; |
| 160 |
regulator-min-microvolt = <700000>; |
| 161 |
regulator-max-microvolt = <1320000>; |
| 162 |
regulator-name = "vdd-cpu"; |
| 163 |
}; |
| 164 |
|
| 165 |
®_dcdc4 { |
| 166 |
regulator-always-on; |
| 167 |
regulator-min-microvolt = <700000>; |
| 168 |
regulator-max-microvolt = <1320000>; |
| 169 |
regulator-name = "vdd-sys-dll"; |
| 170 |
}; |
| 171 |
|
| 172 |
®_dcdc5 { |
| 173 |
regulator-always-on; |
| 174 |
regulator-min-microvolt = <1500000>; |
| 175 |
regulator-max-microvolt = <1500000>; |
| 176 |
regulator-name = "vcc-dram"; |
| 177 |
}; |
| 178 |
|
| 179 |
®_dldo1 { |
| 180 |
regulator-min-microvolt = <3300000>; |
| 181 |
regulator-max-microvolt = <3300000>; |
| 182 |
regulator-name = "vcc-ethernet-phy"; |
| 183 |
}; |
| 184 |
|
| 185 |
/* |
| 186 |
* Both reg_usb1_vbus and reg_dldo4 need to be on for the hub attached |
| 187 |
* to usb1 to work, and we can list only one usb1_vbus-supply, so dldo4 is |
| 188 |
* marked as regulator-always-on. |
| 189 |
*/ |
| 190 |
®_dldo4 { |
| 191 |
regulator-always-on; |
| 192 |
regulator-min-microvolt = <3300000>; |
| 193 |
regulator-max-microvolt = <3300000>; |
| 194 |
regulator-name = "vcc-usb-hub"; |
| 195 |
}; |
| 196 |
|
| 197 |
®_usb1_vbus { |
| 198 |
gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>; |
| 199 |
status = "okay"; |
| 200 |
}; |
| 201 |
|
| 202 |
&uart0 { |
| 203 |
pinctrl-names = "default"; |
| 204 |
pinctrl-0 = <&uart0_ph_pins>; |
| 205 |
status = "okay"; |
| 206 |
}; |
| 207 |
|
| 208 |
&usb_otg { |
| 209 |
dr_mode = "host"; |
| 210 |
status = "okay"; |
| 211 |
}; |
| 212 |
|
| 213 |
&usbphy { |
| 214 |
usb1_vbus-supply = <®_usb1_vbus>; |
| 215 |
usb2_vbus-supply = <®_aldo1>; |
| 216 |
status = "okay"; |
| 217 |
}; |